Turning off filters with keyframes

Hi I am relatively new to After Effects. I have a timeline with footage and I have applied the Bad TV2- old effect from Special Effects. After 2 seconds though, I would like to fade out the effect, and have the footage return to normal. But because the Bad TV2 effect is made up of 5 filters, is there a simpler way of doing it rather than adjusting all of the parameters in each of the filters? I've tried duplicating the footage and applying the effect to the top layer and then keyframing the opacity of the top layer, but doing this dilutes the effect of Bad TV2 effect. Is there a proper way of doing this? Any help would be greatly appreciated. Thanks

The easist way is to use an adjustment layer. Apply the effects and tehn keyframe the opacity of the adjustment layer to fade the effects.
Steve

Similar Messages

I have just installed Lion OS and Face Time encounters server problems on sign up. I have sought the firewall problem without success and even temporarily turned off firewall with no success.

I have just installed Lion OS and Face Time encounters server problems on sign up. I have sought to rectify the firewall problem without success and even temporarily turned off firewall with no success. Any ideas?

Some folks have discovered that changing their DNS service fixes FaceTime connection issues.
The ideal way is to configure your modem/router with DNS service, but often settings in System Preferences/Network/Advanced/DNS on your Mac will override the router settings. Try either of these;
OpenDNS
208.67.222.222, 208.67.220.220
Google Public DNS
8.8.8.8, 8.8.4.4

I can't turn off wifi with Control Center

I can't turn off wifi with Control Center after updated ios 7.0.6

It's running
I already checked dmesg and nothing happens. It works with Vista, so...
With my old laptop (it's the same model) brightness didn't work, and now this. I guess i'll wait for a new update

Grey screen with message "turn off computer with power button until switch off then press again power button"

Dear all,
I'm very hungry with my iMac and my Time Capsule :
I try for two weeks to restore my iMac without any success...
I wait 80 hours to finally have the message again and again : "to restart your computer : turn off computer with power button until switch off then press again power button".
But my iMac do not work !
Could you help me?

Hello, that's a kernel panic...
http://thexlab.com/faqs/kernelpanics.html
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X 10.6 Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.

9300 turns off even with full battery

Hi, I hope somebody can help me... Long story here...
I bought my 9300 in Istanbul, where I live. I have a Vodafone Turkey simcard and Vodafone Spain simcard. I swithch simcards when I travel, works beautifully, even with email and whatsapp.
Last year I had an issue whith battery draining in less than 2 hours every morning. After reinstalling software and getting rid of all apps (incl whatsapp) it eventually came back to life and the battery started lasting for 2 days again. I must say I did the upgrade of OS while in Spain (I don't know if it makes a difference...)
A couple of weeks ago (now I am in Istanbul), same thing happened. It is just that this time the battery doesn't drain, the phone just shuts itself off, normally in the middle of a conversation or trying to send a whatsapp, and with full battery.
The first few times, taking the battery off and sim and putting it back in did the trick. After a couple of times, however, it is not working anymore. This it what happens:
BB turns off completely.
If I try to turn on, it does not even try.
If I remove battery and simcard, it restarts and is ok in all processes but when it is looking for network signal, it turns off again.
I remove battery and simcard second time, and it does not go through the software verification, it turns off again.
After this, the only way to bring it back to life is to plug it in, and then it restarts and with full battery!! I unplug and I can use email for the next 3-4 hours, until some hours later, same problem all again. I carry my charger everywhere!
I have the latest OS available, and I have got rid of whatsapp, which last year I think it was the beginning of the solving of the problem (whatsapp releases new versions constantly, I think upgrading it did the trick. Or was it just chance?), but it is still not helping so far.
My husband has the same model, never a problem. We exchanged the batteries, no luck either.
Any ideas?

Mucolly wrote:
Help guyz my phone turns off itself with a full battery of which I deceded to buy new original battery but problem persist and when I charge its working when I unplug my phone goes white on the screen which is switching itself off help guyz.
Hi and Welcome to the Community!
There are many things already posted in this thread...have you yet read and attempted any of them?
You also may want to attempt to boot into Safe Mode:
KB17877 How to start a BlackBerry smartphone in Safe Mode
It may take you multiple attempts to get the ESC key sequence (press/release/hold) correct, so be patient. When successfully into Safe Mode, see what happens.
If the behavior ceases, then think carefully...what happened just before this behavior started? A new app? An update? A Theme? Something else? Think carefully as the smallest change could be causal...and attempt to undo whatever that was.
But, if the behavior continues, you may need to consider more drastic actions -- e.g., WIPE, OS Reload, BBSAK Wipe/Reload, "bare bones" OS loading, etc.
Do also keep in mind that, if the problem is at a hardware level, then no amount of self-diagnosis nor internet-distance recommendations will be of any use...only in-hand evaluation by a qualified hardware technician can properly diagnose a hardware problem.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

How do you turn off apps with the iOS 7 update

how do you turn off apps with the iOS 7 update

Double tap the home buttons and swipe upwards on the preview of the App (not the App Icon).

Turning off imessage withe no iphone

How to turn off imessage withe no iphone

Try changing the password on any iMessage identifier you used (e.g., iCloud ID).

I am turned off completely with GarageBand..I did delete it and re installed but now it's claiming not enough memory, which I guess is a push for me to install more memory. I will do it but I will use garage band as my sou d board only while recordinelse'

II am turned off completely with GarageBand..I did delete it and re installed but now it's claiming not enough memory, which I guess is a push for me to install more memory. I will do it but I will use garage band only as my sound board only while recording on something else and the. I will delete it.. Real P I A....

How do I upgrade the ram?
The 2 places I’ve seen recommended most to buy reliable RAM are below. I have purchased RAM several times from Other World Computing and have always been very satisfied with the product and service. They have on-line instructions on how to replace the RAM. OWC has also tested RAM above what Apple states is the maximum. I now have 6GB installed on a machine supposedly limited to 4 GB.
Crucial
Other World Computing
Do a backup, preferably 2 separate ones on 2 separate drives.
Revert to a Previous OS X - Yosemite
Revert to Snow Leopard
If you do revert, I'd use Setup Assistant to restore your data. This process takes a while, so do it when you won't need the computer for several hours, based on my experience.

My Macbook Pro turns off suddenly with no reason

My Macbook Pro turns off suddenly with no reason. The battery it's ok, the temperature of the mac it's normal, but the pc turns off. What can i do ?

Xirver,
if you boot into Safe mode, does your MacBook Pro turn off suddenly then also?

I tried to turn off VoiceOver with my iPod touch

I tried to turn off voice over with my iPod by plugging it in to my Mac but it says that because there is a passcode on there I cannot get in to my iPod and I will not wipe it out. What do I do?!?? I cannot get VoiceOver off

Hi,
If you wish to have voice over off then follow these directions.
Directions:
1. Go to settings
2. Go to general
3. Scroll down and go to accessibility.
4. The first thing should give you the option to enable or disable VO
Simple!!!!!!!

Turning off color with eprint/airprint

I have a Laserjet Pro 300 color MFP. I no longer have an immediate need for the color capability. I do a lot of printing from my iPhone, and if the page I am on has color, the printer (of course) prints in color, wasting those very expensive color cartridges. Is there some way to completely disable the color function on this Printer, either through the printer app or at the printer? What if I just take out the color cartridges?

HI Ramon, After PRINT and in the Epsom R2400 dialogue box (layout page) there are only the following selections offered:
Color matching (nothing available to select)
Paper Handling
Paper Feed
Cover Page
Printer Features (use for my selections but no ability to to turn off color management)
Summary
In CS2 there was a color management Dialogue Box and I selected NO Color management and printed with confidence,
Am I missing something here? Do you use Match Print Colors?
Falling behind in my work and appreciate your time, Roy

Set up my Outlook sync but need to turn off sync with Sent, Drafts and deleted folders

When I go into settings it greys out these as they are already checked. So I selected Sync all email folders assuming I could turn off the already selected folders but it only allows me to select additional folders vs uncheck existing folders.
Help!
Jason
Solved!
Go to Solution.

Hi and Welcome to the Community!
To function properly and seamlessly, it needs to be syncing those folders all the time. As you are writing a message, it needs to be auto saving to the Drafts folder, and synchronizing to the server so as to protect from catastrophic device failure. Likewise, Sent Items need to be constantly placed onto your server as that is an equally necessary function. Likewise with deleted items (though there may be separate issues there).
Suffice to say that, if the box is already checked AND it's grayed out, then you can't affect the setting.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

BT Router turns off wifi with radio app

Hi everyone. I have had BT broadband for a year with no problems. In the last two weeks when I try to listen to TuneIn radio app any Apple device, the wifi router immediately turns off. Wifi works perfectly for all other apps and stays connected when computers, iPads, iTouches, iPhones are in use. I can't work out what has suddenly happened for internet radio to cut out the wifi immediately I press the play arrow. Any thoughts would be gratefully appreciated. THANK YOU.

If you have done a full factory reset, then things would be back to where they were when you first got the home hub.
Its not likely to be a broadband issue, but its possible that TuneIn radio is overloading the wireless network somehow.
Its worth trying these thing first.
Try giving the 2.4Ghz and 5Ghz frequencies different SSids (names). Just add a 5 to the end of the 5Ghz SSid so you know which is which. Check the 5 GHz Sync with 2.4 GHz: is set to NO.
http://bt.custhelp.com/app/answers/detail/a_id/44798/~/i-have-problems-connecting-5ghz-and-dual-band...
Also make sure that you have "smart set up" turned off. See link how to do that.
http://bt.custhelp.com/app/answers/detail/a_id/44328/~/switching-smart-setup-on-and-off-on-the-bt-ho...
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Files and font sync turn off working with InDesign..

Hi
Files and font sync turns off when I work with InDesign directly on the CC disctop files folder. It use to be ok to work directly in sync mode, but apparently not any more. I guess the problem is the backup file that InDesign creates, that consist of signs behaps not allowed (?). It use to work for me, but not any more..?
Do anyone els have the same problem?
Jørgen

Hi again
Thanks for your reply. In the Creative Cloud Help page I get, it says: "Save and close the file when you're done editing it and the error goes away.", but I actually have to reconnect. The bad thing about this is that it turns off the font sync as well when I was working.
I have temporarely solved the problem, simply be changing the name of the file I'm working on. I have tryed to reproduce it with a different name - all with leagal signs according to the page mensioned above - with no success (which is positive). Then I tryed to move the file to a new folder within the folder I was working on, and then it worked without problem. Strange.
I guess, if I run in to the same problem again, I will just try to change the name.
Thanks
J

Can't turn off swiping with Magic mouse

I have the magic mouse with a brand new 27 inch iMac, running OS 10.6.2. The magic mouse is almost unusable in any spreadsheet because the sheet will suddenly shift left and right because of my tendency to have two fingers on the mouse. This is true in Excel as well as Google's online spreadsheets. So I decided to turn off two finger swiping, but it still does it! Do I need to revert to a regular mouse or is there an easy fix?

I am experiencing a somewhat similar problem with the Magic Mouse: I cannot disable the lateral scroll feature. This is terribly frustrating whenever coming across a page that extends beyond the width of the screen: It is virtually impossible to scroll vertically without some concomitant lateral scrolling!
I've spoken with Apple Care about this... and the techs there were "surprised" that lateral scrolling could not be disabled! Their advice: wait until some 3rd party utility comes along to solve the problem!

Turning off filters with keyframes

Similar Messages

Maybe you are looking for