Turns on but blank screen
My macair turns on with just the cursor on a blank screen. I bought it 6 months ago and there has never been an issue with it. Any ideas would be appreciated>
Startup in Safe mode
http://support.apple.com/kb/PH14204?viewlocale=en_US
Repair Disk
Steps 1 through 7
http://support.apple.com/kb/PH5836
Reset PRAM: http://support.apple.com/kb/ph14222
If any of above written steps do not work, try an erase and install of OS X,
provided you have a backup.
Erase and Install
http://support.apple.com/kb/PH14243
Best.
Similar Messages
-
I have an iphone 4s that is having display issues. If I turn the phone on, it vibrates to acknowledge it successfully turned on but the screen stays solid black. I can plug the phone into my computer and itunes will recognize the phone as well. However, itunes can not do anything with the phone because the phone is locked and I can not unlock the phone because the screen is black.
>CURVEBALL!!!<
The screen does work though! Through trial and error along side a little troubleshooting, I was able to figure out that the screen will cut on after the phone dies completely. The phone has to die completely with no battery power left. Then if I plug the phone into a charge and wait a while for it to charge, the phone will turn on like nothing was ever even wrong with it. I charge the phone up to like 30% and turn it off then bam the phone turns on but the screen is solid black again.
I am currently in the process of waiting for the phone to die and when I turn the phone back on I am going to completely remove the auto-lock and lock code off of the phone for the time being.
Any other suggestions? Please help!Sounds like the device was dropped at some point and damaged as a result.
Take it to Apple for evaluation and a replacement. -
my iphone 5's screen blacks out every now and then. the phone is turned on but the screen is black and i can receive calls. what is wrong with my phone?
I have to believe this has something to do with iOS 7 issues. I have taken my screen blacked out 5s twice to the Genius Bar and the found a bunch of system apps had crashed. So if this is the case, is iOS7 the problem?
-
Outlook mail being received but blank screen when I open the app
Outlook mail being received but blank screen when I open the app
This seems to be going on around here for a couple of days. I have seen several discussions about the mail app opening to a bank screen with different variations and issues after the blank screen appears. I wish I could say that my suggestion is the definitive fix, but I can't. Give it a try anyway and see what happens.
Close the mail app completely and reset your iPad. Not data will be lost.
In order to close the mail app, you have to drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the mail app then swipe "up" on the app preview thumbnail to close it.
Next, reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up. -
My computer will turn on but my screen is black
My computer will turn on but my screen is black
Sounds like the device was dropped at some point and damaged as a result.
Take it to Apple for evaluation and a replacement. -
Hi! My iMac turns on but the screen is black. I hear it on. Is there a light dimmer?
What can I do? Thanks!!Time to take it to the Apple Store or AASP to be professionaly diagnosed.
-
Equium A300D-16C turns on but the screen shows nothing/stays black
Hi there, I have a Toshiba Equium A300D-16C laptop.
It was fine until now...
When I press the power button, my laptop turns on but the screen remains black / off.
HDD indicator doesn't flash or anything ... ( in case this helps )
I've also tried to remove the battery, hold the power button for 30s and plug the power cord back in... Same thing laptop turns on but screen is black.
I tried to connect my laptop to my PC's monitor using HDMI cable but no success... Laptop turned on but my pc's monitor was showing nothing.
I haven't changed anything inside my laptop or unscrewed it.
PS:
I quite often kept my laptop on the bed/pillow so it may have something to do with overheating or something.
How did I get to this point:
Yesterday my laptop was fine, there was nothing wrong with it... I switched it off at night but when I tried to switch it back on this morning that's where I faced this problem.
Any help would be appreciated.
Many thanks,
Rejanu.Hello
> I tried to connect my laptop to my PC's monitor using HDMI cable but no success... Laptop turned on but my pc's monitor was showing nothing.
Its very good that you have this test with an external monitor because so you could make sure its not related to internal monitor and its working properly.
Well, you have tried a lot so my personal opinion is its a serious hardware malfunction It could be related to mainboard or CPU in my opinion
I think such hardware diagnostic can only be done from an authorized service provider. I think you should contact the guys. They can help you to get rid of this problem :) -
I let my phone dry out in rice for over a week. I see it turn on but the screen is black. If you hold it to a light you can see the Apple logo. How can I fix this?
It depends which country you are from below is US
http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipho ne -
My 2008 MacBook Pro is turning on but the screen stays black. It makes the turning on noise but nothing happens after that. Can anyone tell me what wrong with it and maybe help me out??
Make a PRAM reset > http://support.apple.com/kb/HT1379 Also, reset the SMC > http://support.apple.com/kb/HT3964
If they don't work, that may be a display or GPU issue. Take your MacBook Pro to an Apple Store or reseller. If you want to know which is the part, connect an external display -
My iphone 4s will still work and is still turned on but the screen will not light up. its completely black and my top button is broken.
Apple won't replace an iPhone under warranty if the iPhone has been opened/tinkered with by you or by a 3rd party, but they may under Apple's out of warranty or not covered under the warranty "repair" price.
There is only one way to find out for certain. -
My 2008 MacBook Pro will turn on but the screen is black. It makes the sound when it turns on but nothing afterwards. Can someone plz help me.
Why not post here https://discussions.apple.com/community/notebooks/macbook_pro
You are more likely to get an answer -
My computer turns on and the light at the botton is on, but the screen is blank. I have tried pressing every button, turning it on/off, and also pressing the mouspad.
I have the same problem, the start up sound plays through the speakers but nothing on the screen
-
The brand new I pad air has just a grey screen and Siri says "connect to internet" but obviously no graphics to enable to do this
Frozen or unresponsive iPad
Resolve these most common issues:
• Display remains black or blank
• Touch screen not responding
• Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/
iPad Frozen, not responding, how to fix
http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
Black or Blank Screen on iPad or iPhone
http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Cheers, Tom -
Presario v6000 note book turns on but black screen and fan only
presario v6000 note book turns on, fan works but screen is black. No beeping sounds or blinking lights. Lights by numbers are on . Had new motherboard installed by repair store twice. Worked for a few days and now doing the same thing. Any suggestions please??
Hello kkelly342,
I see that you are having a start up problem with your computer. I have a couple of suggestions that may help with this issue.
Here is a link to some troubleshooting steps for blank screen issues on start up. Follow the steps in the link and let me know what happens.
Have you tried on an external monitor?
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓ -
My MacBook wouldn't go to sleep, it keeps loading, so I have to turn it off. When I turn it on a blank screen comes on, I shut the lid and open it and the main menu screen comes up but the cursor won't work for awhile. Then, eventually, the cursor will work and everything is fine. Hmmm?
Just in case it still didn't work...I copied and pasted the information below...
Battery Information:
Model Information:
Serial Number: D86052301B8DCMDAG
Manufacturer: SMP
Device Name: bq20z451
Pack Lot Code: 0000
PCB Lot Code: 0000
Firmware Version: 0301
Hardware Revision: 000a
Cell Revision: 0173
Charge Information:
Charge Remaining (mAh): 3638
Fully Charged: No
Charging: No
Full Charge Capacity (mAh): 4196
Health Information:
Cycle Count: 631
Condition: Normal
Battery Installed: Yes
Amperage (mA): 0
Voltage (mV): 8103
System Power Settings:
AC Power:
System Sleep Timer (Minutes): 10
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 10
Wake on AC Change: No
Wake on Clamshell Open: Yes
Wake on LAN: Yes
Current Power Source: Yes
Display Sleep Uses Dim: Yes
Standby Delay: 4200
Standby Enabled: 1
Battery Power:
System Sleep Timer (Minutes): 62
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 62
Wake on AC Change: No
Wake on Clamshell Open: Yes
Display Sleep Uses Dim: Yes
Reduce Brightness: Yes
Standby Delay: 4200
Standby Enabled: 1
Hardware Configuration:
UPS Installed: No
AC Charger Information:
Connected: Yes
ID: 0x0100
Wattage (W): 60
Revision: 0x0000
Family: 0x0085
Serial Number: 0x000979a4
Charging: No
Maybe you are looking for
-
hi how can i open file in client computer when he click on a button i want to show him a xls file and if he want save it on his computer can i save on his computer too? tanx
-
I have done a simple JPDK portlet in JDev:10.1.2 (pdkjava.jar version: 9.0.4.1.0) and deployed to a locale stand-alone OC4J. The I added the provider successfully to OracleAS Portal 9.0.4.(pdkjava.jar version: 9.0.4.0.0). If I try access the provider
-
Interfaces in port-channel keep err-disabling because of keepalives
Below is the current portchannel that I am having problems with. The interfaces on Switch A keep going into an error disabled state because they receive their own loopback. Cisco says to disable keepalives and that it will fix the problem, but I do
-
SAP BW query to BOBJ Universe: The supplied XML is not valid.
Help! The Business Objects Sever XI is giving us messages like the below, on some but not all BOBJ Universes based on SAP BW queries. A database error occurred. The database error text is: The supplied XML is not valid. [various InfoObjects] [LEVEL0
-
Can we restrict a master data characterstic using another master data chara
Hi All, Can we restrict a master data characterstic using another master data characterstic, if they were both compounded together. There are two fields viz.., A,B in r/3 master data table in which A and B combinely serve as a key. In BW side i have