Turned off ALL startup programs with "select all" - Windows 8
I was trying to increase available memory and decrease the start up time on my Window 8 run Ideapad, by selecting "all" and "remove from startup". Now almost nothing comes up at start up (should I be surprised?!?!). I can log in, but do not have any other options on the screen to choose from (e.g., no menu bar, cntrl/alt/delete does not bring up a management panel).
Any suggestions for this foolish Win 8 newbie would be most appreciated.
Steve
...some more info on this situation.
The system boots relatively quickly to the "Welcome Screen" and after signing in it takes another 3 minutes for me to have a useable system - although that is not completely accurate. In the course of the 3 minute wait, I am able to start the Task Manager; and by use of the Lenovo "black button" I can get into the Control Panel. So it seems a large part of the wait time is spent being on hold until Windows Explorer is clear to start.
If I disable all non-Microsoft services via "msconfig", I get a very quick (at least, relatively) startup; however, I am unable to identify which of the non-MS services is giving me grief (or which ones, if there are more than one). Likewise, a boot in "Safe mode" also provides a fast start up.
Hopefully, some bright soul(s) - from Lenovo or MS or ??? - will come up with a solution to this predicament; altho', at this point, maybe not in time for Christmas!
Season Best
Similar Messages
-
Can I turn off the Ken Burns effect from all stills at once?
I am using iMovie 09. I am creating a slideshow. I want to turn off the Ken Burns effect from all stills. Is there a way to do this in one operation?
Mary LouYes. Select one still. Open the Rotate, Crop, Ken Burns Tool on the middle Toolbar. Set it to FIT (for letterboxing) or to CROP (for it to fill the screen, but cut off the top and bottom). This will turn off Ken Burns.
Now select the photo you just adjusted and EDIT/COPY (or Command-C).
Now click EDIT/SELECT ALL (or Command-A) to select all photos.
Finally, click EDIT/PASTE ADJUSTMENTS/CROP ADJUSTMENTS to apply to all photos. -
I added all my contacts and when i turned off and on my phone they all erased
i added all my contacts and when i turned off and on my ph they all erased. why?
Hi Laura-Ann V,
If you are having issues with Contacts and Calendars in iCloud, you may find the following article helpful:
iCloud: Troubleshooting iCloud Contacts
http://support.apple.com/kb/ts3998
iCloud: Troubleshooting iCloud Calendar
http://support.apple.com/kb/ts3999
Regards,
- Brenden -
I have an I pad1 which I have gone to turn off but it won't. All it has on the scream is the timer wheel and I now can't turn it in or off please help!
Connect the iPad to your computer and launch iTunes.
Click Restore on the Summary pane if iPad is visible in iTune -
Iphone was stolen. and find my iphone was turned off. How can I erase all data
Last night my iPhone was stolen. And find my iphone was turned off. How can i erase all data on my phone remotely?
You can't do anything if Find My Phone was not enabled.
What To Do If Your iDevice Is Lost Or Stolen
iPhone, iPod Touch, and iPad
If you activated Find My Phone before it was lost or stolen, you can track it only if it is connected to the Internet by Wi-Fi or cellular. What you cannot do is track your device using a serial number or other identifying number. You cannot expect Apple or anyone else to find your device for you. You cannot recover your loss unless you insure your device for such loss. It is not covered by your warranty.
If your iPhone, iPod, iPod Touch, or iPad is lost or stolen what do you do? There are things you should have done in advance - before you lost it or it was stolen - and some things to do after the fact. Here are some suggestions:
This link, Re: Help! I misplaced / lost my iPhone 5 today morning in delta Chelsea hotel downtown an I am not able to track it. Please help!, has some good advice regarding your options when your iDevice is lost or stolen.
1. Reporting a lost or stolen Apple product
2. Find my lost iPod Touch
3. AT&T. Sprint, and Verizon can block stolen phones/tablets
4. What-To-Do-When-Iphone-Is-Stolen
5. iCloud- Use Lost Mode
6. What to do if your iOS device is lost or stolen
7. 6 Ways to Track and Recover Your Lost/Stolen iPhone
8. Find My iPhone
9. Report Stolen iPad | Stolen Lost Found Online
It pays to be proactive by following the advice on using Find My Phone before you lose your device:
1. Find My iPhone
2. Setup your iDevice on iCloud
3. OS X Lion/Mountain Lion- About Find My Mac
4. How To Set Up Free Find Your iPhone (Even on Unsupported Devices) -
I recently turned off iCloud photo sharing and lost all the photos off my iPhone 4S. How can I get them back onto my phone?
IF you have successfully imported your pictures to your Mac http://support.apple.com/kb/HT4083 then it's safe to delete it from your phone.
If you want the pics back on your phone, just sync them back using itunes http://support.apple.com/kb/HT4236 -
Ipad mini, after ios7 upgrade if turn off the mobile data, my carrier gets turned off and wifi doesnt work at all. Its slow and app store crashes everytime. Help me to gowngrade to ios6. This really *****.
Tap Settings > General > Reset > Reset All Settings
Then restart your iPad.
Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, then swipe the slider to power off.
Then press and hold the Sleep/Wake button until the Apple logo appears.
Downgrading is not an option for an iOS device. -
How do I turn off "your recent download with your apple id" emails? Annoyingly often and they fill up my inbox. Is there a way to unsubscribe from these?
It is in Settings>iTunes & App Stores to change automatic downloads. But it isn't your device that needs to be changed if you are the one that made the download. He needs to turn off the setting for automatic downloads on his phone. I'm guessing here, but you are all sharing the same Apple ID?
-
How do i turn off the startup sound on macbook pro?
how do i turn off the startup sound on macbook pro?
You don't. You may find some third-party software that will, however. Try Auto Mute.
Alternatively, you can try this:
I think this is the best and simplest solution. Open a Terminal window and type (or copy/paste) the following to turn down the startup noise:
sudo nvram SystemAudioVolume="%00"
Press RETURN.
And to restore it to the original value type:
sudo nvram -d SystemAudioVolume
Press RETURN.
That's all folks. -
have a question I do not use mail in my computer I use yahoo and I have all these emails and selected all and then delete then delete trash and they always come back how do I stop these old email in apple mail? I never send anything from there but I have the same email in yahoo but delete them and they still show up in apple mail from day one how do I get rid of these once and for all.Please help
<Edited by Host>I am soooooooooooo confused now. Ok, if you are having problems with Yahoo Mail and Gmail but you do not use Apple's Mail you need to do the following:
1 - Post in Yahoo's Mail forums and/or contact their tech support.
2 - Post in Gmails forums and/or contact their tech support.
Neither of the above are Apple's products. -
Turning off a remote PC with LV
HI,
I want to know if anyone knows if it is possible to turn off a remote PC with a LV program. We have one PC supervision that stays always on and 2 other PCs that are on the same network. The other PCs do not have KVM and we need to turn them off once in a while within our application. Right now when we want to turn them off we have to remote desktop and turn them off, not possible when the application is running.
Thanksyou can use the computer name in the shutdown command
C:\>shutdown
Usage: shutdown [-i | -l | -s | -r | -a] [-f] [-m \\computername] [-t xx] [-c "c
omment"] [-d up:xx:yy]
No args Display this message (same as -?)
-i Display GUI interface, must be the first option
-l Log off (cannot be used with -m option)
-s Shutdown the computer
-r Shutdown and restart the computer
-a Abort a system shutdown
-m \\computername Remote computer to shutdown/restart/abort
-t xx Set timeout for shutdown to xx seconds
-c "comment" Shutdown comment (maximum of 127 characters)
-f Forces running applications to close without warning
-d [u][p]:xx:yy The reason code for the shutdown
u is the user code
p is a planned shutdown code
xx is the major reason code (positive integer less than 256)
yy is the minor reason code (positive integer less than 65536)
- James
Using LV 2012 on Windows 7 64 bit -
Submit program with selection screen parameters - getting blank values
Hi, I'm submitting a program with selection screen parameters. when I pass '000' (I_TPLSCN )value for Planning Scenario and when this goes to selection screen then I don't see value for Planning scenario as '000'(I_TPLSCN ) but the value is blank in selection screen. I'm using the below code for this.
SUBMIT RMCPAMRP WITH MATNR_GL EQ I_MATNR SIGN 'I'
WITH WERKS_GL EQ I_WERKS SIGN 'I'
WITH PLSCN EQ I_TPLSCN SIGN 'I'
via selection-screen AND RETURN.
Could anyone please help me how to display value '000' rather than blanks.
thanks in advance.If I_MATNR, I_TPLSCN and I_WERKS are variable then try with
SUBMIT rmcpamrp
WITH matnr_gl = i_matnr
WITH plscn = i_tplscn
WITH werks_gl = i_werks
via selection-screen
AND RETURN .
If I_MATNR, I_TPLSCN and I_WERKS are of type range then try with
SUBMIT rmcpamrp
WITH matnr_gl IN i_matnr
WITH plscn IN i_tplscn
WITH werks_gl IN i_werks
via selection-screen
AND RETURN
Edited by: Pawan Kesari on Dec 24, 2009 3:33 PM -
Ever time I want to send a link in Fire fox it transfer to by itself to Microsoft outlook. How do I turn off Microsoft outlook program. I tried numerous of time to set default to fire fox
Hi
Please find the links given below to call HP technical support.
If you live in the US, contact HP Here.
If you are in another part of the world, start Here.
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath -
Turning off the startup chime?
Anyone knows how to turn off the startup chime? It's a bit embarassing if I start my Mac during classes...
You're welcome anytime.
Please do keep in mind that the startup sound isn't just there to 'annoy'
It's more vital reason for excistence is to inform you when there are problems during startup, like bad RAM or the like.
So once in a while or when not at school, you should enable it again, just to make sure everythings still ok.
Have Fun and thanks for the star.
Stefan -
Why does Mobile Data notification keep coming up saying 'Mobile Data is turned off for "Numbers" and I have to click on OK to get rid of it? I KNOW it's turned off for that program because that is what I want it to be set at. What I DON'T want is to have to click on OK EVERY TIME I open the program when I'm away from wifi.
That is how it works in general, not just for Numbers. It irritates me on other apps at times, although I can see an argument that if it didn't do that then people would complain about missing functionality after they forgot they had turned data off for an app. At any rate, this is a user to user support forum and we can't do anything about it. If you want to make a suggestion to Apple, following is a place to do that: http://www.apple.com/feedback/
Maybe you are looking for
-
I purchased photoshop elements and i am having all the problems in the world installing it.... first the link in the emails were errors and secondly i have downloaded and installed multiple times and it says my serial number from the email i received
-
I have Robohelp 9 and Camtasia Studio 8. I created a short (1 min) video with sound and want to add it to my Robohelp Webhelp project. A click on a link in the topic should open up a separate page and play the video . It doesn't work. What I have a
-
Correlating VPN assigned IP address with particular users - CSACS and ASA
We have an ASA running 7.0(6)8 and use CSACS v4.1 For remote access, we have VPN groups set-up on the ASA. Our remote users connect to our network, are authenticated via the CSACS server, then are assigned an IP address from the relevant address pool
-
Hello Experts, I want to integrate BIPublisher with UCM,So please help me out here. Thanks,
-
What is the flow of Oracle Manufacturing
Hi, what is the flow of oracle manufacturing . If any one know pls help me.