Tutorial on unifications

Hello experts,
I have worked on Portal Knowledge Management and Collaboration applications but haven't used unification so far.
Can someone please send me some tutorial types documents to get me started on the topic.
Thank you very much.

hi sabbir,
check this link
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/8f139679-0601-0010-e193-cf6eb27a3077
Business Unification with mySAP Enterprise Portal
best link to start with :
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/52d99890-0201-0010-0b92-a7c96ac20be9

Similar Messages

  • I can't sync my iPhone5 to iTunes.  The tutorial said to click on devices, but I don't see it anywhere on my computer screen.  HELP!

    I am trying to sync my iPhone 5 to iTunes in order to download some new tones.  I did this back in December and didn't have any trouble.  Now I can't seem to do it.  The tutorial says to click ITunes open and then click on devices.  I don't see devices anywhere on my computer.  I do have my phone physically plugged into the computer, so I don't know why it isn't showing devices or the option of "Sync Now".  What am I doing wrong?  It's probably something very simple I'm overlooking. 

    It is referring to under devices in the iTunes source list, not on your desktop.
    http://support.apple.com/kb/ts1538

  • Where can I find a tutorial about Show Folders Hierarchy?

    I have Permiere Elements 11 which also has the Elements Organizer as part of the program. And I have Photoshop Elements 10 also. The Elements Organizer with the video editing program is what I'm interested in though. I think my folder hierarchy is not right. I'd like to straighten it out but I don't know how. Can someone direct me to a tutorial on how to work with the Folders Hierarchy.
    This might be a different question, but it might be related to my confusion about the Folder Hierarchy in the Organizer. On June 10 I was copying some photos from my hard drive to the Organizer - probably a dumb thing to do. While I was doing this, the Pictures folder (View and organizes digital pictures) no longer took me to all my photos on the hard drive. The Pictures folder is under Personal Folder, Documents, Music, Control Panel on the Windows 7 desktop to the right of the Start Menus stuff.
    When I click on Pictures now I get two folders: Adobe and Pictures. The Adobe folder has these values - Size: 0 bytes; Contains: 0 Files, 1 Folder; Created: Monday, June 10, 2013; Attributes: Read-only (only applies to files in the folder. I deleted the Abobe folder several times but it keeps coming back.
    What I would really like to do is to restore my Pictures folder to its original state so that I will have access to all my hard drive photos immediately instead of clicking around in those folders. I vaguely think that something I did to the folder hierarchy in the Optimizer has messed up other things on my computer.

    You wrote, "So if you moved the files, what you need to do is move them back..."
    I don't know how to do this. Could you tell  me how. I moved about 50 photos into the Organizer. Now I know I should not have done this. I'd like to correct the mistake.
    When I click on the Show Folder List icon this is what I see:
    My Pictures
         Pictures
              Faces
                   Clowns
         My Videos
         Computer
                   C:
                   Program Data
                   Users
                        Tommy
                              Faces
                                   Dancing
                                   Faces
                                   Lovers
                                   Racing
                                   Tommy
                         Pictures
                  D
                  E
                  F
                  G
    This makes no sense to me. But I could live with it - except perhaps something I did has made my PrE11 impossible to work with. When I put new clips via the memory card into the program, they do not go into the Timeline. All I get is an error message.
    I like the Adobe programs and don't want to give up on them, especially since my problems probably have been self-imposed.

  • Error while running HRFacadeClient of JDev 11g Tutorial

    Hi,
    I was following the tutorial under Build a Web Application with JDeveloper 11g Using EJB, JPA, and JavaServer Faces
    Section 19 says to run application under OC4J,
    <strong>19.</strong> Right click the <strong>HRFacadeBean</strong> in the Application Navigator and select <strong>Run</strong> from the context menu to launch the facade bean in the Embedded OC4J sever.
    Curently OC4J not available under JDev 11g Production version, so it runs under Web-logic Server which comes with JDeveloper 11g. Please see the log below:
    Default Server - Log
    D:\Appl\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.56\DefaultDomain\bin\startWebLogic.cmd
    [waiting for the server to complete its initialization...]
    JAVA Memory arguments: -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=48m -XX:MaxPermSize=128m
    WLS Start Mode=Development
    CLASSPATH=;D:\Appl\Oracle\MIDDLE~1\patch_wls1030\profiles\default\sys_manifest_classpath\weblogic_patch.jar;D:\Appl\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\sys_manifest_classpath\weblogic_patch.jar;D:\Appl\Oracle\MIDDLE~1\patch_cie660\profiles\default\sys_manifest_classpath\weblogic_patch.jar;D:\Appl\Oracle\MIDDLE~1\JDK160~1\lib\tools.jar;D:\Appl\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic_sp.jar;D:\Appl\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.jar;D:\Appl\Oracle\MIDDLE~1\modules\features\weblogic.server.modules_10.3.0.0.jar;D:\Appl\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\webservices.jar;D:\Appl\Oracle\MIDDLE~1\modules\ORGAPA~1.5/lib/ant-all.jar;D:\Appl\Oracle\MIDDLE~1\modules\NETSFA~1.0_1/lib/ant-contrib.jar;D:\Appl\Oracle\Middleware\jdeveloper\modules\features\adf.share_11.1.1.jar;;D:\Appl\Oracle\MIDDLE~1\WLSERV~1.3\common\eval\pointbase\lib\pbclient57.jar;D:\Appl\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\xqrl.jar;;
    PATH=D:\Appl\Oracle\MIDDLE~1\patch_wls1030\profiles\default\native;D:\Appl\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\native;D:\Appl\Oracle\MIDDLE~1\patch_cie660\profiles\default\native;D:\Appl\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32;D:\Appl\Oracle\MIDDLE~1\WLSERV~1.3\server\bin;D:\Appl\Oracle\MIDDLE~1\modules\ORGAPA~1.5\bin;D:\Appl\Oracle\MIDDLE~1\JDK160~1\jre\bin;D:\Appl\Oracle\MIDDLE~1\JDK160~1\bin;C:\oraclexe\app\oracle\product\10.2.0\server\bin;D:\Appl\OraHome1\bin;D:\Appl\OraHome1\jlib;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;D:\Appl\Java\jdk1.6.0_01\bin;C:\Program Files\Symantec\pcAnywhere\;C:\Program Files\Apache Software Foundation\Apache2.2\php\ext;D:\Appl\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32\oci920_8
    * To start WebLogic Server, use a username and *
    * password assigned to an admin-level user. For *
    * server administration, use the WebLogic Server *
    * console at http:\\hostname:port\console *
    starting weblogic with Java version:
    java version "1.6.0_05"
    Java(TM) SE Runtime Environment (build 1.6.0_05-b13)
    Java HotSpot(TM) Client VM (build 10.0-b19, mixed mode)
    Starting WLS with line:
    D:\Appl\Oracle\MIDDLE~1\JDK160~1\bin\java -client -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=48m -XX:MaxPermSize=128m -DproxySet=true -DproxyHost=192.0.20.100 -DproxyPort=800 -Dhttp.proxyHost=192.0.20.100 -Dhttp.proxyPort=800 "-Dhttp.nonProxyHosts=*.local|10.19.37.*|localhost|10.12.36.180|*.alshaya.com" -Dhttps.proxyHost=192.0.20.100 -Dhttps.proxyPort=800 "-Dhttps.nonProxyHosts=*.local|10.19.37.*|localhost|10.12.36.180|*.alshaya.com" -Djbo.34010=false -Xverify:none -da -Dplatform.home=D:\Appl\Oracle\MIDDLE~1\WLSERV~1.3 -Dwls.home=D:\Appl\Oracle\MIDDLE~1\WLSERV~1.3\server -Dweblogic.home=D:\Appl\Oracle\MIDDLE~1\WLSERV~1.3\server -Ddomain.home=D:\Appl\Oracle\MIDDLE~1\JDEVEL~1\system\SYSTEM~1.56\DEFAUL~1 -Doracle.home=D:\Appl\Oracle\Middleware\jdeveloper -Doracle.security.jps.config=D:\Appl\Oracle\MIDDLE~1\JDEVEL~1\system\SYSTEM~1.56\DEFAUL~1\config\oracle\jps-config.xml -Doracle.dms.context=OFF -Djava.protocol.handler.pkgs=oracle.mds.net.protocol -Xms1024m -Xmx1024m -XX:MaxPermSize=256m -Dweblogic.management.discover=true -Dwlw.iterativeDev= -Dwlw.testConsole= -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=D:\Appl\Oracle\MIDDLE~1\patch_wls1030\profiles\default\sysext_manifest_classpath;D:\Appl\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\sysext_manifest_classpath;D:\Appl\Oracle\MIDDLE~1\patch_cie660\profiles\default\sysext_manifest_classpath -Dweblogic.Name=DefaultServer -Djava.security.policy=D:\Appl\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.policy weblogic.Server
    &lt;Oct 30, 2008 12:39:05 PM AST&gt; &lt;Notice&gt; &lt;WebLogicServer&gt; &lt;BEA-000395&gt; &lt;Following extensions directory contents added to the end of the classpath:
    D:\Appl\Oracle\Middleware\patch_wls1030\profiles\default\sysext_manifest_classpath\weblogic_ext_patch.jar;D:\Appl\Oracle\Middleware\wlserver_10.3\L10N\beehive_ja.jar;D:\Appl\Oracle\Middleware\wlserver_10.3\L10N\beehive_ko.jar;D:\Appl\Oracle\Middleware\wlserver_10.3\L10N\beehive_zh_CN.jar;D:\Appl\Oracle\Middleware\wlserver_10.3\L10N\beehive_zh_TW.jar;D:\Appl\Oracle\Middleware\wlserver_10.3\L10N\p13n_wls_ja.jar;D:\Appl\Oracle\Middleware\wlserver_10.3\L10N\p13n_wls_ko.jar;D:\Appl\Oracle\Middleware\wlserver_10.3\L10N\p13n_wls_zh_CN.jar;D:\Appl\Oracle\Middleware\wlserver_10.3\L10N\p13n_wls_zh_TW.jar;D:\Appl\Oracle\Middleware\wlserver_10.3\L10N\testclient_ja.jar;D:\Appl\Oracle\Middleware\wlserver_10.3\L10N\testclient_ko.jar;D:\Appl\Oracle\Middleware\wlserver_10.3\L10N\testclient_zh_CN.jar;D:\Appl\Oracle\Middleware\wlserver_10.3\L10N\testclient_zh_TW.jar;D:\Appl\Oracle\Middleware\wlserver_10.3\L10N\tuxedocontrol_ja.jar;D:\Appl\Oracle\Middleware\wlserver_10.3\L10N\tuxedocontrol_ko.jar;D:\Appl\Oracle\Middleware\wlserver_10.3\L10N\tuxedocontrol_zh_CN.jar;D:\Appl\Oracle\Middleware\wlserver_10.3\L10N\tuxedocontrol_zh_TW.jar;D:\Appl\Oracle\Middleware\wlserver_10.3\L10N\workshop_ja.jar;D:\Appl\Oracle\Middleware\wlserver_10.3\L10N\workshop_ko.jar;D:\Appl\Oracle\Middleware\wlserver_10.3\L10N\workshop_zh_CN.jar;D:\Appl\Oracle\Middleware\wlserver_10.3\L10N\workshop_zh_TW.jar&gt;
    &lt;Oct 30, 2008 12:39:05 PM AST&gt; &lt;Info&gt; &lt;WebLogicServer&gt; &lt;BEA-000377&gt; &lt;Starting WebLogic Server with Java HotSpot(TM) Client VM Version 10.0-b19 from Sun Microsystems Inc.&gt;
    &lt;Oct 30, 2008 12:39:05 PM AST&gt; &lt;Info&gt; &lt;Management&gt; &lt;BEA-141107&gt; &lt;Version: WebLogic Server Temporary Patch for CR380042 Thu Sep 11 13:33:40 PDT 2008
    WebLogic Server Temporary Patch for 7372756 Fri Sep 12 17:05:44 EDT 2008
    WebLogic Server 10.3 Mon Aug 18 22:39:18 EDT 2008 1142987 &gt;
    &lt;Oct 30, 2008 12:39:06 PM AST&gt; &lt;Notice&gt; &lt;WebLogicServer&gt; &lt;BEA-000365&gt; &lt;Server state changed to STARTING&gt;
    &lt;Oct 30, 2008 12:39:06 PM AST&gt; &lt;Info&gt; &lt;WorkManager&gt; &lt;BEA-002900&gt; &lt;Initializing self-tuning thread pool&gt;
    &lt;Oct 30, 2008 12:39:06 PM AST&gt; &lt;Notice&gt; &lt;Log Management&gt; &lt;BEA-170019&gt; &lt;The server log file D:\Appl\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.56\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log is opened. All server side log events will be written to this file.&gt;
    &lt;Oct 30, 2008 12:39:08 PM AST&gt; &lt;Notice&gt; &lt;Security&gt; &lt;BEA-090082&gt; &lt;Security initializing using security realm myrealm.&gt;
    &lt;Oct 30, 2008 12:39:11 PM AST&gt; &lt;Warning&gt; &lt;Deployer&gt; &lt;BEA-149617&gt; &lt;Non-critical internal application uddi was not deployed. Error: [Deployer:149158]No application files exist at 'D:\Appl\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\uddi.war'.&gt;
    &lt;Oct 30, 2008 12:39:11 PM AST&gt; &lt;Warning&gt; &lt;Deployer&gt; &lt;BEA-149617&gt; &lt;Non-critical internal application uddiexplorer was not deployed. Error: [Deployer:149158]No application files exist at 'D:\Appl\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\uddiexplorer.war'.&gt;
    &lt;Oct 30, 2008 12:39:11 PM AST&gt; &lt;Notice&gt; &lt;WebLogicServer&gt; &lt;BEA-000365&gt; &lt;Server state changed to STANDBY&gt;
    &lt;Oct 30, 2008 12:39:11 PM AST&gt; &lt;Notice&gt; &lt;WebLogicServer&gt; &lt;BEA-000365&gt; &lt;Server state changed to STARTING&gt;
    &lt;Oct 30, 2008 12:39:12 PM AST&gt; &lt;Notice&gt; &lt;Log Management&gt; &lt;BEA-170027&gt; &lt;The Server has established connection with the Domain level Diagnostic Service successfully.&gt;
    &lt;Oct 30, 2008 12:39:12 PM AST&gt; &lt;Notice&gt; &lt;WebLogicServer&gt; &lt;BEA-000365&gt; &lt;Server state changed to ADMIN&gt;
    &lt;Oct 30, 2008 12:39:12 PM AST&gt; &lt;Notice&gt; &lt;WebLogicServer&gt; &lt;BEA-000365&gt; &lt;Server state changed to RESUMING&gt;
    &lt;Oct 30, 2008 12:39:12 PM AST&gt; &lt;Warning&gt; &lt;Server&gt; &lt;BEA-002611&gt; &lt;Hostname "ITDEV-39", maps to multiple IP addresses: 192.168.76.1, 192.168.153.1, 10.19.37.39, 127.0.0.1&gt;
    &lt;Oct 30, 2008 12:39:12 PM AST&gt; &lt;Notice&gt; &lt;Server&gt; &lt;BEA-002613&gt; &lt;Channel "Default[3]" is now listening on 127.0.0.1:7101 for protocols iiop, t3, ldap, snmp, http.&gt;
    &lt;Oct 30, 2008 12:39:12 PM AST&gt; &lt;Notice&gt; &lt;Server&gt; &lt;BEA-002613&gt; &lt;Channel "Default" is now listening on 192.168.76.1:7101 for protocols iiop, t3, ldap, snmp, http.&gt;
    &lt;Oct 30, 2008 12:39:12 PM AST&gt; &lt;Notice&gt; &lt;Server&gt; &lt;BEA-002613&gt; &lt;Channel "Default[2]" is now listening on 10.19.37.39:7101 for protocols iiop, t3, ldap, snmp, http.&gt;
    &lt;Oct 30, 2008 12:39:12 PM AST&gt; &lt;Notice&gt; &lt;Server&gt; &lt;BEA-002613&gt; &lt;Channel "Default[1]" is now listening on 192.168.153.1:7101 for protocols iiop, t3, ldap, snmp, http.&gt;
    &lt;Oct 30, 2008 12:39:12 PM AST&gt; &lt;Notice&gt; &lt;WebLogicServer&gt; &lt;BEA-000331&gt; &lt;Started WebLogic Admin Server "DefaultServer" for domain "DefaultDomain" running in Development Mode&gt;
    &lt;Oct 30, 2008 12:39:12 PM AST&gt; &lt;Warning&gt; &lt;Server&gt; &lt;BEA-002611&gt; &lt;Hostname "localhost", maps to multiple IP addresses: 192.168.76.1, 192.168.153.1, 10.19.37.39, 127.0.0.1&gt;
    &lt;Oct 30, 2008 12:39:12 PM AST&gt; &lt;Notice&gt; &lt;WebLogicServer&gt; &lt;BEA-000365&gt; &lt;Server state changed to RUNNING&gt;
    &lt;Oct 30, 2008 12:39:12 PM AST&gt; &lt;Notice&gt; &lt;WebLogicServer&gt; &lt;BEA-000360&gt; &lt;Server started in RUNNING mode&gt;
    DefaultServer startup time: 9953 ms.
    DefaultServer started.
    [Running application HR_EJB_JPA_App on Server Instance DefaultServer...]
    Uploading credentials.
    ---- Deployment started. ---- Oct 30, 2008 12:39:14 PM
    Target platform is (Weblogic 10.3).
    Running dependency analysis...
    2008-10-30 12:39:14.937: Writing EJB JAR file to D:\Appl\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.56\o.j2ee\drs\HR_EJB_JPA_App\HR_EJB_JPA_App-EJBModel-ejb
    2008-10-30 12:39:14.984: Wrote EJB JAR file to D:\Appl\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.56\o.j2ee\drs\HR_EJB_JPA_App\HR_EJB_JPA_App-EJBModel-ejb
    2008-10-30 12:39:16.078: Writing EAR file to D:\Appl\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.56\o.j2ee\drs\HR_EJB_JPA_App
    2008-10-30 12:39:16.093: Wrote EAR file to D:\Appl\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.56\o.j2ee\drs\HR_EJB_JPA_App
    Deploying Application...
    &lt;Oct 30, 2008 12:39:17 PM AST&gt; &lt;Warning&gt; &lt;J2EE&gt; &lt;BEA-160195&gt; &lt;The application version lifecycle event listener oracle.security.jps.wls.listeners.JpsAppVersionLifecycleListener is ignored because the application HR_EJB_JPA_App is not versioned.&gt;
    Oct 30, 2008 12:39:17 PM oracle.as.jmx.framework.PortableMBeanFactory setJMXFrameworkProviderClass
    INFO: JMX Portable Framework initialized with platform SPI "class oracle.as.jmx.framework.wls.spi.JMXFrameworkProviderImpl"
    &lt;Oct 30, 2008 12:39:18 PM AST&gt; &lt;Warning&gt; &lt;EJB&gt; &lt;BEA-012035&gt; &lt;The Remote interface method: 'public abstract java.util.List oracle.HRFacade.queryEmployeesFindByName(java.lang.Object)' in EJB 'HRFacade' contains a parameter of type: 'java.lang.Object' which is not Serializable. Though the EJB 'HRFacade' has call-by-reference set to false, this parameter is not Serializable and hence will be passed by reference. A parameter can be passed using call-by-value only if the parameter type is Serializable.&gt;
    &lt;Oct 30, 2008 12:39:18 PM AST&gt; &lt;Warning&gt; &lt;EJB&gt; &lt;BEA-012035&gt; &lt;The Remote interface method: 'public abstract java.lang.Object oracle.HRFacade.persistEntity(java.lang.Object)' in EJB 'HRFacade' contains a parameter of type: 'java.lang.Object' which is not Serializable. Though the EJB 'HRFacade' has call-by-reference set to false, this parameter is not Serializable and hence will be passed by reference. A parameter can be passed using call-by-value only if the parameter type is Serializable.&gt;
    &lt;Oct 30, 2008 12:39:18 PM AST&gt; &lt;Warning&gt; &lt;EJB&gt; &lt;BEA-012035&gt; &lt;The Remote interface method: 'public abstract java.lang.Object oracle.HRFacade.mergeEntity(java.lang.Object)' in EJB 'HRFacade' contains a parameter of type: 'java.lang.Object' which is not Serializable. Though the EJB 'HRFacade' has call-by-reference set to false, this parameter is not Serializable and hence will be passed by reference. A parameter can be passed using call-by-value only if the parameter type is Serializable.&gt;
    Application Deployed Successfully.
    Elapsed time for deployment: 4 seconds
    ---- Deployment finished. ---- Oct 30, 2008 12:39:19 PM
    Run startup time: 5063 ms.
    [Application HR_EJB_JPA_App deployed to Server Instance DefaultServer]
    <strong>20.</strong> Right click <strong>HRFacadeClient</strong> and select <strong>Run</strong> from context.
    Now when I run <strong>HRFacadeClient</strong> the log shows following error.
    EJBModel.jpr - log
    [EclipseLink/JPA Client] Adding Java options: -javaagent:D:\Appl\Oracle\Middleware\jdeveloper\modules\oracle.toplink_11.1.1\eclipselink.jar
    D:\Appl\Oracle\Middleware\jdk160_05\bin\javaw.exe -client -classpath C:\JDeveloper\mywork\HR_EJB_JPA_App\.adf;C:\JDeveloper\mywork\HR_EJB_JPA_App\EJBModel\classes;D:\Appl\Oracle\Middleware\jdeveloper\modules\oracle.toplink_11.1.1\toplink.jar;D:\Appl\Oracle\Middleware\jdeveloper\modules\oracle.toplink_11.1.1\antlr.jar;D:\Appl\Oracle\Middleware\modules\com.bea.core.antlr.runtime_2.7.7.jar;D:\Appl\Oracle\Middleware\modules\javax.persistence_1.0.0.0_1-0.jar;D:\Appl\Oracle\Middleware\jdeveloper\modules\oracle.toplink_11.1.1\eclipselink.jar;D:\Appl\Oracle\Middleware\jdeveloper\modules\oracle.xdk_11.1.1\xmlparserv2.jar;D:\Appl\Oracle\Middleware\jdeveloper\modules\oracle.xdk_11.1.1\xml.jar;D:\Appl\Oracle\Middleware\modules\javax.jsf_1.2.0.0.jar;D:\Appl\Oracle\Middleware\modules\javax.ejb_3.0.1.jar;D:\Appl\Oracle\Middleware\modules\javax.enterprise.deploy_1.2.jar;D:\Appl\Oracle\Middleware\modules\javax.interceptor_1.0.jar;D:\Appl\Oracle\Middleware\modules\javax.jms_1.1.1.jar;D:\Appl\Oracle\Middleware\modules\javax.jsp_1.1.0.0_2-1.jar;D:\Appl\Oracle\Middleware\modules\javax.jws_2.0.jar;D:\Appl\Oracle\Middleware\modules\javax.activation_1.1.0.0_1-1.jar;D:\Appl\Oracle\Middleware\modules\javax.mail_1.1.0.0_1-1.jar;D:\Appl\Oracle\Middleware\modules\javax.xml.soap_1.3.1.0.jar;D:\Appl\Oracle\Middleware\modules\javax.xml.rpc_1.2.1.jar;D:\Appl\Oracle\Middleware\modules\javax.xml.ws_2.1.1.jar;D:\Appl\Oracle\Middleware\modules\javax.management.j2ee_1.0.jar;D:\Appl\Oracle\Middleware\modules\javax.resource_1.5.1.jar;D:\Appl\Oracle\Middleware\modules\javax.servlet_1.0.0.0_2-5.jar;D:\Appl\Oracle\Middleware\modules\javax.transaction_1.0.0.0_1-1.jar;D:\Appl\Oracle\Middleware\modules\javax.xml.stream_1.1.1.0.jar;D:\Appl\Oracle\Middleware\modules\javax.security.jacc_1.0.0.0_1-1.jar;D:\Appl\Oracle\Middleware\modules\javax.xml.registry_1.0.0.0_1-0.jar;D:\Appl\Oracle\Middleware\wlserver_10.3\server\lib\weblogic.jar -DproxySet=true -DproxyHost=192.0.20.100 -DproxyPort=800 -javaagent:D:\Appl\Oracle\Middleware\jdeveloper\modules\oracle.toplink_11.1.1\eclipselink.jar -Dhttp.proxyHost=192.0.20.100 -Dhttp.proxyPort=800 -Dhttp.nonProxyHosts=*.local|10.19.37.*|localhost|10.12.36.180|*.alshaya.com -Dhttps.proxyHost=192.0.20.100 -Dhttps.proxyPort=800 -Dhttps.nonProxyHosts=*.local|10.19.37.*|localhost|10.12.36.180|*.alshaya.com oracle.HRFacadeClient
    Exception in thread "main" java.lang.AssertionError: Can not find generic method public abstract java.util.List&lt;oracle.Departments&gt; queryDepartmentsFindAll() in EJB Object
    at weblogic.ejb.container.internal.RemoteBusinessIntfProxy.getTargetMethod(RemoteBusinessIntfProxy.java:159)
    at weblogic.ejb.container.internal.RemoteBusinessIntfProxy.invoke(RemoteBusinessIntfProxy.java:53)
    at $Proxy11.queryDepartmentsFindAll(Unknown Source)
    at oracle.HRFacadeClient.main(HRFacadeClient.java:15)
    Process exited with exit code 1.
    Please guide me how to solve this error and continue with tutorial...
    Regards,
    Santhosh

    Hi Heidi,
    I tried once again to install a fresh instance of Oracle soa suite 10.1.3.0 and upgraded it to 10.1.3.4 successfully. I did all the JDeveloper 11g installation and configure SOA process all successfully. I can create a connection to OC4J using 12401 RMI port successfully but none of my applications are deployed to server.
    This message is repeatedly displaying in messages tab:
    Exception returned by remote server: com.evermind.server.rmi.RMIConnectionException: Disconnected: oracle.oc4j.admin.management.shared.SharedModuleType. local class incompatible during deploy ...
    The default OC4J RMI port is 23791 but in my installation it is set to 12401 when I checked the Runtime Port option of Oracle Application Server and the connection is fine with this port but applications can not be deployed with this configuration.
    I can deploy applications on separate standalone OC4J instance successfully but not able to do it with my SOA application server.
    Any comments will be appreciated.
    Thanks again
    Esfand
    Edited by: user3788199 on Sep 8, 2008 6:50 AM

  • TS3771 My iTunes U no longer works since the update, an error message pops up saying that "This movie requires QuickTime, which is not supported by this version of iTunes." I followed the tutorial that suggests to change to from 64 to 32 bit and it didn't

    iTunes U video files no longer work on my computer since i update to Mavericks. The following message appears on the screen "This movie requires QuickTime, which is not supported by this version of iTunes." I followed a tutorial that suggested to go to Applications/iTunes/Get Info and change to 32 bit. Now my iTunes does not open at all, it says it requires 64 bit. I am a bit confused and disappointed. What should I do to get it fixed? Buy a new MacBook?

    Marcello, I am having the same problem.  When following the advice of many in the community to start iTunes in 32-bit mode, I get the following error after I have done so:
    I am running 10.9.2 on a mac mini. 
    I am hoping this will be fixed or at least a solid answer could be given that iTunes will no longer support certain types of media going foward.

  • Tutorial: Installing Windows XP 64-bit

    After the fairly crappy time I had installing the 64 bit version of Win XP on my computer and peicing together various bits of information contained in various threads on this board in order to make it work, I've decided that I'm going to attempt to write as complete a tutorial as possible detailing the install process from beginning to end in hopes that it helps prevent people from running into the same problems I did.  Anyways:
    Step 1 - Acquire a copy of Windows XP 64-bit
    Obviously you need a copy before you can install it, and you can get a free beta copy of Windows XP 64-bit Edition from here:
    http://www.microsoft.com/windowsxp/64bit/downloads/upgrade.asp
    You can either download the file (it's about 450 MB, though if you're on broadband your transfer will be over fairly quickly...microsoft.com servers always seem to offer excellent download speeds), or have physical CD's shipped to you.  Either way it doesn't cost anything, all you have to do is fill out their form, and they'll give you your stuff.
    Step 1a - Burn the .iso file to a CD
    This section is probably wholly unnecessary, but for the sake of completeness, I'll include it...
    If you had microsoft ship you a premade CD, skip this step.  However, if you downloaded your copy of Win XP 64, you'll need to burn the image file you downloaded to a CD before you can use it.  To do this, open your preferred burning software (I'd recommend using Nero), and select "Burn Image" (or the equivalent option for your software), and specify the .iso  file you downloaded as the image file to burn.  You should have your CD in a matter of minutes.
    Make certain that you note and record the CD-key contained in the e-mail microsoft sent you.  Writing this on the CD would be a good idea, as would printing out a copy of the e-mail.
    NOTE:  Do not burn the ISO file itself to a CD (i.e. create a new data CD and just drag the ISO file into the compilation window)...this will not work as it will put the file itself onto the disc, rather than the CD image contained within the ISO, which is what you want.
    Step 2 - Prepare your system
    Carefully preparing things before you attempt to install Windows XP 64 can save you a lot of headaches when install time actually comes.  
    First of all you want to make sure you have a seperate drive/partition to install Windows XP 64 onto (unless you're crazy enough to want a beta operating system to be your full-time OS...and I've seen Win XP 64 in action, and trust me, you do not want this just yet).  If you are using RAID make sure you are using the VIA controller and not the Promise controller as from what I've heard there are no 64-bit drivers out yet for the Promise RAID controller.  Also if you are using RAID, be sure to read the following thread, which details the process of putting the 64-bit RAID drivers onto a floppy disk, and follow the instructions carefully:
    https://forum-en.msi.com/index.php?threadid=40859&sid=
    Next, download all applicable drivers you can and save them in a sensible place (like c:\win64drivers).  If the driver comes in an archive, be sure to pre-extract it as well (Win XP 64 does not come with native zip/rar support).  It's okay if you don't want to get/cannot find all the drivers you'll need for your system, but at the very least make sure you download and extract the 64-bit ethernet adapter driver appropriate to your setup (most likely the RealTek RTL8169/8110 drivers), otherwise you'll be without internet (which makes downloading additional driver and program files kind of difficult).  You may also want to pre-download the installation files for some of the more essential program, like Winzip and WinRAR.  The best place I found to find 64-bit drivers is located here:
    http://www.planetamd64.com/modules/mx_pafiledb/dload.php?sid=
    Step 3 - Configure your BIOS
    Certain BIOS settings can screw up the install process, causing it to lock up at certain points, so it's worth taking the time to make sure things are set properly.
    Anyways, reboot your computer and go to the BIOS setup area, and make sure that "USB Legacy Support" is disabled, and that "Cool'n'Quiet" support is enabled...this will help reduce the chances of your installer hanging.  I found that after my install had completed I was able to re-enable USB Legacy support and have everything still work fine, but your results may vary, and different BIOS versions may have different effects on the installer.  I installed with BIOS version 1.20.
    While you're here, check your Boot Order settings and make sure that your CD/DVD drive is listed before your HDD is, and then insert your Windows XP 64 CD into the drive.  Save your settings and exit.
    Step 4 - Installing Windows XP 64
    When the computer reboots from step 3, you should see a message that says "Press any key to boot from CD..," so locate the "any" key and press it, and the windows installer will load.
    If you've done everything mentioned in the above steps, your install process should hopefully be a painless one, free of the errors and random stupid crap that caused me to spend several hours doing something that shouldn't have taken more than 30 minutes.  Select your desired install path (being careful to make sure that you're not installing over your 32-bit Windows) and enter information as requested.  If you need access to your RAID array during the install process, then be sure to press F6 when it asks you, and load the driver off of the floppy disk you created.
    If all goes well with the install Windows XP 64 should boot, and you can go and install all those handy driver files and software programs that you prepared in Step 2, and get your ethernet adapter working, and so on.  Reboot your system after installing the updated drivers, and if windows successfully loads, then congratulations, your install was successful.
    NOTE:  Do not install the MSI LiveUpdate software from the CD, as I did this and when Windwos loaded I would get a message saying "The service is not started" and when I clicked "Ok" the system would spontaneously reboot.  Disabling the software fixed this problem.
    ...I think that's all.  Let me know if I've missed anything.

    Quote
    Originally posted by Some1ne
    Here's a step-by-step description of how to install the RealTek RTL8169/8110 driver, as the process isn't quite as straightforward as it should be:
    1.  Download the Windows AMD64 Drivers available here:
    http://www.realtek.com.tw/downloads/downloads1-3.aspx?series=16&Software=True
    2.  Extract the files in the archive to somewhere like c:\win64drivers\ethernet
    3.  Once inside Win XP 64, do the following:
    a.  Click Start -> Settings -> Control Panel -> System -> Hardware -> Device Manager
    b.  Go down to the "Other Devices" section (they'll have yellow ?'s)
    c.  Right click on the ethernet controller and click "Update Driver"
    d.  Click "Install from a list or specific location (Advanced)"
    e.  Click "Dont search.  I will choose the driver to install."
    f.  Double click the "Network Adapter" entry, and then click "Have Disk..."
    g.  Select the directory which you extracted the driver files to
    i.  You will get messages saying that Windows cannot verify that the driver matches your hardware, and that the driver is not WHQL certified.  Ignore these and click "Continue"/"Install Anyways" and your RealTek RTL8169/8110 ethernet adapter will spring to life
    after i have done this the pc just stops. and if i reboot it stops at the loading screen :/ can you tell me whats wrong i got a k8t neo serie card and windows 64 bit edition
    edit: i did it :D works now

  • Can't View Live Data in DW8 Tutorial

    I am trying to view MS Access database records in a jsp page
    using Dreamweaver 8.0.2 (as part of the Cafe Townsend tutorial)
    In the Databases panel I can see the database objects. The
    test to database connection successfuly returns database records.
    However, when I click on LIVE DATA VIEW icon, a red exclamation
    mark(!) appears next to the Recordset(rs_Comment) #prior version#
    line of the Server Behaviors tab.
    When I select this line and double-click a message box
    saying: "This server behavior was created with a prior version of
    UltraDev. It will be replaced with the current version when you
    click OK in the server behavior dialog box." appears. I hit OK in
    the box, and hit OK in the Recordset dialog box that also appears.
    The exclamation marked line disappears from the Server Behavior
    tabbed pane, but the problem remains unsolved.
    I uninstalled and reinstalled DW8, but the problem persists.
    Any help would be appreciated.

    quote:
    Originally posted by:
    RogerLH
    I am trying to view MS Access database records in a jsp page
    using Dreamweaver 8.0.2 (as part of the Cafe Townsend tutorial)
    In the Databases panel I can see the database objects. The
    test to database connection successfuly returns database records.
    However, when I click on LIVE DATA VIEW icon, a red exclamation
    mark(!) appears next to the Recordset(rs_Comment) #prior version#
    line of the Server Behaviors tab.
    When I select this line and double-click a message box
    saying: "This server behavior was created with a prior version of
    UltraDev. It will be replaced with the current version when you
    click OK in the server behavior dialog box." appears. I hit OK in
    the box, and hit OK in the Recordset dialog box that also appears.
    The exclamation marked line disappears from the Server Behavior
    tabbed pane, but the problem remains unsolved.
    I installed and reinstalled DW8, but the problem persists.
    Any help would be appreciated.
    I'm new to the Forum and DW I need some help saving a file
    and then opening back up in the interface lol

  • Stuck in Tutorial 2 of David Powers tutorials "Build dynamic sites and web applications".

    PLEASE NOTE - THIS IS ANEW SESSION! Apologies to those that have contributed already but I have been unable to reply unless by email on the original session!
    ========================================================================================== ==============================
    I am very new to Dreamweaver and indeed to mySql. So, I am going through the the 3 David Powers Tutorials that are available for PHP & MySQL. I have successfully negotiated the 1st tutorial and am on the 2nd one and have got to a place where I am stalled!I am working on the file "manage_posts.php" and have got successfully "Building a simple recordset" - successfully built the Recordset via that dialog box which tests perfectly showing the contents of the news Table in MySQL. I can bind the recordset results in the page and save the file "manage_posts.php" but when I click Live View the live view fails and I get a 404 error - in other words manage_posts.php does not show the last entry of the news table! I have tried everything that I can think of including deleting manage_posts.php and starting over, but still no good!
    Can anyone advise me on this please as to waht may be wrong and how perhaps to analyse what the error may be? I would appreciate any help as it is very frustrating not to be able to progress further.

    PLEASE NOTE - THIS IS ANEW SESSION! Apologies to those that have contributed already but I have been unable to reply unless by email on the original session!
    ========================================================================================== ==============================
    I am very new to Dreamweaver and indeed to mySql. So, I am going through the the 3 David Powers Tutorials that are available for PHP & MySQL. I have successfully negotiated the 1st tutorial and am on the 2nd one and have got to a place where I am stalled!I am working on the file "manage_posts.php" and have got successfully "Building a simple recordset" - successfully built the Recordset via that dialog box which tests perfectly showing the contents of the news Table in MySQL. I can bind the recordset results in the page and save the file "manage_posts.php" but when I click Live View the live view fails and I get a 404 error - in other words manage_posts.php does not show the last entry of the news table! I have tried everything that I can think of including deleting manage_posts.php and starting over, but still no good!
    Can anyone advise me on this please as to waht may be wrong and how perhaps to analyse what the error may be? I would appreciate any help as it is very frustrating not to be able to progress further.

  • .rtf template and bi server repository failure (newbee tutorial)

    I've installed BISE1 on Windows Server 2003 and followed the tutorial. I successfully fulfilled all the excercises except the last one: the creation of Oracle BI Publisher Report from BI Server Metadata. I have created .rtf template in Word. The preview of the template is working showing data. But when I connect to BI Publisher and open From BI Server report and click View I get the message: "The report cannot be rendered because of an error, please contact the administrator." And as the error detail: String index out of range: -1
    What could be the reason of that problem? Or where to search for the solution of that problem?
    Any help for newbee will be appreciated.
    Regards
    Adam

    Hi,
    I am having the exact same issue.
    I've created a .rtf template using Oracle BI Publisher Desktop. I insert a very simple table and a very simple Chart (a bar graph) just to test it out. The table and the chart wwere showing correct data in the rtf and the pdf when I preview it on the BI server located on my local machine, and when I click on validate template in word, no errors were found. However when I run the pdf in the client BI Publisher Server, the charts doesn't show up in the pdf output while the other contents (headers, tables) are displayed correctly. If I select the html output in the client BI Publisher server, it gives the same error mention above: The report cannot be rendered because of an error, please contact the administrator." And as the error detail: String index out of range: -1
    What security configurations do I have to check? If anyone can give a more detail explanation on this will be greatly appreciated. Thanks in advance!

  • 10.5 Server : Standard Installation : Newbie Tutorial /  Setup Walk-Through

    Hello all,
    I recently setup OS X Server 10.5 for a client after doing it many times at my home. I could not have possibly done it without the help of this discussion board so thanks to everyone asking and answering questions!
    To help other server newbies easily setup Server 10.5 (as apple claims), I'm hoping to make a basic installation procedure that will always work for newbies. Right now it's not exactly "detailed" - just the basic steps to ensure success.
    Below is my setup procedure that has worked well for me (especially at my house). It's for a Standard installation; and we'll be setting up the server to include Mail (local only), iChat, VPN, File Sharing, iCal, Web Server/Wiki, Apple Remote Desktop access, and Time Machine (may not work well).
    Please let me know if I'm missing something that will help ensure this setup works as perfectly as possible on any system.
    +to help make sure this works, try using all the names i've used below (besides perhaps user names & passwords); like "server.house"+
    *1) Setup Router*
    • ensure router is properly connected to modem/internet
    • router lan address = 10.0.2.1
    • subnet mask = 255.255.255.0
    • dhcp on
    • dhcp server starts at = 10.0.2.9
    • dhcp server ends at = 10.0.2.99
    • dns server (opendns servers) = 208.67.222.222, 208.67.220.220 (not a completely necessary step, but may help ensure it works)
    • port forward to 10.0.2.2 = vpn (udp: 500, 4500; udp/tcp: 50)
    • port forward to 10.0.2.2 = ard (tcp: 5900, 5988; udp/tcp: 3283)
    *2) Install/Setup Server*
    • startup server computer with installation cd and start installation process
    • choose "Standard Installation"
    • setup administrator account with the following settings:
    user name: Administrator
    short name: admin
    password: admin
    • setup network settings (choose manual configuration):
    manual ip address = 10.0.2.2
    subnet mask = 255.255.255.0
    router = 10.0.2.1
    dns server = 10.0.2.2
    search domain = house
    • primary dns server = server.house
    • server name = server
    +choose all the services and let installation complete; wait until desktop loads+
    Verify things are initially okay:
    • Open safari, and type "server.house" in the address bar (ensure wiki appears)
    Good, now:
    • Download latest 10.5 server combo update, install, restart.
    • Run software update until all updates are installed (may require several restarts)
    • Setup a dyndns account for your server, install dyndns software (make sure it's updating via web and the ip address doesn't start with 10.x)
    *3) Setup Server Preferences*
    • open server preferences
    • go to file sharing: turn on file sharing
    • go to vpn: turn on vpn
    shared secret = somethingsecretive
    ip address range = 10.0.2.101 - 10.0.2.199
    • go to users
    • make new user(s) with all options enabled
    +you should now have all services in server preferences enabled (if not, enable them) and user names setup; for good measure, restart the computer again+
    *4) Setup Client Computers*
    +make sure client computers have all software updates installed before proceeding+
    • Open system preferences: network
    • Make a new location called "Server"
    • Set TCP/IP to DHCP
    • DNS Server = 10.0.2.2
    • Search domain = house
    • Click apply
    It's probably a good time to double check that the internet works - open Safari and google something. Good, it works.
    There are two ways to setup the client computers to connect to the server with basically no manual configuration needed:
    First way:
    Go to system preferences: accounts: select user name to associate with server: select "server account" (if available): enter appropriate info for user on server: wait a bit: restart computer
    or (if "server account" isn't available):
    Second way:
    Open finder: applications: utilities: directory utility. once opened, it should automatically find your server. if it doesn't, click the lock, click "plus sign", type = "open directory", server name = server.house, click ok
    • enter appropriate info to connect to server and ensure it's set to automatically setup all services, once finished - restart.
    *5) If the automatic setup didn't work, here's how to manually setup the client workstations:*
    Safari
    • Open Safari and type "server.house" in the address bar, enter user/pass, make sure it connects to wiki.
    iChat
    • add new jabber account
    • jabber id = [email protected]
    • server = server.house
    • port = 5222
    • kerbos = on (you can leave off if you want)
    You can test by connecting to your Jabber account
    VPN
    • open Network in system preferences
    • click lock
    • click "plus sign"
    • interface = VPN
    • vpn type = L2TP over IPSec
    • service name = server
    • server address = your dyndns address
    • click advanced
    • dns server = 10.0.2.2
    • search domain = house
    • click ok
    • click authentication
    • enter user's server password
    • enter "somethingsecretive" in "shared secret"
    • click ok - click apply
    You can test by clicking "connect" - after verified, disconnect.
    _File sharing_
    • Open finder: click "Server" under "Shared"
    • If it connects as guest, click "connect as"
    • enter your server username/password
    Drag a file to and from a folder to make sure file sharing works
    Mail
    • Add new mail account (imap)
    • Incoming mail server = server.house
    • Outgoing mail server = server.house
    • Outgoing authentication = kerberos 5 (or password)
    • user name = [email protected]
    • enter password
    Check to make sure you get the server welcome e-mail and that you can send email to other users on the server.
    *Time Machine* (very problematic at this time)
    • Open Time Machine in System Preferences
    • Click "options"
    • Eliminate as many folders as possible to keep backup times shorter; click done
    • Click "change disk"
    • Select "Server" disk; click "use for backup"
    ** I highly recommend using local SuperDuper! backups and/or Retrospect for networked backups to the server. Other options include the dot mac Backup application or online backups (google it).
    *If you have PCs on your network that you want to be able to connect to the server for file sharing*
    • Open Windows Explorer (my computer)
    • Click tools: map network drive
    • Enter "\\server\public" (or if you setup a user account on the server for the pc user(s) i think you can use "\\server\pcusername" - and follow the next two steps)
    -Click "connect using different user name"
    -Enter pc user account username/password
    • save settings
    Check to make sure the drive shows up and you can move files to/from server
    Helpful info for newbies setting up server 10.5:
    • Apple's Server Resources page with all manuals
    • Probably the most helpful newbie setup discussion
    • Probably the most helpful newbie setup discussion #2
    • Discussion about DNS
    • "Time Machine is a dog... discussion"
    • Manage Central Address Book discussion
    • Leopard to Windows Files Sharing Issues discussion
    • Lynda's 10.5 Server Training Videos (this does cost money and I haven't personally used it, but it looks very helpful)
    I hope that's a good start for people, but I'm sure some setting(s) can be tweaked or I missed something that could make this process go even more smoothly. Lets make this the definitive newbie standard installation setup tutorial.
    -Brian
    corewerkz

    Hi gikku,
    Good idea! I forgot about the web server port forwarding, that will allow the wiki to be seen over the internet.
    One question: what does adding the dyndns address to "Server Admin > web > settings > sites" actually do? I'm not too knowledgeable about Server Admin.
    Thanks,
    Brian
    corewerkz

  • HT200183 If I wanted to include apple loops in the assets of Logic project folders that are part of a tutorial available for download on a paid educational website would that be ok?

    If I wanted to include apple loops in the assets of Logic project folders that are part of a song that follows a tutorial available for download on a paid educational website would that be ok? No one would be paying for the file itself that's part of the membership. I don't want to get into any copyright problems. I understand that they are royalty free and you can include them in your music no problem but the individual loops would be in the audio folder if I saved all the assets to the project file.
    Also, would it be ok to include screen shots I take myself of apple programs in my downloadable content?
    Just trying to figure out exactly how I should go about it to avoid any legal issues.

    Hi
    trainedmind wrote:
    No one would be paying for the file itself that's part of the membership. I don't want to get into any copyright problems.
    My gut reaction is that you may well run into © issues if you re-distribute the original AppleLoops.If your customers are paying for the training, they are also paying for the content you provide, so I feel that you would be re-selling the loops.
    Given that anyone who has a copy of Logic would likely have installed all the loop content, there should be no need to distribute them with the project files. Alternatively, make your own loops.
    CCT

  • Problem with hello2 in the J2ee tutorial

    Hi all:
    I faced this problem when iam running the hello2 application I have followed the tutorial instructions and when i write the url in my browser http://localhost:8080/hello2/greeting but this error occur:
    HTTP Status 500 -
    type Exception report
    message
    description The server encountered an internal error () that prevented it from fulfilling this request.
    exception
    javax.servlet.ServletException: Wrapper cannot find servlet class servlets.GreetingServlet or a class it depends on
         org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:133)
         org.apache.catalina.valves.AccessLogValve.invoke(AccessLogValve.java:539)
         com.sun.enterprise.webservice.EjbWebServiceValve.invoke(EjbWebServiceValve.java:134)
         com.sun.enterprise.security.web.SingleSignOn.invoke(SingleSignOn.java:272)
         com.sun.enterprise.web.VirtualServerValve.invoke(VirtualServerValve.java:209)
         com.sun.enterprise.web.VirtualServerMappingValve.invoke(VirtualServerMappingValve.java:166)
         org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:165)
         org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:683)
         org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:604)
         org.apache.tomcat.util.net.TcpWorkerThread.runIt(PoolTcpEndpoint.java:542)
         org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:647)
         java.lang.Thread.run(Thread.java:595)
    root cause
    java.lang.ClassNotFoundException: servlets.GreetingServlet
         org.apache.catalina.loader.WebappClassLoader.loadClass(WebappClassLoader.java:1437)
         org.apache.catalina.loader.WebappClassLoader.loadClass(WebappClassLoader.java:1233)
         java.security.AccessController.doPrivileged(Native Method)
         org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:133)
         org.apache.catalina.valves.AccessLogValve.invoke(AccessLogValve.java:539)
         com.sun.enterprise.webservice.EjbWebServiceValve.invoke(EjbWebServiceValve.java:134)
         com.sun.enterprise.security.web.SingleSignOn.invoke(SingleSignOn.java:272)
         com.sun.enterprise.web.VirtualServerValve.invoke(VirtualServerValve.java:209)
         com.sun.enterprise.web.VirtualServerMappingValve.invoke(VirtualServerMappingValve.java:166)
         org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:165)
         org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:683)
         org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:604)
         org.apache.tomcat.util.net.TcpWorkerThread.runIt(PoolTcpEndpoint.java:542)
         org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:647)
         java.lang.Thread.run(Thread.java:595)
    note The full stack trace of the root cause is available in the Sun-Java-System/Application-Server-PE-8.0 logs.
    If any one can help i will be pleased..
    Thanks all.

    Hello,
    Are you sure that you performed all of step 5 in the instructions for packaging the example with deploytool?
    Instead of using deploytool, you can also build, package, and deploy the example by running the following commands:
    asant build
    asant create-war
    asant deploy-war
    Try this method and see it works. This will be documented in the next version of the tutorial.
    Jennifer

  • ANN: Video tutorial for defining a PHP local testing server on Windows

    I have created a video tutorial to show how to define a PHP
    local
    testing server on Windows. It's just under 8 and a half
    minutes, and can
    be found here:
    http://experts.na3.acrobat.com/phplocalsitewin/
    I made it for Windows only to avoid confusing viewers with
    too many
    bewildering choices. I'll try to make a Mac version in the
    not too
    distant future, but don't yet have video capture software for
    a Mac.
    David Powers, Adobe Community Expert
    Author, "The Essential Guide to Dreamweaver CS3" (friends of
    ED)
    Author, "PHP Solutions" (friends of ED)
    http://foundationphp.com/

    "David Powers" <[email protected]> wrote in message
    news:gfc9vd$2qt$[email protected]..
    >I have created a video tutorial to show how to define a
    PHP local testing
    >server on Windows. It's just under 8 and a half minutes,
    and can be found
    >here:
    >
    >
    http://experts.na3.acrobat.com/phplocalsitewin/
    >
    > I made it for Windows only to avoid confusing viewers
    with too many
    > bewildering choices. I'll try to make a Mac version in
    the not too distant
    > future, but don't yet have video capture software for a
    Mac.
    Great tutorial David, thanks for sharing
    Thierry
    http://www.TJKDesign.com/go/?0
    | Articles and Tutorials
    http://divahtml.com/products/scripts_dreamweaver_extensions.php
    | Extensions
    that keep your markup clean
    http://www.fourlevel.com/ |
    CSS Menus, Gallery, Tab Panels, etc

  • To Complete BLOB tutorial

    I&rsquo;m trying to finish &ldquo;Defining and Viewing BLOB Data in Oracle Application Express 3.1&rdquo; within this week.
    I&rsquo;m wandering techniques to complete within 30 minutes.
    Couple things blocked me to continue this tutorial.
    1. Altering the Table to Add BLOB Data (step 21)
    2. Viewing BLOB Data in a Report (step 16)
    _?????????????Altering the Table to Add BLOB Data (step 21) ?????????????_
    The download link produces a window that allows you to download a file but it doesn't say the name of the file or where it will be copied to. In the next section, you examine how to specify the parameters associated with the Photo column in a form and report.
    $$$$$$$$$$$$$$$$$$$$$
    The file is open in a separate window. It likes the step 14 of &lsquo;Viewing BLOB Data in a Report&rdquo;
    _????????????? Viewing BLOB Data in a Report (step 16)???????????_
    $$$$$$$$$$$$ I have following error message:
    &ldquo;OEHR_EMPLOYEES&rdquo;.&rdquo;MIMETYPE&rdquo; not found

    Hi
    Example of the script
    alter table "OEHR_EMPLOYEES" add
    ("PHOTO" BLOB NULL,
    "FILENAME" VARCHAR2(255) NULL,
    "MIMETYPE" VARCHAR2(255) NULL,
    "LAST_UPDATE_DATE" DATE NULL)
    set serverout on
    CREATE OR REPLACE DIRECTORY photo_loc AS 'C:\temp';
    create or replace
    PROCEDURE update_lob
    (p_file IN VARCHAR2, p_dir IN VARCHAR2)
    IS
    i_id NUMBER;
    v_b BLOB;
    BEGIN
    DBMS_OUTPUT.ENABLE;
    DBMS_OUTPUT.PUT_LINE('Begin updating row...');
    update oehr_employees
    set photo = EMPTY_BLOB(),
    filename='dog.gif',
    mimetype='image/gif'
    where employee_id = 101
    RETURNING photo into v_b;
    loadLOBFromBFILE_proc(v_b,p_file, p_dir);
    DBMS_OUTPUT.PUT_LINE('Row updated.');
    COMMIT;
    END update_lob;
    CREATE OR REPLACE PROCEDURE loadLOBFromBFILE_proc
    (p_dest_loc IN OUT BLOB, p_file_name IN VARCHAR2,
    p_file_dir IN VARCHAR2)
    IS
    v_src_loc BFILE := BFILENAME(p_file_dir, p_file_name);
    v_amount INTEGER := 4000;
    BEGIN
    DBMS_LOB.OPEN(v_src_loc, DBMS_LOB.LOB_READONLY);
    v_amount := DBMS_LOB.GETLENGTH(v_src_loc);
    DBMS_LOB.LOADFROMFILE(p_dest_loc, v_src_loc, v_amount);
    DBMS_LOB.CLOSE(v_src_loc);
    END loadLOBFromBFILE_proc;
    execute update_lob('dog.gif', 'PHOTO_LOC')
    Kind regards,
    Iloon

  • Tutorial Dreamweaver Cs5.5 The Missing Manual (Pg 998 - 1018) about adding dynamic data to your page

    Hallo,
    I did Tutorial: Displaying Database Info in the Missing Manual for Dreamweaver CS5.5.
    My problem is with "Editing a Recordset and Linking to a Detail Page" (which starts at pg 1002:
    I did this exercise ,over 5 times nowe, but every time with "Building the Detailed Product Page" at pg 1007, I get a bad result.
    I only get one page (the default one with productID = 1) for every link on the indexpage.
    In the adressbar (Live View) I see the right adress: for example: http://localhost/cos...hp?productID=16, but for all productID's only the detailspage for productID are shown.
    There is also a message: Notice: Use of undefined constant ‘productID’ - assumed '‘productID’' in E:\xampp\htdocs\cosmo_shop\product.php on line 34
    But I don't understand what could be wrong in this line.
    Here is the code lines 33 -48: is is about the second line:
    $varProduct_rsDetails = "32";
    if (isset($_GET[‘productID’])) {
      $varProduct_rsDetails = $_GET[‘productID’];
    mysql_select_db($database_connCosmo, $connCosmo);
    $query_rsDetails = sprintf("SELECT products.productID, products.productName, products.price, products.`description`, products.inventory, products.image, vendors.vendorName FROM products, vendors WHERE products.vendorID = vendors.vendorID AND products.productID = %s ", GetSQLValueString($varProduct_rsDetails, "int"));
    $rsDetails = mysql_query($query_rsDetails, $connCosmo) or die(mysql_error());
    $row_rsDetails = mysql_fetch_assoc($rsDetails);
    $totalRows_rsDetails = mysql_num_rows($rsDetails);
    mysql_select_db($database_connCosmo, $connCosmo);
    $query_rsCategories = "SELECT * FROM categories ORDER BY categoryName ASC";
    $rsCategories = mysql_query($query_rsCategories, $connCosmo) or die(mysql_error());
    $row_rsCategories = mysql_fetch_assoc($rsCategories);
    $totalRows_rsCategories = mysql_num_rows($rsCategories);
    ?>
    Can someone tell me what is going on here?
    Kind regards, Ans Hekerman

    I can manually type in double brackets, like this:
    $varProduct_rsDetails = "1";
    if (isset($_GET["productID"])) {
      $varProduct_rsDetails = $_GET["productID"];
    this is accepted; no syntax-error report.
    I can manually type in single brackets, like this:
    $varProduct_rsDetails = "1";
    if (isset($_GET['productID'])) {
      $varProduct_rsDetails = $_GET['productID'];
    this is also accepted; no syntax-error report.
    Dreamweaver itself made this code:
    $varProduct_rsDetails = "32";
    if (isset($_GET[‘productID’])) {
    $varProduct_rsDetails = $_GET[‘productID’];
    this was not OK; there was a syntax-error report.
    But strange enough, when I do paste this now from here, it is accepted.
    So the problem has been, that DW created code that gave a syntax error.
    I could repair it by replacing the single qoutes of DW, by typing single quotes in DW manually, or by typing in in DW manually double qoutes!!!
    So maybe everybode was right!!!
    But is was a very bad problem; maybe a "bug" of the program?
    I repeated this about 10 times before I got the solution frome this Forum.

Maybe you are looking for