Turning ARCHIVELOG on & off with Instance in Status OPEN

I came to know the new feature in 11gR2 Turning Flashback Database on & off with Instance in Status OPEN
( Uwe Hesse blog)
for archivelog , why its not possible? why we are changing archivelog mode in mount stage?
is it possible in future releases to change archivelog mode in open status?

That enhancement is added from 11.2 only for the flashback mode. I am not sure that it would happen in next version(s) or not but I guess, the answer of why is somewhat not possible. In 11g, the option to put the entire db into the backup mode is also added at the open stage, again something which was not there before.
SQL> alter database begin backup;
Database altered.
SQL> alter database end backup;
Database altered.
SQL> select status from V$instance;
STATUS
OPENWhy? Again, can't be answered.
May be in the future it will but that we would come to know only in future.
Just my 2 cents.
Aman....

Similar Messages

  • HT4528 I have lost all of the contacts on my iPhone 4s. I have tried to turn them on/off with no luck.

    I have lost all of the contacts on my iPhone 4s. I have tried to turn them on/off with no luck.

    There is No Pre-installed Youtube App in iOS 6.
    http://itunes.apple.com/app/youtube/id544007664?mt=8

  • Restore settings on iPhone 3G now it's turning on and off with only apple logo, please help me what do I do?

    Restore settings on iPhone 3G now it's turning on and off with only apple logo, please help me what do I do?

    Anybody there

  • Is there a way to turn bluetooth on/off with one click

    I'd like to be able to turn bluetooth on and off directly from my home screen, instead of going thorugh settings>general>bluetooth>on/ff>pair device procudure. Is there a way to do that? If not, apple should definitely add it to iOS5, because bluetooth is such a battery, it would be nice to turn it off with one-click.

    SFTifoso wrote:
    Is there a way to do that?
    Currently, no.
    If not, apple should definitely add it to iOS5
    Tell Apple:
    http://www.apple.com/feedback/iphone.html

  • My apps wont open, i already tried turning the power off but still they wont open :(

    I really dont know what happened that all of my apps just wont open. I tried turning the power off but they were still crashing. Help please!!

    Try to reset the device by holding the sleep and home button for about 10sec, until the Apple logo comes back again.
    If this does not help, set it up as new device: How to back up your data and set up as a new device

  • HT1414 my ipad air is frozen with the i tunes logo and a black screen it does not turn on or off with the red bar

    my i pad air is frozen because it has a black screen with just the I tunes icon but you can't turn it on or off or do anything please can you help

    I'm sorry. I missed your response earlier today.
    You will need to use recovery mode. You can start iTunes on your computer first. Then you plug the cable into the computer, hold down the home button on the iPad and plug the cable into the iPad.
    Use recovery mode
    Recovery mode erases your device and restores it, which should resolve the issue. If you previously synced with iTunes or iCloud, you may be able to restore from your backup after recovery.
    Turn off your device. If you can't turn it off, press and hold the Sleep/Wake and Home buttons at the same time and wait a few seconds for it to turn off.
    Plug the device's USB cable into your computer only.
    Hold down the device's Home button as you connect the USB cable to it.
    When you see the Connect to iTunes screen, release the Home button. If you don't see this screen, try steps 1 through 3 one more time.
    iTunes should open and display a message such as: "iTunes has detected an iPhone in recovery mode. You must restore this iPhone before it can be used with iTunes."
    Use iTunes to restore your device.

  • My ipod is turning on and off with  the hold button

    Yesterday, my ipod ran out of batteries. I tried to turn it on to charge via a USB cable. It now turns of when the hold button goes into the hold position. Therefore I can't move the wheel. The batteries have been fully charged. Help?

    "It now turns of when the hold button goes into the hold position. Therefore I can't move the wheel."
    That's the whole idea of the hold button. It disables the iPod controls so you won't be able to use the clickwheel.

  • How to Set Automatic to turn on and off at specified time my TV with STB

    It seems very frustrating talking with Verizon tech support, that's why I turn to you guys to find if anyone knows the answer to my question above.,from my experience calling verizon for my tech support regarding fiosTV and most of my experience from Verizon are either inept and giving the customer the run around by keeping you on hold for the longest and not having the answer after all the time I spend with the tech on the phone or they will tell you that the that there is no such thing; and when you call again when you get another tech on the phone you get completely different answer if not an inept answer. 
    My Specific question is, if  I turned off my STB (top box) and my TV at a particular time; and I like my TV with STB to turn on at a specified time ( example I turned off my STB and TV at 9:00 PM ) and would like my TV with the STB to be turn on like 11:00 PM to turn off at 12:00 midnight by itself, not to record  but just to turn on as reminder and to serve as power saver incase I fall asleep ( this is just example scenario). How would I do that? The manual of either remote control or the STB does not provide that information. My television manual say the TV can but I can not turn it on automatically with the STB connected.
    I called Verizon tech, he first sounded inept and sounded like he just talking from a scripted lines, and would not tell me straight forward that he does not know the answer; I  explained that I switched to Verizon Fios for its claim in high and advance technology as they compare themselves by far higher in technology as compared with Cable or direct TV, and with Cable Vision I was able to used the above automatic turn on and off with the remote; I asked for his supervisor or maybe more expert tech support, He turned over the call to his supervisor, who told me that the STB or the remote Fios TV does not have that level of capability which sounded to me like a joke, he also told me that the STB can not be turn on and off because STB is always set as on; I told him I can see the green light turns on and off on the STB each time I press the ON button on the Verizon Remote; he defended that its always on because the timer is ON, and he told me instead FIOSTV has another feature that although it will not turn the feature on and off automatically, it will serve as reminder, I asked him How to carry out that function, the tech supervisor said  to me to just press the record button on my remote, which I know right away that it will just record, and  I told him that its not what I want to accomplish, this Tech Supervisor insisted that it will not record but will set to notify me, but surely it did record and it just wasted and used my DVR memory capacity the time when he put me on hold for a long period of time, I knew it recorded because the red button on the STB/TVR was on., and it did not notify me in anyway what time the TV and STB will turn on. That was a complete  waste of time, instead of him getting the issue to higher level of their tech support and try to research thru and get back to the client. To me, simple feature as this, is such absurd to claim that fiosTV has more advance features than others, where infact they can not even have their tech support answer such simple question.  
    Any one here has any idea, please help.

    The set top box does not offer any auto on or auto off feature. 
    you can only do that if your TV offers the feature. 
    If neither your TV nor the STB offer that feature (in this case the stb does not offer) then you can go to a radio shack or a similiar store and purchase a AC timer.  they make them and you plug them into your wall, they are very cheap.
    I have had directv and fios and neither of my systems did an automatic on or off. 
    BUT my samsung TV upstairs does have that feature (auto on and off)   and I have not checked my mitsubishi downstairs. 
    so you may want to check your settings on your TV to see if it will do it, like my samsung does. 

  • Downloaded new version of itunes lost my library now itunes won't save my library have to install my library everytime i turn computer off itunes store will not open either have tried a few ways to solve problem from community members nothing works

    downloaded new version of itunes lost my library now itunes won't save my library have to install it everytime i turn my computer off  itunes store won't open either with almost 16,000 songs this is getting unbearable if someone wants to download new version it's a nightmare

    I had the same problem on my iphone 5s, and this fixed it. http://support.apple.com/kb/TS5335

  • XR11 voice remote no longer turns CC on/off

    My XR11 voice remote generally works great. Even when I speak, "Turn on (or off) close captioning", it recognizes the phrase perfectly (as displayed on my TV screen). At some point within the past few weeks, however, close captioning fails (nothing happens) and I must turn it on/off with button pushing (down, right, right, Ok, etc.). Why does the XR11 no longer work for CC? FWIW ... in case this was caused by a recent firmware update to my DVR, my Comcast profile indicates that it's a PX013ANM device. Settings/About indicates the following:
    Release Version: xappl-XRE.53PE
    XRE Server Version: 1.53.03 05/29/2015 16:12
    XRE Protocol Version: 2.80
    Receiver: Native version: 2.0.2
    STB Timestamp: Sat May 30 04:58:36 2015
    eCM MAC: ... n/a
    STB Version: PX013ANM_2.0.2p4s1_PROD_HYBse
    Device ID: ... n/a
    Environment: b3cf
    Remote Battery Level: 70%

    Rick,
    If I recall, a couple of the new Comcasters (possibly Nick and TomDJ) said they were looking into this. TomDJ said he was on the voice remote team so the right people know about it.
    Anon24542 wrote:
    My XR11 voice remote generally works great. Even when I speak, "Turn on (or off) close captioning", it recognizes the phrase perfectly (as displayed on my TV screen). At some point within the past few weeks, however, close captioning fails (nothing happens) and I must turn it on/off with button pushing (down, right, right, Ok, etc.). Why does the XR11 no longer work for CC? FWIW ... in case this was caused by a recent firmware update to my DVR, my Comcast profile indicates that it's a PX013ANM device. Settings/About indicates the following:
    Release Version: xappl-XRE.53PE
    XRE Server Version: 1.53.03 05/29/2015 16:12
    XRE Protocol Version: 2.80
    Receiver: Native version: 2.0.2
    STB Timestamp: Sat May 30 04:58:36 2015
    eCM MAC: ... n/a
    STB Version: PX013ANM_2.0.2p4s1_PROD_HYBse
    Device ID: ... n/a
    Environment: b3cf
    Remote Battery Level: 70%

  • How to get business activity with status open for a given BP ?

    Hi,
      I want to get the business activity status for a given business partner.
      To be more specific , consider the following customer service scenario:
    Requirement:
    Customer will call the call center
    Call center will create that business partner and BP will be assigned to proceed with the customer requirement
    A report program has to be generated to get the list of customers pending for the given business partner
    Things done:
    I have created a business partner(consumer) through the transaction CIC0
    Now I need to write a report program which will fetch all customers pending(with business activity status open) for a given business partner
        The thing is we are not able to find out where the status of the business activity is maintained.
        Is there any BAPI to meet out this requirement? or is there any other way?
    Regards,
    Arokiaraj. S,
    Asian Paints

    Hello,
    Try BAPI BAPI_BUSPROCESSND_GETLIST to get the activities for a BP and CRM_ORDER_READ to get the status.
    You also use FM CRM_STATUS_CHECK to check the status.
    Regards,
    Frédéric
    Message was edited by: Frederic Schoenaers

  • TS1367 My MacBook air has a blinking file folder icon on a blank screen with a ? In the center of the icon. I've tried turning on and off three times but it hasn't helped.  Any suggestions?

    My MacBook Air has a blinking file folder icon on a blank screen with a ? In the middle of the icon. I've tried turning my computer off and on three times with no luck.  Any recommendations on how to fix the problem? 

    Reinstall OS X without erasing the drive
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Reinstall Snow Leopard
    If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    Download and install Mac OS X 10.6.8 Update Combo v1.1.

  • How to turn the surround-sound-like effect off with headphones?

    When I plug in the headphones into my ipad I notice the sound in the headphones becomes kinda surround-like. For instance I clearly hear keyboard clicks "at a distance" in front of me when using headphones. This "effect" is nice for keyboard clicks but totally ruins any music listening experience because any song gets distorted and is perceived at some distance when played. This becomes extremely annoying when listening to mono content. The special sound processing applied to get this surrround-like sound effect adds artefacts into the sound, please let me know how to turn this off Apple, I couldn't find any option in the settings.
    Overall, I couldn't even imagine I'd get such an annoying and unprofessional effect applied by default without a possibility to turn it off. If I knew that in advance I'd never buy my ipad since currently it's not possible to listen to music with it
    Message was edited by: vvtrus

    vvtrus, did you ever consider that turning off the clicks or other sounds might have an effect? So, before telling people who want to help you that an answer makes no sense to you, you might first try it.
    Since hearing and listening to music is a very subjective matter which also depends on the quality of the headphones you use, it might be the case that you hear on your iPod something that you couldn't hear on your laptop and portable music player (both of non-apple design). Then you should blame those other devices to deliver you such poor sound. On the other hand, you might have a better hearing than other people which might give you the impression of surround-sound-like effects -- in which case we can't help you either.
    Anyway, there are no settings to turn on or off "surround sound effects".

  • My iphone5s was accidentally disconnected while updating OS8.2 in my MacBook Pro and now it's stuck with an apple logo on its screen and won't turn on or off. What should I do?

    My iphone5 was accidentally disconnected while updating OS8.2 in my MacBook Pro and now it's stuck with an apple logo on its screen and won't turn on or off. What should I do?

    Connect to iTunes and restore. If you have difficulty, you may have to put the device into Recovery Mode. See the instructions in this support document. If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support

  • My iTunes Store on IPhone comes up with an error ([newNullResponse]). It is just on the music tab, tv shows and movies tab works fine. I have tried restarting phone, closing app, turning my account off and on. What is the problem I need help?!!!!

    My iTunes Store on iPhone comes up with an error [newNullResponse] always when I click the music tab. The movies and tv shows tab works fine. I have tried everything from restarting my phone to turning my account off and on.

    Try a different cable and a different charger. If neither fixes it you probably need a new battery. Apple will replace it for $80 in the US; I don't know what the charge is in other locations.

Maybe you are looking for