*** Turning the "conforming HDV video" render OFF

I had to print some HDV projects back to tape, so on the advice of another person here, changed some settings so that the "conforming HDV video" stage was done before deciding to print the sequence to tape.
I'm finished printing my projects to tape now, and when I'm not editing a new HDV project, each time I press option-R to render, it says "conforming HDV video". How do I turn this "off" so that it will just render out like it normally did in the past?
Thanks in advance..........

Hi, can you tell me how you got the printing to video to work. I´ve tried now for few days to output HD material from my project back to my tape. I have a Sony HVR Z1U Camcorder. The sequence plays well on my computer and my camcorder even starts to record but there is no picture transmitted to the tape.
Where is the problem?
Thanks in advance

Similar Messages

  • *** Turning off "conforming HDV video" when renderring?

    Based on a previous post, and in the interest of speeding up my print to video time, in the sequence menu in the nav bar in FCP I changed "something" that means that whenever I render my HDV video now, it says "conforming HDV video". This is now slowing down my editing time because I don't want to conform the video every time I render a clip. Any idea how to turn this "off" for the time being? Is this even possible?

    When you select Sequence > Render All, that will Conform everything that gets rendered. If, instead, you first click to highlight the clips in the Timeline you want to render, and then select Sequence > Render Selection, FCP will only render, and will not conform.
    However, this will mean that when you Print to Video, Final Cut will have to conform the entire sequence, which will take a very long time.
    It's like the old Fram commercials - "you can pay me now, or you can pay me later." At some point, Final Cut will have to conform.

  • Hi, I can't figure out why I can't render on my timeline. I highlight the segment hit "Apple-R" and it gives me a weird message about "conforming HDV video...." and the bar goes as far as 60-66% and holds there forever. It never renders even partially.

    Hi, I can't figure out why I can't render on my timeline. I highlight the segment hit "Apple-R" and it gives me a weird message about "conforming HDV video...." and the bar goes as far as 60-66% and holds there forever. It never renders even partially.

    Yes, I know. I have been working with HDV for some time. I am wondering why it doesn't render when it needs to.. the red and bright-green lines are above, and I've set the render settings such that ANYTHING I highlight and hit apple-R will render. But its not rendering at all.

  • Conforming HDV Video

    Hi All,
    I have composed around 3 dvds from Final Cut pro over the last couple of months. I am having problem with rendering. Before it was not taking long, I must have changed something in the settings as now when rendering it is coming up with conforming hdv video... can anyone help how I can get back to rendering quicker?? thanks

    plastique45 wrote:
    100% wrong.
    What you changed is the following:
    Sequence>Render All> Full. Uncheck it and when you render, you'll no longer get that Conforming HDV Video message.
    While DUCKY64 might have turned that setting on accidently, you do understand that this kind of guidance is of limited value for those who output to DVD, right?
    As mentioned in the Final Cut Pro 6: Working With High Definition and Broadcast Formats manual, an HDV timeline must be conformed prior to output. That includes export to QT Movie, the most common way folks get HDV media to Compressor (or any other encoder) in order to create .m2v files.
    Beside that, for all types of codecs, not just HDV, the (Dark Green) Full RT media must be rendered in order to be exported via the QT movie route. If you don't render it prior to export, of course, FCP performs the render during export. So, not a whole lot to be gained for folks making DVDs.
    It wasn't fair to say that Andy was 100% wrong. And resurrecting what is, considering the traffic on this forum, essentially a dead thread to make that statement wasn't cool.

  • Conforming HDV video takes ages!

    i shot some footage in hd 50i on my sony Z1 captured it all seems great - did the editing all fine (its a 3 min sequence), but now when i render it within the FCP timeline it seems to taking ages to "conforming HDV video" is this normal?
    I use a macpro 2x3.0GHz Quad-Core Intel Xeon with graphics card

    I hadn't seen that Michael so I appreciate the heads up.
    This HD-Connect MP2 unit looks to be a far more cost effective solution than the previous contender... up to now, for bi-directional conversion, I think the Canopus ADVCHDM1 has been pretty much our only option, though I had conveniently overlooked that when making my last post !
    consider my stance amended ... you only "have" to accept the conform if you don't have access to third party convertors ( and the necessary IO gear for your FCP workstation )

  • I tried to restore my 120 gb iPod and got an error 1413 message - "cannot restore iPod". I started to reset turning the hold switch on and off and now my iPod seems to be permanently locked.

    I tried to restore my 120 gb iPod and got an error 1413 message - "cannot restore iPod". I started to reset turning the hold switch on and off and now my iPod seems to be permanently locked. I had been having trouble syncing music, When I tried to sync, iTunes said it didn't recognize my iPod, even though I was on the iPod page in iTunes which showed the model number and the serial number of my iPod

    I am having essentialy the same problem, but my iPod came from a PC and is now on a PC. The person who gave me the iPod didn't give me the wall adapter piece, so I bought a "Griffin" brand that was said to be compatible with this model. When I first plugged it into the wall, the Apple appeared with a bar underneath as though it was loading the new software. When the bar got to the end, the "plug into the wall" icon reappeared, but when I plug it in to the wall now, that icon is the only thing that shows, even after resetting and trying to run diagnostics.
    When I doc the iPod on a charger I have or plug the USB into my computer and "reset" it, a battery with a charge icon appears, but there is no "motion" in the icon so it doesn't appear to be charging. The screen eventually goes back to the apple then to the "plug it into the wall" icon. HELP!!! Is is possible the wall adapters isn't the right one? Should I be charging through a firewire cable instead (which I also don't have...)?
    Message was edited by: shenards
    Message was edited by: shenards

  • IMessage won't activate my cellphone number. I have tried rebooting and turning the iMessage switches on and off. I still have data bundles and am able to access all social media platforms except iMessage. Why won't it activate my cellphone anymore? Help!

    iMessage won't activate my cellphone number. I have tried rebooting and turning the iMessage switches on and off. I still have data bundles and am able to access all social media platforms except iMessage. Why won't it activate my cellphone anymore? Help! Does anyone know any fixes for this problem ?

    See if this helps: http://support.apple.com/kb/ts4268

  • HT4199 THE KEY TO TURN THE WI FI ON AND OFF DO NOT RESPOND

    THE KEY TO TURN THE WI FI ON AND OFF DO NOT RESPOND

    There is no key.  Stop shouting at us.
    Are you implying that Wi-Fi is greyed out on the device?

  • HT1947 Can I use the "Remote" app to turn the Apple TV on and off?

    Can I use the "Remote" app to turn the Apple TV on and off?

    Welcome to the Apple Community.
    The Apple TV doesn't switch on and of, it goes to sleep and wakes up, but yes you can perform these actions using the remote app.

  • TS3018 my new iphone 5 will not play selected tunes.  It skips around at random for songs.  I tried turning the shuffle feature on and off but no luck.  It also doesn't do it on every song selected.  When it does it, it seems to play the same set of songs

    I have a new iphone 5 that won't play selected music.  When you try and pick a particular song is skips around randomly to another song.  I've tried turning the shuffle on and off with no luck.

    Plug your phone into the wall charger for at least 30 minutes...make sure you have a sim card in the phone...then:
    Leave the USB cable connected to your computer, but NOT your phone, iTunes running, press & hold the home button while connecting the USB cable to your dock connector, continue holding the home button until you see “Connect to iTunes” on the screen. You may now release the home button. iTunes should now display that it has detected your phone in recovery mode, if not quit and reopen iTunes. If you still don’t see the recovery message repeat these steps again. iTunes will give you the option to restore from a backup or set up as new.
    Make sure you have no anti-virus software running or any firewalls...turn all of that stuff off.

  • Is there a way to turn the 4G radio on and off on the iPhone 5

    I'm able to upgrade my phone on the 1st of March and was recently if there was a way in the settings or whatnot if you could toggle the 4G radio on and off. I live in rural Ohio and theres no need for a 4G radio in these hills but I'd love to have the phone so thats a big issue for me. Any advice is appreciated, thank you!

    Settings / General / Cellular
    The specific options available will be contingent on whether the phone is locked by the carrier. In mine, I don't have any LTE/4G settings available, but can disable 3G for better battery life (after which the phone links up to the carrier using Edge)

  • How does one turn the french keys on and off in the wireless keyboard?

    how does one turn on and off the French keys on a wirleless keyboard?

    Hello dustysmart,
    I believe what is going on is that you have a secondary keyboard turned on within Windows. When you press alt + shift at the same time you are alternating between the two keyboards.
    To check this (and possibly delete the French keyboard if you don't want it) you can go into Control Panel and check under Change Keyboard.
    This article will provide you instructions depending on which version of Windows you are using.
    How to Type French Accents
    If I have helped you in any way click the Kudos button to say Thanks.
    The community works together, click Accept as Solution on the post that solves your issue for other members of the community to benefit from the solution.
    - Friendship is magical.

  • Can I turn the OSX.7 'Mail' application OFF?

    How can I completely remove the Apple Mail application from ever opening automatically?
    I only use web-based email programs and have successfully configured most settings to default to my yahoo service for sending and receiving. However, a few still default to the Apple program, causing a number of problems when it opens uninvited including sending dozens of reminders and old emails that weren't removed from the server (probably a different problem, but it seems that just turning mail 'off' would be the simplest fix).
    Now I'm even learning that OTHER people's notifications and reminders on shared calendars (in ical) are opening Mail automatically, and that is REALLY annoying.
    Is there a way to end this frustration?

    Kerr255 wrote: ... How can I turn it off?
    Quit all apps that are using the camera:
    OS X Mavericks: Use your Mac computer’s built-in camera.
    If you have hidden any Login items, 
    you should still be able to see if they are working in Activity Monitor.
    If you are still having trouble, see Isolating issues in Mac OS X
    and/or How to Troubleshoot iSight.
    Message was edited by: EZ Jim
    Mac OSX 10.9

  • How to turn the surround-sound-like effect off with headphones?

    When I plug in the headphones into my ipad I notice the sound in the headphones becomes kinda surround-like. For instance I clearly hear keyboard clicks "at a distance" in front of me when using headphones. This "effect" is nice for keyboard clicks but totally ruins any music listening experience because any song gets distorted and is perceived at some distance when played. This becomes extremely annoying when listening to mono content. The special sound processing applied to get this surrround-like sound effect adds artefacts into the sound, please let me know how to turn this off Apple, I couldn't find any option in the settings.
    Overall, I couldn't even imagine I'd get such an annoying and unprofessional effect applied by default without a possibility to turn it off. If I knew that in advance I'd never buy my ipad since currently it's not possible to listen to music with it
    Message was edited by: vvtrus

    vvtrus, did you ever consider that turning off the clicks or other sounds might have an effect? So, before telling people who want to help you that an answer makes no sense to you, you might first try it.
    Since hearing and listening to music is a very subjective matter which also depends on the quality of the headphones you use, it might be the case that you hear on your iPod something that you couldn't hear on your laptop and portable music player (both of non-apple design). Then you should blame those other devices to deliver you such poor sound. On the other hand, you might have a better hearing than other people which might give you the impression of surround-sound-like effects -- in which case we can't help you either.
    Anyway, there are no settings to turn on or off "surround sound effects".

  • In Iphoto, using a MacBook when looking at a slideshow, do you turn the music down or temporarily off?

    When viewing photos in IPhoto, using a slideshow, how do you turn down the music or just turn it off? Thank you.

    Duplicate posting, answered here: https://discussions.apple.com/thread/3355740?tstart=0

Maybe you are looking for