Tusgsten E2 help with installing SDHC 4gb Card. I cant seam to format

null
Post relates to: Tungsten E2

Hello Bean-46 and welcome to the Palm forums.
 The Tungsten E2, out of the box, is not compatible with SDHC cards.  If you are willing to try a third-party add on, PowerSDHC should provide you with the driver you need to access the newer, larger capactiy cards.  I strongly suggest that if you go this route, you download and install the trial first.
Alan G
Post relates to: Treo 755p (Sprint)

Similar Messages

  • Help with installing new graphics card

    Hi I have a 3 year old hpe575a (hp pavillion)
    Intel i7 2600, 8gb ram
    Orginally had a ati hd radeon  2gb (not sure what model)
    in it
    after 2 years the radeon finally melted ( always had overheating problems in the australian summer )
    so I bought a nvidia gtx630m which had the same connections and power requirements and connections as the radeon 
    I csnt seem to get it working, despite the card powering up, and loading the splash screen it doesnt go any further, I can get to the network boot screen or the hp splash screen but no further, and I cant find any bios updates for my mptherboard (pegatron) so do I need a new motherboard? The computer works 100% fine without the new graphics card 
    Should I get a new motherboard. Or graphics card? which would be cheaper? or is there someway to get the current system to work with the new graphics card? thanks -zac 

    Hi,
    The existing card is an "AMD Radeon HD6570 (2 GB)". I don't know how you can fit a Nvidia GTX630M to your machine because this card is for laptop:
         http://www.geforce.com/hardware/notebook-gpus/geforce-gt-630m/specifications
    Probably you are talking about the following card:
        http://www.geforce.com/hardware/desktop-gpus/geforce-gt-630/specifications
    The card should be able to use 300W PSU on your machine (no need new PSU). My suggestion:
    (a) Update BIOS to the latest one, please check, should be "Version7.15 Rev. A" the motherboard is Cleveland
         http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=cp-101150-1&cc=us&dlc=en&lc=en...
    (b) Install driver for new card
    Hope this helps.
    Note: Autumn now but still hot isn't it ?
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Help With Third Party Wireless Cards

    Hello, I am needing some help with third party wireless cards. I have purchased and installed the Linksys WMP54G wireless PCI card into my G4. From what ive seen on the discussions page here, this card is known to work with the G4s in place of the more expensive Airport Extreme card. The only problem is that my G4 doesnt even recognize that the card is in the PCI slot. Ive tryed the other PCI slots and still nothing. Previously, i have tried using a belkin and a d-link card that have been known to work in the G4s as well, and had the same problem. I am 100% sure that the card is seated correctly, and cant think of any other reason why it shouldnt detect that something is in the slot. If anyone can inform me what im doing wrong, or has any info on how to get it working, that would be great. Thanks for your time,
    ~Jared
    Powermac G4   Mac OS X (10.3.8)   2 gb ram, 200 gb hd, dual display

    Yes, i run Digidesigns audio editing program called Protools on my Mac. It uses a PCI card to import mic/line audio signals into the program from the hardware interface. I tried moving the Digidesign card and putting the wireless card in the same slot, and still nothing, although the Digidesign card works fine in the other slots. Each time i moved the Digidesign card, it showed up in the different slots, although the ones that were open did not show up at all. Only the PCI slots that are in use show up in ASP on my machine. I have the FW-800 version of the G4, so im not sure if that makes any difference. I have never erased the PRAM before, would you be able to give me directions on how to do that? Thanks a ton for your help. =)
    Powermac G4   Mac OS X (10.3.8)  

  • Installing Elements 11 on Mac. Need help with install error "Setup wants to make changes."

    Installing Elements 11 on Mac 10.8.2. Need help with install error:  Setup wants to make changes. Type your password to allow this."  After entering Adobe password, nothing happens.  Locked from further installation.  Any ideas?  Adobe phone support could not help.

    Just before letting changes (installation in this case) be made on the system, Mac OS prompts for password & this has to be the Mac system password. This password prompt is the system's own native prompt & would accept the system password only. Please make sure it is the right system password (all/admin rights) and the installaion should run.

  • Help with installing 10.6.3

    Hello, I'm looking for a bit of help with installing Mac OS X 10.6.3 without screwing up.
    I currently have a Macbook with 10.6.3 on it, and I want to COMPLETELY reset my Mac. I want to have a pretty much brand new Mac with 10.6.3, which I have the disk for. I actually just updated from 10.5.8, hoping that it would erase my hard drive and re-install, but it didn't. So I would like help with how to completely reset my Mac, and re-install 10.6.3.
    Thanks in advance!
    ~Dan

    Use that disk, but after booting from it and before running the install, choose Disk Utility from the Utilities menu and erase the drive.
    (75462)

  • HT201195 Who can I call about getting help with redeeming my iTunes card?

    Title is pretty self explanatory: Who can I call about getting help with redeeming my iTunes card?

    There isn't a phone number for iTunes Support, you can contact them via this page (you will probably need to give them images of the front and back of the card, and possibly its receipt) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then iTunes Cards And Codes

  • Hello  I need your help with installing the flash drive into my laptop

    Hi
    I am Rachel Friedman asking for your help with installing the flashdrive player into my laptop.
    Thanks
    Rachel

    To give you any useful advice, I'm going to need to know more about your computer and browser:
    https://forums.adobe.com/message/5249945#5249945

  • MOVED: help with installing 2 os on one hd

    This topic has been moved to Operating Systems.
    help with installing 2 os on one hd

    RedMoose:
    Congratulations on installing an upgraded HDD into your PowerBook.
    I am not sure exactly what happened in the formatting process, but here are some directions that should help:
    Formatting, Partitioning Zeroing a Hard Disk Drive
    Warning! This procedure will destroy all data on your Hard Disk Drive. Be sure you have an up-to-date, tested backup of at least your Users folder and any third party applications you do not want to re-install before attempting this procedure.
    Boot from the install CD holding down the "C" key.
    Select language
    Go to the Utilities menu (Tiger) Installer menu (Panther & earlier) and launch Disk Utility.
    Select your HDD (manufacturer ID) in left side bar.
    Select Partition tab in main panel. (You are about to create a single partition volume.)
    Select number of partition in pull-down menu above Volume diagram.
    (Note: 1 partition is normally better for an internal HDD. External HDDs usually have more than one. See Dr. Smoke’s FAQ Backup and Recovery for tips on partitioning external HDD.)
    Type in name in Name field (usually Macintosh HD)
    Select Volume Format as Mac OS Extended (Journaled)
    Click Partition button at bottom of panel.
    Select Erase tab
    Optional: (Select the sub-volume under Manufacturer ID (usually Macintosh HD).
    Check to be sure your Volume Name and Volume Format are correct.
    Select on Security Options button (Tiger) Options button (Panther & earlier).
    Select Zero all data. (This process will map out bad blocks on your HDD. However, it could take several hours. If you want a quicker method, don't go to Security Options and just click the Erase button.)
    Click OK.
    Click Erase button
    Quit Disk Utility.
    Open installer and begin installation process.
    Please post back with further questions, comments or an update.
    Good luck.
    corneius

  • I am trying to get help with WMPlayer tech support Adobe Reader cant open wmpsupport.htm files why?

    i am trying to get help with WMPlayer tech support Adobe Reader cant open wmpsupport.htm files why?

    Adobe Reader opens PDF files, nothing else.

  • Help me with installing This video card.

    I really need help installing this card.. Everytime I go through installation it says
    "The software that you are installing for this hardware:
    MSI Radeon 9800 PRO Plus
    has not passed Windows Logo testing to verify its compatibility with Windows XP. (Tell me why this is important)
    Continuing your installation of this software may impair or destabilize the correct operation of your system either immediately or in the future. Microsoft strongly recommends that you stop this installation now and contact the hardware vendor for the software that has passed Windows Logo testing.
    Options: Continue anyway or Stop installation"
    I click continue then this is what I get..
    "Setup was unable to complete the installation.
    Try to setup your display adapter with a standard VGA driver before running setup."
    Please, Please, Please help me..

    Is this card an upgrade from something else?  If so, you should uninstall the old drivers from the "add/remove programs" control panel, reboot with the new card plugged in, then hit "cancel" when prompted by Windows for drivers.  Then run the driver installation program.
    As for the "windows logo" question, Windows XP likes to ask for digitally signed drivers as proof that they meet certain criteria set by Microsoft. It's not usually a big deal.
    If you're installing the drivers from your CD, you may want to grab the latest Catalyst drivers from ATI instead http://www.ati.com/support/driver.html

  • Help with Installing flash error- metafile cannot be loaded

    I read the forum on this but it ended last year and there was no response to some recent questions on this and the direct email to the Adobe rep. on there got no response.
    I am having this problem with installing Flash- it gets about 30% of the way and then a message comes up that says the metafile cannot be loaded.
    I am running 10.7.5 on Mac, all browser software is current. I use both Safari and Chrome. After it said Flash was out of date I tried to update but got the metafile error. So I uninstalled Flash to install it fresh but the same error came up. I tried everything recommended from the forum. I also did all the steps from the help list direct from Adobe ( deleting Flash files, folders, rebooting, etc.) The offline link Adobe provides says the "file cannot be found" so I can't download that either. So I tried the online link download, but even after doing all the steps in order etc. I still get the error when I try to install it.
    I have no firewall and have no virus software running. I also tried the direct offline links that others have provided from 2013, (unfortunately they are old)  in both clicking on them and also downloading by right click but they are dead links and even  the download for it has no content.
    Any help that is more recent than last year? If this is in the wrong place, apologies. New to the forum.

    I tried all solutions but one posted in adobe support. I am local administrator but IE security settings are set by group policies and buttons in tools security setting are grayed out.
    After three days with "The ActiveX control for Flash Player could not be registered" message I tried registering the activeX control manually.
    Bingo! that made the trick.
    So open a DOS window, type "regsvr32.exe C:\WINDOWS\system32\Macromed\Flash\Flash10d.ocx" -first check if this directory exists and contains the Flash10d.ocx (no quotes needed) and you should receive a confirmation that it registered correctly.
    I must say that I've tried so many ways that I cannot repeat the correct order before this has worked ;-(
    Hope it works for you all

  • Pl. help me install a PCI card in a solaris 2.6 system

    Hello,
    I am working on a cpci chassis with Sun CP1400 processor card running Solaris 2.6. I am trying to install a voip card from AudioCodes. After installing the driver, and the card, the software doesn't seem to recognize the board.
    I ran "show-devs" from the ok prompt. It doesn't list the card. Also, there is no entry for the driver in /etc/driver_aliases. I am not sure if the board is faulty, or the driver is not properly installed.
    The driver.conf indicates its a pseudo driver (I dont know if this makes any difference). When I run pci_scan that came with the driver it listed a device on the bus with vendor id = 0x10b5. I think this is the plx chip on the card. But I don't see any AudioCodes vendor, and device ids in the list.
    Thanks for your time.
    Sridhar
    [email protected]

    It is possible that this card may not be compatible with this Solaris
    system.
    You may want to check these sites out for driver related information:
    http://soldc.sun.com/developer/support/driver/
    http://soldc.sun.com/developer/support/driver/IO_kit/PCI.html
    Thx
    Tushar Patel.

  • Help with installing pre-requisite packages on Red Hat Linux

    Having issue with installing packages with yum
    OS is RHEL 6 and following package which are prerequisites for Oracle Fusion Middleware install on Red Hat Linux 6
    uname details as follows
    2.6.32-220.el6.x86_64 #1 SMP Wed Nov 9 08:03:13 EST 2011 x86_64 x86_64 x86_64 GNU/Linux
    Example error: yum install gives error as follows for all packages.
    No package compat-libcap1-1.10-1 available
    Need to install following packages (as mentioned in the prerequisites)
    binutils-2.20.51.0.2-5.28.el6
    compat-libcap1-1.10-1
    compat-libstdc++-33-3.2.3-69.el6 for x86_64
    compat-libstdc++-33-3.2.3-69.el6 for i686
    gcc-4.4.4-13.el6
    gcc-c++-4.4.4-13.el6
    glibc-2.12-1.7.el6 for x86_64
    glibc-2.12-1.7.el6 for i686
    glibc-devel-2.12-1.7.el6 for i686
    libaio-0.3.107-10.el6
    libaio-devel-0.3.107-10.el6
    libgcc-4.4.4-13.el6
    libstdc++-4.4.4-13.el6 for x86_64
    libstdc++-4.4.4-13.el6 for i686
    libstdc++-devel-4.4.4-13.el6
    libXext for i686
    libXtst for i686
    FYI: If this forum is not appropriate please let me know appropriate forum and shall repost there.

    Hey,
    Normally I use YUM : http://taliphakanozturken.wordpress.com/2012/03/17/how-to-use-yum-to-install-rpm-packages-with-dependencies/
    Let me know if this is what are you looking for.
    I hope it helps you,
    Thiago Leoncio.

  • Help with installing CS2 in Snow Leopard

    Can anyone help me with installing CS2 on a MacBook running OSX Snow Leopard? I have trouble with activating the product and get a splach screen with a monkey element or  logo rather than the adobe logos... confusion reigns!

    Hi Rory, be aware that running CS2 products on Snow Leopard isn't going to be a supported combination. Here's a related thread: http://forums.adobe.com/thread/499253. Apparently some customers have been able to run CS2 software on Snow Leopard. You can also check with our chat support at http://adobe.ly/v6wfLL. However, I can't be certain that they'll be able to assist you. You might want to consider upgrading.

  • Need help with installing old version of firmware

    I would like to revert to an old version of firmware for my Airport Extreme base station. I have read in a number of postings that this would possibly help with the problem of my Canon Pixma ip3000 not working after the firmware was usdated. When I tried to install the old firmware, the Installer would not allow it, there was just a message that the software was up to date. Could anyone please give a step by step description of how this can be done? Is there a way around the Installer? Thanks.

    The firmware supplied with the base station was 4.1. After installing it, everything worked just fine, including wireless printing to a Canon Pixma ip3000. At one point, after being prompted by a message onscreen to upgrade to 4.2, I did the download and installation, and that is when all the problems started. No wireless printing, and I can't seem to use the Airport Admin or Assistant (not responding). Since then I have also upgraded the OS to 10.4.5.
    I am trying to downgrade to 4.1 since that is what worked initially and what was suggested in another posting I read.
    I did look at the information for the various parts of Airport and noticed that the Setup Asistant is 4.2, the Admin Utility is 4.2 and the base station is 5.5.1. Could this be affecting the problem as well?
    I will try downgrading using the link you provided. Thanks very much.

Maybe you are looking for