Turning off Macbook Air Display when using External Display on Lion

I had been searching the web and the community forums here for a few hours and finally figured out how to turn off the display on my Macbook Air 2011 running lion and using an external monitor.
With Snow Leopard all you had to do was plug in the external monitor to your MBA then close the lid and wake up the MBA while it was closed. Then you could open up the lid and it would stay off so it would have better air flow and wouldn't get too hot and run the fan all the time.
But ever since Lion, they screwed that up for us.
But after all my searching I finally found someone here give the fix on a MBA.
All you need to do is use a little magnet and put it where the MBA
Special thanks to ronaldfromjakarta and wv636 for giving the answers and workaround until Apple fixes this oversight
"I found a solution for this.. my solution is to put a fridge magnet directly right to the return key (about 2 cm away from the right usb port)... so the laptop thinks the lid is closed and so the display is off.. lol.. try it.. it works.."
You can read more about others using this here: https://discussions.apple.com/thread/3192733?start=0&tstart=0
In this example I used a big yellow magnet just to test it out, but I will be using a small thin magnet for regular use so that it wont mess up my screen if I accidentally close the lid on it.
Also I put a small piece of paper between the magnet and my MBA so that I wont scratch my MBA.
Some will also ask if it is safe to use a magnet on your MBA etc. You are only placing a magnet where the magnet from the lid would go anyway's. Just make sure you don't use a super magnet or something and you should be all good ;-)
Here are the image examples:
MBA is powered on
MBA is now asleep
Just place the magnet right next to the "Enter/ Return" key
(Note: I used a small piece of paper under the magnet to protect from scratching my MBA)

I also made a video

Similar Messages

  • How do I turn off display when using external display

    Using HDMI cable via thunderbolt port to show movies on 50" Panasonic TV. How do I turn off MBAir display?

    Hello Wallclock,
    The article linked below details how to go about using your MacBook Pro in closed-clamshell mode (i.e. only utilizing your external display).
    How to use your Mac notebook computer in closed-clamshell (display closed) mode with an external display
    https://support.apple.com/en-us/HT201834
    Sincerely,
    Allen

  • Can you turn off the charging feature when using accessories?

    Can you turn off the charging feature when using accessories with the iPad?

    You cannot overcharge the battery when using the power adapter. Once the battery is fully charged, the iPad will no longer continue to charge if it is still connected. I leave my iPad on the power adapter for hours on end - on weekends when I am not at work.
    iPad - Charging the Battry
    http://support.apple.com/kb/HT4060
    About the iPad Battery
    http://www.apple.com/batteries/ipad.html
    These are both worthwhile reading for concerns about the battery and how to properly maintain it.
    I know nothing about external speakers with the iPad since I do not use them - but If the speaker is with a dock of some sort that charges the iPad - you should have no worries. If it is a dock that charges the iPad - I know of no way to turn off the charging feature, but it will not shorten the life of the battery anyway as long as the battery is properly maintained and cared for.
    Message was edited by: Demo

  • MacBook Air - windows 7 / Bootcamp - External Display NOT WORKING

    I run Windows 7 (Bootcamp) on a 9/2011 MacBook Air, how can I run an external display? Settings only give single display option there seems to be no way to either just display on an external display or to extend to an external display. Is this a bug?

    You also may want to post in the Boot Camp forum, there may be some MBA users that can help you.

  • Macbook air crashed when using USB.

    My macbook air crashed when I plugged in my new portable charger in the USB, and it refuse to start again. Nothing is happening when Im trying to start the mac. Is the macbook totally destroyed or can I fix this in some way? appreciate your help!

    You should also ask this in the MacBook Air forum. This is the forum for the white and black plastic MacBooks that were discontinued in 2010. You should also post this question there to increase your chances of getting an answer.
    https://discussions.apple.com/community/notebooks/macbook_air

  • Close the macbook pro when using external display

    Hi
    I would like to know if is recomended to close the laptop when using an external display? i ask because i read somewhere that the system take ventilation through the keyboard? is better to work with the laptop always open? or doesn't matter if is closed?

    Third opinion...
    I had a 2.16GHz 15" MacBook Pro that I used as a presentation machine at some trade shows in '07 and I once ran the machine with the lid closed, hooked up to an overhead projector looping a movie for 11 hours. When I finally shut it down for the night the machine was pretty warm (it was well ventilated) and was immediately usable. Out of curiosity the next day I ran it with a lid slightly cracked and the unit was significantly warmer at the completion of my day.
    The only thing I could justify as the temperature difference is that the LCD was on and causing heat in addition to the video card. I guess I would have been curious to leave the lid slightly cracked and then manually set the backlight to off.

  • Sleep issue when using external display

    I use my macbook(lid closed) with an external apple cinema 20" display. When I wish to put the computer to sleep, when I will not be using it for a while, I click on the sleep menu item either in the drop down finder menu or by clicking on sleep from the menu that appears when I touch the display button. I have had erratic reponse from doing this using both methods of putting the system to sleep. Sometimes the macbook goes into sleep mode and sometimes it turns the display and system back on after a short pause following the activation of the sleep button.

    Do you use a wireless mouse or keyboard?
    I had the exact same problem with both my mini and my old ibook G4. Try unplugging one peripheral at a time from your usb ports to pinpoint which (if any) is causing the problem. This can take a while if the problem is intermittant like you say!

  • Closing Shell when using External Display

    I just purchased an external display for my MacBook for a more comfortable experience when sitting at home. Everything works great. I was just wondering if closing the MacBook's shell will cause the MacBook to over heat?

    Hi Michael,
    No it will not. The ventilation system on the unit is not obstructed when the lid is closed.
    Enjoy!

  • Computer turns off after 20 minutes when using battery

    I only have 8 months with my computer and when I use it on battery life it turns off without warning after 20 minutes and the indicator showed that it could continue running for 2 more hours.

    Reset the PMU (power management unit) and Re-calibrate the Battery

  • Need menu bar on BOTH displays when using external monitor

    How can I have the menu bar on BOTH displays without using the "Mirror Display" mode???
    I bought a Thunderbolt and use it with my MBA. It works fine overall but this is still like having one display instead of two. A real downer!!
    There are 2 modes:
    Mirror Displays: (identical screen: why waste valuable screen realestate?)
    "Normal" mode: where it gives you access to the 2 monitors independently (you can move apps. windows and locate them on any screen you want).
    In the "Normal" mode, you can move the menu bar from one display to the other but it does not resolve the problem. We need TWO menu bars, which work identical and can be used on whatever display the mouse cursor happens to be.
    Currently, let's say I have applications A & B displaying on MBA, applications C & D displaying on TB, and the Menu Bar on TB. It is a nightmare to work!!!! Anytime I want to work on A or B I have to move the mouse side way to get to the MBA, then to use the menu, I can't even move up into the TB all the way to the menu bar: I have to move through the side onto the TB then up to the menu bar, select, down through the TB, side way to the MBA, and on and on and on....
    Anybody knows how to duplicate a functional menu bar without Mirror Display?
    Anyway of simplifying this nightmare?
    Thanks

    I asked the same question a few days ago, got some other options then ...
    https://discussions.apple.com/message/16953617#16953617
    Many many things to try ...

  • MacBook Shutdown when using external display (DLP TV)

    I have a latest gen. MacBook. I just purchased the new wireless keyboard and mouse so that I can use the computer with my HD TV with VGA input. The setup works fine in two screen mode (laptop display as well as TV). However I want to use it with the TV as the only display.
    I close the laptop and wake it up via the bluetooth keyboard with the TV attached. The screen comes on as it should and works fine for 3-5 seconds. Then the computer goes back to sleep. I don't understand what's wrong. Perhaps the laptop is looking for some type of response back from the TV? The same thing works fine on my Dell monitor. The computer stays awake with the monitor as the only display and the wireless keyboard and mouse as the only inputs.
    My TV is a 61" Samsung DLP with VGA input. I'm using the new apple wireless keyboard and mighty mouse.
    Does anyone have a similar setup that they can try this on for me? Has anyone run into the same issues?
    Thank you for your help.

    One thing you've neglected to mention is whether you have the MacBook plugged into its AC adapter. The behavior you describe of the MB going right back to sleep is what happens if you try and do what your doing running from the MB battery. So check and make sure the AC adapter is connected and working.

  • Kernel_task high cpu usage when using external monitor at 1080p

    Specs
    Model Name:          MacBook Pro
      Model Identifier:          MacBookPro6,2
      Processor Name:          Intel Core i7
      Processor Speed:          2.66 GHz
      Number Of Processors:          1
      Total Number Of Cores:          2
      L2 Cache (per core):          256 KB
      L3 Cache:          4 MB
      Memory:          4 GB
      Processor Interconnect Speed:          4.8 GT/s
      Boot ROM Version:          MBP61.0057.B0C
      SMC Version (system):          1.58f15
    My external display is a Samsung PX2370 connected to my MBP using an HDMI cable with a HDMI-to-miniDP adapter
    I first noticed this after the last EFI update several months back. At first I thought kernel_task eats up too much cpu cycles whenever an external display is attached, but it turns out this only happens when the external display is set to 1080p. When external display is set to 720p, kernel_task is pretty much normal (~5% cpu usage) but rises up to ~150% cpu usage once the external display is set to 1080p.
    kernel_task cpu usage is also with normal range when my MBP is connected to a Samsung LCD TV at 720p.
    Anyone having the same problem or know of any fix/workarounds?

    Seems like the problem persists when playing a 720p video on the external display set to 720p. To sum it up
    Video Resolution
    Main Display
    External  (1280x720)
    External (1920x1080)
    480p
    ok
    fluctuating kernel_task cpu usage (~5 to ~150 cpu usage)
    high kernel_task cpu usage
    720p
    ok
    high kernel_task cpu usage
    high kernel_task cpu usage
    1080p
    ok
    high kernel_task cpu usage
    high kernel_task cpu usage

  • When I try to burn a CD off of my MacBook Air (from iTunes) using the external CD drive, it acts like it is burning the CD, but then when I try to play it the CD is blank.

    When I try to burn a CD off of my MacBook Air (from iTunes) using the external CD drive, it acts like it is burning the CD, but then when I try to play it the CD is blank.

    Many thanks for the diagnostics.
    Failed while scanning for CD / DVD drives, error 2380.
    Error while opening iTunes CD driver.  This could be caused by a corrupted iTunes file or a conflict with other older CD burning applications, either currently installed or previously installed and uninstalled incorrectly.
    With that one, I'd start with solution 3 from the following document:
    iTunes for Windows: Optical drive is no longer recognized, or "Disc burner or software not found" alert after install

  • I have a 17" Macbook pro with flickering red and cyan(blue) lines across the screen. The issue disappears temporarily when I tap on the computer, and the problem does not occur when I use external display or try to screen capture the problem.

    I purchased my Macbook (17") through a certified apple tecnition in August 2012, it was refurbished and the motherboard was completely replaced. I do a lot of photo editing, but I have been unable to do so because of the red vibrating lines that interrupt my screen. The issue disappears temporarily when I tap on the computer, and the problem does not occur when I use external display or try to screen capture the problem. I brought the computer back to the technition I purchased it from and he said that it was a problem with my fan, so I have two new fans but the issue is still occuring. He says he doesnt know whats wrong. Does anyone have any information on this issue?
    Here is an image of the issue
    http://www.flickr.com/photos/67839707@N08/8884847081/

    I recommend having your Mac serviced by someone competent. A force sufficient to "blow apart" the fans was clearly excessive and may have damaged the display cable, as well as any number of other problems.
    Dust is properly cleaned with a vacuum, preferably one designed for computer service, and they are not cheap.
    Compressed air should never be used. It just blows dust everywhere, often into places where it can no longer be removed.

  • My macbook air (version 10.9.4) display flickers, has random tabs and windows opening, and there are random ads almost everywhere. All this happens when I am using safari. What can I do?

    My macbook air (version 10.9.4) display flickers, has random tabs and windows opening, and there are random ads almost everywhere. All this happens when I am using safari. What can I do?

    1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
    Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
    2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
    There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can read it yourself without disclosing the contents to me or anyone else.
    You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
    In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
    You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
    Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
    4. Here's a summary of what you need to do, if you choose to proceed:
    ☞ Copy a line of text in this window to the Clipboard.
    ☞ Paste into the window of another application.
    ☞ Wait for the test to run. It usually takes a few minutes.
    ☞ Paste the results, which will have been copied automatically, back into a reply on this page.
    The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
    5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
    6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
    7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
    Triple-click anywhere in the line of text below on this page to select it:
    PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */   /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;/(de|[nst]):/p;' ' {sub(/^ +/,"")};/r:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n   "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n   [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n   ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,Inter,iTu,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    8. Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
    9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
    exec bash
    and press return. Then paste the script again.
    10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
    If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
    11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
    [Process completed]
    to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
    12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
    At the top of the results, there will be a line that begins with the words "Start Time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
    If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
    13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
    14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
    Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Maybe you are looking for