Tuxedo 8.0 with Oracle 9i

Where can I get the information whether Tuxedo 8.0 has been certified to work with
Oracle 9i ?
Amit Kureel

Similar Messages

Oracle Tuxedo 8.1 With Oracle 11g Database

Hi,
I have an old application that must be compiled with oracle 8.1 and Oracle9i Database.
We are migrating to Oracle 11g Database, and now we have some inssues to compile with Oracle 11g Database. For example some Libraries that the Tuxedo XA Resource Manager needs from the Oracle Database, that just u can found on older versions like Oracle9i (kpudfo.o file).
what can be the solution for that problem?
An Oracle 11g database config or a Tuxedo config ?

Hi,
When you say "Tuxedo XA Resource Manager" I'm not sure what you are referring to. Do you mean the Tuxedo transaction management servers (TMS) servers that are built with the buildtms command? If so, if there are linking errors, it has to do with either your library paths or the RM definition for Oracle Database in the $TUXDIR/udataobj/RM file. Tuxedo itself only uses the XA switch from the resource manager such as Oracle database. Now the resource manager may require a bunch of libraries, which is why I suggested you check your library path. If the above doesn't help, can you post the error you are getting and what is generating/creating the error?
Regards,
Todd Little
Oracle Tuxedo Chief Architect

Need Example Tuxedo 8.1 with Oracle 9.2

Hi,
I need an example of code of RM file to setup connection to Oracle 9.2 in Tuxedo 8.1.
Also i need a simple example of a service.c or something to get one field from a table in Oracle, a ubbfile example and how to compile,and run it....
The bankapp sample is too big and complicated.
Thx to all.

Contents of file $TUXDIR/udataobj/RM:
TUXEDO/D:tuxd_switch:-lrms -lfs
TUXEDO/SQL:tuxsql_switch:-lsql -lusort -lrms -lfs
NONE:tmnull_switch:
TUXEDO/QM:tuxq_switch:-lqm -ltmib
Oracle_XA:xaosw:-L${ORACLE_HOME}/lib -lclntsh
# oracle 0920
Oracle_0920:xaosw:-L${ORACLE_HOME}/lib -lclntsh
Oracle_0920xa:xaosw:-L${ORACLE_HOME}/lib -lclntsh
A simple oracle example shouldn't be so hard to find.
Good luck,
Mariska

Using XA with Oracle ERP application

Hi,
We have two Tuxedo Domains that we need to establish global transaction:
First Domain - Tuxedo 6.4 with Oracle 8.0.6 database.
Second Domain - Tuxedo 6.4 with Oracle ERP application (Oracel version 8.0.5)
A Client that calls a Tuxedo server in the first domain this service doing some work
on the database and then calls another service in the second domain (using Domain
connection).
The service in the second Domain activate a Oracle API (package) from the ERP application.
The Rollback works but we problem with the commit. We recieve the following Oracle
Error - ORA-06574: Function "VIEW_ALL" references package state can not execute remotly.
Revital Bloom
[email protected]

Subbu,
As I mentioned earlier in this thread, support for Oracle RAC has been
implemented in Tuxedo 9.1 and in the Tuxedo 8.1 and Tuxedo 9.0 rolling patch
streams. There are no plans to backport this feature to Tuxedo 8.0. If you
plan to use RAC transactionally and if it is possible for multiple services
that could be located on different RAC instances to be accessed in a single
transaction (which will be true for most applications), then you should
upgrade to a version of Tuxedo with support for Oracle RAC. The
documentation at http://e-docs.bea.com/tuxedo/tux91/ads/adorac.htm#248431
gives an overview of RAC support in Tuxedo.
Ed
<Subramonian Arumugom> wrote in message news:[email protected]..
Hello Nadeer, Hello Ed,
Has the implementation of Tuxedo8.0 with Oracle RAC was completed
successfully ?.
If it is done , I have few doubts. Could you please help me ?.
1) I hope your Tuxedo middleware connects to the oracle Database using
Oracle XA resource manager and the TMS server built using buildtms with
oracle as RM .As per the mail from Ed, migration of Tuxedo9.1 should be done
before moving to Oracle RAC.
Also from BEA documentation, Oracle RAC support was given as new feature in
Tuxedo9.1.
Our Application uses Oracle RM to connect to Oracle DB[ Oracle 10g] from
Tuxedo8.0. So do we need to upgrade to Tuxedo9.1. for using Oracle RAC ?.
Thanks for your help
Best Regards
Subbu
#9880278452
Edited by subramonian.a at 04/16/2007 12:15 AM
Edited by subramonian.a at 04/16/2007 12:19 AM
Edited by subramonian.a at 04/16/2007 1:37 AM
Edited by subramonian.a at 04/16/2007 8:20 AM

How configure Tuxedo 8.1 to Oracle RAC 9.1

I need to configure Tuxedo 8.1 to work with Oracle RAC 9i, I saw that there's documentation to configure for Tuxedo 9i with Oracle RAC 10g. But this is not my scenario. If someone know how to do this, could send me some documentation or example to apply this. I already read ads.pdf from BEA dev2dev site and this documentation don't talk about Oracle 9i

Weverton,
Later versions of Oracle contain significant RAC-related features not
present in earlier versions of RAC, so Tuxedo
(For example, Oracle 10gR2 contains support for DTP services, and Oracle
10.1.0.3 contains support for Fast Application Notification.)
Because one or more of these features is required for RAC migration and
recovery in Tuxedo, Tuxedo offers support only for Oracle 10.1.0.3 and above
for general RAC architectures. (However, there are some specialized RAC
application architectures, such as architectures where only a single service
is called in each transaction and architectures where transactions are not
used where Tuxedo can work with Oracle 9i.) Significant improvements in
RAC have occurred with each Oracle release, so if it is possible to upgrade
to Oracle 10gR2 then you should do so.
Ed
<Weverton Castanho> wrote in message news:[email protected]..
I need to configure Tuxedo 8.1 to work with Oracle RAC 9i, I saw that
there's documentation to configure for Tuxedo 9i with Oracle RAC 10g. But
this is not my scenario. If someone know how to do this, could send me some
documentation or example to apply this. I already read ads.pdf from BEA
dev2dev site and this documentation don't talk about Oracle 9i

Using Tuxedo with Oracle Real Application Clusters (RAC)

Hi all ,
Our present Producation environment is Tuxedo8.0 with Oracle 9i as database .
We are planning to implement oracle RAC .
Can any one tell us , with the current tuxedo version which is 8.0 ,can we for RAC Or we need to upgrade Tuxedo to 9.1 for RAC Implementation?
If anyone has Implemented Tuxedo and Oracle with RAC successfully
Pls share your experience.
Thanks In Adavance
Nadeer .

Subbu,
As I mentioned earlier in this thread, support for Oracle RAC has been
implemented in Tuxedo 9.1 and in the Tuxedo 8.1 and Tuxedo 9.0 rolling patch
streams. There are no plans to backport this feature to Tuxedo 8.0. If you
plan to use RAC transactionally and if it is possible for multiple services
that could be located on different RAC instances to be accessed in a single
transaction (which will be true for most applications), then you should
upgrade to a version of Tuxedo with support for Oracle RAC. The
documentation at http://e-docs.bea.com/tuxedo/tux91/ads/adorac.htm#248431
gives an overview of RAC support in Tuxedo.
Ed
<Subramonian Arumugom> wrote in message news:[email protected]..
Hello Nadeer, Hello Ed,
Has the implementation of Tuxedo8.0 with Oracle RAC was completed
successfully ?.
If it is done , I have few doubts. Could you please help me ?.
1) I hope your Tuxedo middleware connects to the oracle Database using
Oracle XA resource manager and the TMS server built using buildtms with
oracle as RM .As per the mail from Ed, migration of Tuxedo9.1 should be done
before moving to Oracle RAC.
Also from BEA documentation, Oracle RAC support was given as new feature in
Tuxedo9.1.
Our Application uses Oracle RM to connect to Oracle DB[ Oracle 10g] from
Tuxedo8.0. So do we need to upgrade to Tuxedo9.1. for using Oracle RAC ?.
Thanks for your help
Best Regards
Subbu
#9880278452
Edited by subramonian.a at 04/16/2007 12:15 AM
Edited by subramonian.a at 04/16/2007 12:19 AM
Edited by subramonian.a at 04/16/2007 1:37 AM
Edited by subramonian.a at 04/16/2007 8:20 AM

Unable to boot bankapp servers with Oracle 8.1.7 in windows2000

Hello,I tried to run bankapp examples with oracle 8.1.7 in windows2000. But when
I booted the servers using tmboot, there are some errors.(1)I used the following
RM entries:Oracle_XA;xaosw;D:\Oracle\Ora81\precomp\lib\msvc\oraSQL8.lib D:\Oracle\Ora81\precomp\lib\msvc\oraSQX8.lib
D:\Oracle\Ora81\RDBMS\xa\ORAXA8.lib (2)The OPENINFO string in the ubbshm file
is:DEFAULT:TMSNAME=TMS_ORA TMSCOUNT=2 LMID=SITE1
BANKB1 GRPNO=1 OPENINFO="Oracle_XA:Oracle_XA+Acc=P/scott/tiger+SesTm=100+LogDir=.+MaxCur=5"(3)the
follow is the error message when I booted the servers:
.. 174841.GLOBALDB!BALC.852.2572.0: 07-26-2001: Tuxedo Version 8.0 32-bit Windows.
174841.GLOBALDB!BALC.852.2572.0: LIBTUX_CAT:262: INFO: Standard main starting
174841.GLOBALDB!BALC.852.2572.0: LIBTUX_CAT:466: ERROR: tpopen TPERMERR xa_open
returned XAER_RMERR
174841.GLOBALDB!BALC.852.2572.0: tpsvrinit: failed to open database due to
174841.GLOBALDB!BALC.852.2572.0: tpopen failed, tperrno: 16
174841.GLOBALDB!BALC.852.2572.0: LIBTUX_CAT:250: ERROR: tpsvrinit() failed
174841.GLOBALDB!tmboot.480.548.-2: CMDTUX_CAT:825: ERROR: Process BALC at SITE1
failed with /T tperrno (TPERMERR - resource manager error) ...
Can anyone help? Thanks a lot!
Best Regards
Lily

I found the answer myself in an earlier post.
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by The Oracle Reports Team:
Reports 6i will connect to Oracle8i, however you need to connect over Net8 - i.e. on the database side, you need to set up the TNS listener to accept connections, and on the Reports side (which, incidentally, needs to be installed in a separate Oracle_home) you need to configure the tnsnames.ora file to connect to the 'remote' database (since it is in a different oracle_home, to all intents and purposes it may as well be on another machine - it's all considered 'remote').
Regards
The Oracle Reports Team http://technet.oracle.com <HR></BLOCKQUOTE>
null

Tuxedo 8.0 and Oracle patch 9.2.0.8

Hi,
We have installed Oracle patch 9.2.0.8 into UNIX machine. We are using Tuxedo for middleware that using an API Application through Tuxedo to provision onto Oracle database.
Since Oracle patch 9.2.0.8 installed, Tuxedo produced core file.
It has been mentioned by Oracle Metalink Doc ID 455832.1 that potentially because both server and client have to be in synch version. The Oracle patch has been installed on UNIX server for both
My question is that:
- Is there any Oracle client on Tuxedo (8.0) patch that need to be installed ?
- Or should we upgrade Tuxedo to later version, if yes which version that in synch with Oracle patch 9.2.0.8 ?
At the moment no workarround is applied.
Thank in advance for any info and help.
--Age

Hi Todd,
Thank you for your usefull answer. I will take this point with our application's vendor.
Do you know if we would like to upgrade to a higher version or best to the latest 10gR3, is there any contact Support that we can contact to get software kit (weblink for download etc.). I am not sure the license contract agreement of our company, in parallel I would like to know the procedure from your side (Oracle Tuxedo).
Regards,
--Age

Distributed ttransaction with Oracle and MQseries

Hi,
I am leveraging a Tuxedo architecture on HP-UX IA64 that utilizes two XA resource managers, MQSeries and Oracle. The use of the resource managers is based on a coordinated 2 phase commit method (TPBEGIN - TPCOMMIT).
The application running on tuxedo has beem migrated from Mainframe environment (z/OS + CICS + DB2 + MQ)
The systems functionally works, , but we continue to experience major performance issues, caused by the fact that in the original application migrated from the CICS environment executes an high number of syncpoint(s).
What is observable is that increasing the number of parallel processes (tuxedo servers), the cost of the single syncpoint is much greater than the cost of an atomic elaboration (atomicity) of that same transaction.
Ex., if the cost of an elaborated transaction is 2 ms, the cost of syncpoint is 30 ms.
Because we were not able to solve the proble just changing configuration parameters, in this specific case, we have simply reduced the number of syncpoints executed by the application so to lower the cost of syncpoint to the same rate as a transaction.
Is it possible to have a reference or information on similar use cases of mission-critical Tuxedo/UNIX environments with high volumes? (Millions of transactions)?
Is it possible to understand if there are parameters that can be set/established at a configuration level in Tuxedo (ubbconfig or others) to deal with the above-stated issue?
Thanks in advance for any helpful feedback
Regards
Roberto

There are a couple of major and minor mistakes in your listener.ora like specifying 2 times the listener name LISTENER. Using 2 different hostnames on the same machine or specifying the ENVS=LD_LIBRARY_PATH for a Windows Gateway as well as the executable you defined.
I tried to summarize it in your original thread bust recommend you to log a service request.

Error while installing Oracle Apps server 10.1.3 with Oracle DB 11.2.0.2

Error while installing Oracle Apps server 10.1.3 with Oracle DB 11.2.0.2 residing in the same server and being used by Apps server as it's metadata.
bash-3.00$ export ORACLE_HOME=/data/ora11g/app/ora11g/product/11.2.0
bash-3.00$ cd /data/OAS/install/soa_schemas/irca/
bash-3.00$ ./irca.sh
Integration Repository Creation Assistant (IRCA) 10.1.3.1.0
(c) Copyright 2006 Oracle Corporation. All rights reserved.
ERROR: Cannot find library - /data/ora11g/app/ora11g/product/11.2.0/jdbc/lib/ojdbc14.jar
Please verify that the ORACLE_HOME is set correctly.
bash-3.00$

Hi Craig,
Database 11gR2 could be used for Installing Application Server 10.1.3.x but with some limitation.
So please review the note:-887365.1 Oracle Database 11g Release 2 (11.2) Certification for Oracle Application Server 10g (10.1.2, 10.1.3, 10.1.4)
Section :- Oracle Application Server 10g Release 3 (10.1.3)
Regards,
Praaksh.

Install Solution Manager in RedHat Enterprise 6 with Oracle 11

Hello ,
In the marketplace-PAM, RedHat Enterprise 6 is not listed as approved for EHP1 Solution Manager 7.0 64 bit (unicode) with Oracle.
Does anyone have any information on this subject?
Has anyone installed the Solution Manager 7.0/Oracle with RedHat Enterprise 6?
tks

Yes, you are correct. Apart from PAM, following Note confirms this. RHEL 6 is not supported yet for Oracle, is in planning stage.
Note 1565179 - SAP software and Oracle Linux
Thanks

Registering a Partner application with Oracle SSO 10gR2

Hi Everybody
I'd like to ask a question around registering a partner application with Oracle SSO.
I have entered my home_url, logout_url and cancel_url e.g. home_url is https://vevopuitest1.co.uk/vevo_test1 and so on for the other fields.
When I save the details some information is automatically created e.g. Site Id, Site Token etc.
The bit that I am particularly interested in are the fields Single Sign-On URL and Single Sign-Off URL.
For my purposes these fields are respectively: https://cwassotest1.co.uk/pls/orasso/orasso.wwsso_app_admin.ls_login and https://cwassotest1.co.uk/pls/orasso/orasso.wwsso_app_admin.ls_logout
My questions are:
1. Where do these values come from?
2. Can I view them anywhere, say, in Oracle Directory Manager or using ldif queries?
I would like to be able to verify these values.
Many Thanks
Andy

I'm afraid this won't answer your question completely, but AFAIK in principle it does not matter on which machine SSO is running, as long as it passes the user id and credentials properly through the HTTP Header. Even more: in practice it is very common to have SSO running on a different machine than where your app runs.
So what I would do is find out how to use ADF Faces with SSO. Perhaps someone else can provide pointers on that.
Jan Kettenis

Forms 6.0 how to query clob column with oracle 9.2 DB

hi every body,
i made install for oracle 9.2 oracle DB every thing goes ok but when i made query in my form version 6.0 which have CLOB column the form closed automatically without any message?
and just for know when i run the same form with oracle 8.1.7 DB the form made query normally without any problem.
i want your help please.
Message was edited by:
mshaqalaih

I know there was a problem in 6i where you would get a crash if your query returned more than {Max Length} characters of the field representing the CLOB column.

Using Java Access bridge (Accessibility) with oracle forms 6.0 client

I'm trying to use JAB (java Access bridge ) to capture events in oracle forms 6.0 client .
I've a Jinitiator 1.1.8 and JRE version 1.4x
I've configured JAB as per the installation guide . However the events don't surface in Java Monkey .
Has anybody encountered similar issue ? what is the solution for the issue ??
Also on one of the forums I read Jinitiator 1.3x and above is automatically recognised by Java Access bridge .
For jinitiator version less than 1.3 manual configuration is required . however I haven;'t been able to find any on the oracle forms KB
Also here is the excerpt from the link http://www.oracle.com/us/corporate/accessibility/faqs/index.html
Q: Are there special steps for using Java-based applications with assistive technology?
A: If the Oracle application is written in Java, such as JDeveloper or Oracle Forms (runtime), customers must first install the latest version of Sun's Java Access Bridge. The Java Access Bridge provides the integration with screen readers such as JAWS or SuperNova that support Java. You just download the Access Bridge and install it. Sun's AccessBridge 2.0x recognizes Oracle's JInitiator 1.3x and above so no manual configuration steps are necessary. The Access Bridge is available from: http://java.sun.com/products/accessbridge. At the time this document was written, Access Bridge 2.0.1 is the most current publicly available production release; Oracle recommends upgrading to this version. Sun's AccessBridge is bundled with Oracle Universal Installer (OUI) and can be found in the Java Runtime Engine (JRE). More information for configuring such products is in the respective product documentation, or on http://www.oracle.com/us/corporate/accessibility/products/index.html.
Edited by: 974810 on 4 Dec, 2012 1:10 AM

ODP.NET requires Oracle Client 9.2 or higher.
You can find additional information about ODP.NET from the FAQ:
http://www.oracle.com/technology/tech/windows/odpnet/faq.html
and the ODP.NET homepage:
http://www.oracle.com/technology/tech/windows/odpnet/index.html
Hope that helps,
Mark

Using long vs. clob datatype with Oracle 8.1.7 and interMedia

I am trying to determine the best datatype to use for a column I
wish to search using the interMedia contains() function. I am
developing a 100% java application using Oracle 8.1.7 on Linux.
I'd prefer to use the standard JDBC API's for PreparedStatement,
and not have to use Oracle extensions if possible. I've
discovered that there are limitations in the support for LOB's
in Oracle's 100% java driver. The PreparedStatement methods
like setAsciiStream() and setCharacterStream() are documented to
have flaws that may result in the corruption of data. I have
also noticed that socket exceptions sometimes occur when a large
amount of data is transferred. If I use the long datatype for
my table column, the setCharacterStream() method seems to
transfer the data correctly. When I try to search this column
using the interMedia contains() function, I get strange
results. If I run my search on Oracle 8.1.6 for Windows, the
results seem to be correct. If I run the same search on Oracle
8.1.7 for Linux, the results are usually incorrect. The same
searches seem to work correctly on both boxes when I change the
column type from long to clob. Using the clob type may not be
an option for me since the standard JDBC API's to transfer data
into internal clob fields are broken, and I may need to stick
with standard JDBC API's. My customer wishes to purchase a
version of Oracle for Linux that will allow us to implement the
search capability he requires. Any guidance would be greatly
appreciated.

I've finally solved it!
I downloaded the following jre from blackdown:
jre118_v3-glibc-2.1.3-DYNMOTIF.tar.bz2
It's the only one that seems to work (and god, have I tried them all!)
I've no idea what the DYNMOTIF means (apart from being something to do with Motif - but you don't have to be a linux guru to work that out ;)) - but, hell, it works.
And after sitting in front of this machine for 3 days trying to deal with Oracle's, frankly PATHETIC install, that's so full of holes and bugs, that's all I care about..
The one bundled with Oracle 8.1.7 doesn't work with Linux redhat 6.2EE.
Don't oracle test their software?
Anyway I'm happy now, and I'm leaving this in case anybody else has the same problem.
Thanks for everyone's help.

Tuxedo 8.0 with Oracle 9i

Similar Messages

Maybe you are looking for