Tutorial with simple CGI remote control of vis

Just got the internet toolkit and would like to control vi's with
browser.
Where can I find simple examples to get inspiration....
Thanks
Regards
Gerard D'Ans ([email protected])
Laborelec Rodestraat,125 B-1630 Linkebeek
tel 32 2 382 0568
fax 32 2 282 0241
ULB SMA ([email protected])
Blvd F D Roosevelt CP165 B-1050 Brussels
Tel 32 2 650 2515
http://www.ulb.ac.be/polytech/laborulb/index.htm

Gerard D'Ans;
You may want to check the book "Internet Applications in LabVIEW" by Jeffrey Travis.
Regards;
Enrique
www.vartortech.com

Similar Messages

Can I make pictures with iPhone5S by remote control, say bluetooth? Or by the remote controller for App TV?

Can I make pictures with iPhone5S by remote control, say Bluetooth ? Or simply by the remote controller of App TV ?
Thanks for the advise :-)

There's this app:
https://itunes.apple.com/us/app/wifi-camera-wirelessly-connect/id374351996?mt=8
I know nothing about it myself, so I can't vouch for how well it works. There may be other, similar apps available.
Regards.

Satellite Pro A100 - Resume from Sleep with IR multimedia remote control or keyboard

Hi Guys
I have dedicated my Satellite Pro A100 to be a media center that sits under the TV and can play networked media and DVD's etc.
This is using Vista.
The set up I want is that the lid is shut 24/7 365 and when I want to use it I just press "SLEEP" or power button from the remote control or keyboard and it fires up ready for action.
POINT TO NOTE. I successfully did this with my OLD Tecra M3. However was too slow for media center and vista
However I have set the power settings as I want etc, shut lid do nothing, and enabled hybrid sleep (preferred sleep).
Now I CAN put it to sleep with the multimedia keyboard or remote control. BUT can I wake it?...NO!. I have thought of everything possible....gone to device manager and made sure all the options for the remote and the keyboard and the USB reciever are set to WAKE FROM SLEEP. The only thing to wake it is the power button - which defeats the purpose of it being sat there like a dvd player.
when awake the remote and the keyboard function fine - I have made sure the batteries are recharged.
I have the latest BIOS and speaking of BIOS's there are no S3 power options I noticed , but then there werent on the M3 and that worked fine in terms of sleep and waking with the IR.
I come to the forum because although I know some older systems will not work with vista - IF the M3 will work - I am sure the twice as new and powerful A100 will.
Has anyone had this before - what have I missed it must be staring me in the face.
Thanks in advance.
P.S Also of late the touch pad has been playing up i.e the left and right clickers swap function so one second your working as normal next minute you left click and the right clikc menu appears. Reset BIOS - rebuilt - reinstalled synaptic - no difference.
When I worked in support for a big company when this started happening it wasnt good news - is it bad news?

Hi
Im not quite sure why it doesnt on your Sat Pro A100 and why it works on M3.
But fact is that Satellite Pro A100 doesnt support the FIR (Fast InfraRed) port and the
Tecra M3 supports the Fast InfraRed port.
Maybe this could be the reason why you cannot enable the notebook using the infrared multimedia remote control.
Greets

Need help with my Toshiba remote control and receiver for Qosmio G30 161

Hello to all
I have a Toshiba Qosmio G30-161 and with it I have a Toshiba remote control and a Toshiba remote control receiver, this is the first time I have used it (tried to that is), my problem is the remote is not working on the computer when I press any program buttons the computer does nothing.
I have installed four brand new AA batteries and the remote works fine its sending signals to the receiver, the receiver the detecting the remote as a red light appears every time you press a button and as for the computer I have checked the drivers and the USB is picking up the receiver as a E-home remote receiver which I have checked with Toshiba and that is correct, so all in all the remote is working, the receiver is picking up signals and the pc has detected the receiver but nothing works, I have installed remote control manager but this still has done anything. I have spoken to Toshiba help and support and the end result is they are not sure what the problem is. Can anyone help I require the remote for slideshows for customers as I??m a photographer.
Also to confirm I am running Windows XP MCE addition.
Anthony Worlock

Hi there,
this remote contol works, if you use it without any special drivers and special software, only in the Media Center.
But if you install such stuff like [WinLirc|winlirc.sourceforge.net] then you should be able to get some functions for your presentation.
Please try this tool and check if it works.
By the way: If I were you I would first read the Manual and FAQ of WinLirc before starting because its a little bit tricky to handle the program. :) (Too many settings :D)
Greets

MS Remote Desktop for Mac (v8.0.9 - 8.0.12): issue with "Session (ID #) remote control failed."

Hello,
I'm a SysAdmin for a small-med business in CO. We use a cluster of 3 RDS servers that are load-balanced with round-robin DNS and an RD Gateway. When I remote in from a PC, all works as expected. However, when I remote in from my MacPro (my main machine at home)
and try to remote control a user's session, I get this error:
Note the ID number is unique to the user's RDP session, so will vary each time.
This is 100% a bug in the "Microsoft Remote Desktop for Mac" program; I am positive of it at this point.
Does anyone from MS actually monitor these threads at all, or am I wasting my time? Thanks...

Hi,
As this happens with him specific from MRD MAC check whether he is taking RDP with IP address or hostname. Also try to uncheck the Option "Bypass RD Gateway for local address" under RDSH configuration and verify the result.
Also for more detail he can collect log from MAC side by following path.
Microsoft Remote Desktop>About Microsoft Remote Desktop>Send log via email
Hope it helps!
Thanks.
Dharmesh Solanki
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Problems with parity and flow control using visa serial

I am trying to create a basic user interface with the options that my
company uses most often for a force indicator. You can configure
the indicator over serial, as well as read the values off the
indicator. I am trying to create the user interface so that using
producer/consumer loops with events, once you change a value, it will
write that new value to the serial port, ie the device.
The problem I am having is transfering the parity and flow control
values for the serial config to the Basic read write VI. The
problem is that once the consumer loop executes, it will write the
values correctly to the VI, but then the outer loop executes 200 ms
later and clears the values. I know that this is normal behavior
and that in order to keep the values stored, normally you would use a
shift register. I tried to use this and had some issues with
correct data types/array mis-mtaches, ets, so I created an indicator
and had a local vaible read the indicator, which seems to be working
for the stop bits, read bits, baud rate, etc, but not the parity anf
flow control. I always get "blank" outputs for theses values (if
you enable the digital display you can see that they are outputing the
value 0 which correspondes to None in both cases, which is
correct). Even though it appears that it is outputting the
correct value, I get an error that says the VISA property is
invalid. I initally did a search and found that my stop bit
control was wrong (outputting double instead of integer), but I could
not find anything on the parity/flow control issue. I even tried
to copy the serial config controls from the basic serial read/write to
my dialog box and that did not work either.
I would be grateful for any suggestions.
Thanks
Kenny
Kenny
Attachments:
BGI_main pandc.zip ‏232 KB

I should add that I am using LV 8.0 and that the serial config
indicator in the consumer loop will be off the frontpanel in the final
VI so that it is not visible to the user.
Kenny

HT1619 Pairing an old remote control with a new mac

Hi. My name is Roberto. Got a new macbook pro and tried to pair it with a three year old remote control pressing the menu and fast fwd button for 5 secs with little luck! Any advise?

There are steps to pair an apple remote with your computer here: http://support.apple.com/kb/ht1619
I've been having the same difficulty as you trying to pair my new macbook air with an old remote control.
I try following the steps from the link above but when following the steps, I run into the problem where I can't find the "infrared receiver" in my Security & Privacy. It turns out that my new macbook air does not have an infrared receiver to pair with the infrared output of the remote. Therefore, my old apple remote just won't pair with my new macbook and I'm assuming this might be the same for your new macbook pro. Sorry for the bad news.

My remote Control doesn't work with my new imac

I have a brand new iMac 27" with mountain lion, and Doesn't work with my aluminium remote control, I already follow the steps on Help, but there's no IR option on the advanced button of security and privacy. Of course I already check with my iphone dock and the batteries are OK, So I think it's a bug from the OS.
Any thougths?

Thanks mende1.
Apple that, *****!!

Remote control to DVD/Video player

Controller DVD RMT-D224P After trying to view a disc unsuccessfully, which had personal photos on, I went into system menu and changed setting from DVD 3 to DVD 1. Controller went dead. Player can be operated on/off from machine. Will player other discs. Have changed batteries. Still no connection. Help needed from OAP novice to get reconnected.

Hi Jaiemie! You appear to be located in UK. Sony UK has a separate community which can be found here. Please visit it for further assistance with your Sony remote control. Thanks!
If my post answers your question, please mark it as "Accept as Solution"
http://bit.ly/LapMagWin

AUDIGY 2 ZS x REMOTE CONTROL

Hi all.
A simple question: Is it possible to mak an AUDIGY 2 ZS? work with? the remote control and USB receiver that cames with
Sound Blaster Audigy 4. Thank you

OK, let's see, you have a device that is still under warranty. You properly installed said device. You put batteries in the remote but it does not work no matter what you try. It seems to me that you have only one option and you mentioned it in the penultimate sentence in your post.
Hope it's not a long dri've.:smileyvery-happy:
Richard
Message Edited by sf3454 on 03-3-2005 03:28 AM

Remote control stopped working on MacBook Pro

I have two MacBokk Pros (2008 and 2011), with two remote controls that worked fine and interchangeable until about a week ago. Now both remotes work only on the older one of our computers, but not on the newer one. I have looked into the Security prefs panel, "Disable Infrared Receiver" is unchecked, "this computer will work with any available remote control" is shown underneath - everything look like it was before.
Holding "Menu" and "Fast Forward" to pair the remote produces no results after 5 seconds or more.
I also did the the "iSight test" mentioned elsewhere in this forum, the batteries in both remotes are fine and sending a signal.
That leads me to suspect there might be a problem with the infrared receiver. But is that a hardware or software issue and what should be done next, considering that I'm about 200 miles from the next Apple store?

Thank you! Yes, I've seen this troubleshooting page and followed those suggestion, that's where I also found the remote control battery test mentioned above.
Product ID: 0x8242
Vendor ID: 0x05ac (Apple Inc.)
Version: 0.16
Speed: Up to 1.5 Mb/sec
Manufacturer: Apple Computer, Inc.
Location ID: 0xfd110000 / 3
Current Available (mA): 500
Current Required (mA): 100
The only difference here is a "3" in the Location ID where your's shows a "2"
UPDATE: The SMC Reset tip worked! Thank you!!!

Where to buy multimedia remote control for Satellite A100-200 in UK?

Hello,
I recently bought a refurbished Toshiba A100-200 notebook from John Lewis, which, due to being refurbished, did not come with the multimedia remote control and so, at the moment, there is a huge hole on the left-hand side where it should be.
Where can I buy a new one from and how much would it cost?
Many thanks,
Ian

Hi
> did not come with the multimedia remote control and so, at the moment, there is a huge hole on the left-hand side where it should be
At the left notebooks side the Express Card slot should be placed!!!
Express card slot is upper and PC card slot is lower!!!
The remote controller can be installed in PC card slot!!! Don't mix these both slots!
But only some models are optional provided with the remote control.
If you want try to order it from the ASP as suggested above
Please note that the remote control cannot be used if the notebook is running on battery only!!!
It must be connected to AC adaptor!

Girder plugin for MSI Vox remote control

Hi!
Since I bought a VOX USB2.0 for using in my laptop I found the remote control useless cause it only works with the MSIPVS (that I don't use) and there was no plugin for it.
So, recently I had some free time and I developed a plugin that allows me to control my pc with this little remote control.
If there's someone else interested in this plugin I can make it available to download.
Samuel

Hi!
I have installed Christv v4.99, Grider and downloaded config files for VOX on Promixis site (thanks Alexis!!!). I can see that remote will work (have tried some of functions and it works) but my problem is:
Christv doesn't give me good quality picture like Fly 2000 TV. If I try to change some settings in "Program settings" then it is reflecting to CPU usage! My fun on laptop is very loud when it is hot, so it disturbs me too much
I am attaching Print screen from my current settings (pic on Christv is black but not on my PC) but if I change advanced settings for Greedy HM it doesn't remember it after shutting down Christv. If anyone have lower CPU usage and good pic quality with Christv it will be very nice if (s)he post it here
Sorry for my bad english
http://img126.imageshack.us/img126/2959/screenki7.jpg

How do I disable the headphone jack remote controls on my iMac?

HI all,
I've got an early 2009 iMac 24". I use it with an older pair of Logitech 2.1 speakers with no inline remote controls. The headphone jack itself or the 1/8" male connection is loose because the iMac will randomly launch/play/pause iTunes. I'm 100% certain this has to do with the headphone jack connection. I want to disable that remote functionality in OSX while still using my speakers, but I haven't found any documentation or information on how to do it.
Can anyone help? Thanks in advance.

You need to get the busted plug out of the headphone jack. Because there is a micro switch in-side the headphone jack that tells the MIDI setup to only send the sound out to the headphone jack.
Go to > Removing a broken headphone plug - Google Search or take it to your local AASP for service.

Remote control of ipad by hand movements

I think iPad can be remote controlled by hand movements and this is especially necessary in case when you put it on the table and want to change the page of the ebook or want to shift to another song. In such cases, you don't want to handle the iPad, just lazilyyou may want to control it by hand gestures or just say, by your voice. Such control can be made by an app, I think.

Hi John, I don't suppose you got any further with your ipad remote control issue. I'm in a similar situation with an elderly relative, and wondered if Mobile Me might help? We're in the process of setting up an iPad2 from our own iTunes account (might be a different scenario to yours if your dad has his own iTunes a/c?) and as yet don't know if we can actually do what we would like to do... ie. update apps remotely when required, download software for them. I know it's a major hand holding exercise, but at present they're out of internet loop completely and miss out so much, on things like, research/browsing, on-line offers, maps to get places, e-mail etc. And in most cases once these things are set up, interconnectivity is one button push away. So if you have any advice or pointers, they would be very much appreciated.
Also this is not on wifi, as getting broadband for someone else is another story, so it's planned just to be 3G on '3' for now. facetime would be good but don't think the 3G connection would even let you near that, and also I have no idea how much data that would eat up.

Tutorial with simple CGI remote control of vis

Similar Messages

Maybe you are looking for