Turning Touch on its Side...NOT WORKING HELP!?!?!?
Hello All,
I am a new Apple user so please be nice
I just got my Ipod Touch in the mail today and have been fooling around with it for a few hours now.
When I try and turn the Ipod on its side (so that you get the landscape view of photos, websites, or the CD Cover catalog), it doesn't always work.
Sometimes I have to flip the Touch back and forth 15 times at all different angles before the a photo switched from Portrait View to Landscape view.
Is there a trick to turning it on its side, or is this a defective Touch? Any thoughts?
Thanks
Joe
It seems that if I tilt it up and turn it on its side, then it switches to landscape view, but if I have it laying flat in my palm, and just rotate my palm, it doesn't move.
Is this normal?
Thanks for the response.
Similar Messages
-
My MacBook Air won't turn on? I have to dropped it but earlier in the day I got a notification about a full single drive. I have tried the ideas in the communities but its still not working, help!
See this article:
http://support.apple.com/kb/ht3964
Find the section that applies to your computer, and follow the instructions.
Shut down the computer.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer.
Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC. -
When charging my Ipad mini, it turned off and its still not working, what do i do pls??
First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here. -
HELP MEEE!!!
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Creative Zen Micro with a ! on its side: not work
I had the Zen Micro installed in my computer but it stopped working. If I now connect the portable device nothing appears, and it tells me that I have to install the drivers. I put the cd in, but at some point it gives me back an error message saying that the .inf files refers to a service that doesn't work. What am I supposed to do?Does it have anything to do with a usb problem?
ANY IDEAS?
-
i really need help solving this kind of problem because i love my phone pleace help me
iOS devices cannot play every format that can be played on other devices. You can convert unsupported formats to a supported format for import to your iOS device.
Here's one solution to use if you're ripping DVDs:
http://www.ipadvideoconverter.com/
Here's a little guide on the use of periods at the ends of sentences:
http://en.wikipedia.org/wiki/Full_stop -
i have a generation 1 ipod touch my wifi is not working, under setting the wifi says no wifi and is gray. i have tried resetting it and its not workin. what should i do, please help. thanks
If a restore did not fix it, you have a hardware issue--possible bad wi-fi radio.
Basic troubleshooting steps.
17" 2.2GHz i7 Quad-Core MacBook Pro 8G RAM 750G HD + OCZ Vertex 3 SSD Boot HD -
I am signed into the App Store on my iphone 4 and one of my apps need updating and my brother is signed into it because I didn't have any credit to make an ID so he signed in so I could download apps but its like its locked to his Apple ID I have tried signing out and turning my phone off its just not working please help.
Apps are locked to the Apple ID that was used to download them. You will have to sign in as your brother in order to update it.
-
SOMEONE PLEASE HELP ME THIS IS MY FIRST TIME DOING THIS MY IPOD IS DISABLED AND IT SAID CONNECT TO I TUNES I DID THAT AND ITS NOT WORKING HELP ME PLEASE AND THANK U
Please turn off your caps lock.
See http://support.apple.com/kb/HT1212. -
my ipad mini is not syncing music onto in, my ipad has been replaced to see whether the issue is to do with the ipad but its still not working.
ive tried everything and ive been to the store which was when i was given a new ipad mini. i have a a windows PC please help thanksAre you attempting to sync music from your iTunes Music Library on your PC?
What options do you have set on the Music Tab for your iPad in iTunes?
What happens when you sync?
Any error messages? -
when i go in my settings on my ipod touch 3gen it says no wi-fi as in i cant connect to any wi-fi at all i tried to restore but did not work HELP PLEASE
See:
iOS: Wi-Fi or Bluetooth settings grayed out or dim
If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
Apple Retail Store - Genius Bar -
i cant open my ipad after i turned on the voice in accessibility i have a passcode and i tried to enter my password but it not working. help me please..
i updated my ipad in ios 6Turn off VoiceOver
1. Press the Home button
2. Tap Settings.
3. Then double-tap Settings.
4. Tap General.
5. Then double-tap General.
6. Use three fingers on the screen to scroll to Accessibility
7. Tap Accessibility.
8. Then double-tap Accessibility
9. Tap VoiceOver
10. Then double-tap VoiceOver.
11. Tap "On" next to VoiceOver
12. Then double-tap "On" to turn it off. -
my iphone 5 touch screen function is not working. I cannot do anything right now even reset it because i cannot disable the Find my Iphone feature which is needed in resetting your iphone thru itunes. Please help. My phone is already out of warranty and i cannot just rely on techinicians here in our place since it is possible they might switch the original parts to something else...please help me thanks
Log in to https://icloud.com/find using your Apple ID. Erase and then disconnect your phone from your account. You can then restore it using iTunes.
-
Hello, it's been 5 days now since my imessage has not working..and i have chatted to the costumer for two times. I took thier advice and instructions just to enable to send and receive on it but unfortunately until now its still NOT working. Is there anybody who could help me please?
Try this even if you have already. Just make sure to follow the steps specifically.
Go to settings > Facetime > send and recieve > tap on your apple id and sign out. If your not signed in then that will work as well.
Go to settings > Messages > sent and recieve > tap on your apple id and sign out.
Restart the iPad by doing the slide to power off setup. Just hold the power button on the top right till it turns off.
After the iPad has been restarted:
Go to settings > Facetime > and sign in
Go to settings > Messages > and sign in
Wait about 3 min then restart the iPad again. Same instructions as above.
When you restart you should be able to use messages again. If not then call support again and talk to someone higher than the first level support they have. -
My iPod Touch Front Camera Is Not Working Properly.
My iPod Touch Front Camera Is Not Working Properly.When I Try To Take A Picture ,It's Very ,Very Blurry. When I Put My Finger Close To The Camera It Looks Perfect. You Can See My Skin Lines{I Dont Know What They're Actually Called} It's Like It I Had It On Zoom Or Something . My Back Camera Is Perfect,And When I Put My Finger Close Its Just Blurry. Can You Help? I've Tried Everything ,Cleaning It, And Reseting It.
Please Help.
Thank You.The poster said he has iOS 5.1 which is the latest update.
apple81 wrote:
Hi: I had the same problem but it was fixed by performing software upgrade iOS 5. Go to settings-general-slect-update software.. Fixed it right way and now is even better with more features..
Maybe you are looking for
-
How can I change the language of my German copy of Master Collection CS6
Hi there, The full Master Collection Suite v6 I installed this weekend is in German, how do I change that to english for all 20+ applications? it's driving me bonkers trying to find a fix so if anyone can help big hugz to yoU! Eva
-
Executing a command using Runtime Class
How to execute a command on a differnet machine with different ipaddress using Runtime Class My code is String[] cmd = new String[3]; cmd[0] = "192.1...../c:/WINNT/system32/cmd.exe" ; cmd[1] = "/C" ; cmd[2] = args[0]; Runtime rt = Runtime.getRuntime(
-
Petition to bring back "Print PDF" to InDesign
Would anyone else like to join a petition for bringing back "Print PDF" as an option in the InDesign Print menu? I am on CS4 and my colleagues are on CS5 and they have no end of problems getting their PDFs the way they want them from the command near
-
Calling stored procedure from session bean method
I have a situation like this : I have one method on a stateless session bean (and I mark this method as container managed transaction). For database related stuff, I am not using entity beans, I am using my own layer of OR mapping. This method does a
-
How do you retrieve individual files from Time Machine?
If a file original is lost or becomes corrupted, is there anyway to retrieve that individual files from Time Machine? If so, how?