Tuxedo 3139 error - Secondary Event server failed!!

Hi all,
we're havin a msater/slave Tuxedo configuration. When we booted the servers, we're getting the error repeatedly in the slave logs:
3139
ERROR: Secondary Event Server failed to get a new copy of subscription database from the Primary, errstr=TPENOENT NOT FOUND
Could anyoone please explain why its happening??

Atheek,
The CMDTUX_CAT:3139 message is logged when TMSYSEVT cannot find a server
offering the ..TMSYSMIB service or when TMUSREVT cannot find a server
offering the ..TMUSRMIB service. These services are usually offered by the
primary event broker.
This message might occur if the application specifies all event broker
servers as secondary. (One of the event brokers should be started without
the -- -S option, and that server will be the primary event broker.) The
message also might occur if the primary event broker dies and is not marked
as restartable.
You can observe which servers if any offer the ..TMSYSMIB and/or ..TMUSRMIB
services by invoking tmadmin and giving the "psc -a 2" command. (The "-a 2"
option will cause the command to include service names that start with a "."
or with a "..".)
Ed
<Atheek Rahuman> wrote in message news:[email protected]..
Hi all,
we're havin a msater/slave Tuxedo configuration. When we booted the
servers, we're getting the error repeatedly in the slave logs:
3139
ERROR: Secondary Event Server failed to get a new copy of subscription
database from the Primary, errstr=TPENOENT NOT FOUND
Could anyoone please explain why its happening??

Similar Messages

TREX error 5500: NameServer error: communication with server failed

Hello TREX Gurus,
After applying the latest NW 7.0 SPS18, TREX is no longer working. We are getting this error message in the TREX Administration.
"5500: NameServer error: communication with server failed;connection refused,location=sap01:37001"
Any helps is greatly appreciated,
Dave

we have same problem... did you find a solution?
best regards

Getting error: Report Application Server failed

I started posting my problem in thread below and have been advised to continue in this forum
Reference thread: The Report Application Server failed
My problem occurs in a asp application (vb 2005) and also when I run the Crystal Report stand alone (xi rel 2).
The asp application does not render any other messages than "report Application Server Failed" but running the CR stand alone I get "error formatting cross tab object". Whenver I get this message and if I switch page setting (either from landscape to portrait or portrait to landscope) it work for the report in question.
I have now advanced a little further in trying to solve the issue or at least find what is wrong. I have created a .net windows application where I export the CR to disk
Dim DiskOpts As CrystalDecisions.Shared.DiskFileDestinationOptions = New CrystalDecisions.Shared.DiskFileDestinationOptions
myCrystalReport1.ExportOptions.ExportDestinationType = CrystalDecisions.[Shared].ExportDestinationType.DiskFile
myCrystalReport1.ExportOptions.ExportFormatType = CrystalDecisions.[Shared].ExportFormatType.PortableDocFormat
DiskOpts.DiskFileName = ReportPath & ReportName
myCrystalReport1.ExportOptions.DestinationOptions = DiskOpts
myCrystalReport1.Export()
I get the same problems, some reports will not let me export and I am getting error:
CrystalDecisions.CrystalReports.Engine.InternalException: The Report Application Server failed ---> System.Runtime.InteropServices.COMException (0x800003E5): The Report Application Server failed
   at CrystalDecisions.ReportAppServer.Controllers.ReportSourceClass.Export(ExportOptions pExportOptions, RequestContext pRequestContext)
   at CrystalDecisions.ReportSource.EromReportSourceBase.ExportToStream(ExportRequestContext reqContext)
   --- End of inner exception stack trace ---
   at CrystalDecisions.ReportAppServer.ConvertDotNetToErom.ThrowDotNetException(Exception e)
   at CrystalDecisions.ReportSource.EromReportSourceBase.ExportToStream(ExportRequestContext reqContext)
   at CrystalDecisions.CrystalReports.Engine.FormatEngine.ExportToStream(ExportRequestContext reqContext)
   at CrystalDecisions.CrystalReports.Engine.FormatEngine.Export(ExportRequestContext reqContext)
   at CrystalDecisions.CrystalReports.Engine.FormatEngine.Export()
   at CrystalDecisions.CrystalReports.Engine.ReportDocument.Export()
My default page set up is landscape and if I now reverse the page set up like: myCrystalReport1.PrintOptions.PaperOrientation = PaperOrientation.Portrait it will let me export.
My windows application exports hundreds of reports in a single run and by toggling between landscape and portrait I manage to get it working when I get an export error (like above).
Was hoping that anyone couldm point me in a good direction, I've been fighting this problems for many days now and I do not have a solution as to why this is happening. Thank you.

Hi,
The cross-tab reports that are causing this error, do they have any formatting formulas on any of the objects?
Are your using any running totals or setting the Evaluation Time using WhilePrintingRecords?
I've run into this problem with crosstabs when I created a Display String formula using Running Totals.
The report cannot render the report because the running total is conflicting with the results of the crosstab.
When you right-click an object and go to Format Field. In the Common tab if the Display String has a formula set, remove or comment it out. Do this for all the objects and try running the report again.
Good luck,
Brian

Agent Desktop Error when CCM1 server fails..

hi,
I have configured IPCCX in HA environment.. so there are two CCM servers (CCM1 and CCM2) and two IPCCX servers (IPCCX1 and IPCCX2)..i have configured extension mobility service in redundant mode...I also associated the phone with RM JTAPI provider.. every thing works fine when both ccm servers are up, means agent are able to login to both phone and the agent desktop.. but when i remove the network cable of CCM1. the phone successfully login (after some delay).. but agent desktop gives the following error..
"Login failed due to configuration error.. please ask your system administrator to associate your phone with the rmjtapi provider user id according to the instruction in the administrator guide"
Even though i have associated the RM CM Jtapi provider with the phone... this situation only occurs when i down the ccm1 server.. if both servers are up every thing works fine.... any idea about it...
Regards
Naresh Rathore

hi,
i added the ip addresses of the cucm server with the hostnames in ipccx servers on the following location and it resolved the issue.
c:\winnt\system32\drivers\etc
i entered the ip of ccm and ipccx with host names in the "host" and "lmhost" files...
Regards

Send a message error: "The sync server failed to sync with the iphone"

Itunes 11 send a message error the sync server falied to sync with the iPhone.
Itunes does not sync contacs with my iphone

i did this step. but still it says syncing failed... am having iphone 5 updated to 6.1.4 & itunes is updated to 11.0.4.. pls help!!

Error 1060 Event server, integration services.

Hola,
Actualmente tenemos un problema al momento de instalar SAP 2007. Cuando se terminado de instalar totalmente el Server tools, Server y client. El server tools tiene dos herramientas nuevas que se llaman:
Event Sender Services
Integration Services
Estas herramientas me aparecen deshabilitadas y me aparece el mensaje: "Error 1060, el servicio especificado no existe como servicio instalado". ¿Que debo instalar para que se habiliten esas herramientas?
Saludos.

Saludos Elias,
Integration services forma parte de las funcionalidades de integración de B1i. El mismo puede ser instalado en las instancia de SQL uicamente con el puerto por defecto (1433).
Deben verificar si estan utilizando una instancia diferente a la que se asigna por defecto. Ejemplo de una instancia de este tipo (YourSQLInstanceSQLExpress).
Adicionalmente les invitamos a revisar la nota 1107410, la cual documenta los detalles para configurar los puertos previo a el intento de instalación.
Esperando lo anterior les permita solventar lo reportado.
Juan Manuel Marrero
SAP Business One Forums Team

Web Gallery error: Request to Server Failed" Anyone else please?

Same error over and over.
Thanks for looking
Tom

You need to update to iPhoto 7.0.1.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

Errors in event log of Secondary DPM server protecting replicas on Primary

Hello again
I have two DPM servers, one situated on-site (primary) and one situated off-site (secondary). Protection jobs seem to be running correctly on both servers in that the jobs complete and I am able to restore data from the backups. I use the primary server
to make the initial backups of critical systems and data (Exchange MDB's etc) and the secondary server to backup those replicas off-site in case of primary site loss or DPM system loss.
The primary server is a physical server and the secondary server is a virtual server. Both DPM servers have their DPM databases stored on one physical SQL server that is in the primary site.
Basically what is happening is that every day our virtual machines are snapshotted (secondary DPM server included) and everyday the snapshot of the secondary DPM server fails. I see the following to entries in the event log of the secondary server.
Error 1:
WARNING
Source: MSDPM
Event ID: 955
The description for Event ID 955 from source MSDPM cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
The consistency check resulted in the following changes to SQL Server Agent schedules: Schedules added: 2 Schedules removed: 2 Schedules updated: 0.
Problem Details:
<ConsistencyCheck><__System><ID>26</ID><Seq>27861</Seq><TimeCreated>22/05/2014 23:01:31</TimeCreated><Source>SchedulerImpl.cs</Source><Line>719</Line><HasError>True</HasError></__System><Tags><JobSchedule
/></Tags></ConsistencyCheck>
the message resource is present but the message is not found in the string/message table
Error 2
ERROR
Source: MSDPM
Event ID: 4212
The description for Event ID 4212 from source MSDPM cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
DpmWriter service encountered an error during PrepareBackup as more than one component is selected for backup in the same snapshot set. Select a single DPM replica for backup and try the operation again.
Problem Details:
<DpmWriterEvent><__System><ID>30</ID><Seq>7</Seq><TimeCreated>23/05/2014 00:30:45</TimeCreated><Source>d:\btvsts\21011\private\product\tapebackup\dpswriter\vssfunctionality.cpp</Source><Line>438</Line><HasError>True</HasError></__System><DetailedCode>4212</DetailedCode></DpmWriterEvent>
the message resource is present but the message is not found in the string/message table
These two events are followed by another event from VMWare Tools everyday
Error 3:
WARNING
Source: VMWare Tools
Event ID: 1000
[ warning] [vmvss:vmvss] CVmSnapshotRequestor::CheckWriterStatus():1536: writer DPM Writer in failed state: res = 0x800423f4, err = 0x1, error =
Has anyone come across this before? Currently I am not quite sure what is going wrong and whether it is actually related to snapshots failing, but I want to try to fix these errors first and see what happens.
Regards

Your ar using VMware for Virtualization?
Are you trying to do an online Backup of the VM, think that will not work?
One thing i wonder, your have installed second DPM if Site one fails or goes done, but SQL for DPM2 is in Site one? try to move SQL to external site for DPM 2
Seidl Michael | http://www.techguy.at |
twitter.com/techguyat | facebook.com/techguyat

The Report Server Failed Error in Crystal Report

Dear All,
I converted one PLD to Crystal Report using the Crystal Converter tool in SAP B1 8.81 Pl00. However, when I try to preview the Crystal Report, I am getting an error "The Report Server Failed" and then SAP hangs.
Any known solution for this?
Thanks and regards,
Bharath S

Dear Bharath,
Your PL is too low. Upgrade to the latest PL will solve this problem.
Thanks,
Gordon

The server failed to load application '/LM/W3SVC/1/ROOT'.

Hi,
I'm using Crystal report XI release two with visula studio 2005. I was fcing some problem with my IIS so i reinstalled it.After reunstalling the IIS i'm not able to work withh IIS. when i checked Event log files i found the following error message:
The server failed to load application '/LM/W3SVC/1/ROOT'. The error was 'No such interface supported
I found the following link [http://support.microsoft.com/kb/286814] which tells the problem. But this link talk about the problem with crystal report 8.
how can i solve the problem with CRXI.
Thanks in advance

The MS kbase you found was very, very specific to a particular version of CR and never ever occured in any subsequent versions of CR. As you started to have the issue on reinstall of IIS, I do not see how htis issue would be caused by Crystal Reports. E.g.in this case, I believe that just because the error is the same does not mean it is the same cause.
A troubleshooting suggestion I'd have is to use the utility regmon and see what key is denying access. Regmon can be downloaded from here:
http://www.microsoft.com/technet/sysinternals/utilities/regmon.mspx
Ludek
Edited by: Ludek Uher on May 14, 2009 6:48 AM

"server failed message" when I try to get e-mail, but no problem getting online

I cannot retrieve e-mail. iPad error message is"server failed" . I can get online, however.

They are two different things. Your mailer server coul be down. Try again later.

Unable to MERGE-Err Msg "MDM Server Failed to Merge the Selected Records"

Hi Friends,
I am using a Match Strategy in the Workflow. In the START Process of the workflow I CHECK OUT the records. In the step MATCH / MERGE when I try to MERGE similar records I get the Error Message "MDM Server Failed to Merge the Selected Records".
But the same step works fine when I dont CHECK OUT (CHECK OUT = NO) the records in the START STEP. But this would not be the right way to do it, as the incoming duplicate records would be visible in the Data Manager by other users even before it is merged.
Your inputs would be greatly appreciated to tackle this problem.
Thanks.

Hi Ravi,
The workflow steps are as follows: (I am on MDM 5.5 and SP 6)
Start (Check Out)   -
> Process -
> Validate -
> Match    (Manual Merge)   -
> Approve----
> Stop    (Check In)
                                                                                The Match and Merge step is a Manual step in the Workflow.
I Check out the records when i start the Workflow and Once the entire process is complete I check in the record. What is happening is that it does not allow me to Merge the records and I get the Error message.
If i dont Check out the Incoming records and run the workflow it Merges fine. But this would not be correct as the Incoming records(whihc could be duplicates) would be visible in the system until they are merged.
Your Input woould be greatly appreciated.
Thanks in Advance.

Connection to the server failed in Gmail

Hi, I just got a replacement iPhone 5 and I Restored from a Backup after an unfortunate accident. Almost everything is there in the backup except the passwords (as i did not ecrypted the Backup).
My problem is that now I cannot access My Gmail email, calendar and Contacts. The phone keeps giving me the error "connection to server failed"!!
Has anybody had this problem before and how was it solved?
Thanks.
Carlos.

Encrpyting or not encrypting the iPhone's backup has no effect on this.
I have never encrypted my iPhone's backup and when transferring the backup for an old iPhone to a new iPhone, the passwords for my email accounts were transferred with the backup.
Have you tried deleting and recreating the Gmail account on your iPhone?

Iphoto lost all photos - request to server failed?

I have a 2011 intel iMac. It is the (supposedly) powerful 3.1ghz i5, and i upgraded the RAM to 12 Gig. Before buying this machine I had a 2008 iMac and LOVED it, it was superb. But this machine is SLOWER than that one was?! I am running OSX lion, iLife 09 and iWork 11. I am having a nightmare with this machine, it hands constantly, i only have a few apps open and still it can take 5-10 seconds (beachballing) for finder to draw my files when i open a folder. This can't be right. I have reloaded the entire machine from scratch twice by cloning files off and then MANUALLY rebuilding it (not using Migrate Assistant to ensure to i was not bringing any bad data or bugs across from old installation or old machine).
It is slow as a dog, way slower than my old iMac which had a mere 2 Gig of Ram! If i open more than 10 browser tabs in Safari it goes so slow I can't use the internet. The machine crashes at least twice a week and just hands so I have to force shutdown, and my latest error is iPhoto just lost ALL my photos, 5 years worth and gives the error "Request to server failed" but says nothing else of any use. I am hoping to recover them with TimeMachine but wait and see on that score as nothing seems to be right with this machine so no doubt TM will play up as well.
I have VMWare Fusion installed, latest version. It does seem slower when running that, but it still crashed and plays up when that is not running so I am sure that is not the source of any problems, it just makes them a bit worse due to processor usage.
Is it possible to get an iMac diagnostically checked (hardware) at an Apple store? It is still under warranty this machine, but I can't drop it off at a store without wiping all my data (clone) to external drive, because I have confidential information stored on it which I can't leave on if the machine leaves my office.
Appreciate it if anyone with any similarly bad experiences of newer iMacs could chip in and suggest any ideas. I struggled to afford to buy this machine, and thought it would sky rocket my performance and speed after my old machine started to get slow due to age, but even at its worst it was never this bad. I am now a very very disappointed Apple lover, ex-lover?!
One final point I should mention, I upgraded the RAM myself, using proper stuff from Crucial. I read that it didn't matter what order the RAM cards were fitted in, is that true or should I try moving them around?
Thanks

Thanks very much for such a quick reply, really appreciate any help I can get with this as I have basically had problems daily for months now and its really ruining my business now. I am not as techie savvy as many others on here, but will do my best.
I did everything you said and here are the results:
Activity Monitor shows top 3 (fluctuating) processes as:
shockwave flash (chrome Plug-In Host) 26% now but jumping between that and down to 8%
Google Chrome renderer 3-7%
Safari Web Content this varies usually between 2% right up to well over 100% (i have seen 120%). When machine is playing up i often see this as being over 100%.
Memory Tab:
2.1MB Pageouts
Disk Usage - free space is, have a 1TB drive so plenty of free space. 289 GB free
I looked in Console. Have never looked at that before.
I clicked "All Messages" and notice something possibly a bit odd.
There are THOUSANDS of messages like this one:
"29/05/2012 18:41:54.292 1PasswordAgent: [HYBI] socketDidDisconnect: Error Domain=GCDAsyncSocketErrorDomain Code=7 "Socket closed by remote peer" UserInfo=0x1058098d0 {NSLocalizedDescription=Socket closed by remote peer}" - I use 1Passwd to manage my passwords for browsers. There are lines and lines of these in Console messages. Looking through them, they appear every single minute of every hour, sometimes two per minute. They all look identical to this one quoted here.
Another noteworthy message in Console is:
"29/05/2012 19:21:17.000 kernel: IOSurface: buffer allocation size is zero". There was one in last few minutes, a few 20 mins ago, and some further up but not on any pattern of frequency.
Should I paste a long list in here so you can see what my console looks like?
Thanks so much

Adding secondary ADFS server to farm fails with Could Not Load Assembly error

Hi all,
I have two servers running Server 2012 R2.
There are two AD sites, in site 1, I have the primary ADFS server running on a member server. In site 2 I have a secondary ADFS server running on the only DC in the site. There will be WAP servers publishing these servers in either site.
I successfully set up the first ADFS server in site 1, and this is working ok. However, when I set up the server in site 2 I get the following error during the prerequisite checker:
Could not load file or assembly 'System.ServiceModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' or one of its dependencies. Access is denied.
Unable to retrieve configuration from the primary server. Could not load file or assembly 'System.ServiceModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' or one of its dependencies. Access is denied.
I ran this as my domain admin account and also as domain\administrator which is seldom used.
When I run the resulting PowerShell script, I get errors relating to the GSMA, so not sure if that is where my issue lies. Here is the script:
# Windows PowerShell script for AD FS Deployment
Import-Module ADFS
# Get the credential used for performaing installation/configuration of ADFS
$installationCredential = Get-Credential -Message "Enter the credential for the account used to perform the configuration."
Add-AdfsFarmNode `
-CertificateThumbprint:"Thumbprint Here" `
-Credential:$installationCredential `
-GroupServiceAccountIdentifier:"DOMAIN\STSSvc`$" `
-PrimaryComputerName:"machine.domain.net"
I tried using the FQDN of the ADFS server as well as the common name of sts.domain.net, neither worked.
Any suggestions?
Andrew Hodgson

Hi,
Thanks for your post.
According to the error message, it is more about permission issue.
Please refer to this artile about how to resolve the error "Could not load file or assembly or one of its dependencies. Access is denied"
http://blogs.msdn.com/b/sayanghosh/archive/2007/04/21/solution-to-could-not-load-file-or-assembly-or-one-of-its-dependencies-access-is-denied.aspx
Regards.
Vivian Wang

Tuxedo 3139 error - Secondary Event server failed!!

Similar Messages

Maybe you are looking for