Turns on while shut
After I shut my computer off and the screen goes black, it's atleast 5 seconds before I shut it to make sure it's not still shutting down, maybe it is still shutting down because alot of times after I shut it and go plug it in it will make the starting up sound and start up while it's closed. It's not really much of an issue only that it's confusing and annoying.
This could be hardware related and you should get it checked by visiting an Authorized Apple Service Provider/Apple Store or by contacting Apple Support. Maybe your battery needs to be replaced, they can check the battery life online.
You can also visit this page to do that: iPhone - Contact Support - Apple Support
Click on Apple Support, then on ->Battery, Power &Charging ->Battery questions and troubleshooting, and follow the instructions.
Similar Messages
-
Battery drains while shut down?
If, having SHUT DOWN (not sleep) my MBA, and let it charge until the magsafe light is green and let it charge overnight, I unhook the magsafe while keeping the MBA off and closed, I leave it TURNED OFF for an entire day, go out to use it elsewhere and when I get there, the battery is completely dead.
Why? What can I do to fix it?
The Air seems to shut down MUCH quicker than my old MacBook Pro, so I don't know if it's just not shutting down properly or not. The same thing happens if I hold the power button for a hard shutdown until it shuts off and repeat the charge/wait process.
Like I said, this is with it SHUT OFF and not in sleep mode. If I can't leave it turned off while I wait in an airport, what's the point exactly? Is anyone else experiencing this? (I know at least one person is on another forum, but no one gave him any answers)Used the timer on my iPhone. From green status light (turned off) to when I woke up it was eight hours, 41 minutes, 48.6 seconds later and the battery status was as follows:
Model Information:
Serial Number: SMP-ASMB017-3887-8cb
Manufacturer: SMP
Device name: ASMB017
Pack Lot Code: 0000
PCB Lot Code: 0000
Firmware Version: 0009
Hardware Revision: 0401
Cell Revision: 0100
Charge Information:
Charge remaining (mAh): 2938
Fully charged: No
Charging: No
Full charge capacity (mAh): 4977
Health Information:
Cycle count: 9
Condition: Good
Battery Installed: Yes
Amperage (mA): -1101
Voltage (mV): 7522
System Power Settings:
AC Power:
System Sleep Timer (Minutes): 0
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 20
Automatic Restart On Power Loss: No
Wake On AC Change: No
Wake On Clamshell Open: Yes
Display Sleep Uses Dim: Yes
Battery Power:
System Sleep Timer (Minutes): 5
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 1
Wake On AC Change: No
Wake On Clamshell Open: Yes
Display Sleep Uses Dim: Yes
Reduce Brightness: Yes
Hardware Configuration:
UPS Installed: No
AC Charger Information:
Connected: No
Charging: No
That's a 41% DRAIN in battery overnight, with it being turned off.
*Makes appointment at Genius Bar* I'll post results of the visit here just in case anyone else has this problem. -
The monitor on my macbook is turned off while I was working, I could not in any way to do it again, I could see through the screen off the open pages I was working on, I had to turn off the machine and restart it. and it runs. WHAT 'success? The report says the console like this: (at approximately 12.30)
No receipt for 'com.apple.pkg.JamPackWorldMusicInstruments' found at '/'.
03/05/11 12:08:30 [0x0-0x1e01e]. Com.apple.garageband [239] No receipt for 'com.apple.pkg.JamPackWorldMusicInstruments' found at '/'.
03/05/11 12:08:30 [0x0-0x1e01e]. Com.apple.garageband [239] No receipt for 'com.apple.pkg.JamPackOneInstruments' found at '/'.
03/05/11 12:08:30 [0x0-0x1e01e]. Com.apple.garageband [239] No receipt for 'com.apple.pkg.JamPackOrchestralInstruments' found at '/'.
03/05/11 12:08:30 [0x0-0x1e01e]. Com.apple.garageband [239] No receipt for 'com.apple.pkg.JamPackRhythmSectionInstruments' found at '/'.
03/05/11 12:08:30 [0x0-0x1e01e]. Com.apple.garageband [239] No receipt for 'com.apple.pkg.JamPackRemixToolsInstruments' found at '/'.
03/05/11 12:08:32 MIDIServer [255] MIDIServer [255] starting; arch = i386
03/05/11 12:34:35 com.apple.launchd [1] *** launchd [1] has started up. ***
03/05/11 12:35:06 com.apple.launchd.peruser.501 [86] (com.apple.ReportCrash) Falling back to default Mach exception handlers. Could not find: com.apple.ReportCrash.Self
03/05/11 12:35:09 com.apple.launchd.peruser.501 [86] (com.apple.Kerberos.renew.plist [110]) Exited with exit code: 1
03/05/11 12:35:25 [0x0-0xd00d]. Com.skype.skype [127] WirelessAttach: IOServiceOpen error: e00002c7
03/05/11 12:35:25 [0x0-0xd00d]. Com.skype.skype [127] WirelessAttach: IOServiceOpen error: e00002c7
03/05/11 12:35:26 [0x0-0xd00d]. Com.skype.skype [127] WirelessAttach: IOServiceOpen error: e00002c7
03/05/11 12:35:26 [0x0-0xd00d]. Com.skype.skype [127] WirelessAttach: IOServiceOpen error: e00002c7
03/05/11 12:35:32 [0x0-0xd00d]. Com.skype.skype [127] WirelessAttach: IOServiceOpen error: e00002c7
03/05/11 12:35:33 [0x0-0xd00d]. Com.skype.skype [127] WirelessAttach: IOServiceOpen error: e00002c7
03/05/11 12:35:33 [0x0-0xd00d]. Com.skype.skype [127] WirelessAttach: IOServiceOpen error: e00002c7
03/05/11 12:36:06 com.apple.WindowServer [64] Tue May 3 12:36:06 MacBook-Pro-17-of-Admin.local WindowServer [64] <error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint () to catch errors logged as They Are.
03/05/11 12:43:39 helpd [160] Response failed Because Listener can not find a port for this QueryID.
03/05/11 12:43:43 helpd [160] Response failed Because Listener can not find a port for this QueryID.
03/05/11 12:43:43 helpd [160] Response failed Because Listener can not find a port for this QueryID.Do you have backups of all the data on the startup drive? If not, do nothing else until you've backed up that data, if you still can.
-
Win 8.1 Encountering PFN_List_Corrupt BSOD while shutting down
Hi there, starting last month my computer began experiencing PFN_List_Corrupt BSODs occasionally while shutting down. I am running Win 8.1. I tried memory search but the system says no error was found. Could someone help me with this? The DMP Files are here: http://1drv.ms/1A7pv3k
Thanks!Hi,
Loading User Symbols
Loading unloaded module list
* Bugcheck Analysis *
Use !analyze -v to get detailed debugging information.
BugCheck 4E, {9a, 218e0c, 6, 2}
*** WARNING: Unable to verify timestamp for igdkmd64.sys
*** ERROR: Module load completed but symbols could not be loaded for igdkmd64.sys
Probably caused by : igdkmd64.sys ( igdkmd64+1c992 )
Followup: MachineOwner
4: kd> !analyze -v
* Bugcheck Analysis *
PFN_LIST_CORRUPT (4e)
Typically caused by drivers passing bad memory descriptor lists (ie: calling
MmUnlockPages twice with the same list, etc). If a kernel debugger is
available get the stack trace.
Arguments:
Arg1: 000000000000009a,
Arg2: 0000000000218e0c
Arg3: 0000000000000006
Arg4: 0000000000000002
Debugging Details:
BUGCHECK_STR: 0x4E_9a
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT
PROCESS_NAME: dwm.exe
CURRENT_IRQL: 2
ANALYSIS_VERSION: 6.3.9600.16384 (debuggers(dbg).130821-1623) amd64fre
LAST_CONTROL_TRANSFER: from fffff80333a17527 to fffff8033396a1a0
STACK_TEXT:
ffffd000`b29a5548 fffff803`33a17527 : 00000000`0000004e 00000000`0000009a 00000000`00218e0c
00000000`00000006 : nt!KeBugCheckEx
ffffd000`b29a5550 fffff803`338691b2 : 00000002`146d2863 00000000`00000020 fffff6f0`00e56998
00000000`00002000 : nt!MiBadRefCount+0x4f
ffffd000`b29a5590 fffff803`33868ea1 : 00000000`00000000 00000000`00000001 00000000`00000010
00000000`00000001 : nt!MiInsertNonPagedPoolOnSlist+0x2e2
ffffd000`b29a55f0 fffff803`33abb3d7 : 00000000`00000000 ffffc000`c13de510 ffffc000`c22e14d0
fffff800`6d4d6956 : nt!MiFreePoolPages+0x5d
ffffd000`b29a5620 fffff803`33abbd0f : ffffe001`c9c61010 ffffe001`ce7027c0 00000000`00000000
00000000`00000002 : nt!ExDeferredFreePool+0x3c7
ffffd000`b29a56a0 fffff800`77301992 : 00000000`00000000 00000000`00000000 ffffe001`ce0d0000
00000000`324d4740 : nt!ExFreePoolWithTag+0x84f
ffffd000`b29a5790 00000000`00000000 : 00000000`00000000 ffffe001`ce0d0000 00000000`324d4740
ffffe001`ce279bb0 : igdkmd64+0x1c992
STACK_COMMAND: kb
FOLLOWUP_IP:
igdkmd64+1c992
fffff800`77301992 ?? ???
SYMBOL_STACK_INDEX: 6
SYMBOL_NAME: igdkmd64+1c992
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: igdkmd64
IMAGE_NAME: igdkmd64.sys
DEBUG_FLR_IMAGE_TIMESTAMP: 52379d96
FAILURE_BUCKET_ID: 0x4E_9a_igdkmd64+1c992
BUCKET_ID: 0x4E_9a_igdkmd64+1c992
ANALYSIS_SOURCE: KM
FAILURE_ID_HASH_STRING: km:0x4e_9a_igdkmd64+1c992
The dump shows that the BSOD is probably caused by : igdkmd64.sys
It is known as Intel Graphic Kernel Mode Driver or belongs to software intel Graphic Accelerator Drivers for Windows.
I suggest you keep the latest version of the driver or software, or reinstall as a test.
Yolanda Zhu
TechNet Community Support -
My Ipad mini was in the middle of an update for the Pintrest app when the upload froze. I tried shutting down the ipad and that seemed to cause it to go into a constant reboot. Now the ipad will not turn on or shut off. Only display the apple sign. Are the any self fix remedies out there to fix this?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Screen turns black and shuts down unexpectedly- help!
screen turns black and shuts down unexpectedly- help!
Try:
iPod touch: Hardware troubleshooting
iOS: Not responding or does not turn on -
My IPhone 3GS JailBroken turns on but shuts off then the black background comes up with white apple logo? And then turns on again? Does it over and over! HELP! Why Does This Happen And Is This Repairable?
Let Me Know! Cheers
Ryan Crawt
[email protected]Its against the forum TOS to talk about J/B phones. you will have to use google to resolve your issue.
-
S890 screen turns off while playing games
I bought this phone a week ago.Everything about this phone is awesom except one thing. The screen turns off while playing games automatically,which is really annoying. Is there any fix for this??
Graphics card springs to mind;
also, in your game settings, in either options or video settings (or similar). Are the settings correct for your card. I know on a low end PC, "full hardware acceleration" can cause crashing.
I'd still think, it's more a graphics related problem. If you have a big flat screen mintor (e.g 24,27 or even 30") then that, in it's own right needs a good card. Add the game to it and you may have problems. I do take it you have compared the specs with what's required on the box (of the game) and "about this mac/"more info"). All the best. -
HT5781 screen turns white while using macbook
screen turns white while using my macbook
Does the situation change by changing the position of the screen?
Which model, year, size and OS are you running? -
My iphone 6 turned off while i was using face time and it returns with the screen saying Hello mean its reset automatically how is this possible ? Now it requires an id and password to activate which i do not remember need help ? but i do remember the id and password which i was using on itunes and Apple store. please i almoost buy it in 890$ so it will be a big lost please help me.
shahzadfromlahore wrote:
Now it requires an id and password to activate which i do not remember need help ? but i do remember the id and password which i was using on itunes and Apple store. please i almoost buy it in 890$ so it will be a big lost please help me
Who set up the phone? Who's Apple ID was used to activate it? -
my bb 9380 won't turn on while the screen shows one battery sign with red cross mark ( not charging sign ), i think the battery drained and switch it for charging but it will show only not charging sign . i bought this phone before 9 months, whats the solution for this ?
Hi and Welcome to the Community!
Please try this sequence...note that, throughout the entire 4h15m process, your BB must remain directly connected to a known-good wall charger (not PC USB, not a cradle):
With the battery inside, connect your BB to the wall charger
Leave it alone for 2 hours, no matter what the LED or the display does
Remove the battery
Wait 15 minutes
Insert the battery
Wait another 2 hours, no matter what the LED or the display does
This has been known to "kick start" some BBs.
It is also possible that your battery or BB has experienced a problem...to test, this sequence is needed:
Obtain an known good and already fully charged additional battery...use it in your BB and see what happens
Obtain access to a known good and identical BB...use your battery in it and see what happens
The results of this will indicate if it's your BB or your battery that has the problem. Note carefully please that "new" and "know good" are not necessarily the same things. While rare, a "new" battery certainly could be defective. Rather, the simplest (and least costly, btw) method to conduct this test is to find someone with an identical BB who has no issues...trade batteries and see what happens.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
My Macbook turns black while active even if sleep mode is not active. it turns on by moving the track pad? Whats wrong with it?
The Mountain Lion installer looks at your internal drive to make certain that it's error-free before continuing installation. You should have an application named "Install OS X Mountain Lion.app" in your Applications folder now so you shouldn't have to download it again. Do this...
Boot to your Lion recovery partition by holding down both the Command and the R keys while booting. Open Disk Utility from the Recovery partition and select your hard drive (usually named "Macintosh HD" unless you've renamed it) and click on Verify Disk. If you come up with any errors, click on Repair Disk. At the end of the cycle you will get a message that the disk was successfully repaired or a message that the hard drive could not be repaired.
If you're able to repair the disk, just reboot as normal and open the "Install OS X Mountain Lion.app" and the installation will proceed. If Disk Utility was unable to repair the disk, you need to get to your local Apple Store as soon as possible so that they can see if the disk is salvageable or beyond repair.
Good luck,
Clinton -
Does Siri give turn by turn directions while on a call?
Does Siri give turn by turn directions while on a call?
If the iPad is cellular 4G.... Yes it does.
iOS 6 features and capabilities vary between devices, with some features available only with certain devices and models.
iPhone
iPad
iPod touch
iOS 6 feature
3GS
4
4S
5
2nd
generation
3rd
generation
4th
generation
iPad
mini
4th
generation
5th
generation
Maps: Flyover
✓
✓
✓
✓
✓
✓
✓
Maps: Turn-by-turn1
✓
✓
✓4
✓4
✓4
✓4
Siri2
✓
✓
✓
✓
✓
✓
Facebook integration
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
Shared Photo Streams
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
Passbook
✓
✓
✓
✓
✓
✓
Camera: Panorama
✓
✓
✓
Camera: Snap stills while recording
✓
FaceTime over cellular3
✓
✓
✓
✓
✓ -
What are the error messages that turns up while working query designer?
hi all,
Can anyone list me out what are the erros turns up while working on query designer. and how to debug it.
Can any one send me docs to my email id [email protected]
thanxs in advance
regds
hariHi Hari,
Error for example:
-. The BW server has deactivated this version of the query designer
-. This version of the query designer is not supported by the BI server
-. Activex component in business explorer selector
regards
@jay -
MY phone turned off while texting battery at 72%. I tried turning it on but screen stays black.
First, try to reset the phone by pressing the sleep and home button for about 10sec, until the Apple logo comes back. You will not lose data by resetting.
If this does not work, connect in recovery mode, explained here:
iOS: Unable to update or restore
Maybe you are looking for
-
I have enablI Firefox's pop-up blocker enabled but I keep getting a pop up ad coming up!
I have a MacBookPro and can't get this Advertisement pop-up to stop - it comes up intermittently on my screen while I'm on the Internet. I also have Mozilla's Web of Trust (WOT) and that also comes up with it prompting me this ad/site has a bad rep.
-
Hi All, Can any on let me know how to create a column in OBIEE answers which gives the row number starting with 1 for each row in the group. similarly for next group the row number should start with 1 and so on. Thanks in advance for your quick res
-
I am not using AD syncronization for resource pool and security groups in Project Server 2010. When I publish a new Project or try to create a Project web site manually it creates the Project site, but fails to synch the resources. If I add or change
-
Regarding background processing of the session
Hi Gurus I have some records in my flat file. While i am doing uploading the file using tc, in foreground it is processing correctly and no issues. While in Background some of the records are not processing properly and in sm35 for those records I
-
Rented 2 movies last night but can't find them as downloaded to sync to my iPad. When I click on the movie again, it says "previosly rented." where can I find the link to download them?