Tutorial content areas don't appear

After installing tutorial examples, can't see content ereas for TUTORIAL30_APPLICATION.
Can somebody help me.
Thaks.

Have you tried setting the EUL in Desktop. I think it's under Tool-> Options -> EUL tab. You should have only one EUL but you might have more.

Similar Messages

Content Area doesn't appear although Import Successful

I am testing an export/import of some Portal objects to prepare for a migration from development to production. I am using Portal 3.0.9.8.3. I am exporting using Doc ID: 146645.1 as a guide (exporting and importing in the documented order). Everything indicates a successful Export/Import. Both the export and import logs show records being exported and records being imported with the message "Import terminated successfully without warnings." in both logs. When I get back into Portal on the Prod machine, the Content Area and Page are not there. Also, the tables which indicated records being imported by the import log file, have no rows in them. What's going wrong?
John

I have this same problem. I am trying to export/import certain parts of my development portal to my production version. I have successfully run the scripts to export a content area from my development machine and then sucessfully ran the import script on my production machine. Yet I can't see the content area on my production version. I suspect this is because the two portals have different DAD's. The development DAD is crp1_portal30. The production DAD is imsi_portal30. I have tried going into the Listener Gateway Settings Page, but it comes up asking for authentication. I have tried every username/password in the system and can't get in.
1. What is the default username/password for this. We didn't set this up. It was set up by 11i Rapid Install.
2. Do you think that's why my content area won't show up?
3. How can I create a new instance of portal, i.e. have multiple portals on the same machine.

Blank content area page - hide

I created a form in Adobe Designer and my content area page is appearing as page 1 when I'm in PDF view - I've never had this happen and I can't delete or move the page (form MUST have one content area). It was interesting because I had 7 pages in my form - everything was fine until I decided to move page 7 to the top (becoming page 1) - from then on my content area page began appearing....any help out there on how i can "hide" this blank page?? Thanks! Lisa

Hi Lisa,
I actually had to make the form work today, so unfortunately, I had to start over and not move any part around to make sure I didn't get the blank second page.
Now, the client just notified me that they don't want email submissions so I am off to find out how to se tup teh HTTP side.
Sorry I am not more help :-(
Jill

Content area & search portlet

Hi Everyone,
I have a couple questions and hope that some of you can give me some insight, thank you so much in advance!
I need to implement a search portlet. I realized that there is one built-in portlet that came with the 9iAS. But it does not provide all the functionalities that I need. For example, I would like it to be customizable, therefore the drop-down-list lists only the content areas customized by the users and it only searches in those areas.
Here are the questions:
1) It seems that the built-in Search portlet uses the database provider. am I right? Where can I find its provider and also its jar files (I am guessing it is written in Java).
2) If I have to write my own Search portlet, then I need to get the information about the content area such as which table the content area objects are saved to and how many content areas and in the area etc...
Any insight will be greatly appreciated.
Thanks,
Vince

There are some secure views that are available as part of the Pl/Sql PDK. They are listed here:
http://portalstudio.oracle.com/pls/ops/docs/FOLDER/COMMUNITY/PDK/plsql/doc/sdk23vws.htm
The views work by using information from the session context (see the wwctx_api package). Typically the session context will be set automatically by the portal framework if the request comes to the Portal Database via mod_plsql or the PPE.
To find the content areas in which the user has access to folders, you'll need to join the WWSBR_ALL_CONTENT_AREAS view with the WWSBR_USER_FOLDERS using the ID and CAID columns, respectively.
Content Areas don't have descriptions so a presume you meant the display name rather than the unique name. The display name can be found from the WWSBR_USER_FOLDERS view be joining WWSBR_ALL_CONTENT_AREAS to WWSBR_USER_FOLDERS again but choosing the root folder (select id, caid, language, display_name from WWSBR_USER_FOLDERS.ID = 1). You'll also need to restrict by language.
Please write again if you need more info.

Bridge: Images don't appear in Content Folder

(iMac OS X 10.5.2 (Leopard); 4 GB Ram; PS CS 3; Bridge 2.1.1.9; Raw 4.3.1)
All my images are on the MacIntosh hard drive under Cover Flow view. In Bridge, there are two main folders that contain images:: Window Documents ( deleted images from a color management program from a external hard drive/PC computer that I previously owned)) and Pictures (images transferred from PC to MAC). Problem: No images appear from the Window Documents Folder in the Content Pane in Bridge. Most images don't appear on the Content Pane from the Pictures folder with the exception of a few file folders. In the Preview Pane (Bridge) there are all sort of weird glitches. Previous to this problem I worked 7 1/2 hours dragging and dropping images from files in the Window Document Folder into selected folders in Pictures and deleting the images to Trash that weren't going to be kept. Everything ended well that day....no problems but the next day when I opened Bridge I couldn't access most of my images. At the bottom left hand corner of Bridge it tells me how many images there are but they don't appear. Summary: What I do know is that the images are on the hard drive, my computer is trying to open them up but something is preventing them from appearing in the Content Pane. Before I reach for that second glass of wine, can you please help? I am so frustrated and don't know where to turn for help in this matter. Thank you so very much. PS. I also can find the images in Finder when I right click on the mouse button on a file. I've tried using Tools>;Cache>Build and Export Cache. Images will appear but after I close Bridge they disappear into their deep dark hole!

Solved the problem myself. I retyped the name of each folder (same name) under Pictures and added a space plus #1 after each folder name. Images appeared almost immediately on the content pane after that was done. Later I will then open up on my hard drive, under Cover Flow, two windows....one from the Pictures Folder and the other one from the Window Documents that contain the images transferred from an old hard drive. I will then select the images I want to keep and drag and drop the images from the Window Documents to the sub-folders in Pictures and that should do it. Attempting to do it from within Bridge will cause the images in Pictures to disappear so this other way is safer. Then I will trash my Window Document folder when I'm done. If anyone has experience this problem this might be a way to see if my solution might work for you. (I formerly had a window system and now have a iMac).

Top level navigation appearing below the content area

Hi ,
I have modified the standard look and feel of the portal . We have our own masthead now and a custom footer as well . The problem is the top level navigation is appearing below the content area . I presume that there is a possibility of arranging the ordering of all the different objects in a frameworkpage . How can this be done ? Please help .
Regards
Deepak Singh

Hi ,
I just checked the layout . It is using the framework page layout as the default layout .I am using NWDS for 2004s . Now if I need to change the order of appearance of one of my components which are
desktop inner page
top level navigation
masthead
footer
How do I change it ? Do i need to modify any property for these components like the sort priority or the merge property etc for the same ?
Regards
Deepak Singh

Images on Robohelp are very poor quality/blurry or don't appear at all

Hello,
Any help on this problem would be greatly appreciated as I have been attempting to solve this for several hours a day for the past week.
I have a simple employee handbook in word (about 20 pages with images) that I’m trying to turn into an html-based document. I've tried a couple if things in order to get this file into robohelp. I've linked the word document to RoboHelp and worked with that, and I've also imported the word doc into framemaker and then linke my framemaker document to Robohelp.
I’ve managed to create the html version with a table of contents doing it both ways, but there are a few images in the word document that turn out really bad in the html version. They look fine in the word document and in pdf version, but when I view them in RoboHelp or in the html version of the document they’re very blurry and choppy. It almost looks as it pixels are missing. I’ve tried everything I could think of but nothing changes the quality of the image. As soon as I link the word document or framemaker document, when I click "view" on the specific image, or just view it from the handbook in Robohelp the image looks terrible.
Someone suggested that I checkmark "do not re-generate image" under project settings but now some of my images aren't appearing at all. All of my images are the same type but I've also tried changing it to png, or bmp, jpeg but nothing changes. They're either blurry or don't appear at all.
Thanks for any help or suggestions!

I don't know if this will help you, but I've had issues with poor image quality when importing Word documents into RH7. I see a fuzziness problem with most images--screen shot or not--but it seems really pronounced if the image in Word is reduced to less than 100%. To resolve this, I've opted to manually copy any Word images to another application (I use SnagIt), save them at 100% to PNG format (JPG and GIFs also work), and import the saved image files to Robohelp. That sounds like that's what you ended up doing with Photoshop.
Also, I wonder if it makes a difference how much the text was magnified/reduced when they took the original screen shots. I just did an experiment--using SnagIt, I took a screen capture of a block of text at 100% magnification. I then pasted the screen shot directly from SnagIt into my Robohelp document. It came in perfectly clean--couldn't see any obvious difference between the Robohelp text and the image of the Word text. I got the same results when I saved the screen capture to a PNG file and imported it that way. That leads me to believe the problem you're seeing is a result of having Word images automatically converted to RH.
(In the example--unfortunately hard to see-- the text in the red box is from a screen capture; the rest of the text was entered in RH8--there's no discernable difference in quality.)

The 'Edit folder' link doesn't appear in content area portlet (URGENT)

Hi! I made three content areas, and published them as portlets in a page. However, when I enter the page as an authorized user, I don't see the 'Edit folder' link on any content area portlet. But if I enter to any of the content area pages with the same user, I see the link
Is this a bug? What could be the reason?
Thanks a lot!
Luis

try this...
Edit the page where you added the portlets. Click the edit defaults link next to each of the portlets and scroll down to make sure the show Edit Link checkbox is checked. I don4t see any Edit Link checkbox when I edit the portlet's defaults!!
What should it be?

HT1386 I cannot get apps I purchased now sitting on my pc onto my iphone. They were there before I upgraded to 6.0.1. I backed them up on my pc and I can see the apps are all there. But after syncing they still don't appear on my phone.

I cannot get apps I purchased now sitting on my pc onto my iphone. They were there before I upgraded to 6.0.1. I backed them up on my pc and I can see the apps are all there. But after syncing they still don't appear on my phone.

You may have to try deleting all the music from your phone (by going to Settings>General>Usage>Music, swipping All Music and tapping Delete), then sync it all back on with iTunes in order to fix this.

When I try to down load any apps the screen shows -example you tube app can't down load this time. This is appearing every time on the screen and options are Done/reentry please do my favour.

When I try to down load any apps the screen shows -example you tube app can't down load this time. This is appearing every time on the screen and options are Done/reentry please do my favour.

This query seems to be related to Edge Code. you can get help from this forum.
Also EdgeCode doesn't have troubleshooting page but you can get help from Brackets trouble shooting page.

Moving LR files between disk folders that don't appear in Navigator but are in other LR catalogs

I want to move LR files from one disk folder to another. The folders don't appear in the Navigator with the current catalog open.
I can't navigate the disk hierarchy to find the other folders. I'm guessing that I need to open each catalog and move the files it's aware of, then open a different catalog and repeat. Is this correct? Would this assure that each catalog knows the locations of its own moved files?
I was hoping there's a way to avoid combining catalogs at this time. Perhaps in the future I'd combine some or all of them
Am I missing anything?
Thanks.

Ian,
With CS3, I think you'll have to render your images as TIFF or PSD on their way to Photoshop. I'm pretty sure that the local adjustments weren't handled until the Camera Raw that came with CS4.
There's an easy way to tell if that's the case. Open a raw file in your PS3 Camera Raw and see if there are local adjustments available.
Hal

HT1391 I purchased 3 new tv episodes on iTunes and downloaded them on my iPad, from iCloud. They don't appear on my iPad Videos app and I've tried downloading them several times. Where are they?

I purchased 3 new tv episodes on iTunes and downloaded them on my iPad, from iCloud. They don't appear on my iPad Videos app and I've tried downloading them several times. Where are they?

The question is not only how to to hide them, but also how to mark them as watched!

Adobe Muse. Pink color appeared in the content Area

The content Area in muse 2014 shows this pink tint. It only appears in the platform not when i preview in browser. Anybody else has had the same problem, can I fix it??
tx

Go to View -> Hide Grid Overlay.

Hi, I have recently updated my OS X to Maverick. when I did, my mail programme (Mail) will not open - for me only. There are 4 other users of the iMac, and they don't appear to have any problems.

Hi, I have recently updated my OS X to Maverick. when I did, my mail programme (Mail) will not open - for me only. There are 4 other users of the iMac, and they don't appear to have any problems.

First, Safe Boot , (holding Shift key down at bootup), use Disk Utility from there to Repair Permissions, test if things work OK in Safe Mode.
Then move these files to the Desktop for now...
/Users/YourUserName/Library/Preferences/com.apple.finder.plist
/Users/YourUserName/Library/Preferences/com.apple.systempreferences.plist
/Users/YourUserName/Library/Preferences/com.apple.desktop.plist
/Users/YourUserName/Library/Preferences/com.apple.recentitems.plist
Reboot & test.
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.

Why is it that when I connect my iPod to my car stereo through USB, some of the songs don't appear and play when these songs are on my playlist normally?

Hello all
This has been bugging me for a little while. I bought myself a new bluray player awhile back and it has a USB hookup for ipods. This goes the same with my vehicle too. I have a few good playlists with some great songs, however, when i hooked it up to my bluray player, some of the songs didn't appear in the playlist that are not normally there. I disconnected the ipod and had a look on the screen and sure enough the songs are there, but they are just not appearing on the bluray player. This only happens for some songs, not all of them. I was disappointed at this because I really wanted to hear my songs. So I decided to download the WHOLE album off of itunes from which I got the song from and sure enough, this time the song appeared on my bluray player and it played in the playlist.
Why is this? Is there a way to make it so that I can have all the songs play without downloading all of the albums?

Did the original songs that do not appear on the car player play in the Music app on the iPod? Sometimes glitches happen and they do not. Also, If y ohave a 5G iPod/iOS 7, purchase songs will show with an cloud icon by them if they are not downloaded if Shall All is turned on in Settings>iTunes and App Store

Tutorial content areas don't appear

Similar Messages

Maybe you are looking for