Turn to active mode

Hi,
i tried to connect labview with wolidworks
but when i tried to convert to active mode i got this problem in the error
can any one help me ?
thanks
error
https://www.dropbox.com/s/89xxj1yc79h62l2/ddd.png
Solved!
Go to Solution.

Hi,
Please try the followings steps to clear that error:
Delete the contents of the following folder: C:\ProgramData\National Instruments\DeploymentFramework. Note that the ProgramData folder is hidden, so you may not see it if your folder options are set to not show hidden folders.
Close LabVIEW and repopen.
This should allow you to deploy and use your SolidWorks axes.
Thanks,
Paul B.
Motion Control R&D

Similar Messages

HT5624 when I turn my iMassage on it will go to activation mode for along time and then fails Whats teh problem ?!!

when I turn my iMassage on, it will go to activation mode for a long time and then fails. Whats the problem ?!!

Do you have a texting plan and are you connected to data when you try to activate? Check this support document for trouble with activating iMessage. http://support.apple.com/kb/TS4268

My iPhone 3gs backed up to the iCloud just fine, but my new iPhone 5 gives me an error and says to turn off airplane mode or use wi-fi. It is connected to my wi-fi and airplane mode is off. It can see the internet just fine. What gives?

I backed up my iPhone 3GS to iCloud. Activated my iPhone 5 and restored it from iCloud. But iPhone 5 will not backup to iCloud, only to my MacBook. When I try to turn it on on the phone it gives me an error that I must turn on Wi-Fi or turn off Airplane mode. Wi-Fi is on an the phone is talking to the internet just fine and airplane mode is off, but I still get the error. Is this a known problem?

You mean take the cover off of the iPhone, to look inside? I'd recommend against it. Even with warranty expired, you might qualify for an out-of-warranty service, which for 3GS is $149.
Other than that, any repair/service options are going to cost money. You might want to see if a wireless carrier will let you get a new contract & phone.
Out of curiousity, you're just using at as, basically, an iPod Touch, if there's no cell provider? Did I understand that correctly?

Active mode FTP access

Hi,
I have some problems accessing my hosted FTP server. It is hosted on Windows NT so Active Mode FTP is needed. However, when I access I can login but it will not conduct a directory listing. I tried the Terminal as well as Transmit applications. From a windows machine on same LAN it works. My FTP host claims it is a local issue which seems to be true.
Searching the forums it seems as "disabling firewall" would make it work. I did that, but it does not work still.
The error display in terminal is as follows:
My-iMac:~ troels$ ftp -A XXXXXXXXXX.dk
Connected to XXXXXXXXXX.dk.
220 Microsoft FTP Service
Name (XXXXXXXXXX:troels): xxxxx
331 Password required for xxxxx.
Password:
230 User xxxxx logged in.
Remote system type is Windows_NT.
ftp> ls
200 PORT command successful.
150 Opening ASCII mode data connection for /bin/ls.
ftp: Poll timeout waiting before accept
425 Can't open data connection.
500 '?ABOR': command not understood
ftp>
Thanks in advance.
Best
Troels

I think given that my router's NAT and SPI act as a robust firewall, I may as well just turn the OS X firewall off and 'solve' this problem.
Thanks for your help,
J
G5 Dual 2.0 (rev.B); 1.5 GB RAM; 160/250 GB HD Mac OS X (10.4.7) Ati Radeon 9600 XT; Smart-UPS 1500 VA; Dell 2007WFP LCD - MacBook 1.83 GHz

Current CC subscription turns into trial mode every other month... How to fix this once and for all?

Current my current always promptly paid CC subscription regularly turns into Trial mode. This means I can use Apps in trial mode (how nice...), ask me to get a paid subscription, and at the same time happily charges my credit card. This happens every other months. Then I have to discuss this with their agents, which usually takes days to weeks, because they don't know what's going on. How on earth can this be fixed one and for all?!
Thanks,
Hinnerk

Hinnerk do you have a case number from your previous contact with our support team that I can reference?
If you have a valid membership then please see Sign in, activation, or connection errors | CC, CS6, CS5.5 - http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html for information on how to resolve connection errors.

Satellite A660 wont start again until i turn to safe mode

Just purchase toshiba Satellite A660: i tell the story to compensate closely to my answer, hopefully ..
I just purchase it new, run the insallation program for first use. When its up and running just within that day i noticed that it start to hang up when i hooked external drive for some program installation (adobe lightroom).
Its still fine but when i turn it off, it wont start again until i did turn to safe mode so that i could back up some of the files and run the recovery again.
This time on 64bit. When its finish its process, it works well for just a couple of hours.
It fell faster now thou, maybe because its on 64bit? ( any recommendation whether its 32 or 64bit) specs: i5 , 4ram, 1g ddcatd graphics , win7 home premium, ..
Now, when i turn it off it never start back again windows say.. start up repair. ..
I did let it run since this morning until now still they cant find whats the problem (i'm refering the loptop) .
So any idea on whats goin ?

> It fell faster now thou, maybe because its on 64bit? ( any recommendation whether its 32 or 64bit) specs: i5 , 4ram, 1g ddcatd graphics , win7 home premium, ..
64bit Operating system is better if your notebook supports 4GB or more RAM.
Why? Because Win 32bit recognizes max 3.2GB even if more RAM is available.
This is 32bit limitation; no matter what OS it is; Linux, Win XP, Vista, Win7 etc
This is the reason why 64bit OS are so popular in the last time
Regarding the OS issue;
I recommend running a HDD recovery again... this means you should reinstall the OS usign the Toshiba recovery option;
Press F8 while powering up the notebook, Choose Repair my Computer, -> HDD recovery

Every time I start iTunes I get the message: "iTunes exec has been set to run in compatability mode for an older version of Windows. Turn off compatability mode for iTunes before you open it." How do I turn off the compatability mode?

Every time I start iTunes I get the message: "iTunes exec has been set to run in compatability mode for an older version of Windows. Turn off compatability mode for iTunes before you open it." How do I turn off the compatability mode? Particularly when I have to do it before I turn on iTunes.

Try the following document, only be sure that none of the boxes in the compatibility mode tab are checked (not just the compatibility mode box itself):
iTunes for Windows: How to turn off Compatibility Mode

Getting error message that states itunesexe has been set to run in compatibilty mode for an older versions of windows for best results turn off compatibility mode for itunes before you open it .How do i turn off compatibility mode?

recieved error message that states" itunes exe has been set to run in compatibility mode for an older versions of windows for best results turn off compatibility mode for itunes before you open it. How do i access compatibility mode and turn it off ? Believe i have Windows 7.

Try the following document, only be sure that none of the boxes in the compatibility tab are checked (not just the compatibility mode box itself):
iTunes for Windows: How to turn off Compatibility Mode

FTP client is not working in active mode

Hi,
I have a ftp issue trying to download iweb files.
My provider enabled me a ftp access.
I tried to connect to it with transmit or rbrowser ftp client (passive mode disabled). The connection works well but i can not retrieve the list of files.
However using my PC and filezilla ftp client in active mode, the connection did work properly.
Any idea to help make this connection work on my mac ?
Thanks

Perhaps this will help...
http://slacksite.com/other/ftp.html
"The main problem with active mode FTP actually falls on the client side. The FTP client doesn't make the actual connection to the data port of the server--it simply tells the server what port it is listening on and the server connects back to the specified port on the client. From the client side firewall this appears to be an outside system initiating a connection to an internal client--something that is usually blocked."

A month ago my iPhone was stolen, I turned on Activation Lock but it never came out BUT an hour ago somehow my apple ID was changed and someone removed from the account both iPhone and iPad and the iPad was also removely wiped. Can Apple help me somehow?

A month ago my iPhone was stolen, I turned on Activation Lock but it never came out BUT an hour ago somehow my apple ID was changed and someone removed from the account both my iPhone and iPad and the iPad was also remotely wiped. As soon as I saw it I recover the password and return the access to my iPad. But iPhone is not registered for my apple ID any longer. Can Apple help me somehow? I have all the documents and the iPhone box. Will they lock the iPhone and return me access to it. I'm sure it's been attached to another apple ID.
PS. the apple ID I'm using on the discussons is not the hacked one.

Try contacting the Apple account security team and ask: http://support.apple.com/kb/HT5699.

How do I turn off compatibility mode for iTunes?

Recently computer keeps on telling me to turn off compatibility mode.
I have tried looking at previous answers but cant find what the instructions tell me. I get as far as opening the itumes folder and then it says right click on the itune ort itunes .exe . I can see lots of files. when i click on the one that says itunes it actually opens up itunes and cant see one that says itunes.exe. thx.

I think I have found a way to do it.
Go to start button
Type into search programs and files
itunes
right click
the compatibility tab then appears and can be switched off.

I have windows 7 and I can't sign into ITunes. Message says to turn off compatibility mode to use. How and why do I need to do this?

I have Windows 7. I was previously using Windows 98 when I set up ITunes and developed a library of music and movies. When I try to log in I keep getting a message stating that am using an older version of Windows and that I need to turn off "compatability mode to use ITunes. Where and why do I need to do this?

Hi there skinguru,
You may find the information in the article below helpful.
iTunes for Windows: How to turn off Compatibility Mode
http://support.apple.com/kb/ts1489
-Griff W.

How do I turn 'off' compatibility mode in iTunes.

How do I turn off compatibility mode in iTunes.

Try the following document, only be sure that none of the boxes in the compatibility tab are checked (not just the compatibility mode box itself):
iTunes for Windows: How to turn off Compatibility Mode

How do I turn off conversation mode in text messaging.

How do I turn off conversation mode in text messaging. i want my messages in sequential order.
It is a galaxy s3

Hi Catchingup
I can answer this question for you.You can't change the stock messaging application to turn off the conversation mode. You may be able to download a 3rd party application for messaging that could assist you with this feature.
Thank you
JoeL_VZW
Please follow us on twitter @vzwsupport

Turning Off Compatibility Mode

Hello,
Every time that I open iTunes for my PC (Vista operating system), I receive a dialog box that states: "iTunes.exe has been set to run in compatibility mode fore an older version of Windows. For best results, turn off compatibility mode for iTunes before you open it."
I would like to know how to do the above, or make it so that this does not appear anymore. I have the latest version of iTunes as well, and this has not resolved the issue. Thanks.

http://support.apple.com/kb/TS1489
Web search engines such as Google are your friend.
Message was edited by: Dave Sawyer

Turn to active mode

Similar Messages

Maybe you are looking for