Turned off power strip to DVR Box and Wireless Router...now I don't have internet connection..

I went away this past weekend and turned off the power strip that my DVR box and wireless router are plugged into. When I got home early this morning I powered them back on and I did not have an internet connection anywhere in my home. I restarted the router twice and still no connection. My computer says that connection to my wireless is "very good" but I get notice that computer "cannot display webpage" or "invalid web address". I left for work and have not tried anything else to remedy this issue. Ideas anyone?

Is your TV Service and Phone service if you have it working as it should? What does the router indicate as far as status lights go?
========
The first to bring me 1Gbps Fiber for $30/m wins!

Similar Messages

I have an older version of Adobe Photoshop Lightroom and having trouble activating because I do not have internet connection

I have an older version of Adobe Photoshop Lightroom. I have the disk and the serial number but I cannot activate because I do not have Internet. How can I activate this product?

"Photoshop" Lightroom doesn't require activation; you just install and then type in the serial number when prompted, and it should work from thet moment; Adobe allow you to install Lr on two computers at the same time. The Internet is only really required to register your serial number, which is a very good idea in case of disaster.

I am running an AD Forest and when I don't have Internet connection on the entire network, some computers cannot log in on the domain

Hello!
I run an AD Forest and when my Internet connection is not working, some of my PCs cannot sign in on the domain, while the majority can do this without any problems.
Could you please help,
Thanks,
Radu

Hi,
Usually, we have an edge device for internet connection and LAN connection, like a router. So I suppose gateway is not working properly.
For further troubleshooting, please provide your network topology. DNS, gateway settings. Test if you can ping DC when the issue occur.

MBA connected to iPhone4 Personal Hotspot, but safari and other apps don't have internet connect

My new MBA is connected to my iPhone4 (show 1 connection), but when using Safari and other Apps, it always time out or display error message "no internet connect". Please assist. Thank you.

Do you have a program such as "Little Snitch" installed? If so, are its settings allowing the applications to connect?

Not receiving texts from iPhone contacts when I'm not connected to wifi or cell data. I can't send and receive regular SMS texts with non iMessage users but iMessage users message are not being converted to text when I don't have internet connect

I can send and receive to any non iPhone user. I can send a message as a text to an iPhone user but if I'm not connected to cellular data or wifi I do not receive messages from iPhone contacts. From what I understand these message should automatically send to me as texts instead of iMessages but since the update it's not functioning properly. Please help. I've tried turning iMessage off and I still don't receive the messages until after I reconnect to wifi.

I have the same problem! Before the upgrade, if I wasn't connected to the internet, any messages sent to me from an iphone would convert automatically to a text message. I have payg tarriff, so I turn cell data off, as it costs too much to use it. I have wifi at home and work, but if I'm out and about, I don't receive texts from iphone users until I'm on wifi. I get them ok from non iphone users. There was never any problem until ios7

2010 ATV and Wireless Router Combinations that Work/Don't Work

I am interested in seeing what configurations seem to work out there (as I am considering replacing my router but am worried that I will still have issues).
Here goes
Symptom: Drops wireless connection/loss of wireless settings
Config: 2010 ATV (x2), Linksys WRT160N, iMac 2009, latest iTunes

Had the same issue with my new Netgear WNDR3700. Seems like my ATV or the Netgear would go to sleep and then I would have to wait over half a minute for the ATV to reconnect and sometimes it would lose the connection password or would not reconnect to the ATV or other devices unless I power cycled the router.
I've since switched to the new Airport Extreme Base Station and everything is working perfectly (so far) including my new ATV2. Connection stays live or at least reconnects instantly when the ATV2 wakes up and the AEBS even wakes up my Lexmark wireless printer for print jobs which the old router wouldn't do. Cheers!
P.S. The AEBS does not have a browser accessible interface and you have to use the airport tools included on your iMac to set it up. Hasn't been an issue so far. Anything this router lacks is easily offset by the fact that it just works which is a nice change from my previous routers. I also keep all my high speed N stuff including ATV and ATV2 locked on the 5ghz radio and let the slower stuff share the 2.4ghz radio. AEBS is simultaneous dual band. Rename the SSID's to different I.D.'s and then you can force your device to connect to one radio or the other.
James

When I started my Mac the screen was white with the Apple logo and power motion icon running. I attempted to turn off Mac then a message stating "Debugger called: Button SCI . Also "Waiting for remote debugger connection." What is my next step?

When I started my Mac the screen was white with the Apple logo and power motion icon running. I attempted to turn off Mac then a message stating "Debugger called: <Button SCI>. Also "Waiting for remote debugger connection." What is my next step?

Hi , and a warm welcome to the forums!
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
If 10.7.0 or later...
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.
And sorry to report that OSX is more Widows like than ever, but….
If that doesn't help Reinstall the OS.

How do I TURN OFF power management???

My computer still keeps going to sleep and the only way to wake it up is to hit the reset button. I tried enabling the keyboard-wake-up to wake it up, but then it started rebooting itself spontaneously every 15 minutes -- without any warning from Windows. It doesn't matter whether I select S1/POS or S3/STR mode -- it does the same thing every time. I don't want S1 or S3 power management. I want to TURN OFF POWER MANAGEMENT COMPLETELY! I only want Windows to turn off the monitor. The BIOS should do nothing!
How do I accomplish this??????????
BIOS v1.3
NEO2-LS
Quickboot - disabled
IDE Busmaster - disabled
ATA mode - native
ATA config - P-ATA only
Performance mode - slow
dynamic overclocking - disabled
S.M.A.R.T. for hd enabled
Power Supply - @Power EP43057 (430W)
HD Western Digital UATA WD800JB
video card - MSI FX5600TD128
512MB Elixir 400 MHz DDR Ram
Lite-On DVDROM
Pentium 4 2.6GHz HT 800MHz

Quote
My computer still keeps going to sleep and the only way to wake it up is to hit the reset button
This is strange - my understanding is you would usually use the Power button to wake the suspended PC...
Could what you are experiencing be more of a shutdown or instability?
Is it due to BIOS setting or Windows? Here are some possibilities
1. What is your selected Power Scheme? Are your options for Turn off hard disks, System standby & System hibernates set to Never?
2. These BIOS settings work fine for me ...
ACPI Standby State : Auto
Power Management/APM : Enabled
Suspend Time Out : Disabled
Set Monitor Events
FDC/LPT/COM Ports : Monitor
Primary Master IDE : Monitor
Primary Slave IDE : Ignore
Secondary Master IDE : Ignore
Secondary Slave IDE : Ignore
Set WakeUp Events
Resume on PME : Disabled
Resume on RTC Alarm : Disabled
Keyboard PowerOn Function : Disabled
Mouse PowerOn Function : Disabled
3. Does your keyboard have any of those quick buttons for Power / Sleep / Wake ? Could any of them be stuck? (Mine has these in a most inconvenient place - between Delete/End/PgDn and arrow keys, so I sometimes accidentally pressed them)

While doing the most recent firmware upgrade, my iMac hung on the spinning ball. The instructions said "not" to turn off power during the process, so I don't know what to do. The ball is still spinning.

While doing the most recent firmware upgrade, my new iMac hung on the spinning ball. The instructions said "not" to turn off power during the process, so I don't know what to do. The ball is still spinning.

If you tried resetting the ipod and it still keeps having the same issue you described, try setting the ipod to disk mode.
Here is an article from the apple support website on setting the ipod to disk mode.
http://docs.info.apple.com/article.html?artnum=93651
If you can get the ipod into disk mode, connect it to the computer and rrestore the ipod using itunes.
if the ipod will not go into disk mode, you can return the ipod or set the ipod up for service via the apple ipod service depot.
http://depot.info.apple.com/ipod

C5550 printer gives error message "Turn off power, then on again" with all flashing lights

This printer all of the sudden in constanty jamming up and gives error message "Turn off power, then on again", makes a lot of noise, and does it again. Can't get any printing done! I'm about to throw it out the window. Any suggestions?

Hey,
I have been looking around trying to find the error that is associated with the blue blinking light above the memory card slots on the lower, right-hand side of the front of the printer. I have found that it is called the photo light; but, in regards to the flashing of it, I can't seem to find what that means.
I recommend removing all memory cards from the slots, unplugging the power and leaving the printer unplugged for a while. Hopefully when you plug it all back in, everything will be ok. If not, let me know. In the meantime I'll keep looking and when I hear back from you I'll hopefully have some more information for you.
Thanks for your detailed reply, have a great day, Look forward to hearing back from you.
I worked for HP.

My lock button isn't working and I completely forgot that, I turned off my phone to restart it and now I cant turn it back on, Any suggestions?

My lock button isn't working and I completely forgot that, I turned off my phone to restart it and now I cant turn it back on, Any suggestions?

You need to get the on/off button repaired.
You can try connecting the iPhone to a power source which should power the iPhone on.

Slide bar to turn off power...

When I first set up my Ipad, there was a slide bar to turn off power. Since I have charged my Ipad the slide bar to turn off power is no longer there. Is this normal after you set up the Ipad?

Press and hold the button at the top of the iPad until the slide to power off is displayed.

I messed up migrating from old iMac to my shiny new one. I didn't turn off power saver. How do I start again, it's all gone wrong, help

I messed up migrating from old iMac to my shiny new one. I didn't turn off power saver. How do I start again, it's all gone wrong, help

Boot into recovery mode, launch Disk Utility and wipe the HD. Quit DU and restore the OS. On first boot, migrate properly, using the steps in Pondini's Setup New Mac guide.

If I turn off iMessages on my iphone 5 and only use SMS, I am hoping this will this stop ALL my messages going to partners ipad? I only want 2 use SMS and not have any of my messages go to partners ipad so dont want to alter ipad settings.

My situtation is this, my soon to be ex previously set up an ipad with both our numbers and we share a linked itunes/icloud account so if my phone is off he gets all my messages via his ipad that I DO NOT have access to his ipad at ALL. I can't set up my own itunes account (not yet until I leave him) otherwise he will know I am leaving him and it will cause major problems. So I was hoping that if I turn off iMessages on my iphone 5 and just talk to my family via SMS and NOT touch his precious ipad mini, that he wont be able to get my messages anymore and if I turn off iCloud storage and back up as well on my iphone only. Is this correct? Its just a temporary solution I am hoping. I have searched for days and hours and I just cant find this answer anywhere....
Do I HAVE to turn off my phone number off or delete it on his ipad? I am really hoping I can just do this at my own end and not touch his ipad in anyway or have to change my itunes id YET. Once I leave him shortly, I will create a whole new ID etc. I just wanna know if I can do this myself on my iphone only. Please any experienced help would be greatly appreciated. Thank you so very much.

mazwig wrote:
I just want to know if I turn off iMessages and iCloud Back up, and ONLY use SMS myself and my family just SMS's me - and do this on my PHONE ONLY and not touch his ipad (so he doesn't know), if he will get any of my messages I send or receive on his ipad please. Its just a temp thing and I just want to take action myself on my own phone and want to know if this will work. Does anyone know?
SMS messages will not go to the iPad Mini. It's not capable of receving them. If you have access and can do it without it causing a problem, remove your iPhone from the Apple ID Support profile:
Go to: https://supportprofile.apple.com/MySupportProfile.do
Log in if not already logged in.
Click on "Edit Products"
Click on the "X" to the right of the product.
Click "Unregister"
If anyone in your family uses iMessage, they will go to both you and your boyfriend unless you do that.
To be completely safe, you may want to simply use an alternate message app such as Skype, Viber, Whatsapp (assuming everyone has a smartphone) until the issue is resolved. Google Voice will also allow you to send and receive texts to another number on your phone.
Best of luck.

Hi guys well huge issue my Ipod 4th generation shuffle died and I tried to chrge it I plugged it into the USB port and the red light came on and after 5 seconds turned off the whole Ipod is dead and I've tried in wall chargers as well that doesn't charge

Hi guys well huge issue my Ipod 4th generation shuffle died and I tried to chrge it I plugged it into the USB port and the red light came on and after 5seconds turned off the whole Ipod is dead and I've tried in wall chargers as well that doesn't charge what should I do is there a solution or should I claim my warrenty and have it fixed??

Also my Itunes and computer won'r reconize it

Turned off power strip to DVR Box and Wireless Router...n​ow I don't have internet connection​..

Similar Messages

Maybe you are looking for

Turned off power strip to DVR Box and Wireless Router...now I don't have internet connection..