Tuxera driver and tftp not being pushed out

Hi all: I have three ZCM 11.2.3a servers running on OES2 SP3, one primary and two satellites. The satellites each live in a branch office connected via P2P T1's. Last week I installed the tuxera NTFS driver and have successfully set it up. I also pushed it out to one of are satellite servers (along with sync'ing tftp to that same server), but I cannot push out the driver nor sync tftp to the second satellite.
Any suggestions on how to fix this? Thanks, Chris.

Let me ask.
Anders: Thanks for the reply. After some looking around and reading,
I discovered that content replication was not running on the satellite
server not receiving the tftp updates. I kicked replication off via
command "zac cdp replicate" and that solved the problem.
BUT, I also discovered the content replication is not working properly
on that same satellite server. "zac cds" shown no schedule or throttle
rate on that "broken" satellite server while on the satellite server
that did receive the tftp files correctly shows a schedule and throttle
rate. We define the schedule and throttle at the primary server level
(default) and the satellites are set to use the default, so I am not
sure what is broken.
Chris.
>>> Anders Gustafsson<[email protected]> 1/3/2014 7:08 AM
>>>
> but I cannot push out the driver nor sync tftp to the second
satellite.
What happens when you try?
Anders Gustafsson (NKP)
The Aaland Islands (N60 E20)
Have an idea for a product enhancement? Please visit:
http://www.novell.com/rms
Anders Gustafsson (NKP)
The Aaland Islands (N60 E20)
Have an idea for a product enhancement? Please visit:
http://www.novell.com/rms

Similar Messages

All plist files are not being pushed out

Current setup : 10.6 Server ( updated to 10.6.8 )
About 10 to 15 client machines ( 10 Desktops and 5 laptops )
These client machines are being managed in a group already for Software Updates from the server and hence already have the managed preferences folder on each machine.
I have just created a new com.apple.print.custompapers.plist file and have added it to the Preference Editor for that group and have set it to 'Often'. ( WorkGroup Manager -> Computer Group -> Preferences -> Details )
But after repeated attempts, I am still not able to push out this plist file to the client machines. I have tried the following already :
1. Deleting the Managed Preferences folder from each machine. Result : It recreates the folder again, but again with only the Software update plist file.
2. I have tried setting the plist to 'Always' from the 'Once, Often, Always' selection in the Preferences Editor. Result: Same result as above.
3. I have tried adding the file manually to Managed Preferences. Result : The file is removed at the next login, and cannot be used before that.
All clients are running on 10.6.8.
If you require any more information, please specify and I'll provide it. Thank you for looking over the problem and giving it thought.
Hope to hear from someone with a possible resolution soon.
Thanks.
Prat.

Have you tried setting another, pre-made preference in the computer group settings to see if it applies?
Have you run plutil /path/to/plist in the command line to see if it is OK (can't see why this would matter, this is a stab in the dark)?
P.S.
I have found that OpenDirectory can be quirky. I have found it become corrupt but still mostly functional quite quickly after setup. Since Apple has not well documented this software and offers no directory maintenance tools, every year I end up having to rebuild the server from scratch. I know this is not very helpful, but strange, unpredictable, and unbecoming behavior seems to be more frequent than I prefer. (Thankfully setting up an OS X Server is a veritable breeze compared to Microsoft Server Products).

On my ipad3, the Skype IM is not running. All msgs i send are shown as "pending" and are not being sent out.

On my ipad3 skype IM is not running. The msgs are shown as "pending" and are not going out.
Also i could earlier send sms to mobiles from skype. Now that facility has dissapeared from teh menu.
Very thankful for any help.

You both backup your iPhones on the same Apple ID, so when she restore her iPhone it pulled the data from the last backup (your iPhone). She would need to erase her iPhone and restore from her back up. Take a look at this link in the restore section, http://support.apple.com/kb/HT4859

Group Policy not being pushed out

HI,
I have a problem with Group Policy updates. The domain controllers are Server 2008 R2 and the clients are all Windows 7 64bit. It looks like the clients are not updating their group policies. We've recently added a certificate for our new
corporate wifi. During testing we used gpupdate /force and the computers installed the certificates. It has been several weeks since the GP was published and we have announced the new wifi. Users are still being prompted to accept the certificate
even though they should have received it from the GP. If I try to do a RSOP, of a users computer, I get "The RPC Server is unavailable" Any ideas on how to fix this?
Thanks
Ron Soulliard
Ron Soulliard Systems Administrator Polaris Ventures

Group Policy is always retrieved by the clients. If a client sees a new GPO that is applicable to them, it will grab it and apply it.
In the GPMC, can you run a GPResult for a computer that hasn't gotten the GPO? You might also want to check out this list of common GP issues:
http://deployhappiness.com/top-10-ways-to-troubleshoot-group-policy/
If my answer helped you, check out my blog:
DeployHappiness. Subscribe by
RSS or
email.

Pop up states i'm being directed to a phishing site and to call "this" number, after I click on OK it just keeps popping up again and will not let me out of an endless loop

I am in an endless loop on my other iMac computer. I happened upon a page where it said "phishing site ahead" and then a pop up comes on screen telling me to call a certain number and then I click okay and of course do not call and it will not let me out of this endless loop. Shut down computer, quit Safari, but when I reopen Safari it still takes me to that same page and will not let me out or use any menu items or toolbar items. Just the same little popup box telling me to call a certain number with an OK button and I can't go anywhere or do anything on Safari. What can I do?

Also I copied this from my other computer web page:
Reported Phishing website ahead. Your network ha been monitored. Your network has been compromised due to Browser hijacking.The browser hijacking software may redirect you towards phishing websites that try to access your Login Password details. To fix this browser redirection issue we recommend you ask for instant help. Help Line 1 877 899 1824.
Then another smaller popup window pops up
http://www.pcassists.info
Security Error
Call Helpline 1877 899 1824
So this is what I was talking about, and the small popup window plus the larger Window stating "Reported Phishing website ahead" will not go away and I cannot use Safari anymore even after I shut down my computer, disconnected it, and then signed on again and reopened Safari, it still takes me to that page and I cannot get out of it.
PLEASE HELP!!!!!!!!

HT4061 my iPhone unexpectedly shut down and now is not turning back on, charging and is not being detected by my laptop, help

my iPhone unexpectedly shut down and now is not turning back on, charging and is not being detected by my laptop, help

i put that i held down the home button and all that... sorry, should of made my message a little clearer hun.. but i did try that, ive been searching video's on the net trying to figure out how to fix the problem, but nothing seems to be working... ive just tried pluging the usb lead into my phone while holding the home button then connecting it to my computer to see if itunes fires up, but even that didnt work... i dont know what else to try.

Where clause one query not being pushed down

I am having a problem where I cannot get a certain "optional" parameter to be pushed down to a query. The parameter gets applied in memory after the result set is returned but not pushed down to the DB. The function is as follows:
declare function getFoo($key as xs:string, $optinalInput as xs:string*) as element(b:bar)*
for $foo in f:getFoo()
where $key = $foo/key
where not(exists($optinalInput)) or $foo/optional = $optinalInput<- does not get pushed down to the query
return $foo
If I make optinalInput an xs:string instead of xs:string * and the optional parameter will get pushed to the query. The problem is for this optional parameter I could get anywhere from 0-50 in the sequence. Seems like when the parameter is a sequence it doesn't get applied to the query. Is there any way around this?

Mike,
I understand the difference between * and ? and I was one of the people working on the "string-length not getting pushed" problem so I am very familiar with it. I tried you solution that you mentioned below and it still did not push the where clause to the query. I know I could achieve this with an ad-hoc query but I wanted to do a pure xquery implementation of this component because of the benefits it could have when interacting with other components in our ODSI project...such as SQL joining and potentially pushing additional where clause down from components that call this component. The only way I did get this to kind of work is to do this:
return
for $o in $optinalInput
for $foo in f:getFoo()
where $key = $foo/key
where $o = $foo/optional
return
$foo
for $count in 1
where not(exists($optinalInput))
for $foo in f:getFoo()
where $key = $foo/key
return
$foo
By putting the optional parameter into a FOR statement above the table call it guarantees that at least one will exists and that's why the optional parameter gets pushed properly to the DB with a parameterized query. The problem with this is that even though a parameterized query gets pushed it will call the SQL statement multiple times!...not good.
Another solution that was suggested to me would be to create the number of sequences for each item in the sequence and treat each item as it's own. For example if you know that the schema limits the sequence from 0..50 then you could make 50 items and 50 where clauses....probably not an optimal solution either but it would achieve properly pushing the where clause tot he DB.
For now I am satisfied with this optional parameter not being pushed to the DB because the performance was still good but it would be nice if there was a maintainable pure xquery solution to this problem.
Thanks for the help it's always appreciated!
Mike

21"imac 45 days old - 2tb drive has started not being recognized; receiving a "drive not disconnected properly", though the drive was never disconnected

21"imac 45 days old - 2tb drive has started not being recognized; receiving a "drive not disconnected properly", though the drive was never disconnected

That sounds like a hardware problem.
Backup your data and contact Apple Support or your local AASP to make a service appointment.
Apple - Support - Contact Apple Support
Apple - Find Locations

E-mail not being pushed

I see this topic has been addressed with other phones, but since converting to the cloud my e-mail is either not being pushed or is severly delayed. I am using mobile me, with iphone 4 and i cloud. Was having no issues prior to using "the cloud". Any ideas ? thanks in advance

Push mail does'nt work since 2012/05/24 7.00 PM HAEC in France for me. I've 3 accounts and I'm an original MobileMe user.
I tried all the solutions on this bord. Nothing happen.
I called Apple support, for us iCloud is functional.
Push mail on iCloud is only functional if you're a new member not an older MobileMe.
You can test this by creating a new iCloud account, push mail is functional.
The problem comes from Apple.
Apple must solve this problem quickly.

Emails not being pushed to Mac Book Pro

Emails are not being pushed to my Macbook Pro despite coming to my other i devices. If I close and reopen mail it seems to encourage some but not all to arrive. Any suggestions for a fix please?
Thanks
Duncan

Hi duncal,
If you are having issues receiving emails in Mail on your MacBook Pro, you may find the troubleshooting steps outlined in the following article helpful:
OS X Mail: Troubleshooting sending and receiving email messages - Apple Support
Regards,
- Brenden

My ipod touch 4g is not charging using a wall charger and is not being recognize whatsoever by my laptop (windows) any help?, My ipod touch 4g is not charging using a wall charger and is not being recognize whatsoever by my laptop (windows) any help?

My ipod touch 4g is not charging using a wall charger and is not being recognize whatsoever by my laptop (windows) any help?, My ipod touch 4g is not charging using a wall charger and is not being recognize whatsoever by my laptop (windows) any help?

Hvae you tried here:
iOS: Device not recognized in iTunes for Windows
iPod touch: Hardware troubleshooting
Have you tried another cable?
Look at the dock connector. Look for abnormalities like bent or corroded contacts, foreign material and cracked or broken plastic

After updating ios my ipad is stuck in recovery mode and is not being recognised by the computer in windows or itunes. Help!

Help - I am stuck in Afghanistan on operations and my iPad mini has died.
I tried to update the IOS as directed, there were a few error messages and I cancelled the process.
The ipad now only shows the connect to itunes screen and is not being recognised by the computer in either windows or itunes.
I have tried several resets and restarted the computer and reinstalled itunes.
Is there anything else I can do.
This is my only method of talking back to my family at the moment and is really quite important.
JS

Thanks, I will give it a go. Will it work on my computer after I do that?
Jez

My ipod nano 5th gen. wont turn on and is not being recognized on my mac or itunes

my ipod nano 5th gen. wont turn on and is not being recognized on my mac or itunes

What have you tried so far in terms of troubleshooting? After leaving the Nano to sit and charge for at least 30 minutes, try resetting it by pressing and holding both the Select/Center and Menu buttons together long enough for the Apple logo to appear. You'll want to make sure the Hold Switch is not in the On position as well.
B-rock

I am unable to burn any info-photo ect on to a disk. I have a 27" I mac mid 2010 version. I put in a disk, hit burn, it runs for about 3 mins and ejects the disk sayiny there was an error with the drive and will not restart.

am unable to burn any info-photo ect on to a disk. I have a 27" I mac mid 2010 version. I put in a disk, hit burn, it runs for about 3 mins and ejects the disk sayiny there was an error with the drive and will not restart.

The optical drive has probably failed. It's a fairly common thing with these slim SuperDrives. Does it read any discs you put into it? You can try resetting the SMC and pram but I'll be surprised if it helps.
To reset the SMC
Shut down the computer.
Unplug the computer's power cord.
Wait fifteen seconds.
Attach the computer's power cord.
Wait five seconds, then press the power button to turn on
Resetting PRAM and NVRAM
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.

My iphone 5 is disabled and is not being read by itunes, itunes is giving me a prompt of my passcode, but that screen is not showing, please help me able my iphone.

my iphone 5 is disabled and is not being read by itunes, itunes is giving me a prompt of my passcode, but that screen is not showing, please help me able my iphone.

+Do a DFU recovery:+
+1. Open iTunes.+
+2. Connect the iPhone+
+3 Press both the home and sleep/wake buttons until the Apple icon appears (ignore the red slider if it shows).+
+4. Continue pressing the home button alone until iTunes sees your phone in recovery mode.+
+5. Follow the prompts to restore the iPhone.+
If not, take it down to mobile dealers that can reset your phone for you. All data will be lost.

Tuxera driver and tftp not being pushed out

Similar Messages

Maybe you are looking for