Tuxedo reboot on many users

Hi guys,
I'm working on a server with 3 users using Tuxedo.
At this moment, I'm trying to reboot it on those 3 users using tmshutdown and tmboot. It's working fine when I connect on the good user.
I first tried to use a batch on Windows, executing the commands using SSH by connecting to the 3 users(as I do for shell scripts).
It didn't work, and I thought I could try doing a shell script on the server to do it. What I did.
The problem is, as for Windows batch, that I can't run the 2 commands by this way. The error I encounter is :
dvedvw52(ad09cap1):/exec/applis/09cdvlpt/SHELLS_COMMUNS_SFC>sudo -u ad09cap2 /exec/products/tuxedo/v10.0/bin/tmshutdown
Could not load program /exec/products/tuxedo/v10.0/bin/tmshutdown:
Dependent module libgpnet.so could not be loaded.
Could not load module libgpnet.so.
System error: No such file or directory
I hoped changing some environment variables could work, but it doesn't, or I just don't use the good way to do it.
Any idea ?
Thanks

Hi,
Can you login using ssh manually and shutdown/reboot the application? If so, what steps are your taking to do that. In general there are a number of environment variables in the tux.env file located in the Tuxedo installation directory. This script sets up almost all the required Tuxedo environment variables other than the ones that are application specific. After executing that script, you should at least be able to execute tmadmin or tmboot and get an error message to the effect that TUXCONFIG isn't set or that that no BBL is available on the site. Getting an error about a missing .so file indicates that LD_LIBRARY_PATH or PATH are not set correctly. If this is all on the same host, the only environment variables that have to change between applications are TUXCONFIG and APPDIR. There are a number of other environment variables that may need to be set, but they should only affect the application, and not the ability to run Tuxedo command line tools.
Regards,
Todd Little
Oracle Tuxedo Chief Architect

Similar Messages

Can't connect to Server - "too many users" after 10.8 install

After upgrading my Retina MBP, my Air, and my mid-2011 iMac (which acts as a file server) to Mountain Lion, I find I cannot consistently connect to the iMac server. Everything is done over an Airport Extreme wifi network, and there were no issues in 10.7. It usually happens 24-48 hours after a retstart, and a restart will fix it though that is inconvenient. The error given on the machine trying to connect in is "too many users" on the host (the iMac server). Any thoughts?

Me too... similar setup. MBPr, MBP and an old MB with a Mini/drobo as a file server. A reboot fixes it, but that's a pain if I'm not home.
I have noticed that I can usually share the screen even if I can't mount a drive, which helps, but still just another hurtle.

Crystal Crashing when many users

Hello,
I am having an issue with the code below:
            try
                crystalReport.Load(rptFilePath);
            catch (Exception ex)
                return("Error Loading Crystal RPT File (" + rptFilePath + "): " + ex.Message);
It works fine usually, but when I get many users trying to run a report at same time I get an Exception:
"Load report failed".
Furthermore once I get this exception it looks like no other users can run reports (as if the report component crashed).
I have to either reboot IIS or wait some time and it looks like the Crystal Component recovers on it's own.
I was warned that by using this free Crystal VS Component, I can only have max of 4 concurrent users calling it at the same time.
Is that the correct number about 4???
So I understand it is giving errors under heavy usage.
But it seems that t is also crashing after the first heavy usage and then no longer works after that.
Is there a way to make it recover without rebooting IIS or waiting a long time?
Thanks,
Yury

Hey Ludek,
Thank you for your response!
As far as:
2) You are launching too many Print Jobs (see below)
All my reports DO NOT have any Subreports. They just have Groups & Detail(s).
Output as PDF or Excel. So I do not think that it is issue, right?
1) You are not using .Close and .Dispose on the report objects once you are done with them.
I AM NOT using .Close and .Dispose so this sounds like the issue.
Please see my simple code below.
So do I just add 2 more lines at end?
            crystalReport.Close();
            crystalReport.Dispose();
Is that it or there something else I should be doing?
Thanks,
Yury
CODE
            ReportDocument crystalReport;
            string rptFilePath = System.Web.HttpContext.Current.Server.MapPath("~/Crystal/" + rptFileName);
            MemoryStream mStream;
            crystalReport = new ReportDocument();
            crystalReport.Load(rptFilePath);
            crystalReport.SetDataSource(DS.Tables[0]);
            mStream = (MemoryStream)crystalReport.ExportToStream(ExportFormatType.PortableDocFormat);

How many users can you have on one account ?

Hi,
I have just created a ID with Adobe Reader for a group to use files stored in cloud. I would like to know how many users can access the account at one time via, mobile devices, ipad, desktops ?

I don't know if there is a limit; you do mean the free https://cloud.acrobat.com/ ?
I will move your post to the Acrobat.com forum, where someone hopefully can give you a definitive answer.

How to create many user in the same database

hi
my question is "How to create many user in the same database(application)?"
for example, i have students, teachers, and staffs user using my application.
i can create many users to use the same application right?, how ^^''' ???
(right now i can only create application and then it shows every data in my DB
but i want it to show only the data for the user who login to that application)
Thanks.
ps. i'm newbie, please help T^T

You need to create a user table within your application that maintains their privileges. If you have LDAP you could use this for authorisation otherwise the table would handle that as well (store passwords etc). Your reports etc would then be filtered on information from this table.
Check out some of the sample applications to see how authorisation and access is implemented (Online store is one). The how-to on the issue tracking system should also have some useful pointers.
http://download-west.oracle.com/docs/cd/B31036_01/doc/appdev.22/b28839/issue_track.htm#BABBGBJG
cheers,
Ron

How to know how many users uses Report Designer?

Dear Experts,
Somebody knows if it's possible to know how many users have made look ups in Report Designer on one period or how many modifications?
Thanks in advance.

Hi,
If the cube is checked for Statistics, there is a option settings for BI Statistics under tools, then all the user related info is stored in Techincal Content Cubes. Based on TCT(technical Content Cubes), you need to create a report based on the requirement. From then we can know user log info for the particular queries.
Hope this helped you
Thanks
PT

How far will the extreme reach and how many users can be on there at the same time?

How far will the airport extreme reach and how many users can be on there at the same time?

Last question first, since that is the easy one......approximately 50 (fifty) users for wireless depending on how active each user might be.
The first question is much more difficult, as distance is not really the issue with wireless.....obstructions are the issue.
A wireless signal can easily travel 300 feet or more with no obstructions in the signal path.
But, a typical wall of sheetrock or wallboard in a home will absorb....on average....15-20% of the wireless signal. Brick or adobe will obviously absorb much more. A ceiling....because it is thicker....will absorb about 25-35% of the signal.
So, if the wireless signal must pass through several walls and a ceiling, there won't be much, if any, of the signal left....even though the distance that the signal travels is not great...for example, 20-25 feet.
Other wireless networks around you at the neighbors can also affect the relative strength of the wireless signal.
The bottom line....locate the AirPort Extreme where wireless devices will receive a signal with the least amount of obstructions in the signal path. Your actual performance cannot be predicted in advance. You will not know how well the AirPort Extreme works for you until you try it out in your home.
If you find that the signal does not reach as far as needed, you will need to add additional "extenders", like an AirPort Express to provide more signal coverage.

How many users can 1 Xserve support?

I have one Xserve (10.5.2, 2x3GHz, 5GB RAM, 1.34TB RAID 5) that I want to support the following services for my SMB:
DNS, DHCP
AFP, NFS, SMB
Open Directory
Print
Software Update
I also want to have mobile sync'd network home folders, but only for ~/Documents and iCals and Address Books (I don't want everyone's MP3s or family photos).
I occasionally will use NetBoot/NetInstall, but only 1-2 users at once.
I am getting ready to migrate my company to OpenDirectory and 10.5.2 for all users and was hoping someone here might be able to tell me how many users I can reasonably support with one Xserve.
Also, is it a bad idea to have everyone using "mobile" accounts? It seems like it would be less strain on the server to have the occasional sync from users than everyone reading & writing all the time. Also, if anything happened, there would be a local copy and a remote copy of any files.
Thanks.

Rosemarie,
BeehiveOnline currently supports 95,000 users and we have groups on the system as large as 10,000, that is probably about as big as we want to go - remember collaborating with 10,000 users is not an effective way of working - maybe a more open way of delivering content may be more appropriate. Given that the only issues we have with very large groups is the time it takes to run and the email traffic it generates as the large group are processed.
So it is possible to host 10,000 in a group but we need to be warned in advance and work with you to minimise the impact as the group is set up.
Phil

How many Users online at any one time?

Is there any better (/more accurate) way of determining how many users are using Planning at any one time then "Administration >Application>Statistics"?
I've been using the Statistics up until now but it's hardly fit for purpose. The timings look dubious and the same users can be there 20+ times in the same list.
It's not a deal breaker, but would be nice to see if anyone else had any hints on this.
Regards
Ed

Even after a reset the numbers look very weird. Apparently it's been 6 weeks since I last accessed Planning... I should be fired!
Slightly off topic: My Supporting Detail Detection Cache Usage is at 100%, am I right in thinking I should DECREASE the cache size in the Application Properties as per the Documentation (http://download.oracle.com/docs/cd/E17236_01/epm.1112/hp_admin.pdf - P83)?
Sounds wrong to me.
Any ideas anyone?

How many users for remote connection can I create, from support SAP

Dear all
I have a doubt with how many users can be created in my system ERP 6.0 for the remote connection, for the error product messages on the marketplace SAP,without this counts as user license.
I have not found any notes or documents from SAP to explain this.
I appreciate your help.
Best Regards,
Erika

Ok...I will reply to myself. I can use more than 10 simultaneous connection, using vnc.

How many users are there of Logic?

does anyone know where I can find out how many users there are globally of Logic Pro. I'm doing an assignment on this and I can find sales figures for DAW software anywhere....

You can or can't find sales figures?
It is also rumoured that there are many non legitimate users out there too. Please note however, I am not one of those.
Anyway, what is the assignment for? ie What's the gist, requirements and subject matter? Just interested.
Regards,
Matt

How many users does HFM support?

Hi,
how many users does HFM support(Maximum)? and why we are choose HFM compare to Hyperion enterprise?
thanks
Edited by: user10919054 on May 18, 2009 3:07 AM

There is no limit, as long as you pay for the licenses and make sure you have a robust system to support user connectivity and demand.
Hyperion Enterprise is the previous Consolidation tool most commonly used by many companies. Think of HFM as the "New Generation"....

How many users in UME

Hi,
Does anyone have any idea on how many users can be stored in the UME engine without affacting performance?
We have a current senario with about 200 portal useres, but are going to use the portal with more users in the future.
The users are stored in UME and mapped to the backendsystem (so basiclly stored to places)
I know it is better to hav a own reposotory I was just wondering what kind experinse you have with many users in the UME.
Thanks

Hi,
10,000 will not matter.
In our landscape we have 60000 user access the portal.
Only you have to keep in mind , when there is good number of user in system , you have to properly tune you system.
Your hardware sizeing should be upto in addition to that.
Can you tell me how many server nodes are there in you landscape or how many application servers are there.
Thanks,
Anil

How many users can I import at one time?

Is there a limit on how many users I can import at one time?
Also, how about other record types (Lead, Opportunity, Contacts ...etc.) Is there a limit on these also?
Where in the documentation that I can find info for this please?
I'm using CRMOD Release 18
Thanks

Account
30,000
Account Team
50,000
Appointment
30,000
Appointment Contact
50,000
Appointment User
50,000
Asset
80,000
Campaign
50,000
Contact (Admin)
30,000
Contact (Personal)
2,000
Contact Role
50,000
Contact Team
50,000
Lead
30,000
Notes
50,000
Opportunity
30,000
Opportunity Product
80,000
Opportunity Team
50,000
Portfolio
30,000
Product
80,000
Service Request
30,000
Solution
50,000
Task
30,000
Task Contact
50,000
Task User
50,000
User
500
Campaign Recipient
50,000
Custom Objects
30,000
Dealer
80,000
Vehicle
80,000

How to see how many users are working on a Dynpro application?

Hello,
Is it possible to see somwhere at the portal or on the WAS how many users are currently working with my Web Dynpro application?

Hi Roy,
I know it isn' exactly what you want but if you got to:-
System Administration->Support->Web Dynpro Test Tools->User Management
you can at least see the users currently running Web Dynpro applications (I think!)
At least its a start!
Cheers,
Gareth.

Tuxedo reboot on many users

Similar Messages

Maybe you are looking for