Turning off the thinklight flash when X201 powers up?

Is it possible to turn off the thinklight flash when the X201 first powers up?

I wasn't aware of this, T510/T410 also does the same thing, I'm certain other new series do this too.
Sorry, I don't know how to turn it off, I would suggest looking in BIOS menus or ThinkVantage settings.
Maliha (I don't work for lenovo)
ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]
IdeaPad: U350
Apple:- Macbook Air [Snow Leopard]
Did someone help you today? Compliment them with a Kudos!
Was your question answered today? Mark it as an Accepted Solution!
Lenovo Deutsche Community Lenovo Comunidad en Español
Visit my YouTube Channel

Similar Messages

Phone works great but when on a call proximity sensor kicks in turns off the screen. When I pull the phone away from my head screen is still blank. The force hangup/lock is the only way to bring the screen back on

hi,
phone works great but when on a call proximity sensor kicks in turns off the screen. When I pull the phone away from my head screen is still blank. The force hangup/lock is the only way to bring the screen back on.
I purchaged it before one month onl. So i wont understand how it comes. Please help me. I am waiting for you reply.

"Your face is so ugly, it broke your phone!" Ha ha. Get it? How I was joking there? About your iPhone not working correctly after... <sigh>
But seriously, you said the situation only happens when you have been on a long call, so maybe the iPhone is just autolockng?

Turning off the iPad screen when synchronizing with the iTunes

Quick question: How do I turn off the iPad screen when synchronizing with the iTunes. Is this even possible? Are there settings I am overlooking? Or perhaps a third-party app which can make it happen?
I have a large library and often leave my iPad connected to iTunes for several hours at a stretch. The bright glowing screen can be a big distraction, and, more importantly I am very worried about pixel burn-in.
Cheers,

The iPad LED Backlit IPS Screen is not phosphor-based, so there is no permanent phosphor burn-in problem. You might see some image persistence, but that is not permanent and can be corrected. See this support article about image persistence: http://support.apple.com/kb/HT2807
Since you have already converted your music to 128 kbps, you are unlikely to see any more 10+ hour syncs unless you have to do a restore. In that event, you could select the brightness control in settings to the lowest level.
FYI, there are some apps, such as Night stand HD that are designed to be used for long periods with unvarying displays and I have yet to see image persistence problems reported. However, since the iPad is still a new product, there may be some reports in the future.

How do we turn off the alert emails when we do a search with find my iphone?

How do we turn off the alert emails when we do a search with find my iphone?

You are not talking to Apple on here, we are all fellow users and not Apple employees. You can comment to Apple by giving feedback at http://www.apple.com/feedback
What we have heard is this 'feature' was added as a result of the high-profile downloads of celebrity photos from iCloud accounts.

Can you turn off the charging feature when using accessories?

Can you turn off the charging feature when using accessories with the iPad?

You cannot overcharge the battery when using the power adapter. Once the battery is fully charged, the iPad will no longer continue to charge if it is still connected. I leave my iPad on the power adapter for hours on end - on weekends when I am not at work.
iPad - Charging the Battry
http://support.apple.com/kb/HT4060
About the iPad Battery
http://www.apple.com/batteries/ipad.html
These are both worthwhile reading for concerns about the battery and how to properly maintain it.
I know nothing about external speakers with the iPad since I do not use them - but If the speaker is with a dock of some sort that charges the iPad - you should have no worries. If it is a dock that charges the iPad - I know of no way to turn off the charging feature, but it will not shorten the life of the battery anyway as long as the battery is properly maintained and cared for.
Message was edited by: Demo

How do I turn off the camera lights when recording a video with the Android Turbo?

I want to use the Andriod Turbo camera video function in ambient lighting using the forward lens. But when I start recording both lights stay on. I can video with ambient using the look back lens. Not as good a quality and harder to aim.
Is there a setting that can turn off the lights until I want them? How is it done?
Thanks for the help.

Thank You! Problem solved. I am a new user to 'smart phones' and my original question probably should have been "How Do I Find The Camera Settings Menu?"
It wasn't obvious, but your reply got me searching again. I found that if you drag your finger from the left side of the screen to the center the semi-circular menu appears on the left. There I found the light control and other options.
I didn't know it existed and the manufacturer's manual that came with the phone gave no instructions on the camera operation.
abcdefg4, your comment helped me search a little harder. Thank you again.

How do I turn off the Icloud erase when the phone is turned on?

My husband is a ship captain and He thought he lost his phone, I went through all the procedures of changing his account numbers etc on email
only thing he has on his phone is facebook and email . He didn't have the find my phone app on when he lost it so I deactived it on our cell provider
and from I cloud I set up the find my phone to erase it when its turned on.
Well yes he found it, so I have set back up with the cell service but how do I turn off the find my phone from erasing it when he turns it back on?
And what is it going to erase??
Will he still be able to use it as a phone at least?
thanks for your help!

Too bad. It completely erases the phone so it will be like it was when it came out of the box. He will need to go through the initial setup screens on the phone again to reactivate it before he can use it, and it will require entering his iCloud password to do so.

Thr screensaver turns off the music even when I Set it as yes, screensaver with music. I have restore the appletv, but it still happens.

My screensaver is turning off the music, even if i choose yes, screensaver with music. How to fix that? I have already restored the appletv.

Try manually connecting the device to your PC in Disk Mode and then restoring it iTunes.
From http://support.apple.com/kb/HT1363
Putting iPod devices with a Click Wheel into Disk Mode
If necessary, verify that your iPod has a Click Wheel.
Before placing the iPod into Disk Mode, verify that it is charged.
Toggle the Hold switch on and off (set it to Hold, then turn it off again.)
Press and hold the Menu and Select buttons for at least six seconds, until the Apple logo appears.
When the Apple logo appears, release the Menu and Select buttons and immediately press and hold the Select and the Play/Pause buttons until the Disk Mode screen appears.
Connect the iPod to your computer; the screen on the iPod will should say "Do not disconnect".
If you are having difficulty putting your iPod into Disk Mode, set it on a flat surface. Make sure that the finger pressing the Select button is not touching the Click Wheel. Also make sure that you are pressing the Play/Pause button toward the outside of the Click Wheel and not near the center. If you are still unable to put your iPod into Disk Mode, use one finger from one hand to press the Select button, and one finger from the other hand to press the Play/Pause button.
B-rock

Can you turn off the voice tags when someone rings...

I think the subject says it all, but here's the story - My girlfriend's sister has an E71, and a ringtone she really likes. She wants to be able to hear the ringtone without interruption when people call, but for all my poking about in the menu and settings I can't find a way to turn off the voice tag that announces the name of the person ringing. The tags are somewhat annoying anyway because they don't tend to read Irish names very well 'Grainne' being pronounced as 'grain' and such.
Can those tags be disabled? If they can, how?
Thanks.

also dont forget to activate the profile your using once this is done or it will revert to default
Message Edited by jimmyireland on 26-Jul-2009 12:31 PM
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

Turn off the Auto adjust when shooting tethered in aperture

is there any way to turn off the auto adjust feature in aperture? When I shoot tethered it over corrects and ruins all the shots, then I have to adjust back for the client to get a good idea of the image.

After the disaster of iTunes 11.1 that deleted nearly all my archived podcasts (recovered from backup thankfullly) I was shocked, but not altogether surprised, to see that the option to delete played episodes has been enabled/re-enabled by default.
From the lower right of the Podcasts window click Settings then, if needed, click Defaults, then turn Delete Played Episodes to Off.
Why set the destructive option as the default?
I have many episodes that I want to keep that are no longer available at their feed so the last thing I want is any automatic delete process to be enabled.
tt2

How do i turn off the auto delete when played feature in new update?

how do I turn off the auto delete after playing an item in latest update?

After the disaster of iTunes 11.1 that deleted nearly all my archived podcasts (recovered from backup thankfullly) I was shocked, but not altogether surprised, to see that the option to delete played episodes has been enabled/re-enabled by default.
From the lower right of the Podcasts window click Settings then, if needed, click Defaults, then turn Delete Played Episodes to Off.
Why set the destructive option as the default?
I have many episodes that I want to keep that are no longer available at their feed so the last thing I want is any automatic delete process to be enabled.
tt2

How to turn off the welcome screen when I start Illustrator

Can it be done. I know in earlier version it was under preferences, general. Don't see it in CC.
Thanks!!

cghelton,
I believe this is your rescue:
Re: How can I turn off the Illustrator CC 2014 hello screen permanently?

Do i have to turn off the cellular data when wi-fi is connected?

i have problems with wifi and 3g/edge connection. even if it says that wi-fi is connected, the one downloading my data is 3g/edge. when i turn it off the phone says internet is not connected.

There's no reason to disable cell data when connected to WiFi. How did you determine that cell data network was downloading when a WiFi connecton showed?
Note that when the phone is sleeping, The WiFI connection drops and cell data is reconnected. Any background data transfer while the phone sleeps may be using the cell data network. If you absolutely don't want any cell data network usage, disable it.

Is there any way to turn off the distracting flashing at the top of the screen when hotspot is in use?

When hotspot is in use, a message near the top of the screen on the iphone says "Personal Hotspot: 1 Connection". New in IOS 7.1 is that this message repeatedly fades in and out (about once per second) rather than remaining fixed, and it creates a distraction while one is using the phone. Not sure how other people feel, but it literally makes me (slightly) nauseas to have it continually wax and wane. In 7.0.3 the message was fixed - it did not fade in and out.
Under Settings->General->Accessibility I have already set "Reduce Motion" on. I would think that would be the place to disable such repeated patterns.

You could try a reboot: Press and hold BOTH the power and home buttons at the SAME time for at least 10 seconds (ignore the red slider to shut down) until the Apple Logo appears, then let go of both buttons and your iPad should restart. If that doesn't get rid of the volume control box on your screen, it's time to make an appointment with the Genius Bar at your Apple Store, and they can send your iPad off for service.

How can I turn off the vibration notifications when the battery is full and the phone is left on charger i.e. overnight

I charge my 5s phone at night, and about halfway through the night my phone starts to vibrate to notify me that it is done charging which is great but it constantly wakes me up as it goes on all night. is there a setting I am missing to turn this off? my wife's 5s does not do this nor does my son's

TCZAR wrote:
I charge my 5s phone at night, and about halfway through the night my phone starts to vibrate to notify me that it is done charging which is great but it constantly wakes me up as it goes on all night. is there a setting I am missing to turn this off? my wife's 5s does not do this nor does my son's
The iPhone does not vibrate when it is done charging, it simply stops charging.
Whatever is happening is not due to charging. Its either due to messages, calls, notifications or emails being received.
You can set the Do Not Disturb to stop ringings and vibrations from these types of events from activating during a specified period of time.
Use Do Not Disturb on your iPhone, iPad, or iPod touch

Turning off the thinklight flash when X201 powers up?

Similar Messages

Maybe you are looking for