Turning off Backup drive--Time Machine
What happens if i turn off my backup drive (it is a bit noisy) without touching Time Machine? Will, eg, all new files created while it was off be added to the backup when I turn the drive back on?
Thanks
All that will happen is you will get a dialogue box that comes up saying TM couldn't find the drive. If your EHD is noisy and that bothers you get a better drive. The ones I tend to recommend I'll list below. Once the drive is reconnected it will backup the new and/or changed files since the last backup.
OWC Mercury Elite Pro series
LaCie d2 Quadra series
G-Tech G-DRIVE series
All are similar in build quality and feature sets. Personally I have 4 of the LaCie's and have been using them for 4 years, all have performed without any issues. However I'd be happy to also have the OWC or G-Tech's on my desk too.
Similar Messages
-
Negative Effects of Turning off Spotlight on Time Machine Drive
My external WD HD used exclusively for TM was going into what seemed to be an infinite spotlight reindexing loop after I upgraded to 10.6.8. The only way I have been able to ge it to stop was to select that drive under spotlight privacy settings. Does anyone know of any negative effects of doing this, other than the obvious negative of not being able to use spotlight on my TM backups?
Many thanks!@sanjampet; What does a link to Xsan servers have to do with Time Machine?
PJGNC wrote:
My external WD HD used exclusively for TM was going into what seemed to be an infinite spotlight reindexing loop after I upgraded to 10.6.8. The only way I have been able to ge it to stop was to select that drive under spotlight privacy settings. Does anyone know of any negative effects of doing this, other than the obvious negative of not being able to use spotlight on my TM backups?
Many thanks!
Read Pondini's excellent TM articles; http://pondini.org/TM/Home.html
Spotlight can't read the TM volume; it should be excluded as you have done. -
Turn off animation in Time Machine?
Does anyone know how to turn off the animation when browsing through files in time machine? I can not stand to look at it because it makes me nauseous. I am hoping there is a way where you can click the date or the window you want and it would instantly go there rather than watching all of the windows fly by. Thanks!
mbcf97 wrote:
Any expertise you could offer on the subject, I would greatly appreciate.
Come here for advice instead of Best Buy.
If you are encrypting a drive that already has data on it, then it will take a long time. You can continue to use the drive, and even shut off your machine, but it will still take a long time. The best approach is to erase a new external drive immediately and encrypt it right away. Then the encryption will only take a few seconds.
Either way, once it is encrypted, it will work fine and be just as fast an an unencrypted drive. As long as you know the password to the drive, you can restore it to any machine. You can even store the password in iCloud Keychain if you want. I keep all of my drives encrypted. Then, even if someone steals the drive, they will never get the data. -
Is there a way to get my photos off an old time machine backup from an external hard drive?
Is there a way to get my photos off an old time machine backup from an external hard drive?
You will have to connect the Time Machine HDD and click on the Icon. You will see one folder called Backups.backupdb. Click on that and you will have to continue until you find the home folder. The iPhoto library (where the pictures are, not the application) will probably be in your pictures folder. You will have to drag that to your desk top. Then you will have access to individual images.
Ciao. -
I bought a new external hard drive for backups, but time machine won't do a full back up.
I think it is remembering backing up onto previous external hard drives, which I don't own anymore. How do I do a new full backup?
When I bought the new (used) iMac, I also bought an external hard drive for backups. It worked fine, but my husband stole it.
Then I bought a new external hard drive (Seagate) and it worked fine for three weeks, then died.
So I just got a new external hard drive, which was put together from an internal hard drive and a hard drive enclosure.
Time machine did the first backup today, and it should have taken 9 hours like it did on the previous first time full back up. Instead, it took 30 minutes. That can't be right. I want to start over and do a full backup to make sure everything gets onto my new external hard drive, but I can't figure out how to do that. Please help.Triple-click anywhere in the line below to select it:
tmutil compare -E
Copy the selected text to the Clipboard (command-C).
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V).
The command will take at least a few minutes to run. Eventually some lines of output will appear below what you entered.
Each line that begins with a plus sign (“+”) represents a file that has been added to the source volume since the last snapshot was taken. These files have not been backed up yet.
Each line that begins with an exclamation point (“!”) represents a file that has changed on the source volume. These files have been backed up, but not in their present state.
Each line that begins with a minus sign (“-“) represents a file that has been removed from the source volume.
At the end of the output, you’ll get some lines like the following:
Added:
Removed:
Changed:
These lines show the total amount of data added, removed, or changed on the source(s) since the last snapshot. -
I am running my first backup on Time Machine using a Seagate external hard drive with a thunderbolt adapter and cable. I have a MacBook Pro 2011. It is backing up 11GB, and is telling me it will take approx two days. Is this normal?
Download the supplemental fix to 10.7.5
http://support.apple.com/kb/DL1599 -
Purchased a new, larger solid state drive to replace my old drive. I installed OSX then I had Time Machine do it's magic.
Now when I want to do a backup using Time Machine, it tells me that the external HD is full. When I did so prior to upgrade, it would erase old backups and then do a new backup.
Please help. I am worried about losing files, and am tired of seeing the "Time Machine hasn't backed up in xxx days" Error Message.
Thanks.it thinks yours is a new machine so it doesn't want to start deleting another machine's backups
see the bottom of this page
http://pondini.org/TM/19.html -
Since updating OS to Mountain Lion from leopard, I get the following error message when trying to backup with time machine on external drive. "Could not complete backup to media share. The network backup disk does not support the required AFP features." What are AFP features and how do I get Time Machine to backup to my current external backup?
This means that your NAS does not support the required encryption. Update your NAS to the latest firmware or ditch it and buy a Time Capsule (they are the most reliable when using TM).
-
hi, I have a macbook pro with a new hard drive installed and restored. My WD external drive backup on time machine now wont let me access the files. I get a prompt saying 'you do not have permission to access the files' After my new drive was installed I plugged in time machine and it started backing up. I paused it when I realised that it was running for more than a few minutes. I now realise that it probably started backing up the new hard drive all over again. Which makes me think that the original back up must be on the WD back I cant seem to access it. Any ideas would be helpful.
See E-10 in the first link.
Time Machine Troubleshooting
Time Machine Troubleshooting Problems -
My external hard drive (1TB WD My Book Essential) suddenly has no room to backup with Time Machine! I am using Maverick OS and wondered if it is because of a bug in the system software. I purchased a new external drive with 3 TB and wonder if I will run into a problem installing it. I don't know how to transfer my files from the previous HD to the New one. I was told to use a cable, but how do I do it? Do I connect them both to the computer and drag the old into the new? How is it done? Why did this happen, the overloading of the Time Machine?
Why has the TimeMachine drive run out of space?
With the limited amount of information you've provided it is hard to answer this question. TimeMachine should continue making backups until the drive is full and then it should erase the oldest backup(s) to retrieve enough space for the next backup. Unless your computer's hard drive has close to 1TB of space on it, you shouldn't see a message saying TM cannot backup because it is full. However if you do have more than 500GB (1/2 a TB) then I can see how that message might occur. Also, if you are using the TM drive for double duty (backing up more than one computer or storing data other than TM) you could get that message.
Will you have this problem with a 3TB drive?
I always recommend that people look at how much they'll be backing up in total, add a bit extra for the future, and then multiply that by at least 1.5 and even better to double it. That indicates how large the TM backup drive should be. The TM drive should only be used for TM backups. It is ok to use one drive to back up more than one computer but if doing so, add up the contents of all the computer drives, adjust for the future and then double it.
Moving Forward
Disconnect the old TM drive for now. Connect the new drive and let TM do its job. I don't recommend that you try to transfer the TM backup from the old drive to the new one. Keep the old drive around for a couple months just in case you find you need it and then after a few months, if you like, you can erase it and use it for something else. -
After an install of Lion, my secondary internal hard drive used for backup and time machine is not showing on the desktop. Cannot be located with Disk Utility either. Contains vital files! please help...
I have a TB internal drive, but this is what it shows for memory slots:
Memory Slots:
ECC: Enabled
DIMM Riser B/DIMM 1:
Size: 2 GB
Type: DDR2 FB-DIMM
Speed: 800 MHz
Status: OK
Manufacturer: 0x0000
Part Number: 0x000000463732353642363145353830304600
Serial Number: 0x00000000
DIMM Riser B/DIMM 2:
Size: 2 GB
Type: DDR2 FB-DIMM
Speed: 800 MHz
Status: OK
Manufacturer: 0x0000
Part Number: 0x000000463732353642363145353830304600
Serial Number: 0x00000000
DIMM Riser A/DIMM 1:
Size: 1 GB
Type: DDR2 FB-DIMM
Speed: 800 MHz
Status: OK
Manufacturer: 0x80AD
Part Number: 0x48594D5035313241373243503844332D5335
Serial Number: 0x42076007
DIMM Riser A/DIMM 2:
Size: 1 GB
Type: DDR2 FB-DIMM
Speed: 800 MHz
Status: OK
Manufacturer: 0x80AD
Part Number: 0x48594D5035313241373243503844332D5335
Serial Number: 0x4207631E
DIMM Riser B/DIMM 3:
Size: Empty
Type: Empty
Speed: Empty
Status: Empty
Manufacturer: Empty
Part Number: Empty
Serial Number: Empty
DIMM Riser B/DIMM 4:
Size: Empty
Type: Empty
Speed: Empty
Status: Empty
Manufacturer: Empty
Part Number: Empty
Serial Number: Empty
DIMM Riser A/DIMM 3:
Size: Empty
Type: Empty
Speed: Empty
Status: Empty
Manufacturer: Empty
Part Number: Empty
Serial Number: Empty
DIMM Riser A/DIMM 4:
Size: Empty
Type: Empty
Speed: Empty
Status: Empty
Manufacturer: Empty
Part Number: Empty
Serial Number: Empty -
Hard drive failure! New hard drive/Time machine backup/iPhone questions
Hello,
I have a 2011 MacBook Pro who's hard drive failed (rather acutely too, I do use disk utility to check it's health regularly) and I bought a replacement to install (SSD!). I have a bunch of questions but have only found partial answers in searches. Maybe it's best to list them:
1. I'd like to do a fresh install of the OS X using OS X Recovery because I'm concerned my Time Machine backup is partly corrupted. I hadn't updated to Mavericks, will I be able to install Mountain Lion? If not: will this be a problem with my backup files?
2. Say the OS X Recovery works, how do I use Time Machine to restore things like my iTunes library/iMessages/email/iPhoto library etc? In other words: just the data I can't get any other way (I hope it's not too corrupted). And/or should I use my iCloud backup on a few of these (iMessages/contacts)?
3. Do I need to set up the new OS X install with the same account names/home disk name etc. for the restored backup files to function?
4. Is this going to f'up iCloud or vice versa?
5. Finally, how do I sync my iPhone to the "new" computer without erasing the iPhone (which had an iOS update since my last backup to Time Machine). Or do I have to restore the iPhone too.
6. How come Apple doesn't have a mobile theme for their website yet?
Any help would be much appreciated,
MattDo you still have the original System Reinstall DVD set that came with your Mac?
If you created that Lion external drive you have from YOUR Mac, when Lion was installed on it, and it also contains a Recovery HD partition you can use that to boot to the Recovery HD and reinstall Lion on the new drive. And or Clone that external to the new internal drive you installed.
Right since your Mac came with Snow Leopard you can't use the Online Internet Recovery system to reinstall Lion, as your system didn't originally come with Lion, but you should still be able to boot to it to do diagnosic things like using Disk Utility, going to the Net to get help and even Restoring the system from a Time Machine backup. But you will get an error if you select Reinstall Mac OS X. The firmware update is usually applied with system updates.
If you created a New Time Machine Backup when any of the Download Only version of OS X were installed on your internal drive Time Machine, the system, Copies over the files needed to boot the system from that backup drive. If it was a care over backup from when Snow Leopard was installed is might or might not be bootable. Only way to tell is to connect it and at startup hold down the Option key to get the Boot selection screen, IE The Boot Manager screen, and see if it shows up as a Boot Source. If it does thenn it contains the files needed to get to the Mac OS X Utilities, IE the Recovery HD files.
What you should do is Boot the system from either the Time Machine backup, if it is bootable, or your External that has Lion on it, The Recovery HD if that drive contains a Recovery HD, or your Original Snow Leopard reinstall DVD that came with your Mac and then try to Restore from your Time Machine backup drive.
If that fails to restore your system properly then nyou should reinstall Snow Leopard and the iLife Apps from the Original Discs then upgrade to Mt Lion which will be in the Mac App Store under your Purchases area. Then maybe you can restore your files from that Time Machine backup.
scardanelli wrote:
I've had a bunch of issues with my computer (you can look at some of my other questions on these forums) which, to my mind anyway, seemed to be finally given a diagnosis when my HD crashed. It may be paranoia but there have been enough problems that I'd rather do a clean install to be on the safe side.
I have an early 2011, shipped with Snow Leopard.
I was under the impression that Time Machine can't be used as a boot drive and the OS X Recovery is a firmware update (on my computer) or hard wired in (on later computers). I might be wrong. I was planning on using the internet recovery, the HD failed right after I got some password protected files unencrypted and onto an external drive (was that necessary?) but wasn't sure if it's a problem if it installs Mavericks.
So Setup Assistant will configure my accounts the same and I don't need to worry about that? That's a relief.
Thanks for the lengthy response. -
I recently bought a WD My Book Live to backup using Time Machine, now that I've upgraded to and my old NAS won't support Mountain Lion. The WD drive appears in the Finder, but it doesn't appear as an option when setting up the backup disc in Time Machine. Any ideas please?
" now that I've upgraded to and my old NAS won't support Mountain Lion. "
Do you have a few words missing in the original question ?.
When i upgraded from LION to MOUNTAIN LION it made NO difference at all to my MyBook Live !!!
reading the original post again and again, do you in fact have two My Book Live units, an old one and a new one ?
tim -
Online Backup for Time Machine Drive?
I've been looking around at the major names in online backup and most of them won't let you back up external drives, but I found BackBlaze and it looked good till I found out that it specifically won't allow you to backup a Time Machine drive to its service.
Does anyone know of a good online backup service that will let you back up your time machine drive?i second Thomas' remarks.
you may want to consider Dropbox for that redundant backup.
JGG -
Backing up to a thumb drive - time machine doesn't delete older backups when it's full. I will have to erase and re-do the drive. Why?
You are both right.
Time Machine can backup FROM:
It cannot back up a USB thumb drive.
Time Machine can backup TO:
•A USB thumb drive (but most aren't large enough, and are very, very slow)
Maybe you are looking for
-
Just bought a Mac Pro...I have SO many questions!
Ok, so I ordered a healthy version of the Mac Pro this morning. 250 GB HD, ATI x1900 card, 2 GB Ram, bluetooth/airport, 2.66GHz etc. Now I have a few questions since I want to know the tech side of things more clearly than I do. 1) RAID: I'm studying
-
InDesign update CS5.5 won't open new file / can't get monitor RGB colors
My biggest problem...a job to do a b&w booklet for a 50th class reunion ready for printer. Tried PS. Downloaded trial of Publisher, but haven't tried. Upgraded Creative Suite to 5.5 to use InDesign. Everything I set as prefs, formats, etc. as soon as
-
Although my phone appears in my computer it does not appear in itunes, why?
although my phone appears in my computer it does not appear in itunes, why?
-
Hi Guys, I need to handle the sub-urls dynamically. For example, I have three entries in database table. aaa, bbb, ccc; to represent different divisions of the web-application. How can I manage three urls for each division like below. www.hostname.co
-
HT201412 My iphone 5 doesnt turn and I put it on charge but still doesnt turn on
My iphone 5 doesnt turn and I put it on charge but still doesnt turn on So what should I do ?