Turning on the backlight with backlight timer off
With the backlight timer set on off, there is a feature to turn on the backlight by holding the menu button. I remember doing that a while ago, but my ipod no longer does that anymore. Now with the backlight timer off, and i hold the menu button it no longer does that (it just goes to the main screen). I've tried reseting the ipod, but the feature does not come back.
The only way I can think of to get the feature back is to "update" using an older updater, such as the one that came with your CD.
Reinstall the updater from the CD that came with your iPod would give you an older update that would contain the feature your looking for. Also using the "previous updaters" feature in the iPod folder on your computer would have the same effect. Update the iPod with one of these. However, bear in mind that newer features such as the volume limiter that are on the new 1.1.1 update would not be available.
Similar Messages
-
My iphone 5 died so I plugged it back in to charge and it will not turn on. It will turn to the screen with the apple logo and black screen then turn off again. Any suggestions?
I leave it charging until it gets back to full, usually it turns on after a little bit of time after plugging it in, but all its doing is going to the apple logo screen and going blank again.
-
I have bought a WD My Book World Edition to use for back-up of my iMac, but when I try and log onto the drive with Apple time Machine (back-up software) or connect in any other way I get the message 'There was a problem connecting to the server "MybookWorld.local" The version of the server you are trying to connect to is not supported. Please contact your system administrator to resolve the problem'
It is a brand new iMac and running Lion OSX
Any ideas on how to solve would be gratefully received?Followed the directions on this page and it worked!
http://forums.macrumors.com/showthread.php?t=1102423
Part One - Turn on SSH (in the admin panel)
[1] Go to to http://mybookworld.local
[2] login: username will be admin, password will be whatever you have setup. If you can't remember it should be in your Mac OS X keychain (Utilities > Keychain Access, search for "mybookworld"). If you have not changed if from the default the password will be admin as well.
[3] Switch to advanced mode.
[4] From the System tab, pick Advanced.
[5] Enable SSH Access, and click submit.
[6] Click on the network tab and then the LAN button
[7] Make a note of the IP address
Small, maybe obvious, but nevertheless important point: For the install to work, your NAS needs to be connected to a router with internet access.
Part Two - Install netatalk2.2
[8] Open Terminal.app (Utilities > Terminal)
[9] Enter the following command (substitute in 127.0.0.1 for the actual IP address you noted down in step 7), then hit return:
Code:
ssh [email protected]
[10] When prompted, enter the ssh password (will be welc0me).
[11] You are now going to download the installer. Enter the following command, then hit return:
Code:
wget http://mybookworld.wikidot.com/local--files/netatalk2-2-on-whitelight/install_netatalk.sh -O install_netatalk.sh
[12] Once completed, you will need to run the installer. Type:
Code:
sh install_netatalk.sh
[13] You will be asked a number of question during install, answer yes to all. When asked about the "DHX2 login process", I opted to install the modified version, so I can confirm it works.
[14] Once the box has restarted, you should be able to connect to your afp shares and continue to use Time Machine. -
Recently updated the the apple tv remote app for my iPhone4. Now can no longer turn on the apple tv "box" on/off using iPhone app as I used to do before the update. Only thing that shows on iPhone screen is music library. Home Sharing is on. Any help appreciated. Sorry if this is not exactly the right place to post this!
One clue: I have found a reliable way to solve the problem when it happens.
In my network, I have the main Airport Extreme (Gen 1) which is connected to my router, which distributes IP addresses to my internal subnet. The other two AEs (one Gen 4, one Gen 5) are set to extend the network.
When I get this problem with an AppleTV 2 that can "see" my library, but when I try to open it, it says it couldn't find the library, it seems to have to do with a change in which Airport Extreme it's talking to.
If I restart the main Airport Extreme from the Airport Utility, effectively restarting the entire wireless network, then when the network resumes, every AppleTV 2 is happy again.
Unfortuntely, the problem does seem to recur - but I'm wondering if it's because temporary interference leads an AppleTV 2 to try to connect to a different AE, and somehow that's mucking with the Home Sharing. Remember, internet access (Trailers, Store, Netflix) have no issues. Purely Home Sharing.
Adam -
why my iPod (6th generation)not appearing in iTunes and all my songs are gone but the data is the same with last time when got songs.
I understand that your iPod nano is not recognized in iTunes. The following troubleshooting assistant may provide a resolution:
Apple - Support - iPod nano (6th generation) - iTunes Troubleshooting Assistant
http://www.apple.com/support/ipodnano/6th_generation/assistant/itunes/
If the above did not resolve your issue, choose an applicable article below that best describes your issue.
Windows
iPod appears in Windows but not in iTunes
iPod not recognized in 'My Computer' and in iTunes for Windows
iTunes reports that "iTunes cannot recognize this iPod at this time"
Mac OS X
iPod not recognized in iTunes and Mac Desktop
MacBook and MacBook Air: iPod won't mount when connected via USB hub
What to do if your computer won't recognize a USB or FireWire device
Thanks,
Matt M. -
Output triggred in the invoice with Date/Time 1
Output triggred in the invoice with Date/Time as 1 i e Send with periodically scheduled job.
So could you let me know when this gets triggeed if we maintain 1 in condition record?
Thanks,
PraveenHi Praveen,
When you maintain 1in the Date/Time column in the Condition Records for O/P of say the Invoice it means that you are telling the system to send the O/P with periodically scheduled job.
To achieve this you must use the report program RSNAST00.The message is processed through report program RSNAST00. This report program can be scheduled periodically or started manually.
For scheduling periodically you need to set up a batch process in SM35.
Hope this helps,
J Nagesh -
My iphone 5 screen broke, can i take it to the apple store and get a new one for free if i turn in the one with the broken screen? can someone help me?
iPhone model
Out-of-Warranty Service
iPhone 5
$269
iPhone 4S
$199
iPhone 4, iPhone 3GS,
iPhone 3G, Original iPhone
$149 -
FCPX10.1.1 does not solve the problem with long-time clip editing!
OS: clean installed mac os10.9.1
FCPX: FCPX10.1.1
Project: 4clips, all of the clips is about 1 hour long (dvcprohd)
Disk: 900MB/S++
machine specs:
2*3.06Ghz 6-core
24GB DDR3
and I've tried these graphic cards:
K5000
and
2 5770
all get the same results:
If I double press the "L" key, the response of FCPX is too slow
If I do other operation like browse the clip, or import long time clip,
the FCPX will become too slow to browse the timeline.
I've found the FCPX like to generate audio waves of the clip and
there's no option to shutdown this! I've tried all the options in FCPX like
do not show the waveform of audio in preference and close the audio waveform in timeline
I don't think I can work the project with 10.1.x.
the 10.0.9 also has the 1st problem, but don't have the 2nd problem.
Another project: 2000++ 4K 50P clips(XAVC), but on FCPX 10.0.9, all of the clips is less than 40mins, always 20seconds.
though it will get slower when we import clips day after day,
it's much more smoother than 10.1.1!!!!!!
so,
I don't think we should update to 10.1.x for the little promotion of performance.
and 10.1.x also do not support nvidia K5000 card.
the render is slower than ait5700.....
I hope apple can solve the problem,
all of the above is just basic editing needs!
if the fcpx can not do even a long-time clip editing
why should I use it?2 project:
1. 4*1 hour clips dvcprohd
that's the problem! I can not bear it.
2. 2000++clips 4K XAVC 50P project which I don't run on FCPX 10.1.1
I run it in fcpx10.0.9, it's fine, but slower when I imported more and more clips.
until now I can bear it.
the fcpx10.1.1 editing long-time clip has problem:
1.
it use 150MB/s harddisk speed to generate the waveform.
I have 900MB/s disk speed, so that's not the problem,
but it generate all the time!
1 hour clip's wavefrom generates for 1 hour without stopping, if I stop it , the fcpx crashed!
2.
when I skimming the clip for editing, the fcpx gets slower, always 2mins to response my operation.
3.
when I double press J or L key, the fcpx will need about 1 min to response.
the FCPX10.0.9 editing long-time clip problem:
the fcpx10.0.9 can handle the long-time clips, but also has very slow response when I doulbe press J or L key. -
i want to store the number of records in a file. Every time when ever i run the program the record will be incremented well i using forloop with count value 1 as a constant .in the for loop i am using autoincrement with the feedback node . to view the number i have attached the indicatator .the number will be increment every time . i am using number to time time stamp that is connected to get date/time string. from that we can view the date string and time string . so , my issue is when ever i close the code again it is coming with intial value . i should get from that number only where ever i close the code . after the date completed again it should come from intial value . i am attaching the code so that u guys can solve my problem.
Attachments:
record.doc 34 KBhere you can see.......the file path in case structure in that i have included my requirement of increment the number
-> if the case is true then it goes in ok file path and the no of records string will pass in the file by seeing these code u will get the clarity
my requirement is the number of records should increase ........ whnever the program runs...that i made it. by the next day again it should begain with the intial value.........that is my requirement. i hope u understand .
suggest me how can i use the intial value .......
Attachments:
code.vi 35 KB -
Process the output with dispatch time 3
Dear experts!
Thank you for your attention!
I ues output type BA00 to print order confirmation and set the dispatch time 3
after i save the order, where can i process the output?
as in delivery output, we can use VL71 to process outbound delivery.
which t-code could i use to process the order output with dispatch time 3 ???
Best regard!
Tangdarkis there anyone can help???
please~~~ -
Turning menu bar on with title bar off
I love how the title bar is gone from Firefox 4 and when I press ALT I can get the menu bar up next to the FIREFOX drop-down
I want to turn the menu bar on permanently, but as soon as I do the title bar comes back and the Firefox drop-down goes away (taking up more real estate).
How can I turn on the menu bar but keep the title bar off and the Firefox drop-down on?You can't. You can either see the menu bar or the orange Firefox button.<br />
You can however customize the Firefox button or place extra items on the title bar.
* New Old Menu: https://addons.mozilla.org/firefox/addon/new-old-menu/
* Personal Titlebar: https://addons.mozilla.org/firefox/addon/personal-titlebar/
* Personal Menu (Personal Firefox Button): https://addons.mozilla.org/firefox/addon/personal-menu/ -
Weak Connection to the Internet with My Time Warner Router
Strangely enough, I cannot connect my palm Pixie to the internet via our Time Warnar Turbo Router when I am not in the same room as my router; whereas my sister's iphone 4 gets connected in any room in our house. Has it something to do with Palm or the Window's platform. I should mention that I have similar problems with my Toshiba laptop running on Windows 7.
Post relates to: HP TouchPad (WiFi)A couple things you can try.
1. Google "how to boost wifi" and check youtube as well as Wiki-how-to.
It amazed me to find FREE and SIMPLE home made ways to boost your routers signal (and it works).
Also, you may need to just move the position of your router/its antennas.
Also, other wireless devices (and microwave ovens ...... Basically anything electronic with emissions) near or between your router and palm/laptop/phone (whatever) can greatly affect signal strength (as well as give you a mental jolt of reality about how many wireless and other emissions we live with every day)
Finally (actually there are tons more suggestions from a simple Google search ......
freeantennas.com has a "template" which you can print out, trace on stiff paper and make a virtually free antenna booster (plus a little glue and tinfoil)
For the very lazy (I found out) a curved piece of cardboard (covered in tin foil even better) behind your router's antenna directing the signal in the direction of you device can DOUBLE the signal strength (I was amazed as a klutzy non-techie with lazy tendencies) -
Why is my iTunes volume turned all the way down every time I launch the program?
Everytime I launch iTunes I get a warning and my iTunes volume is volume is turned all the way down. How do I fix this?
This worked for me:
Close iTunes
Open Finder and navigateto: Users>YourAccountName>Library>Preferences>com.apple.iTunes.plist
Move that file to the desktop
Launch iTunes (which will create a new prefs file)
If the problem is now fixed, move that prefs file from the desktop to the Trash. There might be some personal settings in iTunes you will need to re-do. -
I just turned on my Apple Macbook pro. Whenever, I turn it on, the progress bar comes with the Apple symbol and after few secs, it turns off by itself. Safe mode on start up does not work either...any ideas?
i tried it with both. i have since tried control+R, (https://discussions.apple.com/thread/3730727?start=0&tstart=0) which appears to be doing something but wont let me repair anything..
-
When is Apple going to fix the problem with slow Time Machine backups with Mavericks?
I have been with Apple tech support and they got my Time Machine working by doing a spotlight re-indexing and a safe boot. This worked for about three days and I am back to very slow backups. It is impossible for Time Machine to back up every hour when it takes six hours to do the back up. I don't want to take hours to re-index with spotlight all the time. I think taking six hours to do an incremental backup is a bit much. I see that there are many people that have this trouble and it all started with an upgrade to Mavericks. The question is when is Apple going to fix this problem of slow backups with Time Machine for Mavericks. I have wasted more time than I care to. I am think of going back to Windows. I need good solid backups of my machine and Apple has taken it away with the new Mavericks. Oh, I am using the UBS 3.0 connection so the drive should not be the problem. Also this has occurred in about the last five months, so I am not sure this problem was in the original Marvericks.
Allen Thanks for your reply. All I can say is several months ago Time Machine quit working in a reasonable manner. Right now I have a Time Machine backup that has been running all night and still has three hours to go to backup 6 GB of data. I am using a OWC 1.5 TB drive connected directly to my MacBook with a USB 3.0 connection. In the resent past I have added Dropbox, GoogleDrive and a MAMP server on which I am using a program called Learning With Text from Sourceforge. There have been a lot of questions on the forum about people having very slow Time Machine back ups, so it appears to be a general problem. I should also state I am getting this very slow backup after doing the Spotlight re-indexing and the Safe Restart procedure that was told to me by apple support. I have a 750 GB drive in my MacBook Pro which I am constantly trying to keep at a 5% level of free space. This might be a problem also. However, I am working on a lot of things and like to have a lot of things on my drive. Also the heavily loaded drive has not be a problem in the past. This slow backup business started about three months ago, so something has happen in a very short time period. Now it seems even the procedure that Apple support gave me is not working. Currently I am in China and it is difficult to interact with Apple support to solve this problem, but because I am in China having my computer backed up is critical. I have run the EtreCheck and am attaching the results below. I would appreciate any suggestions. If necessary I will clear out more of my hard drive if that appears to be a solution. The Time Machine drive was recently reformed so I only have a few backups on it. I also don't run the Time Machine all the time as I don't want multi-hour backups running all the time. I run it every few days.
Here is the info from EtreCheck:
Hardware Information:
MacBook Pro (15-inch, Mid 2012)
MacBook Pro - model: MacBookPro9,1
1 2.6 GHz Intel Core i7 CPU: 4 cores
8 GB RAM
Video Information:
Intel HD Graphics 4000 - VRAM: 1024 MB
NVIDIA GeForce GT 650M - VRAM: 1024 MB
System Software:
OS X 10.9.2 (13C1021) - Uptime: 0 days 10:18:59
Disk Information:
APPLE HDD HTS727575A9E362 disk0 : (750.16 GB)
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) / [Startup]: 749.3 GB (54.06 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
HL-DT-ST DVDRW GS31N
USB Information:
VIA Labs, Inc. USB3.0 Hub
OWC Elite Pro mini C 1.5 TB
EFI (disk1s1) <not mounted>: 209.7 MB
NewMBP-TimeMachine-1.1 (disk1s2) /Volumes/NewMBP-TimeMachine-1.1: 1.5 TB (691.6 GB free)
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Computer, Inc. IR Receiver
Apple Inc. Apple Internal Keyboard / Trackpad
Logitech USB Receiver
Thunderbolt Information:
Apple Inc. thunderbolt_bus
Gatekeeper:
Mac App Store and identified developers
Kernel Extensions:
[not loaded] com.LaCie.ScsiType00 (1.2.2) Support
[not loaded] com.lacie.driver.LaCie_RemoteComms (1.0.1) Support
[not loaded] com.oxsemi.driver.OxsemiDeviceType00 (1.28.0) Support
[not loaded] com.roxio.BluRaySupport (1.1.6) Support
[not loaded] com.roxio.TDIXController (2.0) Support
[not loaded] com.seagate.driver.PowSecDriverCore (5.0.1) Support
[not loaded] com.seagate.driver.PowSecLeafDriver_10_4 (5.0.1) Support
[not loaded] com.seagate.driver.PowSecLeafDriver_10_5 (5.0.1) Support
[not loaded] com.seagate.driver.SeagateDriveIcons (5.0.1) Support
[kext loaded] com.symantec.kext.SymAPComm (11.2.2f3) Support
[not loaded] com.symantec.kext.confidentialData (1.4f5) Support
[not loaded] com.symantec.kext.filesecurity (1.4.3f19) Support
[kext loaded] com.symantec.kext.fw (1.0.3f5) Support
[kext loaded] com.symantec.kext.internetSecurity (1.3.2f5) Support
[kext loaded] com.symantec.kext.ips (1.3.1f7) Support
[kext loaded] com.symantec.kext.pf (4.2.1f7) Support
[not loaded] com.wacom.driver.HIDTablet (5.0.1) Support
Startup Items:
cma: Path: /Library/StartupItems/cma
MySQLCOM: Path: /Library/StartupItems/MySQLCOM
ParallelsDesktopTransporter: Path: /Library/StartupItems/ParallelsDesktopTransporter
ParallelsTransporter: Path: /Library/StartupItems/ParallelsTransporter
Tablet: Path: /Library/StartupItems/Tablet
Launch Daemons:
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.adobe.versioncueCS4.plist Support
[loaded] com.barebones.authd.plist Support
[not loaded] com.barebones.textwrangler.plist Support
[loaded] com.bombich.ccc.plist Support
[loaded] com.mcafee.virusscan.eupdate.plist Support
[running] com.micromat.TechToolProDaemon.plist Support
[loaded] com.oracle.java.Helper-Tool.plist Support
[loaded] com.oracle.java.JavaUpdateHelper.plist Support
[loaded] com.prosofteng.DriveGenius.locum.plist Support
[running] com.symantec.avscandaemon.plist Support
[running] com.symantec.deepsight-extractor.plist Support
[running] com.symantec.diskMountNotify.plist Support
[loaded] com.symantec.MissedTasks.plist Support
[loaded] com.symantec.navapd.plist Support
[running] com.symantec.navapdaemonsl.plist Support
[loaded] com.symantec.Sched501-1.plist Support
[loaded] com.symantec.Sched501-2.plist Support
[loaded] com.symantec.Sched503-3.plist Support
[loaded] com.symantec.Sched503-4.plist Support
[running] com.symantec.sharedsettings.plist Support
[running] com.symantec.symdaemon.plist Support
[running] com.symantec.symSchedDaemon.plist Support
[loaded] org.macosforge.xquartz.privileged_startx.plist Support
Launch Agents:
[loaded] com.adobe.CS4ServiceManager.plist Support
[running] com.lacie.safemanager.daemon.plist Support
[running] com.micromat.TechToolProAgent.plist Support
[loaded] com.oracle.java.Java-Updater.plist Support
[running] com.seagate.SeagateStorageGauge.plist Support
[failed] com.sogou.SogouServices.plist Support
[running] com.symantec.uiagent.application.plist Support
[running] net.culater.SIMBL.Agent.plist Support
[loaded] org.macosforge.xquartz.startx.plist Support
User Launch Agents:
[loaded] com.adobe.ARM.[...].plist Support
[loaded] com.adobe.ARM.[...].plist Support
[loaded] com.google.keystone.agent.plist Support
[running] com.wondershare.mobilegodaemon.plist Support
User Login Items:
GeekTool
SIMBL Agent
QQ
Safari
Calendar
Google Drive
Dropbox
Day One
Dictionary
SymSecondaryLaunch
Internet Plug-ins:
Flip4Mac WMV Plugin: Version: 2.2.1.11 Support
FlashPlayer-10.6: Version: 13.0.0.182 - SDK 10.6 Support
iPhotoPhotocast: Version: 7.0
Flash Player: Version: 13.0.0.182 - SDK 10.6 Outdated! Update
AdobePDFViewer: Version: 9.5.5 Support
Default Browser: Version: 537 - SDK 10.9
QuickTime Plugin: Version: 7.7.3
OfficeLiveBrowserPlugin: Version: 12.3.6 Support
RealPlayer Plugin: Version: (null) Support
Silverlight: Version: 4.0.51204.0 Support
JavaAppletPlugin: Version: Java 7 Update 55 Check version
Safari Extensions:
Video Converter: Version: 4.0.0
AllMyTube: Version: 4.1.0.0
Open in Internet Explorer: Version: 1.0
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
User Internet Plug-ins:
QQMail: Version: 1.0.2.0 - SDK 10.7 Support
txftn: Version: 1.0.0.6 Support
3rd Party Preference Panes:
Adobe Version Cue CS4 Support
Flash Player Support
GeekTool Support
Growl Support
Java Support
MacFUSE Support
MenuMeters Support
MySQL Support
Norton\nQuickMenu Support
Paragon NTFS for Mac ® OS X Support
Pen Tablet Support
Perian Support
TechTool Protection Support
Time Machine:
Skip System Files: NO
Mobile backups: OFF
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 697.84 GB Disk used: 647.49 GB
Destinations:
NewMBP-TimeMachine-1.1 [Local] (Last used)
Total size: 1
Total number of backups: 11
Oldest backup: 2014-03-18 15:09:46 +0000
Last backup: 2014-04-29 23:24:28 +0000
Size of backup disk: Too small
Backup size 1 < (Disk used 647.49 GB X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU:
47% SymAVScanDaemon
7% Finder
7% WindowServer
2% mds
1% NortonAutoProtect
Top Processes by Memory:
385 MB NortonAutoProtect
262 MB mds_stores
180 MB Safari
139 MB WindowServer
115 MB Finder
Virtual Memory Information:
1.15 GB Free RAM
2.87 GB Active RAM
1.83 GB Inactive RAM
1.05 GB Wired RAM
1.02 GB Page-ins
380 MB Page-outs
I hope you can see something that can be fixed.
Maybe you are looking for
-
How to connect my E61 with computer using WLAN
please tell me the full setting of WLAN how i can connect my computer with WLAN
-
GENERATING ORACLE REPORT IN ADF
Hi, i need to generate offer letter for student. an admin will need to generate offer letter of student bases on their intakeId, branchId, degId, and typeofferletter. currently im doing this in adf form. from here how to transfer the information in a
-
Screen variant not working when assigned to transaction variant in SHd0
Dear All, User requires tax code column for line items in MIRO to be made non-editable. I am using SHD0 transaction for the same. I am able to make the column grey-off by creating screen variant. The program is SAPLMR1M and screen number 6310. When t
-
Why does skype seem to make it so difficult to tal...
I phone my father regularly from my Skype mobile but he only has a landline. I thought it would be a good idea to get my father a skype phone so i went to their global partners and eight weeks after i paid 137 pounds for a phone i am still waiting fo
-
Font Antialiasing/Smoothing
How can I influence font antialiasing/smoothing? All text appears to be smoothed for tube monitors but I want the method for flat screens. Do java.awt.RenderingHints have any effect? If so, where can I set them since I don't use Graphics2D?