Tutorial for making a Flash Tutorial

I would like to find a tutorial on how to make a Flash
Tutorial like
this
one or something similar.
Any help would be greatly appreciated!

http://www.adobe.com/products/captivate/
Dan Mode
--> Adobe Community Expert
*Flash Helps*
http://www.smithmediafusion.com/blog/?cat=11
*THE online Radio*
http://www.tornadostream.com
<--check this
*Must Read*
http://www.smithmediafusion.com/blog
"jackie_dec" <[email protected]> wrote in
message
news:esk3bo$3jq$[email protected]..
>I would like to find a tutorial on how to make a Flash
Tutorial like
>
http://www.alwaysonline.net/demos/DirectAdmin/Add%20New%20Domain.htm
or
> something similar.
>
> Any help would be greatly appreciated!
>

Similar Messages

Strings panel tutorial for english spanish flash website

Greetings everyone,
where can i find a good strings panel for multiple language
flash website set up?
thanks in advance!!

i am looking for a tutorial. failed to mention this in my
initial post.

Were can I find a good turtorial for making a contact scheme in flash?

I am making a flash site, and wonder were I can find a good turtorial for making a contact scheme, where people can answer questions who is sent to my email.

Just search Google using the terms "AS3 contact tutorial" and you should find a few good tutorials.

Good Resources for making Flash Games?

I'm new to Flash, and I'm working on getting through a book on the basics. What I'm wondering though is, are there any good resources out there for making games in Flash CS4. I know I'm going to get some "learn the basics first" replies, and yes I know I need to get a solid grounding in those, but I want to be able to start gathering resources, and look ahead to what I'll be able to do with Flash in the future.
By resources I mean books, other websites, your own advice about game making, etc...

i started developing in flash about 2 weeks ago for the same reason and have written a little animation and started writing a multiplayer game, which will be fully functional and properly skinned soon. If you are like me, you have a vague understanding of object oriented programming, know at least one other programming language and can adapt to all this event-driven stuff. Here's my story in brief.
I started with some dev center videos and then went to AdobeTV for more videos, especially to newbie channels like Douge Winnie's. I think I also played along with some flash down under videos to learn more action script 3 (very important in a game, I would say).
I'm sure you want to get onto your game project right away, but you are probably 3-5 mini projects away from that. If you don't do some toy projects you'll just end up doing a crappy job on your game or plain old getting stuck. The mini projects, whether they are elements of your game, or exercises in videos, will force you to find the ressources you need to learn from.
If you want to make a multiplayer game, try smartfoxserver - it is very well documented with little tutorials and stuff. Some tutorials on
this youtube channel too (where he mostly just runs you through the documentation). Smartfox has a few good examples of nicely built interactive programs. Just make sure you are using their actionscript 3.0 stuff.
Lastly, understand and use Components. They will save you a lot of work. smartfoxserver has components (called bits) and so does flash. I imagine you can even download extra components. These are things like scrolling text boxes, buttons that look like buttons, etc.
Cheers,
Alejandro

Once I create a html5 animation using the 'Toolkit for CreateJS' in flash, how do I then insert it..

Once I create a html5 animation using the 'Toolkit for CreateJS' in flash, how do I then insert it into a webpage via Dreamweaver:
This has been sending me round in circles for over a week - can anyone let me know how I do this or can they point me in the direction of a tutorial? Thank you in advance - d;-)

There are some tutorials on Adobe site:
<http://www.adobe.com/devnet/createjs/articles/getting-started.html>
<http://tv.adobe.com/watch/adc-presents/toolkit-for-createjs-part-1-designing-game-assets/>
<http://tv.adobe.com/watch/adc-presents/toolkit-for-createjs-part-2-adding-game-interactivi ty/>
The parts 1 and 2 are videos about 10 minutes each while the first link is a detailed article that you can print and practice on your machine.
Hope this helps.

NEED step-by-step instructions for making a podcast

Please help. In desperate need of step-by-step instructions for making a podcast, along with "posting it to a publicly accessible RSS/URL thing." I do not speak nerd fluently. Understand it partially, but VERYpartially.

"Step-by-step instructions" will depend on what software you're going to use.
Here's a tutorial using the free Audacity software on Windows...
http://www.zefhemel.com/archives/2004/10/11/how-to-create-your-own-podcasting-sh ow
Here's Audacity...
http://audacity.sourceforge.net/about/
WinJournal is an alternative software package for Windows...
http://www.marinersoftware.com/sitepage.php?page=114
WebPod Studio is another...
http://www.lionhardt.ca/wps/
Also Propaganda...
http://www.makepropaganda.com/
For easy publishing of your podcast there's this...
http://www.avmypodcast.com/
And talking of propaganda, if you can switch to Mac, it comes with the iLife suite of programs which includes GarageBand for creating podcasts and iWeb website creation software. IWeb has integrated support for podcasting and publishing to the iTunes store:
http://www.apple.com/support/iweb/blogs/
Apart from Apple's software, there's also this for Mac...
http://www.lemonzdream.com/podcastmaker/

I NEED HELP! Making a flash email form using php.

Hi, my name is Sean, I'm making a flash contact form using php for a website.
I'm having a hard time with the php. Can some one help?
Click here to download my source.

Satellite A505-S6005
ACPI Flash BIOS version 1.40 for Satellite A500/A505 (PSAT6U/PSAT9U)
When you execute the download file (sat6v140.exe) it decompresses into several files in the sat6v140 folder.
Among those, is the readme.txt attached, which explains how to create the CD.
Burn a CD or DVD from an ISO file
-Jerry
Attachments:
readme.txt ‏14 KB

Looking for a software solution like "Ceros" for making HTML5 interactive online magazines?

Does Adobe CC have at solution for making HTML5 interactive online magazines? (not a FLASH solution from indesign)

I don't know what the quark plugin does, I'm guessing that it is reading from an external file that contains the price information. An ordinary method of dealing with updatable information in Flash is to use an external file, usually in .xml format. You can update the xml file or have your database do it for you, and then every time a user hits your site, the data is read from the .xml file. Each user will get the latest prices.

App for making And splitting audio recording (iphone 4)

Is there a good app for making AND splitting an audio recording?
I just want an app that I can use at work to record meetings and interviews.
And when I am done listening to half of a track, I want to be able to split it and delete the first half.
A search of the web was not useful.
Any recommendations?
Thanks.
mac

Hi,
It is possible to limit the app to specific device features. For example if you require camera access or better graphics support, you can use UIRequiredDeviceCapabilities and add it to your -app.xml file.
Here's info on what values you can set for this key: http://developer.apple.com/library/ios/#documentation/General/Reference/InfoPlistKeyRefere nce/Articles/iPhoneOSKeys.html
Within the -app.xml file there is a tag called <iPhone> and inside there is another called <InfoAdditions> There you see where it sets the value for UIDeviceFamily. Below the UIDeviceFamily tag you can add the UIRequiredDeviceCapabilities tag.
For example if you require front camera support you would add:
<key>UIRequiredDeviceCapabilities</key>
<dict>
<key>front-facing-camera</key>
<true/>
</dict>
Note that when you edit the -app.xml file, it may be overwritten if you use something like Flash CS5 extension where it updates the file when you change values in the iOS properties panel.
Good luck,
iBrent

A script in this movie is making Adobe Flash Player 10 to run slowly

How do I fix this? A script in this movie is making Adobe Flash Player 10 to run slowly, this is my problem when watching ABC tv shows. I've got a 13" Macbook Pro i7 with 8g of Ram. What do you all think is the problem

I get this message which I interpret as saying what it means, the streaming/scripting is to slow to operate that site.
In my case I was gaming(poker) I stopped for a meal and parked at the home page of the site (Skypoker) I went to rejoin a table and got the error. When I picked YES the screen went into some sort rapid fast loop, when I picked NO it dumped me out completely from the entire site and closed it. Now I have used this site with no problems at all, I contacted Sky support and he suggested delect temp files, history and reboot--did this no good. I decided to do a complete scan just in case, no better. I then decided to RESTORE by a couple of days, this worked but only the once, when I again left and tried to go back same problem.
What mystifies me is nothing altered or changed on the pc or on the site (they asked me to make sure I had version 10 Adobe Flash). So I decided do download again which I did but had no effect. Clearly i can't keep on doing restore but why the problem have suddenly arose is still baffeling. 1. why bother with such an error warning if there is no solution or choice of causes to go through to investigate and or fix. 2. If speed is an issue at this point why doesn't the error quantify the problem or Adobe give us a device to measure the errant data stream instead of leaving us high and dry with an effect, probable reason but no supporting data.
Sky appear stumped but obviously they are using Adobe on a commecial footing, I have asked them if they will seek support as so far there seems to be a don't care can't be bothered from Adobe, very disappointing

Best practice for making a report of 10,000 to 20,000 rows(OBIEE 10.3.4.1)

My Scenario is like this:*
Hi i have 2 fact tables fact1 and fact 2 and four dimension tables D1,D2,D3 ,D4 & D1.1 ,D1.2 the relations in the data model is like this :
NOTE: D1.1 and D1.2 are derived from D1 So D1 might be snow Flake.
[( D1.. 1:M..> Fact 1 , D1.. 1:M..> Fact 2 ), (D2.. 1:M..> Fact 1 , D2.. 1:M..> Fact 2 ), ( D3.. 1: M.> Fact 1 , D3.. 1:M..> Fact 2 ),( D4.. 1:M..> Fact 1 , D4 ... 1:M..> Fact 2 )]
Now from D1 there is a child level like this: [D1 --(1:M)..> D1.1 and from D1.1.. 1:M..> D1.2.. 1:M..> D4]
Please help me in modeling these for making a report of 10,000 rows and also let me know for which tables do i need to enable cache?
PS: There shouldn't be performance issue so please help me in modeling this.
Thanks in Advance for the Experts who are helping me for a while.

Shudn't be much problem with just these many rows...
Model something like this only Re: URGENT MODELING SNOW FLAKE SCHEMA
There are various ways of handling performance issues if any in OBIEE.
Go for caching strategy for complete warehouse. Make sure to purge it after every data load..If you have aggr calculations at higher level then you can also go for aggregated tables in OBIEE for better performance.
http://www.rittmanmead.com/2007/10/using-the-obiee-aggregate-persistence-wizard/
Hope this is clear...Go ahead with actual implementation and lets us know incase you encounter any major issues.
Cheers

Can FI-CAx be used for making outgoing payments to business partners

Hi All,
Can we use the installment plan in FI-CA for the outgoing payments to business partners. Our company has lot of lease contracts and these contracts have payments due to be paid on a monthly, quarterly, semi-annual, and annual basis. All these lease contracts are managed in SAP Real estate Flexible objects. We want to use FI-CAx for making payments to these contracts and hence we are looking for integration between FI-CA and RE-flexible objects.
From what I heard FI-CA is a receivables module and is not best suited for payables, so please let me know if we can use the outgoing payment plan and installment plan in FI-CA for making payments to business partners.
This is a bottleneck in our implementation. So please help me asap.
Thanks in advance. Points will be awarded to all the useful solutions.
Santosh

Hi Santhosh,
FYI my answers below
Can we use the instalment plan in FI-CA for the outgoing payments to business partners.
u2022I would say Yeah. ofcourse there is a way to do it provided you have created existing OI in Real estate in FI-CAX. This is because, weu2019d Refund money to the customer. In the same token I do not see any problem in paying monies to them!!!!
u2022You need to create your RE-FX contracts unto FICA as Contract Accounts <1:1 ratio>.
Our company has lot of lease contracts and these contracts have payments due to be paid on a monthly, quarterly, semi-annual, and annual basis. All these lease contracts are managed in SAP Real estate Flexible objects. We want to use FI-CAx for making payments to these contracts and hence we are looking for integration between FI-CA and RE-flexible objects.
u2022Assuming that you have your RE-Fx data unto FICA, next step is to configure Instalment plans < monthly, quarterly, semi-annual, and annual >.
u2022Next you create Instalment plans for the contract accounts <FICA> as required.
u2022Now, if you want to pay the amount, you need to attach outgoing payment method in Contract Account, Configure your Payment program.
u2022Now run your Payment Run <FPY1 =4.72; FPYS = ECC>.
u2022All the OI would be cleared. If you want to send the file to the bank, you can do so or you can also issue cheques.
From what I heard FI-CA is a receivables module and is not best suited for payables, so please let me know if we can use the outgoing payment plan and instalment plan in FI-CA for making payments to business partners.
u2022Look above.
OI = Open Item
Other points you need to consider:
1. Are the amounts in RE-FX consistent <equal through out the installment plans>?
2. Do you want to create separate Installment plans in FICA?
3. If yes, above should be helpful.
4. If not, identify an Interface between RE-FX and FICA.
5. What are your plans to close the Contracts in RE-FX once all the Installment plans are being paid in FICA?
6. Do you want to establish an Interface between RE-FX and FICA so that data would be transferred bt them automatically?
7.Is point no 6 one way or 2 ways <i.e RE-FX to FICA and vice versa>
8. What is the volume and frequency?
9.Other points if any
Does this helps?
Rgds
Rajendra

How to create a multiplayer game for steam using flash/flex?

Hi guys,
We've got a multiplayer game ready to go. Currently it is not multiplayer, but we'd like to get it to a stage where it can be played over the steam network by users of steam and owners of steam games.
We'd like to if anyone could briefly give us a breakdown of how to get out game up on steam and available for multiplayer?
Does steam host servers, and can we utilise a steam server to transfer data between players or would we have to run our own server?
Currently were using flash builder to publish via adobe air to a windows desktop exe. Can anyone briefly explain how - once a player has downloaded the game from steam we can connect two players? Does anyone know how to use actionscript 3 to access steam network?
Anyone have any experience developing multiplayer turn based game for steam using flash /actionscript 3 /adobe air?
Thanks for your help in advance,
i

You would want to use the SteamWorks API, which is available from Steam as a C++ library, but there is most likely an Adobe Native Extension (ANE) that would allow you to use the library in AS3.
I've never used SteamWorks but it seems to support peer-2-peer matchmaking (in other words, you wouldn't even need your own server, I think.)
SteamWorks API:
https://partner.steamgames.com/documentation/api
Search results for "SteamWorks AIR ANE":
https://www.google.com/search?q=steamworks+air+ane
-Aaron

PDF Form javascript for making readonly field by using button

Please let me know the PDF Form JavaScript for making selected fields(Text field,Drop down list,..) as read-only by using Button.

Do you want your button to be made read only?
One starts with Acrobat JS Reference.
// make all fields in a form read only;
var oField; // variable for field being processed;
// loop through the form fields;
for (var i = 0; i < this.numFields; i++) {
// process each field name;
oField = this.getField(this.getNthFieldName(i)).readonly = true;

!!!How to restrict user for making changes in Sales order , partner level

Hi all,
Can anybody tell me how to restrict user for making changes in Sales order at partner level, is it through user exit?

Hi Ruchi
I hope u had gone to the screen fields which u want them not to be editable. So there u select all the fields contents which u do not want to to be changed and check the boxes with W.content and Display and save it. Once evrything is done u have to activate the particular transcation going in to the standard variants and put the name and click the activate button.
Hope its clear
Reward if help ful
Sri

Tutorial for making a Flash Tutorial

Similar Messages

Maybe you are looking for