Tutorials for starting with SAP Business Objects Explorer: Excel / Crystal

Hello,
we want to start with SAP Business Objects Explorer. I have been searching for tutorials for while without success.
Are there any tutorials or documentation that shows how to work with excel-files as data source or how to upload Crystal reports files (.rpt) to the Explorer?
Thanks in advance for helpful hints.
Best regards,
André

As far as I know the SAP BUsiness Explorer car retrieve data either from a universe or from the SAP BWA. So hat you should be looking for is information on how to set Excel files as data sources for universes.
Regards,
Stratos

Similar Messages

  • BI Accelerator used in combination with SAP Business Objects Explorer

    Hi ,
    If you use SAP Netweaver BWA and SAP Business Objects Explorer Blade, do you only get the full benefit with using SAP BO Explorer, or will the same queries ran in BEx 7 Anaylser also benefit from the in memory OLAP processing?
    I'm guessing that the SAP BOE Blade will only benefit SAP BOE.
    It would be great if the current BWA had the ability to in-memory the OLAP part of the processing, as then it might be worth the hassle of getting it installed.
    Thanks,
    Jamie

    Hi
    May be the note : 1384526, could give you an insight.
    Regards, Hyma
    Edited by: Hymavathi Yanamadala on Feb 25, 2010 5:13 AM

  • SAP Business Objects Explorer app Sybase SUP settings

    Hello Community,
    Is there a guide or a how to for setting up the SAP Business Objects Explorer application with Sybase Unwired Platform?
    I found a guide to setup the SAP BusinessObjects Mobile application but nothing for Explorer.
    Could someone please advise?
    Thank you
    Jared

    Hi All,
              If SUP comes is introduced in the landscape then the whole licensing structure changes then when used where we directly connect to BI server from the SAP BI app instead of introducing the SUP in the landscape.So what will be advantages of using the SUP against when we compare the licensing part in both the system landscape with SUP and without SUP.Also if we directly use the app with the BI server then apps user license will also play some role ??.I am new to the Mobile BI division and so please forgive me if i have asked some silly question and also some starter links are welcomed.
    Thanks & Regards,
    Fenil Doshi.

  • Issue for production via SAP Business Objects

    Hi all,
    I would like to create Issue for production from SAP Business Object. I am using C#.net. I did not find it in DIAPI
    Is there any way ????
    Issue is urgent
    Thanks in advance

    Hello Manish,
    IT worked for me, you can try it.
    SAPbobsCOM.Documents ldoc_RecHdr = (SAPbobsCOM.Documents)oCompany.GetBusinessObject(BoObjectTypes.oInventoryGenExit);
                   ldoc_RecHdr.DocDate = Convert.ToDateTime(DTPPostingDate.Value);
                    ldoc_RecHdr.Reference2 = txtRefNo.Text;
                    ldoc_RecHdr.Comments = richtxtRemark.Text;
                    ldoc_RecHdr.DocType = SAPbobsCOM.BoDocumentTypes.dDocument_Items;
                    for (int i = 0; i < DataGrid.RowCount; i++)
                        ldoc_RecHdr.Lines.BaseEntry = Convert.ToInt32(DataGrid.Rows[i].Cells[0].Value);
                        ldoc_RecHdr.Lines.BaseType = Convert.ToInt32("202");
                        ldoc_RecHdr.Lines.BaseLine = i;
                        ldoc_RecHdr.Lines.Quantity = Convert.ToDouble(DataGrid.Rows[i].Cells[3].Value);
                        ldoc_RecHdr.Lines.WarehouseCode = DataGrid.Rows[i].Cells[5].Value.ToString();
                        ldoc_RecHdr.Lines.Add();
                    if (ldoc_RecHdr.Add() != 0)
                        string error = oCompany.GetLastErrorDescription();
                        MessageBox.Show(error.ToString());
                    else
                        MessageBox.Show("Record Inserted Successfully!");

  • SAP Business Objects Explorer on top of SAP BW

    Dear Experts,
    My Requirement:
    -  Use BO Explorer on top of SAP BW ( no HANA, no BIA ). This is to provide the users a set of related data and they can analyse the way they want.
    Question-1:
    - What should be the BW data volume that I should keep in mind for BO Explorer to have good performance. My concern is primarily because we don't use BIA or HANA.
    Question-2:
    - Can BO Explorer directly connect to a BW Infocube/Multiprovider or it has to connect only through Universes
    Regards.

    Hi,
    I will suggest you Go for SAP Business Objects Analysis, edition for Microsoft Office,ity can connect bex query directly & Bw/Infocubes also.
    Regarding Performance we can do In BI Itself depends on Business needs,: modelling , extraction, reporting 3 levels in BI .
    For more info : Refer Below :
    FAQs for SAP BusinessObjects Analysis
    Thanks.

  • SAP PCM 7.0 Connectivity with SAP Business Objects

    Hi All
    We are trying to integrate SAP PCM 7.0 FP5 with Business Objects. The prime purpose is to fetch PCM data into Xcelsius dashboard and WebI reports via BO Universe.
    We are sruggling to understand the plugins required to do this.Since other SAP documentation states that SAP BO Connectivity pack is required which is a part of SAP BusinessObjects Profitability and Cost Management 7.5 Support Package 06
    But , we understand that SAP BO PCM75 Support pkg06 cannot be installed on SAP PCM 7.0.
    Also, Please kindly help me in understanding if SAP PCM 7.0 connectivity with BOXIR3 (without using BW NW layer) is possible or it needs to be upgraded to SAP PCM 7.5
    Thanks

    Hello Siva,
    I am thinking that you may need to deploy FTP adapter in PI to get this process work fine but not sure.
    Let's see what other experts suggest.
    Thanks,
    Siva Kumar

  • IFbA capabilities for integration with sap business workflow

    Hi Everybody,
    Here I have some questions concerning to IFbA needing your kind help ASAP:
    1, Adobe compatibility with 46C
    Any sample of solution on this, better with Business workflow running in 4.6C
    2, Content management
    How to manage a IFBA big file and attachment in workflow environment?
    3, Portal integration
    If IFBA could be integrated into IBM portal and how?
    4, Partialy data input and authorization control
    As to the IFbA used in a workflow&#65292;is it possible to set form properties and rights so that only permited users at some stage can see/change some specific fields. Here it should have some dynamic adaptability to different users, that is different users will have different experience to the same form.
    Thanks in advance!
    David

    I would like to know as well about this, did you get an answer?
    Thanks for any pointers.

  • Starting with SAP fiori & SAP screen personas ...

    Hi all,
    Actually i had a requirement from the client and want to start with SAP personas, can anyone tell me how to get started with it,
    i saw a lot of links on net but most of them were telling me only benefits of SAP personas. The thing i needed was Tutorials to start with SAP personas means how to start SAP personas, what is the transaction for this, etc.
    Please Help ....
    Thanks & Regards,
    Aayush Aggarwal

    Hi Aayush,
    Personas is an add-on that needs to be downloaded from Service market place and installed on your system. For system pre-requisites, please refer to master and configuration guides at
    SAP Screen Personas 2.0 – SAP Help Portal Page
    You can refer to application help on usage:
    http://help.sap.com/saphelp_personas200_silverlight/helpdata/en/33/30f15101d9445ee10000000a423f68/frameset.htm
    cheers
    Chinthan

  • Work book save error in SAP business objects in bi platform

    Hi,
    We are facing issue for saving workbook in SAP Business objects in bi platform.
                             While saving work book it's asking user id and passowrd and webservice URL. after entering this it's asking to enter proxy user and passowrd.
    Please suggest what is the proxy id and password we need to give here or any configuration we need to do to connect workbook with sap business objects.
    Error: Proxy error 407 and Authorization failure.
    ##Screen shot attached##
    Thanks & Regards,
    Sreekanth Reddy

    Atul,
    Check if you are able to login into Manage Servers through Central Configuration Manager.
    If thats successful, the issue is either with Krb5.ini or bscLogin.conf file.
    You can check http://service.sap.com/sap/support/notes/1631734 and download the white paper to go through the settings.
    Make sure there are no white spaces in Krb5.ini and the format is correct.

  • SAP Business Objects and IBM i White Paper available

    The "SAP Business Objects and IBM i" White Paper is available on IBM Techdocs under the follwing URL:
    [http://www.ibm.com/support/techdocs/atsmastr.nsf/WebIndex/WP101947]
    The SAP Business Objects and IBM i white paper describes how the SAP Business Objects Enterprise XI server fits into an SAP on IBM i landscape. The paper provides detailed instructions showing how to integrate data sources located on an IBM i server with SAP Business Objects.
    Feel free to post your feedback and comments.
    Thanks and Regards,
    Mirco
    Edited by: Mirco Malessa on Jul 14, 2011 1:11 PM

    Hi ,
       Please find these blogs by Ingo. This should help you.
    BusinessObjects and SAP - Installation and Configuration Part 1 of 4
    Install Part #1
    BusinessObjects and SAP - Installation and Configuration Part 2 of 4
    Install Part #2
    BusinessObjects and SAP - Installation and Configuration Part 3 of 4
    Install Part #3
    BusinessObjects and SAP - Installation and Configuration Part 4 of 4
    Install Part #4
    BusinessObjects and SAP - Configure SAP Authentication
    SAP Authentication
    BusinessObjects Integration with SAP NetWeaver BI - Technical Material
    Thanks,
    Gopi

  • SAP Business Objects Add-ins

    Hello,
    I have a computer with SAP Business Objects 4.1 SP2 and SAP PowerDesigner 16.5.3.2 (4343).
    When I try to enable SAP BusinessObjects Add-ins I get the error message "Add-in SAP BusinessObjects license check failed".
    Anyone can help ?
    Kr,
    Thierry

    Hello Marc,
    As ex-Sybase customer, I wasn't aware about a version "Standard Edition" vs another one.  I just made a control about which version is installed.
    I made a control and I confirm the following elements:
    - It isn't PowerDesigner "Standard Edition"
    - Client platform is Windows 8.1
    - I noticed a problem with "gacutil.exe" during initial installation of version 16.5.
    - Associated license is "EnterpriseArchitect"'
    - I confirm I cannot activate several add-ins such as "SAP Business Objects", "SAP HANA" and "SAP ERP"
    - I see all add-ins mentioned before in PowerDesigner add-ins menu (General options)
    Kr,
    Thierry

  • Package for Business Objects Explorer

    Hello,
    can anyone say what the "name" of the package is that we have to order to get access to ASP Business Objects Explorer software?
    We want to use the non accelerated version of Explorer first.
    I am asking here to speed up the process - I want to give the information to our account manager.
    Thanks in advance,
    André

    It is sold as an add-on.  I don't believe there is a 'package' name specifically.  Package names are usually used for the SAP ABAP or JAVA based products. But the product name you're looking for is listed on Service MarketPlace as "SBOP Explorer XI 3.2".  The Application Group name is: "SAP BusinessObjects Portfolio"

  • Integartion of Business objects explorer with ABAP ALV

    Hello all,
    We have a requirement to integrate one of our applications with business objects explorer. The complete details is as listed below:
    1. Our application basically collects feedback provided by users and then displays an ALV with all the feedback ratings received for a topic.
    2. It summarizes to the user the average rating received, number of 1star ratings , 2 star ratings etc.,
    3. Instead of showing this in the ALV format we have requirement where we want to upload this data into the Business Objects explorer so that the user has a more user-friendly and intutive display of the same data rather than in a ALV.
    Any inputs on how we can trigger business objects explorer from ABAP code and pass the data in the internal table used for ALV display to it would be very helpful.
    Warm Regards,
    Naveen M

    HI Naveen,
    there has been a demo of this by Enterprise Geeks during TechED 2009 and the code is posted on their website.
    the other option is to export the data to Excel and then use BusinessObjects Explorer in the cloud for example.
    ingo

  • SAP Business Objects Analysis for Office 1.4 on Microfost Office 64-Bit Version

    Hello,
    Has anyone installed SAP Business Objects Analysis for Office 1.4 SP6 on Microsoft Office (Excel) 64-Bit Version. I am getting message "The launcher was not able to connect Analysis Add-In. Make sure that Analysis Add-In is not disabled by Office Application".
    When I activated the Analysis Add-In, I am getting below Error: "Excel experienced a serious problem with the 'analysis' add-in." and it is forcing to disable the add-in and asking to check for if any update is available. It was working fine on 32-bit Excel version.
    Thanks,
    Ram

    Hi Tammy,
    Thanks for the response. It is working fine on 32-bit Office version (with OS 64-bit). I checked the compatibility (OSS 1466118 ) and it supports Microsoft 64-bit office version. Just wanted to see if anyone had successful installation.
    Thanks,
    Ram

  • Looking for SAP business objects technical support

    I work for Tractor supply and we have SAP, Business Objects Data integration suite.  I am trying to open a case with them for a question about AIX OSlevel compatibility with our version of DI.  But I've not been here in a long time and things have changed.  Can someone direct me to BO case management?
    thank you.

    Hi Michael
    Support can be accessed at http://support.sap.com. You will need a login to submit an incident. If you don't know what your S-user ID is please contact our customer interaction center. Their info can be found under Help> contact us on the link above.
    Hope that helps.
    Kristen

Maybe you are looking for