Tutorial for pages

Video tutorials for Pages are where?
Thanks, . . . Bill.

Pages v5.5.2 is the current revision, and a version specific help link is here. There is no tutorial, or manual available for the Pages v5 series. It was never designed to be a replacement for MS Publisher.
If you want to open MS Publisher documents on the Mac, consider the free LibreOffice Suite, whose word processing/layout features more closely rival or exceed MS Word than those found in Pages. LibreOffice Writer actually has a substantial manual written in LibreOffice Writer itself. Only Pages v5.5.2 can open its documents directly, without exports in other formats.

Similar Messages

In the Apps "Pages" is there a tutorial for the Business Cards Templet?

In the Apps "Pages" is there a tutorial for the Business Card Templet?

Peter I see you are humble, as my self. I don't see a way to easily fill all the individual cards on the templet. Pages '09 version 4.1 (923)
I first started using Business Card Templets with Microsoft Publisher back in 2000. Initially I filled out a business card and was given a choice to print 8 or 10 cards to a page. Since then I have been out of the loop due to illness, Pages '09 give me the choice to print 8 and 10 cards to a page but I'm missing the initial step. laughing about it but confused too

Can someone direct me to a full in depth tutorial for an E-commerce page?

Can someone direct me to a full in depth tutorial for an E-commerce page?
I am currently trying to build two E-commerce pages and it would be really nice to have acces to someone who knows what they are doing.

Hi,
Please refer to the following link http://forums.adobe.com/message/4513077#4513077
Regards,
Aish

Tutorial for managing bookmarks in iPhone environment?

I hate asking newbie questions but here goes. Searched for this but found threads regarding desktop environment.
When I open Safari on my iPhone 3CS, I see bookmarks imported from my pc when I synched. Don't need all those so deleted most. Here's the problem: if I type in a new address in Safari addres field at top, and go to that page, then do Add Bookmark, it doesn't show up the next time I open Safari and look at the bookmarks. If I start to re-type it in the address field, the full link and title appear below, so I know it's storing it somewhere.
Can someone just point me toward an online tutorial for manageing bookmarks within the iPhone environment not the desktop?
Thanks!

it's one of the dangers to BYOD.....The best way to manage this is education(unless you are ready for MDM).
Granted that can be a bigger pain in the buttocks than working around it.
What I tell people(having had this happen to me a couple of times) is when it's time to change your password
1.) Make sure you have all your devices with you
2.) disable the wireless on everything
3.) change password via your laptop
4.) enable one device, and go change the password there < rinse repeat for subsequent devices.
Now, when the company I was working for moved to a MDM, the issue went away on my phone and tablet, as the mail settings were controlled by the MDM, so when i changed my password, it pushed to my other devices.
HTH,
Steve
Please remember to rate useful posts, and mark questions as answered

Problem with version 10.1.3.1.0 and Tutorial for Forms/4GL

I startet to test the new version with the demo and
when i testing the first jspx on page 71 of the tutorial, I receive an error:
Unexpected exception caught: oracle.jbo.NameClashException, msg=JBO-25001: Name User of object type Attribute already exists.
i don't have an idea what's the problem. any help is appreciated.

Specifically, the steps in the tutorial from page 2-4 through 2-11
request that the user:
(1) Default entity objects for the SRDemo tables
(2) Change the datatype of ServiceRequest.SvrId to DBSequence
(3) Rename the associations involving ServiceRequest to have
more meaningful names.
The combination of the above three "ingredients" run into this bug.
The workaround for the tutorial is to skip step 2. & 3. wherein
the user sets the type of the SvrId attribute to DBSequence, and then
come back to the Entity Editor to mark the SvrId as DBSequence after
having first performed all the steps in the "Refining the Associations
Between Entities" section.
section

Adobe DPS - pop-up panels video tutorial for Indesign Digital Magazine problem?

Hello Everyone
Trying to get info in a video tutorial for pop-up panels tutorial for a Digital Magazine I'm working on.
Had advice to do a Multi-State Object - but this is exactly what I need it for and would love a video link i(f any is around).
Doing a digital Tech Magazine - have about 12 images on a page.
Want to touch one image and want a pop-up text box with Tech info on this product come up - I want all other images on page to ghost out on doing this - and then I need a button to click to close the panel down and go back to document and ready to click on another picture.
Is there a tutorial online on how to do this. Hope someone has a link pleaae.
thanks: Daz

Here's the best way to attack this as a beginner.
Create multipage InDesign file with number of pages being equal to the
number of states you want for your MSO.
On the first page design the base state. Copy/paste everything to the second
page and now design the second state.
On and on until you're done. Now group everything on each page and
copy/paste in place everything into one page. Create the MSO.
This is going to give you a pretty heavy file but will give you a good
foundation for the thought process needed to do this.

Dead Link in "Oracle ADF: Tutorial for Forms/4GL Developers"

In "Oracle Application Development Framework: Tutorial for Forms/4GL Developers (10.1.3.1.0)"
URL: http://www.oracle.com/technology/obe/ADFBC_tutorial_1013/10131/index.htm
link "Download the zipped support files" returns "We're sorry, the page you requested was not found."
URL: http://download.oracle.com/otndocs/products/jdev/10131/ADFBCTutorialSetup10131.zip

In "Oracle Application Development Framework: Tutorial for Forms/4GL Developers (10.1.3.1.0)"
URL: http://www.oracle.com/technology/obe/ADFBC_tutorial_1013/10131/index.htm
link "Download the zipped support files" returns "We're sorry, the page you requested was not found."
URL: http://download.oracle.com/otndocs/products/jdev/10131/ADFBCTutorialSetup10131.zip

JDeveloper - problems with Tutorial for Java EE Developers

Hi,
I am trying to start learning Oracle J2EE technologies, and I am using the Oracle "Tutorial for Java EE Developers (10.1.3.1.0)" listed in the Oracle Application Server 10g (10.1.3) page: http://www.oracle.com/technology/tech/java/oc4j/1013/how_to/index.html.
I am having problems in chapter 2, at the creating EJB 3.0 Persistence Entities stage, when using the Create Entities from Tables Wizard. Basically, when I select all the tables from the SRDEMO schema and attempt to create the Java classes, only the first table objects are created - ExpertiseAreas.java and ExpertiseAreasPK.java. I do not get any error messages, so I am not sure why the other table objects are not created.
If I then use the Wizard to select tables individually, the objects are created. However, they appear to be missing some details - specifically the @OneToMany annotation.
Has anyone encountered this same issue, or are there any known issues with this tutorial.
I am using version 10.1.3.4 of JDeveloper, on a 10g (10.2) XE database. I installed the version of JDeveloper without JDK included. I have a Sun Java EE 5 SDK Udate 5 (JDK 6u7) install of JDK.
Thanks,
Fraser

Please refer
http://www.oracle.com/technology/obe/obe1013jdev/10131/10131_ejb_30/ejb_30.htm
http://www.oracle.com/technology/tech/java/oc4j/ejb3/howtos/howtoejb30mappingannotations/doc/how-to-ejb30-mapping-annotations.html#onetomany

Tutorial for jwsdp-1.2

Hi,
Can any one point me to any Tutorial for jwsdp-1.2.
I guess there are some differences from Tutorial for jwsdp-1.1.
thanks
Rahul

It hasn't been released yet. On the index page under the directions for downloading the WS Tutorial they say "Note: This tutorial corresponds to the 1.1 release of Java WSDP. The version of the tutorial corresponding to JWSDP 1.2 will be available soon. "

Is there a simple tutorial for Garageband?

Is there a simple tutorial for Garageband?

Mac 101: GarageBand
http://www.apple.com/ilife/video-showcase/
Type "Garageband" into the search bar at the top of this page by "Support"

Tutorial for new Data Upload feature in 4.1?

Greetings,
Is there a tutorial available for using the new Data Upload feature in 4.1? We have not upgraded to 4.1 yet and I would like to try out the new feature on my APEX test workspace, so I can use the new feature once we are upgraded to 4.1.
Thanks,
John

I installed the Product Portal Sample Database and went to page 21. Very nice looking. Is there any tutorial for this Sample application? In other words, is there a tutorial that uses this application as its basis?
What I am really looking for (my apologies if I have not been clear) is a tutorial that steps you through the process of setting up the new feature of Data Upload in APEX 4.1. I would like to create a new application on my test workspace and learn how to set up the Data Upload page.
Seeing the Data Load in action is very helpful though. Thanks for pointing me to this.
Thanks,
John

Someone has a tutorial for creating screen exit?

I have a development and I do not know how to create screen exit.
Case Someone has a tutorial for creating screen exit please help me
Thank you
<b><i>Wagner Duarte
Consultant - SAP ABAP</i></b>

hI
Screen Exit is nothing but enhancing the screen like creating some more fields, subscreen and so on.
1. Go to the screen>System>Status-->Program (Double
click this program. It will take you to the program.
2. Now, Goto-->Object Directory Entry.
3. Make a note the package name.
4. Now run the transactions SMOD, press F4 and enter the
above noted package, press enter.
5. It will display list of Exits.
6. Now go back to the initial screen SMOD.
7. Specify the exit name here and select the radio button
Components.
8. It will display four group boxes one for FM, second
for Fcodes, thrid for Screen areas and last for
includes.
9. Goto transaction CMOD, create a new project, and
click the button "Enhancement assignments" and
specify your enhancements that you got in SMOD.
10. Now bouble clikc the enhancement, it will take you to editor with some includes starting with Z, double clikc the include you want to edit and proceed.
Have a look at below link It will definately help you to undestand the same.
http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
check these links.
http://help.sap.com/saphelp_46c/helpdata/en/c8/1975e643b111d1896f0000e8322d00/frameset.htm
http://www.allsaplinks.com/screen_exit.html
USER EXITS
https://forums.sdn.sap.com/click.jspa?searchID=672084&messageID=312792
https://forums.sdn.sap.com/click.jspa?searchID=672084&messageID=1320078
https://forums.sdn.sap.com/click.jspa?searchID=672084&messageID=2669896
How to implement screen exit for a SAP standard transaction
Introduction
SAP provides standard transactions to enter data into database. But a client may want to maintain some additional information in SAP other than what is provided.
To make provisions for this, additional screens have to be provided and additional fields must be added into appropriate database table.
To pave way for this, SAP has provided the option for screen exits. Usually, SAP provides the following:
An append structure in the database table with the new fields.
A subscreen area into the standard screen where the programmer can attach his subscreen of his own program with the new fields.
A function group under which the new subscreen has to be created with the new fields.
Function exits to synchronize the PBO and PAI of the standard SAP program with the PBO and PAI of the subscreen so that data can flow back and forth between the standard SAP program and the program written by the developer for the subscreen. These function modules also exist in the same function group under which the subscreen will have to be developed.
Finally, a linkage has to be done between the subscreen area of standard SAP screen with the custom subscreen constructed by the developer.
Typically, SAP provides an enhancement in which the developer can create an append structure, use the function exits to synchronize the PBO and PAI of the standard SAP program and the custom subscreen program, and make the necessary linking( as mentioned above in step 4. But, again, this is not a hard and fast rule. Linking in some case, is also done by configurations.) SAP also usually provides the name of the function group under which the subscreen has to be developed.
Necessary guidance about implementing a screen exit development is usually available in the Documentation section of the enhancement ( can be availed by transaction SMOD).
Pre-Requisites
The developer to work on screen exit should have essential knowledge on the following:
DDIC concepts, including the knowledge of append structure.
Concept of SAP Enhancements and implementing them using Projects.
Concept of function exits.
Knowledge on Module Pool including subscreens, Tabstrip controls etc.
Steps
Guidelines
So, a developer can follow the guidelines mentioned below to implement a screen exit to a standard SAP transaction, as and when required:
Find out the Required Enhancements
Go to SMOD. Press F4 in the Enhancement field. In the next popup window, click pushbutton SAP Applications. A list will appear that contains information on all the enhancements, categorized under functional areas. Developer must search for the enhancements relevant to his functional area of interest for e.g., Purchasing, Asset Accounting, etc.
Note down the enhancements. Then, come to the initial screen of SMOD and view the documentation of each enhancement to find out which one is required for your development.
Utilize the Enhancement in a Project
After you have found one, do as directed in the documentation. Generally, the steps are as follows:
Create a project using CMOD including your enhancement.
Create the append structure with new fields.
Go to the desired function group and create a subscreen with the new fields. Write PBO and PAI for the subscreen, if required.
Use the function exits in the enhancement to link the PBO and PAI of the subscreen with that of the main SAP program supporting the SAP transaction.
Maintain necessary linkage between the subscreen area of standard SAP program with the custom subscreen developed along with the custom program name. This can be done in the project (developed by CMOD including the enhancement) or outside as a part of configuration.
Activate the project.
Test to ensure that required functionality are met.
Case Study 1
Add three new custom fields for Asset master and maintain information for them
Requirement
Three fields in the legacy system have to be maintained in Asset master. These fields are:
Original Asset number 20 characters
Location 2 15 Characters.
Model no 20 characters
Location 2 should start with L.
Pre-Analysis
Finding out the Enhancement
As described above, the enhancement is determined. It was found, that enhancement AIST0002 will serve the purpose. It contains the following components (can be viewed by transaction SMOD):
Exit Type Description EXIT_SAPL1022_001 Function Exit Check of User-Defined Fields when Using Create and Change BAPI EXIT_SAPLAIST_002 Function Exit Transfer Data for User Subscreens in PBO. EXIT_SAPLAIST_003 Function Exit Transfer of User-Defined Fields to SAP Master Data Transactions CI_ANLU Customizing Include Include structure to add new fields
Studying the Function Exits
The function module level documentation for the function exits are then viewed from transaction SE37. The documentation clearly laid out for the purpose for their use:
EXIT_SAPLAIST_002
Function module Level Documentation
This function module is called by asset master data maintenance at the start of the dialog. (When changing, it is called after reading of the data from the database; when creating it is called after the transfer of the default values from the asset class and reference asset.) The purpose of the function module is to enable this function group to recognize the master data. For interpreting or controlling master data fields that are important for user fields, it is possible to transfer to global variables at this point, so that they can be recognized when the user subscreens are processed.
Import Parameters
Understanding
This function module is called at the PBO to pass the information retrieved from the database to pass them to the custom subscreen and its underlying program. Import parameter : I_ANLU will be populated with the values for user-defined fields which will be passed to the subscreen program. So, there must be some sort of variable assignment from I_ANLU.
EXIT_SAPLAIST_003
Function module Documentation: This function module is called by SAP asset master data maintenance after the screens are processed, but before saving. The purpose of the function module is to transfer fields entered on user sub-screens of SAP asset data maintenance to the database for updating. The export parameter for this function module is:
Understanding
This function module will be used to transfer the user entered data in the subscreen fields to the main SAP program, which will then be saved into the database.
Studying the Documentation of the Enhancement
The enhancement documentation (as is viewed from the initial screen of SMOD] also supports the idea. Moreover, it informs that we need to develop a subscreen under function group XAIS. This is the function group under which the two function exit modules also exist. So, if the custom subscreen refers to the global data of the function group XAIS, then those values will also be available to these function exits as well.
Going to SE80 and viewing the function group XAIS helps us to inform that there are three DDIC tables declared for it:
Deciding the Final course of Action
After making all the investigations, the final course of action was determined.
SrlNo Step Justification
A project has to be created using transaction CMOD where the enhancement AIST0002 will be included.
Customizing include CI_ANLU has to be created with the custom fields demanded When CI_ANLU will be developed, the custom fields will get appended to the database table ANLU. Also, these fields will be used to create screen fields in the new subscreen.
A custom subscreen, say, 9000 will be developed under function group XAIS. The screen group for the screen will be CUST (or any name). The three custom fields added to table ANLU (by creating CI_ANLU) will be used to create new fields in the screen.
In the PAI of the subscreen, validation for Location to start with L will be added. The subscreen with three new fields has to be developed so that it can be attached to a subscreen area of the asset master screens.
In the custom include of the function exit module EXIT_SAPLAIST_002, the following code will be written:-
ANLU = I_ANLU. I_ANLU is the import parameter of this FM. The value is assigned to the global variable ANLU, referring which the three new subscreen fields are developed. So, data retrieved from database table ANLU will be passed to this FM as I_ANLU by the standard SAP main program. The value will be taken and passed to the global variable of the function group XAIS, so that the three custom fields (referring to ANLU of XAIS) get populated.
In the custom include of the function exit module EXIT_SAPLAIST_003, the following code will be written:-
E_ANLU = ANLU. The changed values in the subscreen fields exist in global variable ANLU for the function group XAIS. This function exit module will pass the data back to the SAP main program as E_ANLU.
Proper linkage/configuration has to be done so that the new subscreens get linked to the appropriate subscreen area of the Asset master screen. This has to be done otherwise, the new custom subscreen will not be displayed in the Asset master screens.
Development
Creating a Project to include the enhancement
Go to transaction CMOD and create a project.
Enter a description for the project. Then, click on the pushbutton Enhancement Assignments in the Application Toolbar.
Enter the name of the enhancement and Save.
Go to Components.
Creating Custom Include for ANLU
The screen shown below will appear, showing all the enhancement components under the assignment AIST0002. Double-click on the name of the Include Structure to create it.
Create the include structure with three new fields, as required. Then, save and activate it.
Develop the subscreen and the program
Go to transaction SE80. For the function group XAIS, create a new subscreen 9000.
Create it as subscreen.
Then, go to the Layout of the screen and create three new fields from Database table ANLU.
Drag the fields in the screen body and place them.
Then, save and activate the screen and come back to screen flow editor.
Create the PAI module to add validation for field Location 2, as required .
Activate the whole function group and come out.
Write code in the Function Exits to synchronize the programs
Now, code has to be written in the function modules EXIT_SAPLAIST_002 and EXIT_SAPLAIST_003 so that data flows to and fro between the main SAP program and custom subscreen program. For that, go back to transaction CMOD and change the function exits.
Write code in the function module EXIT_SAPLAIST_002 called once at the beginning of the transaction:
Write code in EXIT_SAPLAIST_003 to pass the data from the subscreen to SAP main program.
Then, activate everything the whole project and come out.
Complete the configuration to link the subscreen
The development portion is complete. Now, linking of the subscreen has to be done with the subscreen area of the main program. In most of the cases, this linking can be done in the enhancement itself. But, here, requirement is a bit different. It is done by configuration using SPRO.
Assets are created under Asset class. And for each asset class, there is a layout assigned to it. For a layout, there are multiple tab pages assigned to it. And, for each tab page, there are multiple screen groups/field groups assigned.
Here, the requirement is to create these three custom fields in the tab page General of asset master screen ( AS01/AS02/AS03/AS91).
Determine the Layout
To achieve this, first of all, we need to find out which layout is assigned to asset class 1000.For that, go to transaction AOLK( information has to be obtained from functional consultant).Select the Asset Class 1000 and click on folder General Assignment of Layout.
Here, for Asset class 1000, for all the user groups, tab layout SAP is assigned. Since layout SAP cannot be changed, it has to be copied and manipulated to include our screen group. Later, the new layout has to be assigned over here.
Create new tab layout
Go to transaction AOLA. Copy the tab layout SAP to create another layout, say, YSUB.
System will copy all the settings and will inform you about that.
Select your newly created layout and double-click on the folder Tab page titles.
You want to put your custom fields in the tab page General. So, select this tab page entry and double-click on the folder "Position of Groups".
Here, all the field groups currently residing in the tab-page General are shown. Add an entry for your newly created fields.
Select the group box from the list. An entry will come with U padded with the custom subscreen prepared by you.
Then, save and come out.
Assign the new Layout to Asset Class
Now, go to tcode AOLK and assign tab layout YSUB for asset class 1000.
Save and come out.
Test the Exit
Everything is over. Now, go to transaction code AS01/02/03 or AS91 to deal with an asset of asset class 1000. You will see your new fields added to the screen. Add values to themsave. Then, enter into the tcodes again to see whether the values entered by you are being displayed or not.
Original Source: ittoolbox.com
Screen Exit is nothing but enhancing the screen like creating some more fields, subscreen and so on.
1. Go to the screen>System>Status-->Program (Double
click this program. It will take you to the program.
2. Now, Goto-->Object Directory Entry.
3. Make a note the package name.
4. Now run the transactions SMOD, press F4 and enter the
above noted package, press enter.
5. It will display list of Exits.
6. Now go back to the initial screen SMOD.
7. Specify the exit name here and select the radio button
Components.
8. It will display four group boxes one for FM, second
for Fcodes, thrid for Screen areas and last for
includes.
9. Goto transaction CMOD, create a new project, and
click the button "Enhancement assignments" and
specify your enhancements that you got in SMOD.
10. Now bouble clikc the enhancement, it will take you to editor with some includes starting with Z, double clikc the include you want to edit and proceed.
and you just go through these links also
Screen exit
http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
screen-exits
Check the following link.
https://www.sdn.sap.com/irj/sdn/advancedsearch?query=how%20to%20find%20screen%20exits&cat=sdn_all

Intro Tutorial for Flash CS4

I am new to Flash Professional CS4. I would like to
view a basic introductory tutorial that shows me what the product
does and how I can perform the basics. I am surprised that there is
not something I can click on right on the CS4 page at Adobe. Oh
well . . . Any help will be appreciated.

Thank you. That helped. The "tutorial" on the startup page of
CS4 brings me to a tutorial for CS3, which contains screens that I
do not see, etc. The tutorials on the pages you sent are much more
helpful. However, they are not in sequential order on the page
(why?). I can proceed though. Thanks again.

Tutorial for stageWebView

Hi all,
Is there any good tutorials for how to use the stageWebView in a mobile project?
I would love to read a very basic tutorial for this function, but haven't been able to find one... Anyone know where I can find it?
A written tutorial or a sample package (like the mobile employee directory) would be great!
Thanks in advance!
Best regards from Camilla in Sweden

Well, this is not a tutorial but it helped me a lot.
Here u will find an example and some usefull reviews that u can use.
http://soenkerohde.com/2010/11/air-mobile-stagewebview-uicomponent/
Also you can use the example from Tour de flex about calling an HTML page into a view.
Hope it helped!

Tutorial for simple login form

Can anyone post a link to a tutorial for a simple login form in Oracle form devloper 10g?
Thanks,
Va
Message was edited by:
user450092

> 1. When I enter the correct username and password, it
just drops me back
> into the login page.
This - header("Location=
http://thenewpage.com");
should be this - header("Location= thenewpage.php");
> 2. When I enter the incorrect username and password, it
drops me back into
> the login page without the error message.
Post the rest of the form, please.
(Now I'm really off for the Philles game!)
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Virginia Carter" <[email protected]> wrote in
message
news:g0pibi$lu2$[email protected]..
> I'm trying to create a simple login using a form and php
and am having
> difficulty in troubleshooting - if someone could give me
a little help, I
> would greatly appreciate it.
>
> Here is the code:
>
> <?php
>
> $error = FALSE;
>
> if (isset($_POST['client_password']) &&
isset($_POST['client_username']))
> {
> if (($_POST['client_password'] == 'blah') &&
> ($_POST['client_username'] == 'blahblah')) {
> header("Location=
http://thenewpage.com");
> exit();
> }
> else {
> $error = "<h2>You have entered an incorrect
password/username.
> Please try again.</h2>";
> }
> }
>
> ?>
>
> (and in the document body)
>
> <?php echo $error?$error:''; ?>
> <form method="POST" action="<?php echo
$_SERVER['PHP_SELF']; ?>"
> name="form1
> " id="form1">
> <rest of form follows here>
>
> In testing this page in the browser:
>
> 1. When I enter the correct username and password, it
just drops me back
> into the login page.
>
> 2. When I enter the incorrect username and password, it
drops me back into
> the login page without the error message.
>
> Thanks in advance.

Tutorial for pages

Similar Messages

Maybe you are looking for