Turning Time Machine On and Off in Terminal

Last year I was having problems with Time Machine freezes. I found a script, or whatever you call it, that I put into Terminal that keeps Time Machine turned off until a time of your choosing. I set it for 2:00 am. It then turns on, does it's thing and then turns Time Machine off. It did the trick for me. No freezes or sluggishness. Great.
So now I no longer use Time Machine but this thing is still running in the background trying to backup to a drive that is not there.
Does anyone know what this script is called or how I can get rid of it? Apparently I'm googling the wrong terms because I can't find any mention of it out there.
Thanks,
Gary

This search term found many hits: script to turn time machine on

Similar Messages

Can I turn Time Machine on and off

I will be doing video editing and do not want Time Machine to run when I am editing. Is there a way to manually start Time Machine backup when I am done editing.
Thanks
Kirk

Open Time Machine Preference and turn TM off. Go back to the TM Preferences when you are done to turn it on. To initiate a backup immediately, ctrl-click (or right-click) the TM icon (top menu bar or Dock) and click Back Up Now.
Excellent idea to turn it off when video editing. I do the same thing as well.

I just backed up my mac to an external hard drive using Time Machine. What would happen if I turn Time Machine off and then plug the external hard drive back into my computer?

I just backed up my mac to an external hard drive using Time Machine. What would happen if I turn Time Machine off and then plug the external hard drive back into my computer?
What I am ultimately wanting to do is make more room on my computer by backing up all of my files onto the external hard drive and then deleting them off of my computer. However, neededing to be able to retrieve them from the external hard drive later down the road.
From what I have read and am trying to understand, is that I probably shouldn't have used time machine. I need to use the external hard drive like a basic flash drive where I can put things on and get things off without having it automatically update through time machine everytime I connect it to my computer.
Not tech savvy at all and barely understand basics. I need very simple and easy to understand explanations.

sydababy wrote:
and then deleting them off of my computer.
BIG BIG MISTAKE ..... youre making a linchpin deathtrap for your data trying to shove everything on a single fragile HD.
Dont suffer the tragedy other people make, buy another or 2 more HD, theyre cheap as dust.
The number of people who have experienced terror by having a single external HD backup is enormous. One failure that WILL HAPPEN, and kaput,......all gone!
Dont do it, its all about redundancy, redundancy, redundancy.
follow here:
Methodology to protect your data. Backups vs. Archives. Long-term data protection
Deleting them off your computer is fine....having only ONE copy is extremely BAD.
The Tragedy that will be, the tragedy that never should be
Always presume correctly that your data is priceless and takes a very long time to create and often is irreplaceable. Always presume accurately that hard drives are extremely cheap, and you have no excuse not to have multiple redundant copies of your data copied on hard drives and squirreled away several places, lockboxes, safes, fireboxes, offsite and otherwise.
Hard drives aren't prone to failure…hard drives are guaranteed to fail (the very same is true of SSD). Hard drives dont die when aged, hard drives die at any age, and peak in death when young and slowly increase in risk as they age.
Never practice at any time for any reason the false premise and unreal sense of security in thinking your data is safe on any single external hard drive. This is never the case and has proven to be the single most common horrible tragedy of data loss that exists.
Many 100s of millions of hours of lost work and data are lost each year due to this single common false security. This is an unnatural disaster that can avoid by making all data redundant and then redundant again. If you let a $60 additional redundant hard drive and 3 hours of copying stand between you and years of work, then you've made a fundamental mistake countless 1000s of people each year have come to regret.

Automator or Applescript to turn Time Machine on/off

When Time Machine is copying, Final Cut Pro turns into a very enoying beach ball party
Is there a way to write an Automator / Applescript that turns Time Machine off when I start FCP. And turn it back on when I close the app?
As of now, I manually stop Time Machine when I Start FCP. But it's easy to forget to turn it back on...
/S

Time Machine Editor will allow you to set up and schedule backups to occur whenever you like.
You might want to take a look:
TimeMachineEditor - Time Software - Free

When I try to open my iTunes on my iPhone 4S it shuts off right away. Ho do I fix this? I have already turned my phone on and off a bunch of times

Every time I try to open my iTunes app on my iphone 4 s it opens but then shuts down right away. I have already turned my phone on and off and did the reset thing by pushing the home and sleep button together and I hooked up my phone to my computers to update and none of these have worked. What works? Does anyone know? Thanks

Hi
I've got a similar problem. iTunes v10.2 worked fine, but when I tried to update it to 10.5 I got a 'Bonjour' error. I eventually solved that but I still couldn't upgrade to 10.5, so I deleted every single Apple, Quicktime, iTunes, etc file on my PC using Revo Unistaller (because the normal Windows Add/Delete programs wouldn't work) but now, when I install the latest iTunes version from scratch (on XP SP3), it says: "the installer encountered errors before it could be configured.... your system has not been modified"
Any ideas?
Rick

Sign in to itunes store will not disappear and the whole IPad will not let me go into other screens till this pop up goes away. I have entered the password several times and still will not disappear. Turned the IPad on and off but the pop up remain

sign in to itunes store will not disappear and the whole IPad will not let me go into other screens till this pop up goes away. I have entered the password several times and still will not disappear. Turned the IPad on and off but the pop up remain

FIrst try a soft reset by holding down the home & sleep/wake buttons until the Apple logo appears then let go & let the iPad boot up normally.
If that doesn't help then to make sure you have a strong internet connection.
Try resetting Network Settings
Settings->General->Reset->Reset Network Settings,
You won't lose any data but will have to log back into your wifi networks.
Once logged back in and when the pop-up appears, try entering your password again.

My iPhone 5 suddenly stopped opening the Apple Mail app. It had worked flawlessly for years, but just stopped. It worked on my iPad, and of course on the computer. What's going on, and how do I fix it? I've turned the phone on and off several tim

My iPhone 5 suddenly stopped opening the Apple Mail app. It had worked flawlessly for years, but just stopped. It worked on my iPad, and of course on the computer. What's going on, and how do I fix it? I've turned the phone on and off several times, soft reset several times. There was no change in any settings when this happened, nor any new apps were added. Thank you for any help you can give.

Does it not work either way? Sending and receiving? Did you check the settings and make sure that nothing has changed? If you can receive email, but not send it, check the outgoing mail server setting. Make sure that your username and password are in there.
Settings>Mail, Contacts, Calendars>Your email account>Account>Outgoing mail server - tap the server name next to SMTP and check in the primary server and make sure your username and password are entered and correct - even if it says that the password is optional.

TS1702 Can anyone help? For no reason, I cannot open any of my apps. I can open everything else, just not apps. I have turned the ipad on and off several times, this doesn't work. Does anyone know what to do and why this has happened?

Hello, for some strange reason I cannot open any of the apps I have. I have tried turning the ipad on and off and this doesn't work. I can open everything else (videos, camera, etc) just no apps. Can anyone help please?

If it's the apps that you've downloaded from the App Store, but not the Apple built-in ones, then try downloading any free app from the store (as that appears to reset something) and then re-try them - the free app can then be deleted.
If it's all apps including Apple's then try closing them all completely and then see if they work when you re-open them : from the home screen (i.e. not with any app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of each app to close them, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't work then you could try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

Help Incomplete Time Machine Backup and I can't set ownership options

Two days ago my iMac HD stopped working and I decided it was time to upgrade my machine so I purchased a new iMac with Mavericks installed. I seem to only have a partial Time Machine Backup located on my NAS drive, so I read various threads about how to manually retrieve files from the .inprogress file. I was able to browse the package contents and when I navigated to Macintosh HD the folder was greyed out and when I attempt to open the folder it looks empty. When I select get info the Macintosh HD folder shows almost 80GB and over 160,000 files inside. I tried copying the folder onto the desktop which failed and also onto an external drive formatted the same way as the NAS - Mac OS Extended (Journaled, Case Sensitive). Everytime I try it says something along the lines of me not having the ownership rights to copy the file over.
I tried going to the NAS drive and the mounted sparsefile and couldn't figure out how to get the ignore ownership on this volume option. When I go to Disk Utility it says Owners Enabled Yes, I can't figure out how to turn that off to let me copy the file over. I tried some recommendations about creating an Alias to Macintosh HD and also setting up Automator actions Get Selected Finder Items > Get Folder Contents > Open Finder Items > Copy Finder Items (to desktop or external drive) both of these failed.
I also don't understand why I can't view the files inside the greyed out Macintosh HD as get info shows many files inside. The sharing and permissions already says everyone can read. Is there anyway I can recover some of the files? It would be so great!
Thanks for helping me.

I solved the problem and I hope this solution can help others with incomplete Time Machine Backups.
1. I made sure hidden files were shown by pasting the following line into Terminal:
defaults write com.apple.finder AppleShowAllFiles -boolean true ; killall Finder
2. On NAS drive I have a folder called Time Machine Backup and inside that folder it lists the different users with Time Machine Backups. I double clicked the user with the incomplete time machine backup to mount it.
3. Once mounted there should be a folder called backups.backupdb > machine name > dateandtime.inprogress. I right click that .inprogress file and selected show package contents. This lead to another folder randomly named with numbers and text. Inside that folder you should see a greyed out Macintosh HD folder. The date of the greyed out Macintosh HD folder might read something like January 24th, 1984. This appears to be the date that the Macintosh 128k was first introduced. I read on another thread that the creation date of the folder is incorrectly set after a crash resulting in the greyed out folder.
4. Due to the NAS having ownership issues I was not able to drag either the greyed out Macintosh HD or the folder above it to an external drive or the desktop of my new computer. Automator didn't work either. Here is what did work: I trashed the folder with the greyed out Macintosh HD inside from the NAS and dragged it from the trash onto my desktop. The move took a few hours to complete and the files were now all successfully on the new computer.
5. Once on the desktop the Macintosh HD folder was still greyed out. The solution was to select in the finder: View > Show Path Bar, then search for any file you remember inside your backup. For example I searched the word download and files inside the greyed out Macintosh HD folder showed up. Left clicking the file confirmed the path, that it was from the greyed out Macintosh HD folder. Now you can simply right click one of the folders in the Path Bar and open in new tab if you have Mavericks. I still couldn't directly open the Macintosh HD folder in a new tab, but I could open any of the subfolders inside in a new tab, including the users which lets you access all the backup files. I tested in Mountain Lion that you can also choose Open in Enclosing Folder by right clicking the file that you searched for or right clicking the folder in the bottom of the Path Bar.
6. Once I was done organizing backup files, I turned off hidden files by pasting this line into Terminal:
defaults write com.apple.finder AppleShowAllFiles -boolean false ; killall Finder
This took me days to figure out how to make use of an .inprogress file and greyed out Macintosh HD folder.
Hope this helps!!!

Can't see time machine drive and can't boot

Last week the internal hd on my Mac mini (mid-2010) began failing. I took it in and AppleCare replaced the drive. The genius told me they loaded 10.7.3 and I should be able to use Time Machine (TM) to bring it all back. So I go home, plug in my TM drive and the Mac can't see the drive the TM is on. And yet I know it recognizes the drive because if I turned it off it would give me the nasty warning about disconnecting before unmounting. So not knowing what to do I went and popped in the installation disc that came with my Mac mini (10.6), and booted with the cd. I told it to restore from TM, and this time it sees my drive and transfers the data. When it restarts I get the gray screen with a null (not permitted) sign. So I can't make heads or tails of it an decide that maybe I have to make a clean install and then upgrade to 10.7.4 and then try time machine (I'm grasping at straws now). Only when I attempt to to restart after installing 10.6 it go from a gray screen to a blue screen (of death) and just sits. I'm baffled and don't know what to do. Could my time machine disk, which was backing up a failing internal HD, have been bad? What do I do?

Hello:
If I were you (and I am not), I would bundle up the repaired computer and your Time Machine drive and take it in and ask the Apple person to bring it back to life. IMHO, that should have been done the first time.
Barry

Time Machine backup and main drive corrupted. Help! (REWARD OFFERED)

Here's the deal:
I have a Macbook Pro and a Mac Mini both runnign Snow Leopard. I use the Mac Mini as a kind of media center / server, it has a few external drives connected to it. On of these drives (1GB) is dedicated to Time Machine, the Mac Mini (80 GB hard drive) backs up to it directly and the Macbook Pro (500 GB hard drive) does it over the network (Time Machine created a sparsebundle). This has worked well for years now. Occasionally I got the error that Time Machine needed to start a new backup because the old one was corrupt. That happened about 2-3 times a year (did the same thing when I backued up via USB). Now about 2 weeks ago, that error came up and I just let the Macbook Pro on overnight and connected the ethernet cable for faster transfer.
When I woke up, the Macbook Pro didn't respont at all, spinning beachball, no response at all beside mouse movement. I let it do it's thing for another 10 hours (while I was at work) and just held down the power button to power off and restart it. But all I got was the gray-on-gray flashing folder with the question mark in it, that's what you get when the Mac can't find bootable partitions. So I popped in the OSX Snow Leopard install disk, ran disk utility. It saw the hard drive, but no partition (i.e. Machintosh HD) on it. I checked the Time Machine backup and the sparsebundle was 300 GB (the Macbook Pro had 400 GB used, the remaining 100 GB were free). There is no way to restore from an unfinished Time Machine backup...
First thing I did was clone the internal (Macbook Pro) hard drive to a DMG disk image using DiskDrill (the only program I found that could recognize the drive at all, not even DiskWarrior could). I also bought the exact same hard drive model and partitioned it like the cloned the corrupted hard drive to the new one using ddrescue (a command line tool that doesn't quit upon i/o errors but proceeds and tries to recover as much as it can). It copied everything except 65 kilobytes, the corrupted drive seemed to be physically damaged in a bunch of sectors relatively at the beginning of the disk. Since I had now an exact copy on a fresh, healthy drive, I went crazy trying out Disk Warrior (didn't recognize the drive at all), data rescue, testdisc, p a Windows isk, etc. Only R-Studio (on windows) showed the EFI and Macintosh HD partitions on there, they started and ended on the same sectors on the corrupted drive and its clone. After some research, I figured that the partition table was corrupt so I reformated the clone disk using the OSX Snow Leopard install disk (1 HFS Journaled Partition with GUID Partition table). R-Studio showed the EFI and Macintosh HD on that reformated drive, again, same sectors as before. So I figured I could just copy just the bytes where the Macintosh HD starts from the corrupted drive to the clone (using ddrescue). That worked, after almost 24 hours, I had the clone drive with a "disk1" partition on it that even disk utility could see.
Now I was able to run Disk Warrior on it, but all it could do was recover a few Application folders (Resource-Folders and lproj-stuff), about 100 MB in total. It couldn't repair more of catalog file apparently. Luckily, Time Machine backed up quite a bit (300 GB out of 400 GB of data) and I was able to manually copy all the Dokuments, Desktop, user Library, Applications, Music, Download and Movies. Unfortunatley, only a little bit of the Pictures folder was copied. iPhoto library (80 to 100 GB) was nowhere to be found, backup must have failed right then. I can salvage the drives (time machine drive, original hard drive with a few broken sectors, DMG-image of that drive, 1-1 copy of that drive with partition table repaired) but that only gives me files with numeric names and today's date on teh JPEGs (instead of the date the picture was taken).
Is there any way I can recover that iPhoto library? It appears the catalog file got corrupted because the hard drive (only 8 months old...) failed on a few sectors. If I understand it correctly, the catalog file on HFS+ file systems is where the folder structure and file names are stored in a B-Tree. I can't imagine that some i/o error during backup can totally annihilate that file when it was working perfectly before. Here's a few things I want to try out but haven't figured out how so far:
- Time Machine had to start a new backup. There's plenty of free space on that drive so there's a good chance there's old data left on it. Is there a way to restore files (including file names) and fodlers from deleted time machine backups?
- Is there any way to re-build that catalog file from what is there left on the original hard drive? I can't imagine 65 kilobytes destroys it all.
- Are there other ways to recover my iPhoto Library? The raw JPEG (and AVI) files with correct file names or metadata would suffice.
Thanks in advance for any help, I'll actually reward the person with a working solution, 5 years of photo memories are somewhat important. It really ***** that a failure during a backup destroys that...

Final Update:
The catalog file on the original hard drive could not be fixed. Seems like Mac OSX tried to repair the catalog file while the sectors this file resides on failed. To make things worse the partition table was also broken beyond repair, even overwriting the sectors with a new correct partition table didn't help. DiskWarrior found less then 100 MB worth of stuff, mainly Applications folders.
I recovered pretty much everything from the incomplete Time Machine backup by right-clicking the sparsebundle and browsing through the folders with the long alphanumeric names, looking for the version of the folder with the most files in there. All I was missing was part of the ~/Pictures folder, i.e. photobooth pictures and the whole iPhoto Library. My best option was to recover these files using data recovery tools.
DiskDrill proved to be the absolute best, fast, responsive, efficient, and the only one able to mount the DMG-file with no valid file system on it. As there were many i/o errors and broken sectors on the original hard drive, I made a copy of it using a free command line tool called ddrescue (the standard dd tool just aborted when it encountered the i/o error). ddrescue copied the whole drive to a DMG image, I had 56 kilobytes with errors on the first pass, but it managed to shrink that down to just 4 kilobytes (wow!) after the second pass where it tries to re-read the broken secors. It took about 24 hours for a 512 GB 2.5" drive (5400 rpm) but well worth it. Be advised that ddrescue is really persistent and tries everything to recover those last errorneous bytes. At the very end of the process, the read/write head of the hard drive just goes wild trying to catch the data on the sectors with different momentum. This works but I assume this is pretty damaging for the original drive. I also copied it all to a new hard drive (again using ddrescue) and tried partition and catalog repair tools on that (DiskWarrion, testdiks, pdisk, etc.). Still no hint of a good result.
I made a deep scan on the clone hard drive with DiskDrill. At the end (after about 8 hours over USB) it found 13 partition (I assume that's the Macintosh HD, EFI and some DMG files lying around) and hundreds of thousands of pictures. I restored some JPG files just to check the quality, some were damaged, some were good with all the EXIF data intact. I just made it copy all JPG files into a folder. I know the pictures taken from my camera produce JPGs larger than 1 MB and smaller than 5 MB, so I sorted them by size and moved the smaller and larger files into seperate folders. I took the remaining folder (100 GB) and just dragged it into iPhoto. It imported them overnight. Auto-Split by events and I got my library back, alas with different file names, originals and edited versions side by side, lots of duplicates, some damaged, some not. But hey, all the pictures in chronological order. Okay there was also one large event with all the JPGs without valid EXIF data landed inside, iPhoto just takes the file creation date (i.e. the date where the recovered file was copied). As far as I can tell, these are all just data corpses, halfway overwritten copies, random pictures from the internet, desktop pictures, etc.
I started to work my way back through the events, deleting the duplicates and renaming the events. There's an app called "Duplicate Annihilator" which apparently can find duplicate pictures in iPhoto and mark them for you. The free version only does 500 pictures but if it works, I'll get the full version. It can mark th eduplicate photos by adding something to the picture comment in iPhoto so you can manually review it all. Good stuff!

Time capsule as time machine backup and NAS?

I've read the TC section of the website and notice a blurb about computers able to connect to it as a HDD.
I realize the device has yet to be released but was wondering about this. I have a handfull of macs and a handfull of xp machines on my network (wired and wireless)
1 of my XP machine is just used as a file server. (1.5TB NTFS formated holding all video/audio/docs as well as having iTunes running to download HD podcast) All computers (Mac/XP) can access this. Five of my XP computers are MCE2005 which are configured to record SD and HD shows directly to this box.
I have yet to have a HFS formated drive to actually do time machine backups and I would like to start. I understand that going with TC I will loose some abilities I currently have by running a dedicated computer/file server but I like the fact that it is small and self contained.
I just want to make sure I understand the specifiations correctly. Can I make a various folders on TC and then map it to my Mac/XP machines via windows naming convention (ie \\TimeMachine\RecordedTV\)
I am in the process of upgrading my file server so this would be a perfect time to think about going this route. Should TC not meet my needs I will continue with my build of a Raid 5 server.

Until we get more information, at the present time the only certain thing we know about Time Capsule is that it will support TimeMachine backups.
What we don't know:
1. whether TimeMachine backups to network drives other than Time Capsule will ever be supported
2. whether the Time Capsule internal drive can be used for general file storage, or only Time Machine backups. Current information on Apple's web site could be interpreted either way. I suspect it can be used for general file storage - but that is just my opinion.
If it is not essential that you make a purchasing decision before Time Capsule ships within the next month (and more detailed information becomes available) I suggest you wait. My two cents worth of opinion - if it is general file storage that you want, and Time Machine automated backups are not a priority on the "wish list", then I think you would be far better off setting up your own network file server rather than using Time Capsule for this purpose.

I told Time Machine no and now it won't detect my external drive...

Whenever I would plug in my external drive it would pop up with a Time Machine dialog asking if I would like to set it up for backup. I usually hit the ask me later option. Well last time I just hit no. It was starting to annoy me. Well now, when I plug in that drive, it won't detect it or pop up on the desktop. It works on my laptop. How the heck do I get it back?! I have files I really need to transfer!
I would appreciate any info you can give. My i7 is my first Mac in 10 years and I am a bit lost.

As far as I know the drive should still appear as an icon on your Desktop even if you turned down Time Machine's request to use it as the TM backup drive. What's on the external drive right now? Is it just stuff that you dragged and dropped onto it for backup? But if you've used it as a Time Machine backup on your laptop then maybe that's part of the reason you're having difficulty getting it to show up.
P.S. If you want TM to ask you again if you want to use this external drive as a TM backup, go to Applications and open Time Machine and then go to Time Machine preferences and make the selection you desire.
Regards,
Steve M.
Message was edited by: Steve M.

TS1398 Hi. My wifi keeps disconnecting. I kkep turning the wifi on and off in settings but will disconnect again after a minute or so. I use an ipad2 and my ios is updated. How to troubleshoot? - kay peralta

Hi. My wifi keeps disconnecting. I keep turning the wifi on and off in settings but will disconnect again after a minute or so. I use an ipad2 and my ios is updated. How to troubleshoot? - kay peralta

Is this happening with one particular network or with all? Make sure iOS is updated on the device.
Try this:
Reboot ipad by pressing and holding both the home and sleep/wake buttons at the same time until the apple logo appears on the screen, then let go. Then try to connect to network.
Go to settings, Toggle airplane mode on/off. Make sure bluetooth is off. Turn on wif (airplane mode off). Try to connect.
Reset Network Settings
Go to settings/general/reset/reset network settings. Then try to connect to network.
If its your home router, then reboot router by unplugging for 5-10min. (do this while you're resetting network settings).
If problem persists, then check for firmware updates on your router.(you check router manufacturer support website for downloads and instructions).

Turning wireless card on and off

I just got my new laptop and am putting Arch on it of course. It has the Intel 3945 card which is pretty common so I thought I'd use the iwlwifi driver. I followed the Wiki and even perused a couple other laptop wiki entries with the same card to see how they did it but none of them have worked correctly. I think the reason is because the actual card isn't turned on. When I boot into Windows the little wifi light comes on indicating the card is active and I can connect to a wireless network then but when I boot into Arch the light is off. iwconfig wlan0 essid mynetwork and iwconfig wlan0 key ******** both run without error but I don't have an IP address.
The only problem is there's no key combination to turn the card on and off. It's a little button that you slide one way to turn on bluetooth and wireless and the other way to turn it off. The bluetooth light is on in Linux but not the wireless. It's driving me crazy because I can't seem to find anything in the manual about it and the card is set to be turned on by default in the BIOS. What else can I do?

OK, I think I figured it out. I'm now using my wireless card to browse the Internet. I think what was happening was my wired interface (eth0) was conflicting with my wireless interface. Once I brought my wired connection down, I was able to connect with the wireless one.
Maybe someone can simplify the process for me now. I've disabled eth0 in rc.conf but in order to get the wireless up and running I have to bring up wlan0 with ifconfig, use iwconfig to configure the essid and key and then connect through wifi-radar (even though wifi-radar already contains the correct configuration). That means I can't just connect with wifi-radar after boot. I have to run those iwconfig and ifconfig commands first. I considered putting wlan0 as an interface in rc.conf but the Wiki entry I read said not to do that for the 3945 card. So is there any way to streamline this process?
And I guess Linux just doesn't send any power to the little light even though it does for the bluetooth one. That really doesn't boher me but it did throw me for a loop the first time around.

Turning Time Machine On and Off in Terminal

Similar Messages

Maybe you are looking for