Tutorial - how to create a sketch of a lovely dragon figure

Hi, I have seen a tutorial/inspiration video earlier when somebody (I think a Swedish girl) showed how to create a sketch of a lovely dragon figure. Can somebody help me find that video? It was part of the Create Now world tour (if I am right). THANKS!

The way I do it is rather simple.
1.       Copy the local RoboHelp project to a new location.
2.       Remove the link to source control. (See http://www.robowizard.com/RoboWizard/MonthlyScry/102004.htm on how to do this without opening RoboHelp. Please follow these instructions.)
3.       Open the RoboHelp project and add it to source control as a new project.
By creating a copy of the entire project directory, ALL the content is retained.
Greet,
Willam

Similar Messages

Tutorial How to Create a Driver

Anyone knows where I can find a tutorial about how to create a driver and how to deploy in sensor edge ?
Thanks.

For a start, have a look here:
http://www.oracle.com/technology/products/sensor_edge_server/Oracle_Sensor_Edge_Server_Guide.pdf Chapter 3
http://www.oracle.com/technology/products/sensor_edge_server/sample_code.html
There´s also a beta developer´s guide for 10.1.3. Send me a mail for that...

How to Create a system in portal server

I am trying to do the tutorial: How to Create a JDBC-based iView for Add/Update/Delete Record.
Its pre-requisite is: A system with an alias JDBC defined on your portal server, and mapped to a database.
Since I am new to VC, I do not know how to create a system, and I also do not know how to access the portal server.
Please help...

Hi Makarand,
Do you have any one who has the access to portal with administrator rights. I am hereby sending you the steps on how to create a system.
To define a system:
1. Create a new system; define all its properties
2. Create a default system alias.
3. Create a user mapping (from the user you use in VC) to the system alias, using the user\password to the backend system.
4. TEST the connection in the portal. If the test succeeds, it should be visible in VC discovery panel.
VC retrieves the systems via the portal.
You have to define the systems or use the defined systems in the portal you are connected.
To define systems in the portal:
System Administration => system configuration => system landscape:
in the PCD: right click on a folder and Add new system.
Then you have to define all the mandatory properties: Connector / Was / User management ...
dont forget to map your portal user with an R3/JDBC user...
thank you very much.

How to create a database for sample code from Tutorial/Book?

I want to try out the sample code from [http://shop.oreilly.com/product/0636920013471.do] for the book SQL Pocket Guide 3rd Ed.
I have downloaded the oracle vm/appliance for oracle 11g2 and I have started sqlplus as sysdba.
I'm feeling overwhelmed with these links describing how to create a database:
[http://www.adp-gmbh.ch/ora/admin/creatingdbmanually.html]
[http://tldp.org/HOWTO/Oracle-7-HOWTO-3.html]
[http://www.adp-gmbh.ch/ora/admin/creatingdbmanually.html]
(1) What is the command to list the existing databases?
(2) What is the command to delete an existing database?
(3) When creating a new database with the create database command, is it necessary to specify the logfile, character set, national character set, datafile, sysaux datafile, undo tablespace, temp table space? Do these have reasonable defaults? I'm not sure what proper directories are to specify for Linux and the examples are for windows.
Can someone give me a simplified create database command to create a database called 3rdEdPocketGuide? Should I follow the example at [http://tldp.org/HOWTO/Oracle-7-HOWTO-3.html] and instead of orcl use 3rdEdPocketGuide?
(4) What command do I use to execute the script that comes with the book SQL Pocket Guide 3rd Ed? This is the script that has all the drop table, create table and insert commands in it.
(5) What command do I use in sqlplus to set the current default database prior to running this script? Perhaps this is the connect command? I don't want my script to create tables in the system database.
(6) I tried the command "connect 3rdEdPocketGuide" and it prompted for a password! Yikes! What password? Do I need to specify a password when I create a database? I cannot tell if I have successfully created such a database or it is just prompting me for a password to thwart malicious users. Is it is possible to create databases which don't require a password or maybe a zero length password?
Thanks
Siegfried
Edited by: user8816970 on Sep 26, 2012 12:01 PM
Edited by: user8816970 on Sep 26, 2012 12:18 PM

user8816970 wrote:
Paul,
Thanks! I tried changing my profile name to siegfried but I'm not seeing the change...
Anyway, I'm trying your suggestion to use SQL Developer which was already installed in the virtual box appliance and I cannot figure out how to get a connection.
When I use the defaults of sid=xe, port=1521, hostname=localhost and specify
username=sysdba
password=
I get status: failure - test failed: listener refursed connection with the following error: ORA 12505, TNS: listener does not current know of sid given.
So I try sid=orcl and that works better: status: failure - test failed: ORA-01017: invalid username/passowrd; login denied
OK, sqlplus let me in with out a password, why does not this work?
So I try checking the box for "OS Authentication" and I get the same error!
Hoek: I tried searching the documentation and found "3 Exploring Oracle Database with SQL Developer" at http://docs.oracle.com/cd/E11882_01/appdev.112/e10766/toc.htm but following those directions did not help. Can you be more specific? The directions were for a tutorial and I need to know what the passwords are for the database set up with [http://www.oracle.com/technetwork/database/enterprise-edition/databaseappdev-vm-161299.html|http://www.oracle.com/technetwork/database/enterprise-edition/databaseappdev-vm-161299.html] . I also found [http://docs.oracle.com/cd/E11882_01/appdev.112/e10766/tdddg_connecting.htm#CEGHFHIG|http://docs.oracle.com/cd/E11882_01/appdev.112/e10766/tdddg_connecting.htm#CEGHFHIG] but that did not help either.
Everyone:
Do I need to create a user using SQL*Plus first so I can login with "Oracle SQL Developer" so I create my database called? What would be the "create user" command I would execute?
OK, so I run sqlplus and issue these commands
create user siegfried identified by abc ;
grant connect to siegfried ;
connect siegfried/abc;
Now, how do I create a database? In Microsoft SQL Server one has to create a database first and if you just start creating tables without creating a database first, the tables will be created in the system database and this is usually undesirable.
Sometimes a database is known in the java connection string as the catalog. Is there any such analog in oracle SQL plus?
So now what do I do? I want to create a bunch of tables using my script I downloaded from 3rd Ed SQL Pocket Guide. Does my new user "siegfried" have the right to create tables? I guess I could try but I don't want to create tables in the system database.
I noticed I can also use "Oracle SQL Developer" to connect with my new "siegfried" account. It seems that I should have been able to connect with sysdba... strange.
So now I am connected in the "Oracle SQL Developer" and I see no list of databases.
Thanks!
Siegfried
>Paul,
Thanks! I tried changing my profile name to siegfried but I'm not seeing the change...
Anyway, I'm trying your suggestion to use SQL Developer which was already installed in the virtual box appliance and I cannot figure out how to get a connection.
When I use the defaults of sid=xe, port=1521, hostname=localhost and specify
username=sysdba
password=
I get status: failure - test failed: listener refursed connection with the following error: ORA 12505, TNS: listener does not current know of sid given.
So I try sid=orcl and that works better: status: failure - test failed: ORA-01017: invalid username/passowrd; login denied
OK, sqlplus let me in with out a password, why does not this work?
So I try checking the box for "OS Authentication" and I get the same error!
Hoek: I tried searching the documentation and found "3 Exploring Oracle Database with SQL Developer" at http://docs.oracle.com/cd/E11882_01/appdev.112/e10766/toc.htm but following those directions did not help. Can you be more specific? The directions were for a tutorial and I need to know what the passwords are for the database set up with [http://www.oracle.com/technetwork/database/enterprise-edition/databaseappdev-vm-161299.html|http://www.oracle.com/technetwork/database/enterprise-edition/databaseappdev-vm-161299.html] . I also found [http://docs.oracle.com/cd/E11882_01/appdev.112/e10766/tdddg_connecting.htm#CEGHFHIG|http://docs.oracle.com/cd/E11882_01/appdev.112/e10766/tdddg_connecting.htm#CEGHFHIG] but that did not help either.
Everyone:
Do I need to create a user using SQL*Plus first so I can login with "Oracle SQL Developer" so I create my database called? What would be the "create user" command I would execute?
OK, so I run sqlplus and issue these commands
create user siegfried identified by abc ;
grant connect to siegfried ;
connect siegfried/abc;
above does NOT use SQL*Net to connect to the instance
>
Now, how do I create a database? In Microsoft SQL Server one has to create a database first and if you just start creating tables without creating a database first, the tables will be created in the system database and this is usually undesirable.
Sometimes a database is known in the java connection string as the catalog. Is there any such analog in oracle SQL plus?
So now what do I do? I want to create a bunch of tables using my script I downloaded from 3rd Ed SQL Pocket Guide. Does my new user "siegfried" have the right to create tables? I guess I could try but I don't want to create tables in the system database.
I noticed I can also use "Oracle SQL Developer" to connect with my new "siegfried" account. It seems that I should have been able to connect with sysdba... strange.
So now I am connected in the "Oracle SQL Developer" and I see no list of databases.SQL Developer can only connect to the instance via SQL*Net
>
Thanks!
Siegfrieda database in SQL Server is same as schema/user in Oracle

Tutorial Announcement .:: How to Create a Dynamic RSS Feeds ::.

.:: How to Create a Dynamic RSS Feeds ::.
Using Adobe Dreamweaver 8 and InterAKT Rss Reader Writer Extension.
Hello everyone...
RSS feeds are very useful within sites, as they allow integrating for you website content in an automatic manner. Just share the source for the RSS feed, and when the original content changes, it will reflect in the content you share with any one who subscribed in this feeds on your site.
In this tutorial i`ll help you integrate a RSS feed into one of your pages. This will display the content of your website to feeds subscribers with up to date content.
The main purpose of this tutorial is to create a page that allows visitors subscribe to the RSS Feed that they want to see from your website content, or even enter their own in a text box by searching through feeds. also you can define feeds categories if your website is online store, merchant etc...
:: Online Demo ::
:: Go to tutorials ::
Best Regards
Waleed Barakat
Developer-Online Creator and programmer
http://www.developer-online.com

Hey Waleed,
thanks again for this great stuff -- and thanks for removing the login protection :-)
Cheers,
Günter Schenk
Adobe Community Expert, Dreamweaver

Tutorial on how to create an Ajax-enabled JSF component in Creator?

Is there a tutorial on how to create (not use/import existing) an Ajax-enabled JSF component using Creator 2? I read somewhere that it was done during a presentation in 3 minutes! Now that I really want to see ;-
thanks,
-nikita

As far as I remeber, Edwin Goei's examples are the
closest thing to the info you are looking. He has an
example component, but don't remember if they're
AJAX enabled. Check it on
http://wiki.java.net/bin/view/Javatools/CustomCompone
tLibraries.
Best regards
Antonio.Thanks for the plug. I've been meaning to update that article. Writing an AJAX component is similar to writing other kinds of components but the developer uses AJAX techniques. The latest version of the popup calendar which is checked into the bpcatalog project of java.net uses Dojo which also has some support for AJAX. I haven't yet had time to update the article yet, unfortunately.
-Edwin
http://blogs.sun.com/edwingo/

How to create a web browser tutorial

Is there a tutorial on how to create a flash web browser?
Harley

i don't see a problem with your code.
but i know not every browser lets you (the popup creator) control those aspects of the browser unless the user has settings that allow you to control them. so, for example, the fact that you have a browser that continues to show the location field in your popup is not surprising.

How to create sketch effect on photographs?

Hi - I have photographs of mine that I would like to use as sketches in my textbooks. Do you know how I can
create a sketch/drawing effect of photographs with photoshop? Many thanks for your help. Cheers, Schbang.

Image > Mode > Grayscale
Filter > Stylize> Find Edges
30 seconds work!
You can then experiment on the result with Image > Adjust > Brightness/Contrast (and possibly Threshhold).

Tutorial or instruction s on how to create an extension for dreamweaver

Can some body please point me to a tutorial or instructions on how to create an extension for dreamweaver
I used to create extension for flash few years ago. It was quite straight forward, but not for dreamweaver any help will be appreciated.

Take a look at:
Extending Dreamweaver Help - http://help.adobe.com/en_US/Dreamweaver/10.0_Extending/
API Documentation - http://help.adobe.com/en_US/Dreamweaver/10.0_API_Ref/index.html

How to create the Sap script & Layout Set (wants sample code)

Hi All ,
Can you please provide me the step by step procedure
to create the Sap script & Layout Set .(please provide sample
code/links /docs for layout & print program).
Regards
Rahul

hi,
go through the following links what i found to create sap script.
http://www.thespot4sap.com/Articles/SAPscript_Introduction.asp
http://abapliveinfo.blogspot.com/2008/01/free-sapscript-made-easy-46-book.html
http://www.thespot4sap.com/articles/SAPscript_example_code.asp
http://idocs.de/www3/cookbooks/sapscript/sapscript_1/docu.htm
http://idocguru.com/www5/cookbooks/sapscript/sapscript_1/example.htm
www.geocities.com/wardaguilar25/sapscript-tutorial.html
http://logosworld.de/www3/cookbooks/sapscript/sapscript_8/docu.htm
how to create a scripts?give steps?
https://forums.sdn.sap.com/click.jspa?searchID=1811669&messageID=2969311
https://forums.sdn.sap.com/click.jspa?searchID=1811669&messageID=2902391
https://forums.sdn.sap.com/click.jspa?searchID=1811669&messageID=3205653
https://forums.sdn.sap.com/click.jspa?searchID=1811669&messageID=3111402
http://www.sap-img.com/sapscripts.htm
http://sappoint.com/abap/
http://www.henrikfrank.dk/abapexamples/SapScript/sapscript.htm
http://help.sap.com/saphelp_crm40/helpdata/en/16/c832857cc111d686e0000086568e5f/content.htm
http://www.sap-basis-abap.com/sapabap01.htm
http://www.sap-img.com/sapscripts.htm
http://searchsap.techtarget.com/tip/1,289483,sid21_gci943419,00.html
http://sap.ittoolbox.com/topics/t.asp?t=303&p=452&h2=452&h1=303
http://www.sapgenie.com/phpBB2/viewtopic.php?t=14007&sid=09eec5147a0dbeee1b5edd21af8ebc6a
Other Links

How to create a user account by mirroring another account in PowerShell (Trying to learn to use Powshell for some daily AD tasks intead of the GUI)

Hi,
I am trying to create user accounts via PowerShell instead of the Gui in server 2008 R2 (PowerShell 2.0).
I know how to create a user account with the following Power Shell command below is one from a dummy domain I created to practice.
PS C:\Users\Administrator> New-ADUser -SamAccountName "TestOut" -UserPrincipalNa
me "[email protected]" -GivenName "Test" -Surname "out" -DisplayName "Testou
t" -Name "Testout" -Enabled $true -Path "CN=users,DC=bwcat,DC=net,DC=int" -Accou
ntPassword (Read-Host -AsSecureString "Enter Account Password")
However when doing day to day tasks where I work normally we have a new hire, they contact IT and ask that a user account is created. I will ask who they would like to mirror.
I then would go into the gui pull up the user that they want to mirror right click him and choose copy. This would create a new user account that I would then fill out.
I am wondering if its possible to do this same thing via PowerShell, or if its not an option because it takes more work type up everything than it does to go into the gui and do it.
Anyway thanks for the help.

Hi Wilder, hi Mark,
first of all: The tutorial sources Mark posted - especially the book "Powershell 3 in A month of lunches" - are good to get a baseline start. A really great reference, especially when you try to learn it while still dealing with your daily business.
On another note, Wilder: While I fully agree that learning things sequentially is usually the best, I too jumped right in instead of learning how to walk first (though it's been some time now. Fewer years than you'd think, but still ...). So I thought I'd
give you a little aid with that function husk, so you could just stuff interesting bits into an available structure, making use of the fun tools in a useful context (It's fun fiddling around with the commands, but if you have to type in all of them manually
each time, using the GUI is often just faster. Doing fun things and being efficient with it feels even better though ...). So ... while I
do agree with yourself, learn it the Correct & Proper Way, I also do
intend to finish this little explanation about the husk, all the way to the end.
Everything below this paragraph is part of this.
function Copy-ADUser
<#
.SYNOPSIS
A brief description of the Copy-ADUser function.
.DESCRIPTION
A detailed description of the Copy-ADUser function.
.PARAMETER GivenName
A description of the GivenName parameter.
.PARAMETER Surname
A description of the Surname parameter.
.PARAMETER Template
A description of the Template parameter.
.EXAMPLE
PS C:\> Copy-ADUser -GivenName "Max" -Surname "Mustermann" -Template "Jonny.Normal"
.NOTES
Additional information about the function.
#>
[CmdletBinding()]
Param (
[Parameter(Mandatory = $true)]
[string]
$Surname,
[Parameter(Mandatory = $true)]
[string]
$GivenName,
[Parameter(Mandatory = $true)]
[string]
$Template
) # Create finished Strings
$JoinedName = $GivenName + "." + $Surname
# Create new User
$NewUser = New-ADUser -Surname $Surname -GivenName $GivenName -DisplayName "$Surname, $GivenName" -SamAccountName $JoinedName -Name "$Surename, $GivenName" -PassThru
# Copy from old User
$NewUser | Add-ADPrincipalGroupMembership -MemberOf (Get-ADPrincipalGroupMembership $Template | Where { $_.Name -ne 'Domain Users' })
# Do Whatever else you feel like doing
This is again the same function husk I posted earlier. Only this time, I filled a little logic (the pieces that were already posted in this thread). This time, I'll not only go over each part again ... I'll do it by reposting the segments and trying to show
some examples on how to modify the parts. Thus some of it will be repetitive, but this way all the info is in one spot.
Segment: Comment Based Help
<#
.SYNOPSIS
A brief description of the Copy-ADUser function.
.DESCRIPTION
A detailed description of the Copy-ADUser function.
.PARAMETER GivenName
A description of the GivenName parameter.
.PARAMETER Surname
A description of the Surname parameter.
.PARAMETER Template
A description of the Template parameter.
.EXAMPLE
PS C:\> Copy-ADUser -GivenName "Max" -Surname "Mustermann" -Template "Jonny.Normal"
.NOTES
Additional information about the function.
#>
That's the premier documentation part of a function, that teaches a user what the function does and how to use it. It's what's shown when using the Get-Help cmdlet.
Comment texts are not restricted to single lines however. For example you could replace ...
.EXAMPLE
PS C:\> Copy-ADUser -GivenName "Max" -Surname "Mustermann" -Template "Jonny.Normal"
... with ...
.EXAMPLE
PS C:\> Copy-ADUser -GivenName "Max" -Surname "Mustermann" -Template "Jonny.Normal"
Creates a new user named Max Mustermann and copies the group memberships of the already existing user Jonny Normal to this new User
... and get an explanation on what the example does when using Get-Help with the
-Detailed parameter (Explaining examples is always a good idea).
Segment: Parameter
[CmdletBinding()]
Param (
[Parameter(Mandatory = $true)]
[string]
$Surname,
[Parameter(Mandatory = $true)]
[string]
$GivenName,
[Parameter(Mandatory = $true)]
[string]
$Template
This is the segment that tells Powershell what input your function accepts. Each parameter of Copy-ADUser you set will be available in the next segment as a variable of the same name. You can add additional parameters if you need more information for your
logic. For example, let's add a parameter that allows you to specify what Organization the new user should belong to:
[CmdletBinding()]
Param (
[Parameter(Mandatory = $true)]
[string]
$Surname,
[Parameter(Mandatory = $true)]
[string]
$GivenName,
[string]
$Organization,
[Parameter(Mandatory = $true)]
[string]
$Template
That's how that would look like. You may notice that I didn't add the line with
"[Parameter(Mandatory = $true)] this time. This means you
may add the Organization parameter when calling Copy-ADUser, but you need not.
Segment: Logic
# Create new User
$NewUser = New-ADUser -Surname $Surname -GivenName $GivenName -DisplayName "$Surname, $GivenName" -SamAccountName "$GivenName.$Surename" -Name "$Surename, $GivenName" -PassThru
# Copy from old User
$NewUser | Add-ADPrincipalGroupMembership -MemberOf (Get-ADPrincipalGroupMembership $Template | Where { $_.Name -ne 'Domain Users' })
# Do Whatever else you feel like doing
This is the part of the function that does the actual work. Compared to the first husk I posted, this time there are two commands in it (and some comments). First, I create a new user, using the information passed into
the parameters -Surname and -GivenName. Then I Copy the group memberships of the user identified by the information given by the
-Template parameter.
So, let's modify it!
# Tell the user you are starting
Write-Host "Starting to create the user account for $GivenName $Surname"
# Create new User
$NewUser = New-ADUser -Surname $Surname -GivenName $GivenName -DisplayName "$Surname, $GivenName" -SamAccountName "$GivenName.$Surename" -Name "$Surename, $GivenName" -PassThru
# Tell the user you are copying Group Memberships
Write-Host "Copying the group-memberhips of $Template to $GivenName $Surname"
# Copy from old User
$NewUser | Add-ADPrincipalGroupMembership -MemberOf (Get-ADPrincipalGroupMembership $Template | Where { $_.Name -ne 'Domain Users' })
# Do Whatever else you feel like doing
Now after adding a few lines, the logic will tell us what it's doing (and do so before it
is taking action)!
Hm ... didn't we create a change in the Parameter Segment to add an -Organization parameter? Let's use it!
# If the -Organization parameter was set, the $Organization variable will be longer than 0. Thus do ...
if ($Organization.Length -gt 0)
# Tell the user you are starting
Write-Host "Starting to create the user account for $GivenName $Surname in the Organization $Organization"
# Create new User
$NewUser = New-ADUser -Surname $Surname -GivenName $GivenName -DisplayName "$Surname, $GivenName" -SamAccountName "$GivenName.$Surename" -Name "$Surename, $GivenName" -Organization $Organization -PassThru
# If the -Organization parameter was NOT set, the $Organization variable will have a length of 0. Thus the if-condition does not apply, thus we do the else block
else
# Tell the user you are starting
Write-Host "Starting to create the user account for $GivenName $Surname"
# Create new User
$NewUser = New-ADUser -Surname $Surname -GivenName $GivenName -DisplayName "$Surname, $GivenName" -SamAccountName "$GivenName.$Surename" -Name "$Surename, $GivenName" -PassThru
# Tell the user you are copying Group Memberships
Write-Host "Copying the group-memberhips of $Template to $GivenName $Surname"
# Copy from old User
$NewUser | Add-ADPrincipalGroupMembership -MemberOf (Get-ADPrincipalGroupMembership $Template | Where { $_.Name -ne 'Domain Users' })
# Do Whatever else you feel like doing
There! Now we first check whether the -Organization parameter was set (it's not mandatory after all, so you can skip it). If it
was set, do whatever is in the curly braces after if (...). However, if it wasn't set, do whatever is in the curly braces after
else.
And that concludes my "minor" (and hopefully helpful) tutorial on how to use the function husk I posted :)
With this, whenever you find another cool command that helps you in the user creation process, you can simply add it, similar to what I did in these examples.
And if it all didn't make much sense, go through the tutorials in proper order and come back - it'll make much more sense then.
Cheers and good luck with PowerShell,
Fred
There's no place like 127.0.0.1

How to create new groups (list) for storing user's data?

Hi,
I'm using cq-5.4 and I was undertaking the campaign management tutorial which explains about how to send out a weekly news letter. As a part of that I was creating a sign up form for subscribers to fill out. So after filling up that form, user's data would get stored somewhere and eventually that data will be used while sending out the weekly news letters to him.
This was the link I was referring to for that,
http://dev.day.com/docs/en/cq/5-4/wcm/campaigns.html#Create a Sign Up Form
So on that link, the 3rd screenshot talks about how to set the form action. They have for example set the form action to 'Create and Update Account' and accordingly under 'Action Configuration', 'geometrixx newsletter' is assigned as the 'Initial Group'. But they never talked about how to create the 'geometrixx-newsletter' group? Where to create that group etc. Hence, after completing the form when I press submit, nothing happens. In reality whatever data I entered should've got stored in the 'geometrixx newsletter' group.
So that is the place where I'm stuck. Can someone tell me how and where should i create this group?
Thanks!

Hi,
Thank you for posting the screen shots I have been unsuccessful in determining exactly where the problem is coming from. Would it be possible for you to post the actual VI so that I can work with it so see if I can reproduce this issue using your code? In regard to your questions:
1.    You are correct 1000 samples read should write 1000 samples to the table
2.    I believe the discrepancy is due to amount of manipulation done between the read and the file write but I cannot be certain, without the code to work with.
3.    I am unclear as to exactly what is happening. If you are reading empty channels then you may receive erroneous readings this is to be expected. When you connected your accelerometer did you connect in RSE or differential? You can also manipulate the signal range with will affect the gain setting, how off are the readings?
JaceD
Signal Sources Product Support Engineer
National Instruments

How to create / populate new table in MaxDB?

Dear All,
I'm a newbies in using MaxDB and still learning on it.
I've installed MaxDB Database Manager 7.6
I need help from all the experts here on the following "dumb" questions from me.
1) I can't create, modify or delete any table / data with Database Manager, am I right?
2) Should I start creating / populating tables with sqlcli or dbmcli? I was informed that I should use sqlcli instead or dbmcli.
3) What is the syntax for me to create new table, as well as add, modify and delete data within it?
Please assist to provide some guidance or at least point me to the right direction interm of documentation available.
THANK YOU VERY MUCH!!!
Much appreciated,
-Deric-

> I've installed MaxDB Database Manager 7.6
>
> I need help from all the experts here on the following "dumb" questions from me.
>
> 1) I can't create, modify or delete any table / data with Database Manager, am I right?
Nope - the Database Manager is not able to to "sql-stuff".
You would want to use the Database Studio or the SQL Studio for that.
But as you're starting to learn anyhow, just go for the more modern Database Studio.
It combines the features of Database Manager and SQL Studio into one tool.
> 2) Should I start creating / populating tables with sqlcli or dbmcli? I was informed that I should use sqlcli instead or dbmcli.
Why would you want to learn SQL by working with command line tools?
Really, go for the Database Studio instead.
For simple SQL stuff via command line you may use sqlcli.
> 3) What is the syntax for me to create new table, as well as add, modify and delete data within it?
> Please assist to provide some guidance or at least point me to the right direction interm of documentation available.
You definitively need
a) read the tutorial in the [documentation|http://maxdb.sap.com/doc/7_7/d0/3e345709c044d4a954e3a8d0be0867/content.htm]
and
b) get a SQL learning book to really understand the concepts behind relational databases and the query language.
Learning SQL is not about knowing how to type the commands.
Most users learn the commands rather quickly.
But fully understanding the set-approach of relational databases and how to create and use those databases correctly is often not learned.
So make sure not to fall into this trap!
regards,
Lars

Flashbuilder 4 how to create custom folders in component explorer

Hi, I was wondering if anyone knew how to create my own folder in the components explorer? I know that when I create a new component it gets added under "custom", but I want to create my own folder and insert an image next to the component. I've searched everywhere and cannot find a solution. Thanks in advance!

I tried that and no go. This was the only tutorial I could find on the subject but it didn't work.
http://groups.adobe.com/posts/aac1e13143

How to create a Custom Effect?

First of all, I'm sorry, if I make any mistakes writing this post! I actually am German!
I would like to know how I can alter the Animation Presets in AE CS5, that are quite messy because they just are a collection of effects, into the much more organised and nicer Custom Effects like Andrew Kramer (from Video Copilot) has on his website for free download.
I already tried out a tutorial from aetuts+ ("Create Your Own Custom Effects!"), but it just didn't work and told me it couldn't apply my effect when I runned the script (maybe because it actually was written for AE CS4).
So my question is: Is there an easy way to organize the effects and expressions from an ordinary preset to make the preset friendlier to use? And even if it's not easy, is there a way at all?
I thank you in advance and hope you can help me!

(As always: Sorry for mistakes! )
Rick Gerard schrieb:
[...] Creating a true plug-in requires knowledge of programming and a good understanding of the AE SDK (Software Development Kit). [...] I think you're looking for some help with scripts, which can look like a plug-in. Some more details about your project will be helpful. [...]
Mylenium schrieb:
[...] You can store a ton of things in a simple animation preset, so whether or not you turn them into "custom" effects is not of much consequence in the end. [...]
I might have asked my question badly so I want to say some more things about it:
I do not want to create a real plug-in like Andrew Kramer's "Action Essentials" for example. Something like his little presets you can download with his projects like the first lightsaber "plug-in" he made was what I thought about. (It might actually be a bad example, because it could have involved some serious programming, but I'm refering more to the way, it is customized than the way it functions.)
I just want to have one panel (like each individual built-in effect) that controls the effects. I find it really annoying and messy to have to change the values from sliders that are all in their own panel. So I'm not looking to programming any plug-in, just to organizing a preset in a way, it becomes more comfortable to use.
Mylenium schrieb:
[...] It's more likely a language isue. [...]
That's really bad, because that tutorial trained exactly what I wanted! But thank you for the advice!
Mylenium schrieb:
[...] I really should think that users have better things to do than waste
their time with such toyish stuff, but well, I guess some have too much
time to spare... [...]
You're right, it's a waste of time to make things more comfortable to use! Imagine After Effects would have a nice interface which by the way also looks kind of cool!

Tutorial - how to create a sketch of a lovely dragon figure

Similar Messages

Maybe you are looking for