Turn red LED light off

Is there an option or registry edit that will turn off the red led light that dots the "i" in ThinkPad on the top of the laptop? I have a SL500.

Hi adoman,
I suggest putting following sticker on it, you'll never notice it's there:- http://cgi.ebay.com/Original-IBM-Lenovo-Sticker-11​-x-30mm-127_W0QQitemZ350223067619QQcmdZViewItemQQp​...
Hope it helps.
Maliha (I don't work for lenovo)
ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]
IdeaPad: U350
Apple:- Macbook Air [Snow Leopard]
Did someone help you today? Compliment them with a Kudos!
Was your question answered today? Mark it as an Accepted Solution! 
  Lenovo Deutsche Community     Lenovo Comunidad en Español 
Visit my YouTube Channel

Similar Messages

  • My bb curve 9380 shutdown and a red led lighting

     my bb curve 9380 shutdown and a red led lighting i don't now what hapned but i just modify some apps bay bb desktop softwere please help me and thx verry much

    Hi and Welcome to the Community!
    Please try this sequence...note that, throughout the entire 4h15m process, your BB must remain connected to a known-good wall charger (not PC USB):
    With the battery inside, connect your BB to the wall charger
    Leave it alone for 2 hours, no matter what the LED or the display does
    Remove the battery
    Wait 15 minutes
    Insert the battery
    Wait another 2 hours, no matter what the LED or the display does
    This has been known to "kick start" some BBs.
    It is also possible that your battery or BB has experienced a problem...to test, this sequence is needed:
    Obtain an known good and already fully charged additional battery...use it in your BB and see what happens
    Obtain access to a known good and identical BB...use your battery in it and see what happens
    The results of this will indicate if it's your BB or your battery that has the problem.
    If the problem is revealed via the above tests to be your BB, then I recommend that you attempt to boot into Safe Mode:
    KB17877 How to start a BlackBerry smartphone in Safe Mode
    It may take you multiple attempts to get the ESC key sequence (press/release/hold) correct, so be patient. When successfully into Safe Mode, see what happens.
    If the behavior ceases, then think carefully...what happened just before this behavior started? A new app? An update? A Theme? Something else? Think carefully as the smallest change could be causal...and attempt to undo whatever that was.
    But if the behavior continues in Safe Mode, then you may need to consider more drastic actions -- WIPE, OS Reload, BBSAK Wipe/Reload, and the "Bare Bones" OS Reload Process. To prepare, you should be sure that you have a full backup to your PC...please review the Backup link in my auto-sig on this post for instructions.
    You may also need the use of these tricks:
    KB10144 How to force the detection of the BlackBerry smartphone using Application Loader
    KB27956 How to recover a BlackBerry smartphone from any state
    http://crackberry.com/blackberry-101-lecture-12-how-reload-operating-system-nuked-blackberry
    Good luck and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • BlackBerry Z3 does not Boot, red LED Light is flashing 1x long and after 6x short

    After updating my Blackbery Z3 to 10.3.1.1779, my device won't boot and  red LED Light is flashing 1x long and after 6x short. Need help to solve the issue. Thanks in advance.

    Thank you for your update.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Red Led Light

    Hi, I have bought this laptop which is fairly new, just under a year. Although now, there is an red Led light on the side of my laptop when I plug in my Ac Adaptor to charge the battery and it is not going. The Led Light was always a bright white light but now it just stays red and I dont know why? Is there a problem with my laptop? because it is working fine. I dont know how to solve the red led light or what it means. I hope I can get some information about this. Thank You.

    jpdvid-
    Did you try starting the Mac back up after installing the RAM and before installing the card? Many times a PMU reset is needed after RAM is installed.
    Which model of Rocket Raid card are you installing?
    Luck-
    -DaddyPaycheck

  • Red LED Light Remains On

    The battery is fully charged and disconnected from charger.  When hibernating, the red LED light constantly remains on.  When the phone is being used, the red LED light does not appear.
    What is wrong? How can this be fixed?  Thanks much for help.

    I'm a total newbie to smartphones.  Based on your question, I cleared all the Notifications and the red LED disappeared.  Then sent myself an email to test the blue LED light and it is now blinking.  So, the problem might be solved but don;t know why the red LED constantly displayed after charging the battering to 100%.  
    Don't know about Lightflow!
    Thanks

  • HELP! BB Pearl 8130. Solid Red Led Light. Won't go away.. HELP!

    My LED has turned a solid Red color. It's on all the time and is only off when I pull the battery out. My phone does still charge. I've done everything to get rid of it even wiping my blackberry and upgrading the software. I read something about Blackberry Music Gateway? I do use my pearl to listen to Pandora everyday and iheart radio with a 3.5 cable that plugs into the dash of my truck, but it never did this before. Any help would be greatly appreciated!
    Thanks!
    Justin

    Justin, so you've wiped the device completely and reloaded a new OS... still does the same. Anytime the BlackBerry is powerd on, the LED lights up RED?
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • 4 Red Led Lights - Please help

    the other day I left my computer on for a few hours and when I came home and moved the mouse it wouldn't come out of standby.  To get it to shut off, I had to hold the power button down.  Now when I start it, the fans start spinning, the DVD drive spins for a second and a few times the orange light on the monitor turned green.  But after about 10 seconds, it shuts down.
    I have the 4 red lights on the LED, so I swapped in a new PS - Enermax 550W with 36A on the 12v.  Still same thing.  So I'm guessing either the CPU or the board.  I built this about 6 months ago.  It's not overclocked and it was idle during the time I left it.  Any suggestions?

    Yes and no. I know that is confussing. However go to this first as you may have had a problem right along and did not know it nor would you without testing.  Memtest86 is a great way to test memory. The no part is that it could be something else. But hey you have to start somewhere.
    As for the timings in RAM you need to go to Corsairs page and check the exact model on their charts. Also be sure to read any side notes as they may have specific timings for your A64 versus other CPU's. It can be different as the memory controller is on the CPU in our case instead of on the MB.
    Corsair also has tech support that can walk you through memory timings if you don't follow them at all.
    You can also have some other thing in the system that went bad even as simple as a HDD cable that came loose. To troubleshoot sometimes the easiest way to find out is to unplug anything that is not needed to boot.
    But start with the memory as the 4 Red LED's indicate.

  • Playbook will not charge, no red LED light

    The Battery charge said 3%. I turned off the playbook and plugged it in and left it to charge with the LED lights  showing. I went to retrieve it, only to find out it's not turning on. No red light appeared. nothing. I went and  plugged it in and then tried turning it on  Nothing.No red light...just dead.  PS: I just got the Playbook from relative without the manual and all so i'm not sure about the DO's and DON"T's of using the tablet.  Please help!!!  Thanks in Advance. 

    Your battery is dead. http://www.blackberry.com/btsc/KB27705
    Try this:
    Connect the charger that came with the PlayBook and plug it into the wall. Hold down the Power Button only for 20 seconds. Leave it for 4 minutes, then unplug at the wall, wait a minute, plug it back in again, hold down the Power Button only for 20 seconds.
    Repeat this process about 10 times and hopefully, your PlayBook should go into a high charging rate. Leave it plugged in overnight and you should have a full charge by morning.
    1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
    2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

  • Hp pavillion dv7-3065 laptop will not turn on - led light blinks, ac's light on?

    HP Pavillion dv7-3065 with Windows 7.
    I fell asleep two days ago, and when I woke up yesterday, my laptop was off. (The battery very well may have died while I was sleeping, or just shut off on its own. I don't know which.) I tried turning it on, but nothing happened... except for the lightning bolt (LED light) blinking three times. No noises inside, blank screen, nothing aside those three blinks.
    For the record, I've already tried removing the battery. I've also tried removing the battery, removing the AC cord, and holding in the power button for 30+ seconds. It didn't work.
    I've tried removing the battery and running off AC. This still doesn't work. However, the laptop recognizes that it's plugged in; the little light by it is consistantly on. I've also tested my laptop with another AC adapter just to be safe. Nothing.
    My laptop has been tested without harddrive/etc, but I'm still at a blank. I don't know what else to do. My boyfriend, who's in school to be an IT, took it into his teacher, who messed around with it, and came up with a few conclusions.
    He believes that because the lights are flashing, he's confidant that my motherboard is fine. He said to replace the battery, and if that doesn't work, solder the ...I forgot what exactly, but basically it's the charging connection. I forget what exactly. My apologies there.
    However... I feel like replacing the battery would be a waste of money... Because regardless of battery, the laptop should still turn on with the AC cord. My boyfriend intends to bring this up and ask if he can just skip to the other thing anyway, but he doesn't have that class again for a week, and I'm at a loss of what else to do. Aside from that, his teacher says there's a limited number of other things that could be wrong...
    I was hoping to get some more input... 

    This won't help you out, but I am experiencing the same problem... I am gonna look on this post to see if you get an answer!
    I have the same problem! Except I did manage to get mine to turn on. After doing the hold the power down thing. Nothing happened. I did leave the lap top on cause I was irritated and walked away, about an hour later it came on. It let me turn it on and off a few times. Then stopped. Then leaving it sit on stopped working too

  • Mysterious red LED light inside my G4

    Could someone tell me what the red light means on the inside of my G4?
    It can't be seen from the outside.
    I am having a problem with my firewire ports not working. Is this a warning or alert of some kind?
    Help! I really looked and can't find this info anywhere!

    From the G4 Service Manual:
    Logic Board LEDs: Power Mac G4 (AGP Graphics)
    There is one red LED on the Power Mac G4 (AGP Graphics) logic
    board. It indicates that there is power to the board and does not imply a fault condition. Hardware such as DIMMs and PCI cards should not be installed or removed when the LED is on.
    Cheers, Tom

  • BB 9320 - Screen goes black, LED light off and device unresponsi​ve for a 3-30 seconds, then repeats

    Hi there, 
    I got a BB 9320, then replaced it through the vendor for this same issue but it is still occuring. 
    When using my phone, fully charged or not, the screen will go black and LED light is off for a 3-30 seconds mid task and the device becomes completely unresponsive. It will eventually come back, and restart the task (ie, if i'm typing a txt messge, it will be back to the message inbox, or for an email back to my email inbox, etc.). It's really frustrating because at times it will continually happen for so long that I give up on using my bb entirely. 
    I have tried restarting the device to factory settings, removing the battery, keeping it continually charged, draining the battery entirely. 
    What is happening? How can I fix this??

    Hey makader,
    Welcome to the BlackBerry® Support Community Forums.
    I would suggest doing a clean reload of the BlackBerry® device software as shown here: http://btsc.webapps.blackberry.com/btsc/KB11320. Please test before restoring any data to the device.
    If this resolves the issue do a selective restore of essential data (Address Book, Calendar, Task, Memos, BBM contacts etc.)
    How to use BlackBerry® Desktop Software to restore data to a BlackBerry® smartphone from a backup file
    http://btsc.webapps.blackberry.com/btsc/KB10339.
    If the issue still persists after the reload, further investigation might be required. To help further diagnose the cause, contact your wireless service provider or BlackBerry® Technical Support Services for further review and support.
    Thank you
    -HB
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

  • BlackBerry Curve 9380 will not power ON and the red LED light is flashing

    I need you guy's help. I was charging my BlackBerry Curve 9380 this morning. When I was about to use it the found out that the screen will not light up but the red led indicator is blinking one long blink, one ong blink then a full stop. I have already tried removing the battery and sim card for sometime but to no avail. What should I do?!

    You need to consider updating/reinstalling device OS. Check the below knowledge base article -
    KB03621 How to clean reload BlackBerry Device software and applications using BlackBerry Desktop Software
    tanzim                                                                                  
    If your query is resolved then please click on “Accept as Solution”
    Click on the LIKE on the bottom right if the post deserves credit

  • Sony Xperia M2 flashing Red LED light and wont turn on.

    Okay so i have been having this problem for about a week.I tried turning on my phone the other day but it wasnt doing that so i thought maybe it ran out of battery then i let i charge for a couple of hours and left it untouched.When i came back my phone was flashing a red light and the sony logo would apear and my phone would vibrate but then it would shut down again.This has been happening for all week i let it charge overnight but still the same thing happens flashing red and vibrating.Sometimes the light dosent flash and i can turn my phone on for a while but i never know when it could randomly shut down.i tried using the Pc companion program to try and fix it but my phone wont stay on for long enough for it to be able to do that.Any tips on what i could do ? the last thing i wanna do right now is call sony so please if you know any possible way of fixing this let me know

    Hi and welcome to the community! Since you're new please be sure that you have checked out our Discussion guidelines.
    Have you tried to power on the phone without SIM- and/or SD-card to see if this can help? Otherwise, a software repair via PC Companion would be recommeded:
    http://support.sonymobile.com/global-en/tools/pc-companion/
    In PC Companion you press start on Support Zone > Start on Update the phone/tablet software > Repair phone/tablet (the blue clickable link in the message) > Follow these steps without having your device connected to the PC.
    Follow the instruction that appears in the program and do not connect your device until this guide tells you how to connect it. When you are going to connect the phone, the phone should be completely off. Hold the ON/OFF button + volume up(+) for 10 seconds.

  • How do you turn the camera light off

    Cannot get the camera light to turn off

        That's strange behavior for your iPhone, ddavis1727. Do you have a flashlight application installed on your phone? Have you tried turning your phone off and back on? What software version (Settings > General > About > Version) do you have on your phone?
    JenniferH_VZW
    Follow us on Twitter www.twitter.com/vzwsupport

  • Turn green isight light off when recording.

    hi there,
    I'm setting up a nanny cam with my laptop, and don't want the green light to be on when recording, how could i turn that off for the time being.
    thanks.
    tt

    Why not just cover it. Tiny piece of duck tape or sticky. Much simpler.
    The green light is always activated when the iSight is on. I know of no way of deactivating it while the iSight is on. You may wish to do a Google search for some hack that may do this.

Maybe you are looking for