Turning off VM in guest does not update status in VMM 2012 R2 Update Rollup 2 console

I am seeing an issue with a few VMs where if you turn the VM off from within the guest OS, the status does not change in the VMM console.
Details about the environment:
Six node cluster running Server 2012 R2 Datacenter Core
Cluster validate completed successfully. Only warnings due to some VMs being offline
Virtual Machine Manager 2012 R2 with UR2
251 VMs in cluster used for Citrix XenDesktop and XenApp
I've read a few articles similar to this one that refer to a change in the VM Light Refresher schedule from RTM to SP1. (http://blogs.technet.com/b/chengw/archive/2012/09/17/update-on-vmm-refreshers-what-has-changed-and-what-this-means-to-you.aspx).
Basically it looks like the light VM refresher was turned off and now we depend upon WMI if the environment support WCF 3.0.
Does this mean that we're looking at the WMI on the Host or the Guest? Or, is it possible that I just have WMI corruption in a few guest VMs?
If I want to turn it back on, it seems like I should be able to create a registry DWORD key in HKLM\SOFTWARE\Microsoft\Microsoft System Center Virtual Machine Manager\Settings called VMPropertiesUpdateInterval and set the value. Does this seem plausible?
Would it be supported?

I specifically asked the product team about that.
And this has actually been the behavior all along. However, it was never my experience until after applying UR2.
And this is an experience vs. Product behavior thing. Somewhere in the process something changed with how the one is decided upon when vmm gets more than one match.
I am going to add this to my discussion with them.
Glad we have your issue resolved.
Brian Ehlert
http://ITProctology.blogspot.com
Learn. Apply. Repeat.
Disclaimer: Attempting change is of your own free will.

Similar Messages

When the screen saver turns off my front panel does not refresh.

when the screen saver turns off my front panel does not refresh. If I use the show desktop button sometimes I can not maximize my vi by just clicking on it from the start bar.

I utilize both a screen saver and the show desktop feature but have never seen this problem in the past. You might play around with your screen saver settings to see if they have any affect. You might also try another computer just to make sure something larger scale isn't going on. Also, testing with other programs to make sure it isn't a general OS issue is always a good idea. Other possibilities include changing your Video Driver settings, updating your video driver, and uninstalling - reinstalling.

Tbird will not send. unnown error. works in safe mode. turned off firewall and still does not work. works fine on desktop but not laptop

cannot send on laptop. desktop, with same settings, works fine. getting unknown error on send. please help. here is the setup from the help function.
thanks,
tim
WARNING:
This contains sensitive information which shouldn't be forwarded or published without permission.
Application Basics
Name: Thunderbird
Version: 31.4.0
User Agent: Mozilla/5.0 (Windows NT 5.1; rv:31.0) Gecko/20100101 Thunderbird/31.4.0
Profile Folder: C:\Documents and Settings\Tim\Application Data\Thunderbird\Profiles\dhtmqpol.default
(Local drive)
Application Build ID: 20150109111741
Enabled Plugins: about:plugins
Build Configuration: about:buildconfig
Memory Use: about:memory
Mail and News Accounts
account1:
INCOMING: account1, Tim Corey, (imap) imap.gmail.com:993, SSL, passwordCleartext
OUTGOING: smtp.gmail.com:465, SSL, passwordCleartext, true
account2:
INCOMING: account2, Local Folders, (none) Local Folders, plain, passwordCleartext
Crash Reports
Extensions
Important Modified Preferences
Name: Value
browser.cache.disk.capacity: 358400
browser.cache.disk.smart_size_cached_value: 358400
browser.cache.disk.smart_size.first_run: false
browser.cache.disk.smart_size.use_old_max: false
extensions.lastAppVersion: 31.4.0
gfx.blacklist.direct2d: 3
gfx.blacklist.layers.direct3d10: 3
gfx.blacklist.layers.direct3d10-1: 3
gfx.blacklist.layers.direct3d9: 3
gfx.blacklist.layers.opengl: 3
gfx.blacklist.stagefright: 3
gfx.blacklist.suggested-driver-version: 6.1400.1000.5218
gfx.blacklist.webgl.angle: 3
gfx.blacklist.webgl.msaa: 3
gfx.blacklist.webgl.opengl: 3
mail.openMessageBehavior.version: 1
mailnews.database.global.datastore.id: 7bba5461-432a-473f-a4e4-9a009dfee73
mailnews.database.global.indexer.enabled: false
network.cookie.cookieBehavior: 2
network.cookie.prefsMigrated: true
places.database.lastMaintenance: 1375374210
places.history.expiration.transient_current_max_pages: 78086
plugin.importedState: true
privacy.donottrackheader.enabled: true
Graphics
Adapter Description: Mobile Intel(R) 945 Express Chipset Family
Vendor ID: 0x8086
Device ID: 0x27ae
Adapter RAM: Unknown
Adapter Drivers: igxprd32
Driver Version: 6.14.10.4926
Driver Date: 2-15-2008
WebGL Renderer: Blocked for your graphics driver version. Try updating your graphics driver to version 6.1400.1000.5218 or newer.
GPU Accelerated Windows: 0. Blocked for your graphics driver version. Try updating your graphics driver to version 6.1400.1000.5218 or newer.
AzureCanvasBackend: skia
AzureSkiaAccelerated: 0
AzureFallbackCanvasBackend: cairo
AzureContentBackend: cairo
JavaScript
Incremental GC: 1
Accessibility
Activated: 0
Prevent Accessibility: 0
Library Versions
Expected minimum version
Version in use
NSPR
4.10.6
4.10.6
NSS
3.16.2.3 Basic ECC
3.16.2.3 Basic ECC
NSS Util
3.16.2.3
3.16.2.3
NSS SSL
3.16.2.3 Basic ECC
3.16.2.3 Basic ECC
NSS S/MIME
3.16.2.3 Basic ECC
3.16.2.3 Basic ECC

Thanks for the reply. here is the behavior for all steps:
1. use oper. system safe mode: it works, I can send email
2. no oper. sys. safe mode, t'bird safe mode: cannot send mail
3. no oper. sys safe mode, no t'bird safe mode, all addons disabled: cannot send mail.
It only works when i use oper. sys. safe mode.
Addons for t'bird were enabled in this test.
(Not using T'bird safe mode either in this test.)
Use BitDefender antivirus, which does not have a setting to turn on/off email scanning. Should I contact BD support? (it seems to point to BD as causing the problem. Interesting that I don't have this problem on 2 other desktops, only the laptop. And in the past, T'bird worked on the laptop. I have tried uninstall and reinstall, but mozilla is SAVING all my account and other info, so I cannot do a clean install. it seems to me that if I could do a clean install, it might work. Any idea how to remove all the data and uninstall?
thanks,
tim

My iphone is stuck on the boot screen when i plug it into an outlet but when i unplug it it just turns off and my computer does not recognize it when i try to plug it in itunes

I had my iphone in my pocket when i was at a pool someone pushed me in as a joke but my iphone did not seem to like the water so i instantly put it in a bag rice, It was in there for about 2 days i took it out plugged it in the wall to try to see if it would work... nothing so then a few days later i wake up and my friend plugged in my iphone just to try to see if it would worked and it kinda does work but i cant get it to go past the apple boot screen and the screen its self works and it seems like its charging when i plug it in the wall but it dosent keep a charge. some one please help! and what are my best options?

Make an appointment at the genius bar. Take your credit card. An out of warranty replacement is $229. It's cooked.

My iphone 4s automatically getting turned off (blank black screen) and not getting started until full battery discharge, after updating to ios 8.0.1

My iphone 4s automatically getting turned off (blank black screen) and not getting started until full battery discharge. Even on long pressing power button - screen doesn't showing anything - not even "needs charging logo".
This is happening only since I have updated to new ios version (ios 8.1).
Is there anyone facing similar issue?? Any suggestion?!?

Hi jayla_mora,
Thanks for visiting Apple Support Communities.
It sounds like your iPhone screen is going blank and not responding.
You may find the tips in this article useful for troubleshooting this behavior:
iOS: Not responding or does not turn on - Apple Support
Best Regards,
Jeremy

HT5594 After updating to iOS7 on my iPhone4 I cannot enable location services. How do I enable location services? I have tried turning off restrictions but that did not work.

After updating to iOS7 on my iPhone 4 I cannot enable location services. How do I enable location services? I have tried turning off restrictions but that did not work.

I finally just resolved this after not being able to enable location services since upagrading to iOS 7. Posting the solution here 'cause I couldn't find it anywhere else.
I enabled Restrictions under Settings > General > Restrictions and created a passcode (I'm not sure if this was part of the solution, but it wasn't enabled for me by default.)
In Restrictions, under Privacy, Location Services was set to "Allow Changes" (This still didn't solve the issue of the greyed-out Location Services switch though - I still couldn't turn it on.)
Also in Restrictions, I also switched "Find My Friends" to "Allow Changes"
Once I did step 3, the switch under Settings > Privacy > Location Services was no longer greyed out and could be switched on.
Hope this helps!

When you turn on the ipad2 it does not start up properly. The rotating disk that happens when you turn off the ipad appears after the apple logo comes up

When you turn on the ipad2 it does not start up properly. The rotating disk that happens when you turn off the ipad appears after the apple logo comes up during start-up and stays there for ten minutes. Then, the ipad will start up properly.

Have you tried a reset ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

All of a sudden.. My BB began to feel overheated, turn it off and now it does not turn on, even does not charge

All of a sudden.. My BB began to feel overheated, turn it off and now it does not turn on, I remove the battery because it felt hot.. I changed it by a new one.. began to flash.Few seconds later.. once again began to feel overheated and shut it down itself... Now.. Its dead =( I only have 8 months with the BB and now is Broke??? Its frustrated... I lost my information..
Have you ever experience this? What can I do?
Thanks

Not much I'm afraid but when mine overheats and won't charge I put it in the fridge for a minute to cool down then try and recharge. Doesn't always work though. Can't wait for contract to expire and change for something better.

I went to update my ipad 2 and the screen turned black and now it does not turn on what do i do

I WENT TO UPDATE MY IPAD 2 AND THE SCREEN TURNED BLACK AND NOW IT DOES NOT TURN ON, PLEASE HELP!!

THANK YOU FOR THE SIDE BAR SOLUTIONS, ITS WORKING AGAIN !!

HT201559 I have tried to reset and restart my iPod touch but it remains stuck at the apple logo and turns off. The iPod is not responsive when i connect it to my computer or wall charger.

I have tried to reset and restart my iPod touch but it remains stuck at the apple logo and turns off. The iPod is not responsive when i connect it to my computer or wall charger.

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

My computer has been acting weird lately. Shuts itself off, the mouse goes off in all angles, does not go into sleep mode sometimes and instead shows on a gray screen definitions of words in 3" letters! Do I have a virus?

My computer has been acting weird lately. Shuts itself off, the mouse goes off in all directions, does not go into sleep mode sometimes, instead shows a gray screen with word definitions in large 3" letters that continuosly flows across the screen. Do I have a virus?

Doesn't really sound like a virus.
See if the Disk is issuing any S.M.A.R.T errors in Disk Utility...
http://support.apple.com/kb/PH7029
How many of these you can answer...
Open Activity Monitor in Applications>Utilities, select All Processes & sort on CPU%, any indications there?
How much RAM & free space do you have also, click on the Memory & Disk Usage Tabs.
Open Console in Utilities & see if there are any clues or repeating messages when this happens.
In the Memory tab, are there a lot of Pageouts?

I recently restored my iPhone 4s from back-up after being reset. An app that I had turned off in back-up did not show up in my recent resoration. I forgot to turn that app back on. Would there be any way I would be able to get the data from that app?

I recently restored my iPhone 4s from back-up after being reset. An app that I had turned off in back-up did not show up in my recent resoration. I forgot to turn the app back on. Would there be any way I would be able to get the data from that app onto my phone? Is it possible to put an old back-up on my phone?

LukaPetranovic wrote:
Hello anita4323.
I hope this will help you with your problem:
Back up and restore your iPhone, iPad, or iPod touch using iCloud or iTunes - Apple Support
You can restore your backup whenever you want from iTunes or iCloud, depending where you made it.
Let us know if you succeeded or need any further help.
I believe you are missing the point. The OP has already restored from back up, but failed to include a specific app in the back up and is trying to recover data for it, which in this case is not possible.

SCSFileDownloadServlet fails: User 'guest' does not have sufficient priv.

Hi,
We have an ADF application that is using SCSFileDownloadServlet to get documents from UCM. We added the servlet in web.xml and we are using this link to download the documents: /getfile?adapterName=our_adapter_name&dDocName=document12345&dID=12345
The issue is that sometimes it works but sometimes it fails throwing this message in the logs:
Event generated by user 'guest' at host 'CIS'. Unable to download 'COR-ER-421722'. User 'guest' does not have sufficient privileges. [ Details ]
An error has occurred. The stack trace below shows more information.
!csUserEventMessage,guest,CIS!$!csUnableToDownload,COR-ER-421722!csUserInsufficientAccess,guest
intradoc.common.ServiceException: !csUnableToDownload,COR-ER-421722!csUserInsufficientAccess,guest
*ScriptStack GET_FILE
3:checkSecurity,dID=421317,dDocName=COR-ER-421722
at intradoc.server.ServiceRequestImplementor.buildServiceException(ServiceRequestImplementor.java:2115)
at intradoc.server.Service.buildServiceException(Service.java:2260)
at intradoc.server.Service.createServiceExceptionEx(Service.java:2254)
at intradoc.server.ServiceSecurityImplementor.validateSecurityPrivilegeLevel(ServiceSecurityImplementor.java:813)
at intradoc.server.DocumentAccessSecurity.checkSecurity(DocumentAccessSecurity.java:170)
at intradoc.server.DocumentAccessSecurity.checkSecurity(DocumentAccessSecurity.java:121)
at intradoc.server.ServiceSecurityImplementor.checkSecurity(ServiceSecurityImplementor.java:371)
at intradoc.server.Service.checkSecurity(Service.java:2829)
at intradoc.server.FileService.checkSecurity(FileService.java:337)
at intradoc.server.Service.checkSecurity(Service.java:2807)
at sun.reflect.GeneratedMethodAccessor456.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
Is it possible to set a user/password to this servlet so it is able to download the documents everytime?
Thanks,
Josue

Hi go9189,
According to your description, you come across the error that User 'guest' does not have permission to run DBCC checkprimaryfile. This issue could happen when the login account doesn't have CREATE DATABASE, CREATE ANY DATABASE,
or ALTER ANY DATABASE permission in SQL Server instance, or that the login account has no access to the mdf and ldf files when attaching database, so SQL Server recognize the login account as a "Guest".
To solve the issue, you could pay attention to the points below.
1. Ensure that the login account has at least CREATE DATABASE, CREATE ANY DATABASE, or ALTER ANY DATABASE permission. You could grant the fixed server role 'dbcreator' or 'sysadmin' to the login account following the steps below.
a. Connect to SQL Server instance with the login account which has sysadmin fix server role.
b. Expand the folder 'Security', right click the login, and select Properties.
c. In the Server Roles tab, check the checkbox for 'dbcreator' or 'sysadmin'.
2. Make sure that the the login account has full control permission on the mdf and ldf files. For how to grant the login account with full control permission on the mdf and ldf files, please refer to the steps in the following article:
http://msdn.microsoft.com/en-us/library/bb727008.aspx
There is a similar thread for your reference:
https://social.technet.microsoft.com/Forums/en-US/e463df4c-8d26-46cf-aa2e-bddd97c7a9b8/user-guest-does-not-have-permission-to-run-dbcc-checkprimaryfile?forum=sqlgetstarted
Regards,
Michelle Li

My iPad will stay on for minute or so, then will restart. I have tried to restore, but it says I must have "Find My iPad" turned off. The iPad will not allow me to turn that off, so I am at quite the impasse.

My iPad will stay on for minute or so, then will restart. I have tried to restore, but it says I must have "Find My iPad" turned off. The iPad will not allow me to turn that off, so I am at quite the impasse. Any help?

Answer to this question: https://discussions.apple.com/message/22350503#22350503

When I turn my iPod the screen does not turn with it :(

When I turn my iPod the screen does not turn with it >:(

Try here:
iOS: Not responding or does not turn on

Turning off VM in guest does not update status in VMM 2012 R2 Update Rollup 2 console

Similar Messages

Maybe you are looking for