Turning off the default outcome in workflow step

Hi,
In a workflow step, I linked a method xxx, in method xxx I have coded 2 outcomes, when i use this method in my step I am getting a default outcome "Step executed" outcome in addition to the outcomes already coded in the method. so instead of 2 outcomes i get 3 outcomes, i am not able to turn off the default outcome. is their anyway working around this problem? please help.
Regards
Narendiran Rathinavelu

Hi,
Can you be more specific when you say "overwrite" i went to the tab outcomes and try deactivating it, but it is not allowing me to, please help.
Regards
Naren

Similar Messages

How do I turn off the default radio in my music app. I cannot play my playlist until it first defaults to radio and then I have to start all over. this is very tedious!!!

how do I turn off the default radio in my music app. I cannot play my playlist until it first defaults to radio and then I have to start all over. this is very tedious!!!

This got me curious when I first saw it... It does indeed seem very Un-Apple-like (at least historically) to prevent a user from customizing their own device - Mac or iDevice - but today I'm unsure. I cannot grasp how a UX designer could leave a simple "OFF" switch out of the control panel. Another thing that Music Data Streaming does is eat up your Data Plan.
This May not be the exact issue as you describe, but seems to solve an issue of a Radio Playlist in iTunes resuming where it left off from the last use...
My Carly girl May 18, 2014 6:25 PM
Re: How do you turn off i tunes radio on the ipad air once it starts playing songs? in response to Betty91545
Play last song on list, songs will then stop. Works for me on iPad. Haven't tried yet on iPhone.
It is likely that THIS may be part of the real reason to push the iTunes Radio feature - revenue stream (nobody remembers "Payola?"):
Apple is more beholden to the shareholders than in the old days

Turn OFF the default F14 = Brightness key?

Apologies if this covered elsewhere, I’ve been going round in circles here and on my own Mac!
I want to turn OFF the default F14 = Brightness key.
I use my own quick keys in Photoshop and it won’t let me overwrite the F14 Brightness for an action I’ve set up. It is driving one nuts!
Thanks…

You could try this app. http://www.macupdate.com/info.php/id/11127
it should let you program all the f-keys the way you want.

Inline scripting and turning off the default chrome flex 4 (flashbuilder 4.5)

With the release of Flashbuilder 4.5 -flex 4 got some changes to the way coding was done.
My questions are:
Inline scripting - How is this done? for example:
If this condition is met show button x as enabeled - else - disabled.
Default chrome - setting the system chrome to none does nothing for me. It doesnt turn it off Oo How is this done?

For the defualt chrome I have tried:
flash.display.NativeWindowSystemChrome.NONE;
and
<systemChrome>none</systemChrome>
Upon launchinf - the deafult windows 7 system chrome is still present....

How do I turn off the default message preview pane?

When opening mail for the first time, there is a preview pane just below all of my message in the inbox. When I message is selected it displays the content of that message in this pane. How do I disable this view? I am using the latest version of Apple's mail application.

I found the answer here.
http://docs.info.apple.com/article.html?artnum=25502

Remove age from birthday notification: I don't know the years most of my contacts were born, so I keep getting a default year 2000 birthdate. How can I turn off the age (xxth birthday) in Birthday Calendar - it really is very annoying!

I don't know the years most of my contacts were born, so I keep getting a default year 2000 birthdate.
How can I turn off the age (xxth birthday) in Birthday Calendar - it really is very annoying!?
Thanks
Tim

Where do you see the default birthday showing as Nov. 30? If you can explain that, I can probably modify the below script to do that clean up.
In response to the original problem:
I'm not sure why I missed the original reply, but here is an Applescript that will change all the years of any selected contacts to 1604 (default for no year).
tell application "Contacts"
          set thePeople to selection
          repeat with aPerson in thePeople
                    set theDate to birth date of aPerson
                    if theDate is not missing value then
                              set the year of theDate to 1604
                              set birth date of aPerson to theDate
                    end if
          end repeat
end tell
copy and paste it into a new Applescript Editor document. Select all the contacts you want to change (in Contacts), then run this script by clicking on the green Run button in Applescript Editor.

How does one turn off the format column as the default

I would like to have the Format sidebar "off" as the default when opening Numbers. How can I do this?

I am not aware this is possible. I tried saving a document where I had turned off the sidebar as a template and when I opened the template the sidebar was still visible.

HT5100 I want to turn off the autoplay feature. I'd like ITunes to stop after one podcast. The latest version has changed the default for playback.

I want to turn off the autoplay feature in iTunes. I'd like iTunes to stop after one podcast. The latest version has changed the default for playback.

Make sure that the system time and date on your computer are set correctly.
If "I Understand the Risks" is missing then this page may be opened in an (i)frame and in that case try the right-click context menu and use "This Frame: Open Frame in New Tab".
You can retrieve the certificate and check details like who issued certificates and expiration dates of certificates.
*Click the link at the bottom of the error page: "I Understand the Risks"
Let Firefox retrieve the certificate: "Add Exception" -> "Get Certificate".
*Click the "View..." button and inspect the certificate and check who is the issuer of the certificate.
You can see more Details like intermediate certificates that are used in the Details pane.
Note that some firewalls monitor secure (https) connections and send their own certificate instead of the website's certificate.

I am having difficulty updating my iphone apps. Living in Bermuda it keeps wanting to default to the Bermuda store, which does not exist. I turned off the location services which appears to solve this problem, but I use this function a lot so do not want

I am having difficulty updating my iphone apps. Living in Bermuda it wants to default to a nonexistant Bermuda app store. I solved by turning off the location finder, but this is a function I use and need, and dont want the hassle of constantly switching back and forth. Is there a simple solution

I agree. I don't rely on iCloud as a backup, that is what I have my portable hard drive for. Its 500 GB so I can hold my entire iTunes library several times over on it. I have all my movies on my hard drive, but somehow "The Mist" got deleted off of my hard drive, so I figured "Well, the option to redownload an already purchased movie is available through iCloud, I'll just do that!"
And permissions and download availability have nothing to do with it, the movie's still there, it still allows me to redownload it. The only problem is when I click download, I get that message.
And nobody else uses my computer, but I do have multiple accounts authorized on it. Even still though, I am attepmpting to download it through the account I purchased it under. :/

FAQ: UI - How can I change the color theme, size of the text, or turn off the application frame?

CHANGING THE INTERFACE COLOR SCHEME:
The Photoshop CS6 default interface is dark, but if you prefer the lighter interface you are used to from earlier versions,
you can change it back in the appearance area. There are 4 default color themes.
Mac Photoshop > Preferences > Interface
Windows Edit > Preferences > Interface
CONFIGURING LARGER FONTS:
For those who need larger fonts, you can also change the UI Font Size down in the type area.
Be sure to restart Photoshop to see the changes.
TURNING OFF THE APPLICATION FRAME
CS6 opens now by default in "Application Frame". You can go Window>Application Frame in the main meu and uncheck this

Select the title / text and then click on the "i" (inspector). A colored pin wheel shows up after you click on the square box directly below the font settings inside the inspector window. Then simply drag the dot to the color you want. Like this:
click here
Message was edited by: SDMacuser

S1 Yoga - How to turn off the built-in display/monitor?

Hi,
Trying to find a way/hotkey to turn off the built-in display whilst I'm connected to another external monitor with the Thinkpad S1 Yoga model. Do you guys know how to do it?
I could even remap any of the default hotkeys if someone knows how to do that as well, as the defaults are not too useful for me...
Thank you!!
Solved!
Go to Solution.

Hi Mickael28,
Thank you for the reply!
You can set the under power settings, to perform please go to control panel -- power option, in that click on ‘Change plan settings’ and click on ‘Change advanced power settings’, you will get new window with ‘Advanced Settings’ go to Display option and under ‘Turn off display after’ change the setting as per your requirement.
Turn off Display after
Hope this helps!
Best regards,
Hemanth Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

The monitor on my macbook is turned off while I was working, I could not in any way to do it again, I could see through the screen off the open pages I was working on, I had to turn off the machine and restart it. and it runs. O.O?

The monitor on my macbook is turned off while I was working, I could not in any way to do it again, I could see through the screen off the open pages I was working on, I had to turn off the machine and restart it. and it runs. WHAT 'success? The report says the console like this: (at approximately 12.30)
No receipt for 'com.apple.pkg.JamPackWorldMusicInstruments' found at '/'.
03/05/11 12:08:30 [0x0-0x1e01e]. Com.apple.garageband [239] No receipt for 'com.apple.pkg.JamPackWorldMusicInstruments' found at '/'.
03/05/11 12:08:30 [0x0-0x1e01e]. Com.apple.garageband [239] No receipt for 'com.apple.pkg.JamPackOneInstruments' found at '/'.
03/05/11 12:08:30 [0x0-0x1e01e]. Com.apple.garageband [239] No receipt for 'com.apple.pkg.JamPackOrchestralInstruments' found at '/'.
03/05/11 12:08:30 [0x0-0x1e01e]. Com.apple.garageband [239] No receipt for 'com.apple.pkg.JamPackRhythmSectionInstruments' found at '/'.
03/05/11 12:08:30 [0x0-0x1e01e]. Com.apple.garageband [239] No receipt for 'com.apple.pkg.JamPackRemixToolsInstruments' found at '/'.
03/05/11 12:08:32 MIDIServer [255] MIDIServer [255] starting; arch = i386
03/05/11 12:34:35 com.apple.launchd [1] *** launchd [1] has started up. ***
03/05/11 12:35:06 com.apple.launchd.peruser.501 [86] (com.apple.ReportCrash) Falling back to default Mach exception handlers. Could not find: com.apple.ReportCrash.Self
03/05/11 12:35:09 com.apple.launchd.peruser.501 [86] (com.apple.Kerberos.renew.plist [110]) Exited with exit code: 1
03/05/11 12:35:25 [0x0-0xd00d]. Com.skype.skype [127] WirelessAttach: IOServiceOpen error: e00002c7
03/05/11 12:35:25 [0x0-0xd00d]. Com.skype.skype [127] WirelessAttach: IOServiceOpen error: e00002c7
03/05/11 12:35:26 [0x0-0xd00d]. Com.skype.skype [127] WirelessAttach: IOServiceOpen error: e00002c7
03/05/11 12:35:26 [0x0-0xd00d]. Com.skype.skype [127] WirelessAttach: IOServiceOpen error: e00002c7
03/05/11 12:35:32 [0x0-0xd00d]. Com.skype.skype [127] WirelessAttach: IOServiceOpen error: e00002c7
03/05/11 12:35:33 [0x0-0xd00d]. Com.skype.skype [127] WirelessAttach: IOServiceOpen error: e00002c7
03/05/11 12:35:33 [0x0-0xd00d]. Com.skype.skype [127] WirelessAttach: IOServiceOpen error: e00002c7
03/05/11 12:36:06 com.apple.WindowServer [64] Tue May 3 12:36:06 MacBook-Pro-17-of-Admin.local WindowServer [64] <error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint () to catch errors logged as They Are.
03/05/11 12:43:39 helpd [160] Response failed Because Listener can not find a port for this QueryID.
03/05/11 12:43:43 helpd [160] Response failed Because Listener can not find a port for this QueryID.
03/05/11 12:43:43 helpd [160] Response failed Because Listener can not find a port for this QueryID.

Do you have backups of all the data on the startup drive? If not, do nothing else until you've backed up that data, if you still can.

How can I turn off the WLS 6.1 security in order to develop my own application-based security module?

Dear Colleagues,
I am currently developing a J2EE application using WLS 6.1.
My team and I have to implement a security requirement to suit our company's needs.
The security requirements are that, users' password need to be aged (30 days maximum) and we need to provided a GUI front-end (JSP) to allow users to change their password when these expire after 30 days.
Our internal contacts in the company, have already taken the lead to find out about whether we will be able to use the WLS 6.1 platform to do this and the answer we got back, was.
Now we need to develop our own security module.
I have 2 questions:
1. How can we turn off the WLS security in order develop our own application-based security module?
2. How can we develop a security module that allows us to age users' password and provide them with facilities to change their passwords when these expire?
At the moment, we are using the default BEA WebLogic login.jsp page and there some configuration in the web.xml for this. I will be grateful if you could advise me on how to turn this default security off so that we can write our own security module.

hi,
1.You can write your own realm in 61 which can plugged for your security
calls.
2. once you write your ownrealm.. you can access it through weblogic
api/ur api..
thanks
kiran
"Richard Koudry" <[email protected]> wrote in message
news:3dd0d081$[email protected]..
Dear Colleagues,
I am currently developing a J2EE application using WLS 6.1.
My team and I have to implement a security requirement to suit ourcompany's needs.
>
The security requirements are that, users' password need to be aged (30days maximum) and we need to provided a GUI front-end (JSP) to allow users
to change their password when these expire after 30 days.
>
Our internal contacts in the company, have already taken the lead to findout about whether we will be able to use the WLS 6.1 platform to do this and
the answer we got back, was.
>
Now we need to develop our own security module.
I have 2 questions:
1. How can we turn off the WLS security in order develop our ownapplication-based security module?
>
2. How can we develop a security module that allows us to age users'password and provide them with facilities to change their passwords when
these expire?
>
At the moment, we are using the default BEA WebLogic login.jsp page andthere some configuration in the web.xml for this. I will be grateful if you
could advise me on how to turn this default security off so that we can
write our own security module.

How can I turn off the preview (overview) automatically executed when I launch Image Capture?

I love using Image Capture, but every time I launch it, it automatically does a previes of my scanner's flatbed. Most of the time, I don't use the flatbed. I use the feeder to scan multiple pages.
My question is this: Is there any way to turn off the automatic preview (overview) that Image Capture executes when it's launched?
Thanks in advance for any and all assistance!

Not a direct answer.
From Image Capture Help:
Scan pages with a document-feeding scanner
When you scan a document with a document-feeding scanner, the same settings are used for all the pages in the feeder. If your pages need different settings (for example, some are grayscale and some are color), separate them into different groups.
Before you begin these steps, you need to open your scanner. For instructions, see one of these help topics:
Scan an image
Scan an image with Image Capture
Scan an image with Preview
Place the pages in the scanner’s document feeder.
Turn on the Use Document Feeder option, if it’s present.
Set scanning options.You may need to click Show Details to see all the available options.Here are some of the options you can set. The options available to you depend on the scanner you’re using. Some options aren’t available on all scanners, and some scanners may have more options.
To choose the type of image being scanned, use the Kind pop-up menu.Choose Text for black-and-white images with high contrast, such as text. Choose Black & White for grayscale images. Choose Color for color images.
To scan both sides of a page, select Duplex.
To choose a size for the scanned image, use the Size pop-up menu.
To choose where to save the scanned images, use the Scan To pop-up menu.If you choose a folder, the images are stored in that folder. If you choose an app, the images are opened with that app.
To adjust the colors or exposure of the scanned image, choose Manual from the Image Correction pop-up menu, and adjust the controls.If you don’t see the image correction controls, scroll down or make the Scanner window taller.
Click Scan.The scanner scans the pages one by one.

How do i turn off the STUPID gestures? every time i quickly scroll a large page i get switched to previous sites i've been at, very, very annoying! i hate gestures!

i'm using firefox 4.0 on an amd cpu running suse linux 11.4. i've completely turned off the gestures in suse (one of the first things i do, i can move a mouse very quickly and i like it to be a mouse!), i can't find a plugin or setting to turn these damn things off. the main problem is when i use the scroll wheel to rapidly move up or down a long web page and wind up on another page suddenly, very, very annoying! i really, really HATE gestures! then again i know how to use buttons etc. and i do mouse very quickly and creatively ( i also turn off several other "conveniances" like automatic window resizing, i know how to manage windows.....) thanks, i really, really hate these "features" being on by default, people with certain disabilites are probably also highly annoyed by the lack of choice in some procucts.
you really, really need to provide easy access to more settings, as evidenced by the number of extensions aimed at providing control to users. thanks

You can set all the mousewheel.with*.action prefs to 0 to perform a scroll.
mousewheel.withnokey.action
mousewheel.withaltkey.action
mousewheel.withcontrolkey.action
mousewheel.withmetakey.action
mousewheel.withshiftkey.action
To open the about:config page, type about:config in the location (address) bar and press the "Enter" key, just like you type the url of a website to open a website. 
If you see a warning then you can confirm that you want to access that page. 
If necessary then you can also set all the browser.gesture prefs to empty String values.

Turning off the default outcome in workflow step

Similar Messages

Maybe you are looking for