Turned on mbp 2012 and sound icon is gray

i have rebooted and fixed it but everyother time it comes back

Welcome to the Apple Support Communities
First, open System Preferences > Sound > Output, and choose "Internal Speakers".
If you don't see that option or if it's greyed, reset the PRAM > http://support.apple.com/kb/HT1379?viewlocale=en_US&locale=en_US This will reset speaker settings. Then, after starting, the speaker should be working. If not, open System Preferences > Sound > Output, and choose "Internal Speakers".
If nothing works, I recommend you to take the computer to an Apple Store so they can check if there's a hardware problem

Similar Messages

  • TS1382 my ipod got wet and allow time to dry, I turn now the musics and sound and everything but the screen is blank and nothing is visible. a solution please urgent.

    my ipod got wet and allow time to dry, I turn now the musics and sound and everything but the screen is blank and nothing is visible. a solution please urgent.

    See my reply to your other post

  • I recently bought 13" mbp 2012 and I noticed that I only got 2HRS max and the only thing Im doing is watch movies on VLC and surf the net. How long does you mbp battery last?

    I recently bought 13" mbp 2012 and I noticed that I only got 2HRS max and the only thing Im doing is watch movies on VLC and surf the net. How long does you mbp battery last?

    That listed 7 hours is with very limited use. Low screen brightness, low keyboard backlight, No WiFi or bluetooth.
    Most I have ever gotten from my 15" 2011 model is around 5-6 hours and that was with very light use. Just Web, Chrome, and email, thunderbird, and Wifi.

  • No audio. sound icon suddenly grayed out

    A week or so after installing the Yosemite update, my macbook air went totally silent. The sound icon grayed out and the sound buttons show up a cross sign and there is basically no sound. Went to sound preferences and there is nothing in the output and input sections and the mute box is ticked and grey(can't be changed). What to do? this is ridiculous!

    If there's a red light visible in the headphone socket, it indicates that the leaf switch is stuck. The leaf is pushed aside by the headphone jack as it's inserted and cuts off sound to the internal speakers.
    Try inserting and removing the headphone plug a few (dozen) times.
    If that doesn't work, you can attempt to tease the switch back with a non-conducting probe (plastic toothpick or similar).
    And be careful; the leaf is fragile and it's an expensive bit to get to and replace, in fact on some models it's directly on the logic board.
    Not sure how true it is, but at least one correspondent claims to have fixed it by cleaning the red laser with a Q-tip, on the theory that dirt on the end may fool the system into thinking a jack is inserted. Not convinced myself, but no harm trying it if you can't sort it the other way.

  • Screen turns alot of colors and sound contiues

    I will be watching a video or coming back on after sleep and the screen will turn a bunch of colors. Some times the sound continues as normal, but other times a loud screeching noise starts. It has been happening for a couple of months. Its not very often just here and there. In the past when I had a PC and something like this happens it was the graphics card. It happened when I was running snow leopard and now I did a clean install of Lion it has happened for the first time last night. I have only had the 27inch mac for 5 or so months. Any advice?

    The Basic Troubleshooting Steps are:
    Restart... Reset... Restore from Backup...  Restore as New...
    However...
    In your caes (having dropped the iDevice) it looks like a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is required... Be sure to make an appointment first...

  • I seem to have lost my account and sound icons cant locate them nor add an account i need help ..1 more thing i still have my system preference app but nothing? any help?

    guys im really trying to edit my audio settings and i would like to create a user account for my girlfriend ..
    pls help

    I have a late 2007 17" MBP, so I am familiar with your model. I might also add that my original Fujitsu hard drive started to go south right after my Applecare expired, so if you still have the original drive, it could possibly be on its way out. To get a more comprehensive check of the physical health of your hard drive, you might want to download and run SMART Utility:
    http://www.volitans-software.com/smart_utility.php
    You can download the demo and run it several times for free.
    Also, how full is your hard drive? If less than 10% free space, it is too full. 15%-20% free space is better.
    You might try a Safe Boot:
    http://support.apple.com/kb/ht1455
    Safe Boot disables quite a few things, one of which is start up items. If things seem OK in Safe Mode, you could probably go ahead and add a new account for troubleshooting. If the new account has no problems, then you have something wrong in your usual user account.
    You can also look at what safe Mode disables to get a clue as to what might be causing your problems.
    Good luck!

  • Modem and ethernet icons always there

    Dear Common Wisdom:
    I connot find the botton to turn off the modem and ethernet icons that are taking up precious real estate in my top menu bar.
    Can anyone help me turn them off?
    Thanks!
    cj

    Should be that easy, but not so, Joe.
    When I do that the Wi-fi status disappears, but the modem and ethernet icons don't!!!
    Anyway, I do want the wi-fi status. That is helpful.
    Any other ideas?

  • TS3274 My sound is off. When looking at settings, the sound icon is red? How do I restore my sounds?

    My sound is off and sound icon is red. How do I reset my sounds? Everything I tried in sounds or general do not seem to work.

    Try This...
    Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
    Reset  ( No Data will be Lost )
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
    Wait for the Apple logo to Appear...
    Usually takes about 15 - 20 Seconds... ( But can take Longer...)
    Release the Buttons...

  • My sound icon keeps appearing on screen and turning itself up

    My sound icon keeps appearing on screen and turning itself up

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up           
    - Restore to factory settings/new iOS device.
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar          

  • HT2341 why does my sound icon grey out and doesn't allow me to make changes on the system settings

    why does my sound icon grey out and doesn't allow me to make changes on the system settings

    When you go to System Preferences > Sound what does it say for Output? Have you had headphones plugged in? Sometimes the headphone jack gets stuck thinking it has something plugged in when there isn't anaything there. SMC also has something to do with Sound:
    SMC RESET
    http://support.apple.com/kb/HT3964
    Shut down the computer.
    Unplug the computer's power cord and ALL peripherals.
    Wait 15 seconds.
    Attach the computers power cable.
    Wait another 5 seconds and press the power button to turn on the computer.
    The 5 second timing is important to a successful reset.

  • My sound from Internal Speakers stop working and the icon get grey

    Hello,
    Yesterday I use my headphones to listen music from my mac. Today after I turn on my notebook I saw that my sound icon is grey and when I try to change the level of the sound nothing happens. When I put again my headphones the sound works.
    I also saw that I have no option to choose Internal Speakers in Sound menu.
    Can you help me pls.

    I got the solution !
    The problem was at the Headphone's port. I reconnected my headphones several times till the problem disappeared. There was some red light inside the port.

  • Hey, for some reason i turned on my macbook pro 2012 and it says i have no internet access. I then found out that it also says that my self assigned ip address will not connect to the internet. How is this and how can i fix it?

    hey, for some reason i turned on my macbook pro 2012 and it says i have no internet access. I then found out that it also says that my self assigned ip address will not connect to the internet. How is this and how can i fix it?

    Reset your modem.

  • I just got ipad mini and did all the settings necessary, went to turn on today and apple icon comes on but then itunes icon comes up with a long looking lock, I can't get past it to open ipad

    I just got an ipad mini and didf all the settings necessary.  Went to turn on ipad this morning and apple icon shows then itunes icon and a long looking lock.  I cannot get on ipad. Not sure how to get it opened and operational?

    Where did you get the iPad?  Did you buy this from Apple or an Authorized Retailer?  or did you buy this from a friend, off eBay, from "some guy", etc.?

  • HT201412 All sounds are mute tho mute is not on. Keystroke sounds and other phone sounds but they ring tones and notifications are still working period I have tried turning the phone off and on please help

    All the keystrokes sounds in different sounds that go with the phone have stopped working do you know how to make them go again? The ring tones and notifications down this still work but not that keystrokes are other in phone sounds. Is there something I can do other than turn the phone off and on to restore them?

    Basic troubleshooting steps clearly outlined in the User Guide are restart, reset, restore from backup, restore as NEW.
    If the basic troubleshooting steps don't work, then you'll need to bring your phone into Apple for evaluation and probable replacement.

  • When I connect my iphone and open itunes the iphone icon shows up but when I click it nothing happens and the icon disappears.  I have uninstalled and re-installed itunes.  Turned my computer off, and turned my iphone off.  Restarted everything.

    When I connect my iphone and open itunes the iphone icon shows up but when I click it nothing happens and the icon disappears.  I have uninstalled and re-installed itunes.  Turned my computer off, and turned my iphone off.  Restarted everything.  Synced my iphone and my itunes and nothing seems to work.  Any suggestions?  I am using Windows

    Stop clicking the eject button.

Maybe you are looking for

  • ATI Mobility vs. Regular

    I was wondering what the difference between the ATI Mobility Radeon x1600 (found in Macbook Pros) and the ATI Radeon x1600 is. Are they about the same speed and the same power as each other? Or is the Mobility version less powerful than the other gra

  • Report server version details

    hi how to know the report server version details?? regards

  • How to Design ProcessChain in Development Environment.

    Hello Every One, I have a requiremet like this:  I have Two DSO1 and DSO2, these two DSO'S ARE CONNECTED TO CUBE. IF ANY ONE KNOWS PLEASE HELPME, WITH NAVIGATION STEPS WITH EXAMPLE. Regards, ch

  • Weblogic.jar?

    Hi there, How does my client development PC get access to WebLogic server weblogic.jar in order to compile application for weblogic? My weblogic server is in a Sun Solaris box while the development client is in a Windows PC across the network. Many t

  • Oracle Server -Linux Client

    Hi friends, i am Oracle developer, im very new to Linux server concepts, im in position use 'oracle' in linux client machine and i have to run PLSQL procedure scripts in that PUTTY. what all the Pre-requesties and how do i make tnsnames connection in