Turned iphone off cause it wasnt working , not stuck on circle loading screen and apple screen, they go back n forth tried rebooting didnt work

My iphone was acting up, so i turned it off and it got stuck on the black circle loading screen and apple screen, thhey go back and forth. tried rebooting it and it didnt work, goes to apple then back to circle loading screen. connect it to itunes reads it but wont sync it or restore it.

From http://support.apple.com/kb/TS3694#error3194:
Unable to contact the iOS software update server gs.apple.com
Error 1004, 1013, 1638, 3014, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
Install the latest version of iTunes.
Check security software. Ensure that communication to gs.apple.com is allowed. Follow this article for assistance with security software. iTunes for Windows: Troubleshooting security software issues.
Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. FollowiTunes: Advanced iTunes Store troubleshooting to edit the hosts file or revert to a default hosts file. See section "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information".
Try to restore from another known-good computer and network.
If the errors persist on another computer, the device may need service.

Similar Messages

  • My MacBook wont turn on. Please help! It's stuck on the loading screen and I have two papers to write

    My computer is acting up. It won't turn on. I've tried to reboot it several times now, it's stuck on the white loading screen with a loading circle. Please please help

    Try the procedures in this support article:
    http://support.apple.com/kb/ts2570
    Ciao.

  • The touch screen on my ipod touch is not working. meaning that i can not unlock my ipod or even turn it off. is there anything i could to to get the screen to work again?

    the touch screen on my ipod touch is not working. meaning that i can not unlock my ipod or even turn it off. is there anything i could to to get the screen to work again?

    Try # 2 and 3 in link below. If neither work, your screen digitizer might need to be replaced.
    Basic troubleshooting steps  
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101

  • My ipod touch is on but is not bright enough i try to turn it off but it wont work what should i do?

    my ipod touch is on but is not bright enough i try to turn it off but it wont work what should i do?

    Did you make sure that the brightness is turned up to max in Settings/Brightness?
    Is anything covering the brightness sensor?
    Brightness
    Screen brightness affects battery life. Dim the screen to extend the time before you need to recharge iPod touch, or use Auto-Brightness.
    Adjust the screen brightness: Go to Settings > Brightness and drag the slider.
    Set whether iPod touch adjusts screen brightness automatically
    Go to Settings > Brightness and turn Auto-Brightness on or off. If Auto-Brightness is on, iPod touch adjusts the screen brightness for current light conditions using the built-in ambient light sensor.
    page 103, ipod touch user guide 5
    See if you can fix it by resetting the device.
    To reset, hold the sleep and home button until the Apple logo comes back again.
    If this does not work, set it up as new device:
    How to back up your data and set up as a new device
    Message was edited by: Ingo2711

  • I'm trying to reset my iPhone 4S but I have no internet as my wifi has broken and I have no data left, I have tried connecting to a computer which did not work any help would be grateful thanks

    I'm trying to reset my iPhone 4S but I have no internet as my wifi has broken and I have no data left, I have tried connecting to a computer which did not work any help would be grateful thanks

    A reset has nothing to do with Internet access or data access.
    A reset is simply pressing and holding the home and power buttons until the white Apple logo appears.
    What are you really trying to do?

  • HT201210 When I updated to ios6 my phone is stuck on the loading screen. I've turned it off but nothing is working.

    When I updated to ios6 my phone is stuck on the loading screen. I've turned it off but nothing is working.

    Loading screen is that the Apple Logo?
    Try a hard reset, Press and hold the Power and Home buttons until you see the Apple Logo.
    If that doesn't work, force the phone into recovery mode and restore using iTunes:
    iOS: Unable to update or restore
    http://support.apple.com/kb/HT1808

  • My Ipod touch 4th generation is stuck on the loading screen from when i turned it on and it is not changing

    My Ipod touch 4th generation is stuck on the loading screen from when i turned it on and it is not changing plz help

    - Try resetting the iPod.
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Next connect the iPod to its syncing computer and restore the iPod via iTunes
    - If iTunes does not see the iPod try placing the iPod in recovery mode to see if it will make it visible so yu can restore the iPod.  For recovery modes see:
    iPhone and iPod touch: Unable to update or restore

  • I've been sent a scan of a document as an attachment. Clicking on it, I get the message, "Pixel aspect ration correction is for preview purposes only. Turn it off for maximum image quality." What is pixel aspect ration and how do I turn it off?

    I've been sent a scan of a document as an attachment. Clicking on it, I get the message, "Pixel aspect ration correction is for preview purposes only. Turn it off for maximum image quality." What is pixel aspect ration and how do I turn it off?

    It's "aspect ratio", not aspect "ration". 
    It's what determines whether you have square pixels ("normal") or, if rectangular pixels, what the aspect ratio (width : length)  of that rectangle is.
    It's explained in the Help files.  I cannot go into more detail because you have neglected to provide information about your platform and exact version of Photoshop.
    Example in next post

  • Iphone 3g shuts off after the apple loading screen then cuts back on

    Iphone 3g shuts off after the apple loading screen then cuts back on by its self but when i connect it to a charger it works fine also my on/off button is unresponsive (i havent dropped it or wet it so im confused why its doing this)

    Welcome to the discussions,
    normally you could try to reset the phone by holding the sleep and home button until the Apple logo comes back. But since the sleep button is unresponsive, try to restore "as new iPhone", if necessary without using the backup afterwards, in case the backup contains corrupt data.
    Restoring: http://support.apple.com/kb/HT1414

  • Airplay mirroring problem:when i change slide mirroring from off to on ,my new i pad lost wi fi connection and apple tv lost wifi connection:ihave last software for both.Can u help me?thanks

    when i change slide mirroring from off to on ,my new i pad lost wi fi connection and apple tv lost wifi connection:ihave last software for both.Can u help me?thanks.
    when i use i pad with apple tv for see my photo,youtube and movies all ok.

    I suspect that the problem is in your router. Do NOT consider your router to be blameless if some other devices seem to work with it.
    Try restarting your WiFi router by removing power for 30 seconds. Don't just turn it Off. On many routers that doesn't really do anything but put the router into standby mode. If that does not help check for a firmware update for your router. If none exists which corrects the problem consider replacing the router.
    There is a chance that some services turned on in your router could be causing problems. Look for a setting called QoS (Quality of Service). If ON turn it OFF.
    If you need more help please give the make, model, and version of your WiFi router and how you have it configured.
    See also here: http://www.apple.com/support/ipad/wifi/

  • When turn power on, stuck on original loading screen...

    Hey there,
    My laptop had frozen, so I held the power button until it turned itself off.
    I then turned the power back on. It began to load- I got to the grey screen with the apple logo and loading dial. However, it gets stuck on this screen indefintely. It will not budge from this particular screen! I can turn it off by holding the power button down, and then turn it back on, but the same screen comes up.
    I have tried removing the battery, putting it back in and turning the power on, but this doesn't work either.
    What shall I do? So far I have left the laptop on for an hour and it did not budge from the loading screen. Should I leave it on longer perhaps?
    Any suggestions would be much appreciated.
    Thanks,
    Chris

    Boot from your system CD, run Disk First Aid from your Disk Utility and repair your permissions.
    -Bmer
    Mac Owners Support Group
    Join Us @ MacOSG.com
    iTunes: MacOSG Podcast
     An Apple User Group 

  • My White Macbook is stuck at the loading screen, and disk utility, safe mode doesn't work either. What should I do?

    I went on vacation a few days ago and in El Salvador, they have this mobile broadband sticks. Well, I was using one until it gave me a network error. After that, it shut down my computer entirely. The first time it happened, I didn't think much of it. I took the battery out and put it back in for it could work. It happened another two times, and after the third time, my MacBook stays stuck at the loading screen, and it will take 5-10 minutes on that screen, before it shuts down, or it wouldn't turn on at all. I've tried booting into safe mode, but it appears to not boot into it. I've tried resetting the Pram, and using disk utility, but that still won't work. I don't know what else to do to make it boot into  OS X  Lion.
    I'm an AP student, and the majority of my work is in that computer, and it is very important! What can I do? Not only that, but I enter school in a few weeks and I need the AP work by the time I enter.
    What can I do? Can someone help?
    Thanks

    Reinstalling Lion Without the Installer
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alterhatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
    Reinstall Lion: Select Reinstall Lion and click on the Continue button.
    Note: You can also re-download the Lion installer by opening the App Store application. Hold down the OPTION key and click on the Purchases icon in the toolbar. You should now see an active Install button to the right of your Lion purchase entry. There are situations in which this will not work. For example, if you are already booted into the Lion you originally purchased with your Apple ID or if an instance of the Lion installer is located anywhere on your computer.

  • My macbook pro will not start up. stuck on grey loading screen and spinning dial. HELP

    my macbook pro will not start up. stuck on grey loading screen and spinning dial. i shut it down last night and now when i try to turn it on it will not get past this page. lights and sounds work but nothing happens. please help

    Power it down by holding the power button down. Then try to power it up again. Post back. It would help if we knew what OS you are running, the model MBP...

  • My iphone is stuck on the loading screen... Any help?

    My iphone is stuck on the loading screen... Any help?

    Try resetting by holding the home button and sleep/wake button until it turns off ignoring the slide to power down. You probably won't see that if yours is stuck.

  • I downloaded an update. itunes began to update my phone. stopped halfway due to an error. now my iphone screen is stuck at the loading screen for an update. (i.e. the apple logo, and the loading bar)

    i downloaded ios5. if i remember the screen correctly i was downloading the 5.1 update. in mid load, it hit an error. i don't remember the error code, but now my iphone is locked...well frozen at the update loading screen. PLEASE HELP!!!!!!!!

    Try Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...
    Also, if the Device has been Modified... this will Not necessarily work.

Maybe you are looking for

  • Corrupted SW Instruments?

    Hey Guys, I have a strange issue, that i have not been able to find an answer to either here or on the net. For some of the loops that i have installed on my machine, especially 'world music' software loops will play perfectly fine when they are prev

  • I found a solution to zen battery probl

    About 2 weeks ago I went to use my microphoto for the first time in two or three months and it turned out that the battery was drained and would not charge no matter what. I put the battery in the freezer for a few days and viola... back to normal. T

  • How do i put the result of a sum in a variable ?

    Hi All... I have two columns in my template, one is debit and another one is credit... I did a sum in debit column and a sum in the credit column... Now i need to subtract the sum of debit from the sum of credit, i was thinkin about put these results

  • Re: expdp restart doubt

    Hi Dean, Thanks for the detailed explanation. Saw this thread and I have a related query on using stop/resume a DP job Can I stop/resume a job non-interactively? Here is my use case. - I'm launching an expdp/impdp job through a perl script - There is

  • Just got one, can't get it to turn on!!! HELP!!

    Yes i've gone through all the steps on this website. When i opened up my nano it worked up until i started putting songs on it. somewhere in between i had 57 songs on it when it stopped adding songs. it just says do not disconnect, and when i try to