Turning off your computer when iPod touch is connected

Whenever I sleep or turn off my computer while my iPod is asleep the iPod turns on. I don't know why but it just does.

What is happening is no different than when you unplug your iPod from the computer - you wake it up.
BTW, do not leave your iPod plugged into your computer when it is in sleep mode or turned off. You can drain the iPod's battery. The only exception might be if you left it plugged into a powered hub.

Similar Messages

  • My ipod nano 6 keeps turning off the music when i touch the sleep button

    Hi my Ipod nano 6th keeps turning off the music when I touch the sleep/wake button.
    What should I do?

    Your problem is that your iPod is not sensing that your headset is inserted. There is a pin inside the headphone port on the Nano that senses if it is inserted fully. If it does not sense anything, it will pause playback when the screen turns off to save battery power. Here are the solutions:
    Insert it fully. This will fix it for most of you. Press that thing in there all the way. You should feel and hear a full click when it is fully seated. If you can see ANY silver of the headset jack, it is not fully inserted.
    Debris inside the headset port. If you are totally unable to push the headset jack all the way, the most likely problem is that you have crud inside your headphone jack. Try blowing it out or slapping it against your palm with the headset port facing your palm to try and get the stuff out. If you look into he jack with a light, you should be able to see to the bottom. The entire inside of the headset port is white, so if it looks dark at the bottom, that is the crud that is keeping your nano from working.
    Headset jack or plug issue. If you cannot solve the problem with 1 or 2, then there is likely something physically wrong with either the headset jack on your headphones or the headset port on the nano.
    i

  • Is it best to turn off your computer or put it in sleep mode.

    Is it best to turn off your computer or put it in sleep mode.
    I have a MAC Book Pro
    2.4 GHz Intel Core 2 Duo

    Well. Apple recommends to put the Mac into sleep mode if you are going to use your Mac after a short period of time, and they only recommend to turn it off when you are not going to use the computer for several days.
    In sleep mode, your Mac consumes only a small battery capacity, so it's worth to put it in sleep mode. Also, it's much faster than turning the computer on every time you want to use the Mac

  • Stuck in an update loop, 3 of 3, do not turn off your computer

    Hello,
    We have all the updates ,update automatically.  During this last one, today, our server has shut down and is in a constant loop.  We are getting that the drives are both fine, but there is one error on the start up that has me concerned:
    BMC System Error {SEL} Full
    The system goes through "Configuring updates" Stage 3 0f 3, do not shut down, then on to a blank screen, then restarts on its own, goes through the whole start up, everything looks good except for that BMC error, than the microsoft is loading...and
    right back into "Configuring updates", blank screen - its been on a continuous loop for about a half hour now.
    Suggestions?  The computer does not stay on long enough to do anything, and it never actually gets to a start menu..
    Thanks,
    Kelly Campbell

    Hi,
    Before going further, would you please let me know the version of operation system that you use?
    Meanwhile, please refer to resolution steps in the following KB. Then check if can troubleshoot and solve your issue.
    "Failure configuring Windows updates. Reverting changes. Do not turn off your computer" error when you try to install Windows updates
    http://support.microsoft.com/kb/949358/en-us
    Regarding to the error message, should the complete information of this error be “02A2: BMC System Error Log (SEL) Full.”? If so, please refer to the following article
    and check if can solve this error.
    02A2: BMC System Error Log (SEL) Full.
    http://clintboessen.blogspot.in/2013/05/02a2-bmc-system-error-log-sel-full.html
    If I misunderstand, please don’t hesitate to let me know.
    Hope this helps.
    Best regards,
    Justin Gu

  • How can I turn off my computer when I push de STOP button from de program?

    How can I turn off my computer when I push de STOP button from de program?

    You might also want to have a look at the old winutil>Windows API Function Utilities (32-bit) for LabVIEW. While they are written in LabVIEW 4.0 (!), they still seem to work fine under W2000 and LabVIEW 7.0. In particular, have a look at "exit windows.vi" inside "winevent.llb" of the above link. It calls the function "ExitWindowsEx" of user32.dll. Since this is part of the OS, you don't need to include extra DLLs.
    (All the above assumes Windows OS. I don't know how to shutdown the OS on e.g. MAC or linux.)
    LabVIEW Champion . Do more with less code and in less time .

  • Should I turn off my computer when I go om vacation?

    should I turn off my desktop when I go on vacation, in the event ther is a thunderstorm?

    Yes, turn it off.  I also agree that computers should be turned off when you are "done" for the day.  I have aquantainces that do not ever turn them off.  Their computers never seem to last a long.  My last computer at the office lasted over six years and was fine until space on the HD and memory became an issue.  My last Home Computer was almost a teenager before it was replaced.  If fact I just recently gave away my old Packard-Bell computer (Windows 95) and it still worked!  I do still have my Heath-Zenith (Cost $ 3000.00 new! With Zenith-DOS.)  -Have a good vacation! 

  • HOW DO I TURN OFF REPEAT ON MY IPOD TOUCH

    How do I turn off repeat on my ipod touch

    Go to the music playing screen. On the left-hand side of the screen, right below the scrubber bar is an arrowed racetrack icon. That control Repeat. Tap the icon until it is white to turn it off.

  • ITunes crashing (only when iPod Touch is connected)

    It just started last night. Anytime I try to add music to the library or choose the folder to sync photos from, basically anytime iTunes has to access explorer to browse folder, it crashes and it doesn't give me any sort of error. It just tells me it has crashed and is reporting the problem. Like I said though, this only happens when the iPod Touch is connected. If I unplug it and then add music, it works fine but without it plugged in I can't add photos. Also, if I already have iTunes open and then connect the iPod, it crashes. I have to have the iPod already connected and then I can open iTunes.
    Any ideas? I switched to using iTunes as my default player because WMP had too many issues. I don't want to have to go back.
    OS: Windows 7 Ultimate
    iPod: 32GB iPod Touch 3rd generation on latest official firmware

    More info: iTunes generates a standard WinXP Send Error Report/Don't Send error message.
    The Error Signature is:
    AppName: itunes.exe
    AppVer: 8.0.2.20
    ModName: quicktime.qts
    ModVer: 7.55.90.70
    Offset: 009fd1a7
    I tried on another PC. Same crash. It seems either the problem is on the iPod Touch side, or some more general problem with iTunes.

  • PC shuts off when Ipod Touch is connected.  Detects "Digital Still Camera"

    My Ipod Touch was working fine until today. I plugged it into my PC and then it detects it as a "digital still camera". Then after a few seconds my PC will completely shut down.
    The weird thing is that once it restarts with the Ipod connected already it will detect it as an Ipod and Itunes will open and everything normally. If I then disconnect it and connect it again, it will be detected as a camera again and again shut down.
    I've looked all over the inter for solutions. Most of them involve updating the driver. But I cannot update the driver unless the device is connected. And when the device is connected as a "digital still camera" it will shut down my computer.
    I tried booting in safe mode and then connecting the Ipod Touch and it worked fine. It detected it as an Ipod and everything worked fine. My plan was to boot in safe mode and then update the driver but I couldn't because it detected it normally.
    I would normally try turning off some services to see if something it bothering it but I don't want to ruin my computer by consistently shutting it down unexpectingly and giving me errors each time it reboots.
    I've seen other people online with this problem but none with a solution. I would really appreciate some help. Thank you

    Mine is doing the same thing,I got it 2 days ago worked fine but today everytime i plug in the desk top it will shut it down. I plug it to my lap top it worked but i'm affraid that it will do the same thing again after a while. I have a feeling that there is some problem with itunes, if my computer is the problem why did it work fine at the begining.When I uninstalled the itunes and plug the ipod it starts charging but the computer did not shut down. I did some research and it seems that a lot of people having the same problem.

  • How do i turn off icloud on my ipod touch?

    how do I turn off the icloud off on my ipod touch Idon't want my music and movies and tv shows to go directly to icloud right when they download, and now i cant seem to download my content that I paid for back to my ipod touch. just tell me how to turn off the icoud feature on my ipod touch so I can redownload the content i paid for?
        icloud was a terrible idea!

    i didnt choose for it to happen to me it must have happened to me when i downloaded itunes on my pc. should i delet itunes on my home computer to solve my problem if so i will to get my downloads to go directly to my ipod touch.

  • TS2755 Turning off Imessage on an ipod touch

    I bought my daughter an ipod touch and set her up on my apple account. I get a copy of all her texts.  Someone told me to turn off the IMessage on her ipod, but when i did her text didnt work at all.  It just asks me to turn it back on.  Is there a way she can text without IMessage?

    See the following so she can still message with the Messages app without you getting her messages
    MacMost Now 653: Setting Up Multiple iOS Devices For Messages and FaceTime

  • How can i turn off the SSL on ipod touch 4

    How can I turn off the SSL on mu ipod touch 4th g

    Are you talking about an SSL connection to a Mail server?
    If so, go to Settings > Mail, Contacts, Calendars and touch your Mail account name. Scroll the dialog box that appears for your account up and touch the Advanced button. Turn "Use SSL" OFF

  • My turn off button on the ipod touch is stuck!

    I wanted to turn off my ipod.
    and then i pressed the button on the top right which usually always works but the button is stuck and wen i press it it deosnt close!
    wat do i do? is there anyway 2 get it back 2 normal?
    URGENT HELP!!!
    PLEASE GIVE ME ADVICE ASAP!!!
    THX

    See the previous discussions on the right side of this page under the heading "More Like This." The green checkmark indicates solved.

  • I tried to turn off VoiceOver with my iPod touch

    I tried to turn off voice over with my iPod by plugging it in to my Mac but it says that because there is a passcode on there I cannot get in to my iPod and I will not wipe it out. What do I do?!?? I cannot get VoiceOver off

    Hi,
         If you wish to have voice over off then follow these directions.
    Directions:
    1. Go to settings
    2. Go to general
    3. Scroll down and go to accessibility.
    4. The first thing should give you the option to enable or disable VO
           Simple!!!!!!!   

  • Can I turn off Application update on iPod Touch?

    I received an update reminder yesterday for 'Battery Magic Pro' and downloaded it onto my iPod Touch. It would not launch. It just returned me to the applications list screen. Others have had the same issue with the 4.1 update and posted the problem on the App Store. I deleted the application and then installed the older version from my iTunes library. However, the App Store icon on my iPod Touch still shows a '1' indicating that an application update is available. How can I get rid of that message? There seems to be no way to tell the iPhone software to ignore an update.
    Thanks in advance

    I was afraid of that! Thank you for confirming.

Maybe you are looking for

  • Error in sender file adapter: source directory does not exist

    Hi, The PI system is 7.11 I've created sender file adapter with following details: Transport Protocol : File System Source directory: /interfaces/In I checked in AL11 that this path really exists and it does. (I can even see the .txt file that should

  • S_CTS_ADMI Authorization issue

    Hi Experts, Every now and again a user sends me a SU53 with the error requesting access to S_CTS_ADMI field TABL. The user of this morning is trying to release a purchase order using transaction ME29N. Why would the SU53 indicate that the user want t

  • Snippets Not Appearing Correctly

    When I insert a snippet, it does not appear in line with the paragraph text. Instead, the snippet is inserted below the paragraph. Is this the expected behavior? If not, how do I correct it?

  • Lightroom 3 publish service: Sending 3 files from one photo

    Hi, I have created a lightroom 3 publish service that will export each photo as a huge TIFF file over a slow broadband connection to an external server. The external server creates 3 compressed JPEG files from the TIFF file. I think this is too slow

  • Using Photoshop With Aperture-Flattens Layers

    I am running into some slight issues when using Aperture 3 and Photoshop CS6. I have used Aperture 3 for quite some time. As part of my workflow, I use Nik Software plug-ins for quite some time. In order to fully understand the issue, it would be bes