Turning off the phone part overseas?
I won't use my phone in Turkey, but can I turn just that off and use the itunes, the wifi stuff?
Thanks
Yes, put in Airplane Mode and then turn on WiFi. Itunes will work no matter what.
Similar Messages
-
hhello, please help if you can,,,
i had a new screen installed, everything working fine, as was using the phone, the next day I was flying so turn off the phone in the usual way...
oon arrival turned the phone on, received a slow acting black background with the apple sign visual, but never moved from that......... So tried a reset still the same just left looking at the apple sing in the middle if the screen,makes it there for 5 mins but still never turn on completely,,,,,
again I tried,,,,,, again I tried a reset, then started to received lines of white writing, about 4-5 lines slowly like it was being typed, which stateed INCORRECT SHUTDOWN, ????????? then took out my MacBook air, to connect to ITunes to see whaypt I could do,
i tunes did not find the phone as would normally so opened ITunes manually, still did not find the Iphone,,,,,
Any Ideas please, as it is useless stuck in the drawer, I am an apple user, an quite knowledgable having other Iphine 5, IPad air and Mac,,,,, I am stuck,,,,
PLease Help,my hank you in advanceSharmFarm wrote:
Good ev Ning Mario49 firstly I would like to say a great thank you for your attention to trying to help me,,,,, i have looked at the links and will try everything stated first thing…
Hi Mario,,,,
I tried everything in your reply,,, thank you again,, I had done that once before and all was working great,,
I have just now tried the Reinstall via iTunes, about 20 into the download, the iTunes logo on the phone disappeared, and the Apple Logo appeared again,,, I waited until the iTunes stated that the download had finished, and the install was in progress,,,
Nothing happened, still the Apple Logo was visual on the screen, iTunes never recognised the phone which it was on my iTunes account previously,,,
Still just a bunch of lines, maybe 5 or 6 so small writing,, I personally can not read what it is telling me, someone said it reads, incorrect shutdown,,,????????
Please advise,???
I am now at a loss,,, I really became excited when I saw the iTunes icon after putting the phone into restore,,,???
Thank you again
D -
When I turn off the phone, the screen flashes with sony logo. any solution?
Hi,
when I turn off the phone, the screen flashes with sony logo. any solution?repair your phone with
Update Service (SUS)
PC Companion (PCC)
Bridge (for Mac)
Alternatives on How to backup Xperias
http://talk.sonymobile.com/thread/36355
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994) -
I turn off the phone will not turn to dear, I need the photos...
I turn off the phone will not turn to dear, I need the photos emergencies because there I have very important information. That I can do to recover photos. I understand that you had downloaded the iCloud but when I Icloud not appear on photos.
Through iTunes, plug it in and you should be able to do a iCloud restore
-
I just tried to update my iPhone 4 and it said it was successful, but now I have a message (USB icon - arrow- iTunes icon) that is frozen? I have turned off the phone, unplugged USB and reconnected and closed out of iTunes and back in. Any suggestions?
Hello, Spedellen.
Thank you for visiting Apple Support Communities.
When experiencing issues restoring an iPhone, here are the best articles to go through. If you received a specific error number when restoring, see the section labeled Get more help in the second article below.
If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
Resolve iOS update and restore errors in iTunes
http://support.apple.com/kb/ts1275
Cheers,
Jason H. -
How can I turn off the ability to turn off the phone from the lock screen for more security?
How can I turn off the ability, to turn off the phone, from the lock screen for more security?
There is no such option.
There will be some additional features included with iOS 7.
http://www.tuaw.com/2013/06/10/ios-7-to-include-security-feature-dubbed-activati on-lock/ -
I just learned how to listen to music on my Apple Radio Station, now please tell me how to turn it off! I had to turn off the phone to make the radio stop playing!
As when stopping the play of a song with the music app.
There is a pause button and a fast forward button to the next song above the volume level indicator at the bottom. Select the pause button which will turn to a play button. When wanting to start playing again, press the play button. -
IPHONE photos erased when you turn off the phone
I have a new IPHONE 3G phone .I can take pictures with the phone which are fine until I turn off the phone. When I turn it on again the photos taken with the IPHONE have disappeared.
The red arrow on the screen when you hold the top button down for a 3-5 seconds is the Power Off slider, which you move across the screen with your finger. Just pushing the top button momentarily puts the phone to sleep. Either way, the photo should be saved. If the photo is not saved to Photos>Camera Roll (and you are sure you are looking at Camera Roll and not another Photo Album), then you must have a corruption somewhere. If the Restore did not work, the only other option besides taking the phone in to Apple is to do another Restore and don't put anything back in until you try the Camera function, just to rule out the possibility that you are reloading a corruption. I've seen no other posts here about this, but it might be worthwhile to do a search and see.
-
If my phone be stolen the stealer can turn off the phone without security code. Why?
If my phone be stolen the stealer can turn off the phone without security code. Why?
Because that's the way it is designed. If you don't like it, don't purchase an iPhone, or tell Apple you don't like it:
http://www.apple.com/feedback/iphone.html -
I get a msg that the phoen wasn't backed up to the cloud and i won't go way. It also won't let me log in or turn off the phone.
Have you tried a reset ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider if it appears), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot. You can then do a backup
-
How can I turn off the phone saying "Call from" #/name when getting incoming call.
How can I turn off the phone saying "Call from" #/name when getting incoming call before the ring tone starts? I have a LG accolade
I recommend checking your prompts and alerts to turn this feature off. This may be you "Call Connect" or "Readout" alerts. Listed below are steps to update this feature.
With the flip open, press the Voice Command Key (on the left side of the phone).The Voice Commands feature has several settings which allow you to customize how you want to use it. Access Voice Commands, then press the Right Soft Key[Settings]. Your choices are below:
-Confirm Choices--- Automatic/Always Confirm/ Never Confirm
-Sensitivity--- Control the sensitivity as More Sensitive/ Automatic/Less Sensitive
-Adapt Voice ---If the phone often asks you to repeat voice command,train the phone to recognize your voice patterns.Train Words/ Train Digits
Prompts ---Mode/ Audio Playback/Timeout
* For Mode, set Prompts/ Readout+ Alerts/ Readout/ Tones Only.
* For Audio Playback, set Speakerphone or Earpiece.
* For Timeout, set 5 seconds or 10seconds. -
Iphone 4 slide unlock is frozen, unable to turn off the phone
IPHONE 4 SLIDE UNLOCK IS FROZEN, UNABLE TO TURN OFF THE PHONE.
PLEASE ADVISEdo a reset, hold down the home/power button together until you see the apple logo and then release, then wait for the phone to boot back up. Then try powering off your phone.
-
I have iphone5s and there is some problem about my iphone. I turn off the phone and then I turn on. After I turned on, It showed the page of apple signal and then the page of loading. It used long time to show the loading page. Then it was back to page of apple and then loading page again many times. What happen with it? And what should I do?
Did you already try to reset the phone again by holding the sleep and home button for about 10sec, until the Apple logo comes back again?
If this does not work, try to set it up as new device, explained here:
How to back up your data and set up as a new device
You may have to connect in recovery mode, if the phone is not recognized in iTunes:
iOS: Unable to update or restore -
Streaming audio data won't stop unless I turn off the phone for 5 minutes.
I have been testing the Curve 8330 regarding streaming audio from an icecast server. The address of the station is http://www.AirProgressive.org, click on "listen". (I have already run this by the icecast experts and they say it is a Blackberry "bug")
BLACKBERRY USERS! PLEASE BE AWARE THAT THE STREAM (dataflow) DOES NOT STOP WHEN YOU CLICK "STOP" ON THE MEDIA PLAYER! (and will continue for as long as you leave it on, and even if you turn off your BB for less than 5 Minutes.) I'm not sure if you are charged for these streams, but it seems that the battery is depleted rapidly if this continues without aborting it. See details of my testing below:
> Access icecast stream by clicking on the link on the website:
http://www.airprogressive.org:8000/stream.m3u
> Stream consists of mp3 at 32kbps / 22050 Hz.
> Stock media player launches, stops at "Do you want to open or save the item."
> No connections started yet (viewing "List Clients" page of icecast admin interface).
> Click "open", stream begins playing.
> Two connections are started instead of just one, always offset by 2 seconds.
-- but sometimes only one connection starts.
> FYI, Icecast config: <client-timeout>30</client-timeout>
Here is the output from the "List Clients" page of Icecast2 Admin
IP
Seconds Connected
User Agent
Action
68.7.238.55
406
WinampMPEG/5.62, Ultravox/2.1
Kick
74.82.68.16
6
Mozilla/4.8 [en] (Windows NT 5.0; U)
Kick
74.82.68.16
4
Mozilla/4.8 [en] (Windows NT 5.0; U)
Kick
Note the last two entries with the same IP address. This is the Blackberry. Top entry is winamp player on PC for reference. Don't know why two listener connections are generated.
> Stream is "Stopped" (i.e. click stop)
> Stream is restarted (i.e. click Play)
> A new connection is started, this time with a new +1 IP address.
IP
Seconds Connected
User Agent
Action
68.7.238.55
687
WinampMPEG/5.62, Ultravox/2.1
Kick
74.82.68.16
287
Mozilla/4.8 [en] (Windows NT 5.0; U)
Kick
74.82.68.16
285
Mozilla/4.8 [en] (Windows NT 5.0; U)
Kick
74.82.68.17
8
Mozilla/4.8 [en] (Windows NT 5.0; U)
Kick
I can understand that the player may continue to communicate when "stopped" to fill the lookahead buffer, but when it is restarted, it should use the same connection and not start a new one.
> Click Stop.
> Click Play.
IP
Seconds Connected
User Agent
Action
68.7.238.55
803
WinampMPEG/5.62, Ultravox/2.1
Kick
74.82.68.16
403
Mozilla/4.8 [en] (Windows NT 5.0; U)
Kick
74.82.68.16
401
Mozilla/4.8 [en] (Windows NT 5.0; U)
Kick
74.82.68.17
124
Mozilla/4.8 [en] (Windows NT 5.0; U)
Kick
74.82.68.18
24
Mozilla/4.8 [en] (Windows NT 5.0; U)
Kick
> Yet another connection is started with a new "listener".
> Click "back" to exit from browser in Blackberry.
> All threads continue.
--> I have tested this many times and the threads continue without being cleaned up indefinitely, even though the player is stopped and the stream is not "playing" on the handset.
> Turn off mobile network. Handset not communicating.
> Threads continue
> Handheld turned off.
IP
Seconds Connected
User Agent
Action
68.7.238.55
995
WinampMPEG/5.62, Ultravox/2.1
Kick
74.82.68.16
595
Mozilla/4.8 [en] (Windows NT 5.0; U)
Kick
74.82.68.16
593
Mozilla/4.8 [en] (Windows NT 5.0; U)
Kick
74.82.68.17
316
Mozilla/4.8 [en] (Windows NT 5.0; U)
Kick
74.82.68.18
216
Mozilla/4.8 [en] (Windows NT 5.0; U)
Kick
Finally, after over 300 seconds, the threads are finally cleaned up.
IP
Seconds Connected
User Agent
Action
68.7.238.55
1139
WinampMPEG/5.62, Ultravox/2.1
Kick
So, to stop the streaming server from communicating with the Blackberry handset, you must either turn it off or disable mobile network for at least 5 minutes.
It appears that the handset continues to transfer data (and therefore incur charges, if the user does not have an unlimited data plan) if the handset is not turned off or mobile network disabled for at least five minutes. It also runs down the battery much faster because the radio transmitter is actively being used, even if the user is not listening to the stream.
The Blackberry network has intervening servers that continue to receive data from the streaming server even if the handset is off. This behavior likely has utility to deal with the realities of the cellphone network, to allow the stream to be transferred from one cell to another, and deal with the possibility that the handset may be out of range for up to 5 minutes without "interruption." However, it is hard to turn off the stream.
QUESTIONS:
1. Is there a way to stop this sort of behavior using a configuration setting or something? It seems particularly stupid to start a new stream connection each time a STOP/START cycle is completed, allowing the old connections to continue streaming data (even if the data does not make it to the handset).
2. IS IT TRUE that the user will be "charged" for the data streams that are not disconnected?
3. Is there a way for a developer to send a signal to the intervening cellphone network to discontinue the orphan streams?
THANKS!!No, I'm using something like this :
to start...
channel = new SoundChannel();
soundPlay = new Sound();
urlReq=new URLRequest;
urlReq.url=mylUrl; // url of radio mp3
soundPlay.load(urlReq);
channel = soundPlay.play();
to stop it...
channel.stop();
channel=null;
try{soundPlay.close();} catch (e:Error) {} // error or not, the sream won't stop.
Any idea ? Did you try with a NetStream object ?
Bernard -
But when received, the image is invalid, and the mail states that the message has no content. Help, please!
Hello Bunk94,
It sounds like iMessage may be activated with the wrong phone number. Let’s see if we can resolve this. First, go ahead and sign out of iMessage and FaceTime:
If you can't send or receive messages on your iPhone, iPad, or iPod touch - Apple Support
http://support.apple.com/en-us/HT204065
Sign out and back in to iMessage and FaceTime
Go to Settings > Messages > Send & Receive, tap your Apple ID, then tap Sign Out.
Go to Settings > FaceTime, tap your Apple ID, then tap Sign Out.
Afterwards, turn iMessage and FaceTime off and restart your device:
If you get an error when trying to activate iMessage or FaceTime - Apple Support
http://support.apple.com/en-us/HT201422
Turn off iMessage and FaceTime and restart
Go to Settings > Messages and turn off iMessage.
Go to Settings > FaceTime and turn off FaceTime.
Restart your device.
Turn iMessage and FaceTime back on.
Thanks,
Matt M.
Maybe you are looking for
-
Is PSE a long lasting app or must it be upgraded every year
I'm just wondering before i spend the 100 dollars on Photoshop Elements 8.0 if it can be an application that can last several years (like Microsoft Office) or would I need to dish out the hundreds of dollars ever year for the upgrade. I was looking a
-
Hi there I have changed to a new internet provider, and they configured my router (which was working fine previously with my Apple devices) It is a D-Link router, and it is connected to the internet via PPPOE. (previous provider did not have this PPP
-
Problem in creating help input for custom infotype creation
Hi, I had the task of creating a custom infotype for storing recruitment test result. I created it using the following structure: Component ______________Data Element TEST_TYPE______________ZTEST_TYPE TEST_DATE LOCATION PIC_____________________RFPER
-
Big problem-iPod setup doesn't work
I just got a replacement iPod cause my other one got jacked up, and everytime I try to set-up my iPod so my computer will recognize it, the setup restarts my computer to continue the setup and then when it comes back on, the set-up never continues. T
-
How to use an array of references
Hi, I defined a couple of GOOP objects, each of which has a reference. I want to dynamically add/remove these references into/from an array and, in my implementaion, I had this array a globle variable so that different VI's can access it. But I alway