Tuxonice hibernate fails stopping network

I just started using the kernel26tp for aur on my T60 thinkpad and am trying to get tuxonice to work for hibernation. The problem seems to be with stopping the network. I use netcfg2 from testing to connect.
hibernate.log
Resumed at Sat Mar 1 00:53:47 PST 2008
Starting suspend at Sat Mar 1 15:52:52 PST 2008
hibernate: [01] Executing CheckLastResume ...
hibernate: [01] Executing CheckRunlevel ...
hibernate: [01] Executing LockFileGet ...
hibernate: [01] Executing NewKernelFileCheck ...
hibernate: [05] Executing XStatusSuspendBegin ...
hibernate: [10] Executing EnsureSwsusp2Capable ...
hibernate: [11] Executing XHacksSuspendHook1 ...
hibernate: [20] Executing XStatusProgress ...
hibernate: [30] Executing ServicesStop ...
hibernate: [30] Executing XStatusProgress ...
hibernate: [40] Executing XStatusProgress ...
hibernate: [50] Executing XStatusProgress ...
hibernate: [59] Executing RemountXFSBootRO ...
hibernate: [60] Executing NetworkStop ...
Bringing down interface wmaster0
Bringing down interface wlan0
Bringing down interface irda0
hibernate: Aborting suspend due to errors in NetworkStop (use --force to override).
hibernate: [60] Executing XStatusProgress ...
hibernate: [60] Executing NetworkStart ...
Bringing up interface irda0 (from auto)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:20 errors:0 dropped:0 overruns:0 frame:0
TX packets:20 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:1000 (1000.0 b) TX bytes:1000 (1000.0 b)
wlan0 Link encap:Ethernet HWaddr 00:1B:77:08:AB:A2
inet addr:192.168.0.4 Bcast:192.168.0.255 Mask:255.255.255.0
inet6 addr: fe80::21b:77ff:fe08:aba2/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:420 errors:0 dropped:0 overruns:0 frame:0
TX packets:433 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:311720 (304.4 Kb) TX bytes:89616 (87.5 Kb)
wmaster0 Link encap:UNSPEC HWaddr 00-1B-77-08-AB-A2-00-00-00-00-00-00-00-00-00-00
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Bringing up interface wlan0 (from auto)
Bringing up interface wmaster0 (from auto)
hibernate: [59] Executing RemountXFSBootRW ...
hibernate: [50] Executing XStatusProgress ...
hibernate: [40] Executing XStatusProgress ...
hibernate: [30] Executing XStatusProgress ...
hibernate: [30] Executing ServicesStart ...
hibernate: [20] Executing XStatusProgress ...
hibernate: [15] Executing XStatusProgress ...
hibernate: [11] Executing XHacksResumeHook1 ...
hibernate: [05] Executing XStatusProgressKill ...
hibernate: [01] Executing XStatusReportErrors ...
hibernate: [01] Executing NoteLastResume ...
hibernate: [01] Executing LockFilePut ...
hibernate: [00] Executing RemoveSwsuspProcCruft ...
Resumed at Sat Mar 1 15:52:55 PST 2008
The lines in common.conf are:
### network
DownInterfaces auto
UpInterfaces auto
I also tried specifying each of my network devices and had the same result.
Any suggestions on where to go from here to get this working?

Hi
Maybe you should disable the Wake up on LAN in BIOS.
Check it!

Similar Messages

SatelliteA300: standby or hibernate fails with network cable connected

I am unable to get my laptop to stay in standby or hibernate for more than a minute, unless I remove the router cable.
All programs have been stopped first, no other viruses have been detected or other unexpected behaviour.
Can anyone advise please?
Thanks
M

Hi
Maybe you should disable the Wake up on LAN in BIOS.
Check it!

HOW TO RESOLVE(Test failed: The Network Adapter could not establish the connection)

Hii
I want to create new databse as sysdba in jdev.I followed the steps as given in
Oracle JDeveloper 11g Release 2 Tutorials - Designing and Building Database Tables
In step 7 create database user and database connection, I am not able to do that and getting the error
(Test failed: The Network Adapter could not establish the connection).
Please help me.

Hi,
Could you please provide all value you pass to the connection properties on the connection creation panel? First of all, you should choose "Generic JDBC" as the connection type in order to use BDB SQL JDBC driver.
Regards,
Cindy

Upload has failed. Network failure

Hello.
Since i work with indesign cc, i have a trouble wit folio builder panel: Everytime the upload fails at first attempt, it appears this message:"Upload has failed. Network failure." Ever works when i retried, but not at first attempts. This is unworkable with large publications, with a lot of articles. I´ve wrote that this is a trouble with the acrobat.com service outage, i need a solution.
Thanks. Best regards.

Was successfully re-linking indesign files to my dps producer dashboard. Files had been converted to CC (from CS6)-- and was switching from v26 to v 28. Everything was working just FINE, until about 6pm yesterday-- I had re-linked almost 3/4ths of my files, then I began getting the NETWORK FAILURE notice.
This morning, I tried creating a new folio-- managed to upload ONE new file into the new folio, then got the same 'network failure' message on the next one I tried to upload.
These files are from a successful app-- already in the app store, but it sure doesn't work right now! IOS 7 ... #!#*?
It is not about where your files are-- or how much memory -- Something else is going on.
I know you guys will figure it out...and will be standing by, anxious to fix my app!
THANKS.
nancy p

Issues Updating Articles - The upload has failed. Network failure.

Not sure if the server is being unresponsive or if it is something my end but for the last couple of hours I've had problems updating my articles - it's very intermittent, sometimes working but more often than not I'm getting the error -
The upload has failed.
Network failure.
Very frustrating...

Was successfully re-linking indesign files to my dps producer dashboard. Files had been converted to CC (from CS6)-- and was switching from v26 to v 28. Everything was working just FINE, until about 6pm yesterday-- I had re-linked almost 3/4ths of my files, then I began getting the NETWORK FAILURE notice.
This morning, I tried creating a new folio-- managed to upload ONE new file into the new folio, then got the same 'network failure' message on the next one I tried to upload.
These files are from a successful app-- already in the app store, but it sure doesn't work right now! IOS 7 ... #!#*?
It is not about where your files are-- or how much memory -- Something else is going on.
I know you guys will figure it out...and will be standing by, anxious to fix my app!
THANKS.
nancy p

IMovie temporary files; importing fails on network home directory

Hi all,
I work in a laboratory and manage a bunch of Macs. We have a 2x2.5GHZ G5 with 4G of memory and iMovie 6. The mac has two 300 GB disks that are in a concatenated raid group, so the system has about 450GB of free disk.
The mac is bound to an Open Directory server and users have network home directories. (The network file system happens to be AFS, which is probably unusual)
The problem I am having is that whenever I am importing a clip from any external source (in this case I have tried a Sony GL-2 and an external DV deck), after about 13 minutes of importing, imovie stops importing, and iMovie displays the blue screen that you get when a video source is connected but not playing... but, the camera is clearly still playing, if I look in the viewfinder. this failure mode is completely reproducible, and always fails at the exact same place. (but works fine on another mac, see below)
I have tried saving the iMovie project onto both local disk and into the networked home directory, with the same results in either case.
I've tried the same setup on an identical mac that is not using networked home directories (local only), which works fine. I suspect that the problem has to do with the way the network file system caches/buffers, but I have no idea where iMovie keeps its housekeeping/temporary files. I was under the impression that it is all kept in the project directory, wherever you happen to create it. Are there some files that get written to the home directory no matter where you save the project?
mjp
2x 2.5 GHz G5 PowerMac 4GB RAM Mac OS X (10.4.6)

iMovie doesn't have temporary files. All files are kept in the project folder (or "package").
iMovie: How to Save Projects to Another Hard Disk
http://docs.info.apple.com/article.html?artnum=93296
See "Important Considerations" at the bottom.

Leopard : Restore failed during network install

Hi,
I have created universal NBI using SIU on Leopard OSX server(10.5.1) of Leopard OS (10.5, 10.5.1) DMG.
While doing network installation, it reboots the machine and start installation but sometimes I get restore failed error and it stops installation. This happens 90% when I do net-installation from Leopard. And happens 10% when I do net-installation from Tiger.
I don't understand what could be the reason between Leopard and Tiger here because if there something wrong with NBI, net-install should fail for both the cases. (I assume, since I don't know that much about OS internals)
By seeing installer log, I can see "startup disk" application is crashing and it's parent process is Installer.
I will appreciate for any solution or any information if it is Leopard OS bug.
Thanks,
Rohit

Hello
I am trying to reimage one of my disk from other disk and using the following command.
echo "Password" | sudo -S asr -source /Volumes/Data/Images/TW_EN.dmg -target '/Volumes/OS X 10.5' -erase
But it is failing to restore OS without throwing any errors. I have two tiger and two leopard. There is no issue with same command on Tiger but Leopard is failing. Is there some issue with asr on Leopard.
Thanks,
Tagr

Time Machine and Time Capsule - Failing with Network Problem

My problems with TM/TC have been ongoing for a couple of months now and I am going round in circles - need help.
This is the second post I have made, the first got lost in people suggesting the obvious - so I will try to be a little more specific if I can.
I will detail the current state first - i.e. where I am now - after I will list what I have done so far to get to this point.
Currently, my iMac (intel) is directly connected by Ethernet 1GB to the Time Capsule. The TC is then connected to a Netgear router which in turn is connected to Internet.
I have no network problems at all - internet connection is fine. the Netgear Router has the latest firmware version and is working fine. The porblems i have are nothing to do with this.
The time Capsule is in Bridge mode and getting a reserved dhcp IP address from the Netgear router.
The Time Capsule has been fully reset - i.e. power cable out, hold the reset button, plug in power cable (spark, spark), hold reset button, fast blink for 20 seconds or so, light goes out, release button.
I have re-applied the latest Time Capsule firmware.
I have renamed the disk on the Time Capsule.
I have renamed my iMac and deleted all the time capsule entries from Keychain.
I have re-installed Mac OSX and re-updated to the latest 10.5.6 release.
At the moment I have kicked off a backup with a lot of large files - like music folder, video folder etc excluded. I also have parallels and have excluded the disk image. I have 1 other 50GB disk image which is also excluded.
I am expecting the first initial backup will complete successfully.
I will then remove music and video from exclusions and allow them to backup. I am expecting this will complete no problem. (I do this because the upcoming problem will happen if I move away from the machine - and I dont want to sit there for 2 days).
So up to this point TM and TC have performed flawlessly. The issue that follows started happening before the 10.5.6 update after backing up with no issues for months. At this point I will be able to use TM to browse the backup and restore files. I will be able to mount the sparse bundle and browse files. Spotlight reports no issues and indexes quickly.
If I leave my machine after a successful backup and the hourly update kicks in it will fail with 'A Network problem' basically saying the backup has filed because of a network problem, but is not any more specific, logs show far too much to put the whole thing here, but the following is an excerpt
Dec 23 05:19:49 MickMac /System/Library/CoreServices/backupd[1499]: Backup destination mounted at path: /Volumes/Backup
Dec 23 05:19:50 MickMac hdiejectd[1519]: running
Dec 23 05:19:51 MickMac kernel[0]: jnl: disk1s2: replay_journal: from: 28864512 to: 30084096 (joffset 0x1d0f000)
Dec 23 05:21:49 MickMac kernel[0]: jnl: disk1s2: journal replay done.
Dec 23 05:21:49 MickMac /System/Library/CoreServices/backupd[1499]: Disk image /Volumes/Backup/MickMac_001ec215ce76.sparsebundle mounted at: /Volumes/Backup of MickMac
Dec 23 05:21:49 MickMac /System/Library/CoreServices/backupd[1499]: Backing up to: /Volumes/Backup of MickMac/Backups.backupdb
Dec 23 05:21:49 MickMac com.apple.launchd[1] (com.apple.netauth.sysagent[1500]): Stray process with PGID equal to this dead job: PID 1503 PPID 1 check_afp
Dec 23 05:21:55 MickMac fseventsd[38]: event logs in /Volumes/Backup of MickMac/.fseventsd out of sync with volume. destroying old logs. (3627 125 5482)
Dec 23 05:27:33 MickMac /usr/sbin/ocspd[1539]: starting
Dec 23 05:30:27 MickMac kernel[0]: ASP_TCP HoldPendingReqs: holding slot 5 reqID 5400 flags 0x9 afpCmd 34 so 0x7e78cc0
Dec 23 05:30:27 MickMac kernel[0]: ASP_TCP Disconnect: triggering reconnect by bumping reconnTrigger from curr value 0 on so 0x7e78cc0
Dec 23 05:30:27 MickMac kernel[0]: AFP_VFS afpfs_DoReconnect started /Volumes/Backup prevTrigger 0 currTrigger 1
Dec 23 05:30:27 MickMac kernel[0]: AFP_VFS afpfs_DoReconnect: doing reconnect on /Volumes/Backup
Dec 23 05:30:27 MickMac kernel[0]: AFP_VFS afpfs_DoReconnect: soft mounted and hidden volume so do not notify KEA for /Volumes/Backup
Dec 23 05:30:27 MickMac kernel[0]: AFP_VFS afpfs_DoReconnect: Max reconnect time: 30 secs, Connect timeout: 15 secs for /Volumes/Backup
Dec 23 05:30:27 MickMac kernel[0]: AFP_VFS afpfs_DoReconnect: connect to the server /Volumes/Backup
Dec 23 05:31:26 MickMac kernel[0]: ASP_TCP CancelOneRequest: cancelling slot -1 error 89 reqID 1 flags 0x9 afpCmd 0 so 0x7e78cc0
Dec 23 05:31:26 MickMac KernelEventAgent[34]: tid 00000000 received VQ_DEAD event (32)
Dec 23 05:31:26 MickMac KernelEventAgent[34]: tid 00000000 type 'afpfs', mounted on '/Volumes/Backup', from 'afp_0V1fqC1mgalO00mE1H0Pyetl-1.2d00000a', dead
Dec 23 05:31:26 MickMac kernel[0]: AFP_VFS afpfs_DoReconnect: Open Session failed 57 /Volumes/Backup
Dec 23 05:31:26 MickMac kernel[0]: AFP_VFS afpfs_DoReconnect: max reconnect time reached 60 > 30 /Volumes/Backup
Dec 23 05:31:26 MickMac kernel[0]: AFP_VFS afpfs_DoReconnect: posting to KEAType IO] [ErrNo 5] [IOType Read] [PBlkNum 1248] [LBlkNum 155] [FSLogMsgID 501572642] [FSLogMsgOrder First]
Dec 23 05:31:26 MickMac kernel[0]:
Dec 23 05:31:26 MickMac fseventsd[38]: failed to unlink old log file /Volumes/Backup of MickMac/.fseventsd/0000000000ccb02b (Input/output error)
Dec 23 05:31:26 MickMac kernel[0]: disk1s2: 0x14 (UNDEFINED)."
It goes on and on and is repeated every hour. For each one I get an error message on screen saying backup failed due to a network error. However I have tried a manual download over the same period set at an extremely slow rate so that it was downloading during this time and it showed no errors. I.e. the network connection from imac, through TC to netgear and out to internet - and monitored this while time machine showed these errors (i.e. at the same time) and this showed no connection problems at all and completed succesfully.
I know TM uses an internal address to do backups, but uses the same cable and network card to get the job done. I am simply removing the cable as a source of issue although I have also replaced this making no difference.
Applecare are involved and have so far been sent 2 sets of logs and so far have not been able to find the cause. New TC is on its way to try that, although they think it is something on the imac that is causing this.
Sleep mode is turned off although screen sleep is on. The tick is not in the box for putting hard drives to sleep whenever possible.
Now, after this has happened, and back at the machine. I restart both imac and TC. Try running a backup, spotlight starts to re-index - i.e. will mount the backup volume and start the index process, gets to about 90% then fails - again excerpts from log
"Dec 23 09:18:50 MickMac /System/Library/CoreServices/backupd[161]: Backing up to: /Volumes/Backup of MickMac/Backups.backupdb
Dec 23 09:18:50 MickMac mds[32]: (/Volumes/Backup of MickMac/.Spotlight-V100/Store-V1/Stores/266E0E5F-E002-4EB5-A049-9B50582510FE)(E rror) IndexCI in ContentIndexOpenBulk:Unclean shutdown of /Volumes/Backup of MickMac/.Spotlight-V100/Store-V1/Stores/266E0E5F-E002-4EB5-A049-9B50582510FE/li ve.0.; needs recovery
Dec 23 09:18:57 MickMac com.apple.launchd[67] (com.apple.netauth.useragent[147]): Stray process with PGID equal to this dead job: PID 152 PPID 1 check_afp
Dec 23 09:19:48 MickMac mds[32]: (Error) Server: machmsgdispatch: (ipc/send) invalid destination port [msgh_id 14016]
Dec 23 09:29:35 MickMac /usr/sbin/ocspd[197]: starting
Dec 23 09:42:48 MickMac kernel[0]: ASP_TCP HoldPendingReqs: holding slot 11 reqID 3204 flags 0x9 afpCmd 60 so 0x8051b28
Dec 23 09:42:48 MickMac kernel[0]: ASP_TCP HoldPendingReqs: holding slot 12 reqID 3205 flags 0x9 afpCmd 34 so 0x8051b28
Dec 23 09:42:48 MickMac kernel[0]: ASP_TCP Disconnect: triggering reconnect by bumping reconnTrigger from curr value 0 on so 0x8051b28
Dec 23 09:42:49 MickMac kernel[0]: AFP_VFS afpfs_DoReconnect started /Volumes/Backup prevTrigger 0 currTrigger 1
Dec 23 09:42:49 MickMac kernel[0]: AFP_VFS afpfs_DoReconnect: doing reconnect on /Volumes/Backup
Dec 23 09:42:49 MickMac kernel[0]: AFP_VFS afpfs_DoReconnect: soft mounted and hidden volume so do not notify KEA for /Volumes/Backup
Dec 23 09:42:49 MickMac kernel[0]: AFP_VFS afpfs_DoReconnect: Max reconnect time: 30 secs, Connect timeout: 15 secs for /Volumes/Backup
Dec 23 09:42:49 MickMac kernel[0]: AFP_VFS afpfs_DoReconnect: connect to the server /Volumes/Backup
Dec 23 09:42:49 MickMac kernel[0]: AFP_VFS afpfs_DoReconnect: Logging in with uam 10 /Volumes/Backup
Dec 23 09:42:49 MickMac kernel[0]: AFP_VFS afpfs_DoReconnect: Restoring session /Volumes/Backup
Dec 23 09:42:49 MickMac kernel[0]: ASP_TCP CancelOneRequest: cancelling slot 11 error 35 reqID 3204 flags 0x19 afpCmd 60 so 0x8051b28
Dec 23 09:42:49 MickMac kernel[0]: ASP_TCP CancelOneRequest: cancelling slot 12 error 35 reqID 3205 flags 0x19 afpCmd 34 so 0x8051b28"
And later....
Dec 23 09:45:49 MickMac kernel[0]: disk1s2: 0x39 (UNDEFINED).
Dec 23 09:45:49 MickMac KernelEventAgent[34]: tid 00000000 received VQ_DEAD event (32)
Dec 23 09:45:49 MickMac kernel[0]:
Dec 23 09:45:49: --- last message repeated 1 time ---
Dec 23 09:45:49 MickMac kernel[0]: hfs_clonefile: cluster_read failed - 5
Dec 23 09:45:49 MickMac KernelEventAgent[34]: tid 00000000 type 'afpfs', mounted on '/Volumes/Backup', from 'afp_0V1fqC1mgalO00mE1H0Pyetl-1.2d000005', dead
Dec 23 09:45:49 MickMac kernel[0]: HFS resolvelink: can't find iNode791959
Dec 23 09:45:49 MickMac kernel[0]: disk1s2: 0x39 (UNDEFINED).
Dec 23 09:45:49 MickMac kernel[0]: ore-V1/Stores/6CC2B046-5E28-4179-96B7-9DFF9F7EE431/store.db] [FSLogMsgID 1580919258] [FSLogMsgOrder Last]
Dec 23 09:45:49 MickMac KernelEventAgent[34]: tid 00000000 found 1 filesystem(s) with problem(s)
Dec 23 09:45:49 MickMac kernel[0]: jnl: disk1s2: dojnlio: strategy err 0x5
Dec 23 09:45:49 MickMac kernel[0]: jnl: disk1s2: end_transaction: only wrote 0 of 49664 bytes to the journal!
Dec 23 09:45:49 MickMac kernel[0]: disk1s2: 0x14 (UNDEFINED).
Dec 23 09:45:49 MickMac kernel[0]:
Dec 23 09:45:49: --- last message repeated 1 time ---
Dec 23 09:45:49 MickMac mds[32]: (/Volumes/Backup of MickMac/.Spotlight-V100/Store-V1/Stores/6CC2B046-5E28-4179-96B7-9DFF9F7EE431)(E rror) IndexSDB in dbcheckdatastore:store.db : dbgetdatastore: ERR: could not read 4096 bytes
Dec 23 09:45:49 MickMac kernel[0]: disk1s2: 0x14 (UNDEFINED).
Dec 23 09:45:49 MickMac mds[32]: (/Volumes/Backup of MickMac/.Spotlight-V100/Store-V1/Stores/6CC2B046-5E28-4179-96B7-9DFF9F7EE431)(E rror) IndexCI in CIMetaInfoSync:write err: 5
Dec 23 09:45:49 MickMac kernel[0]:
Dec 23 09:45:49 MickMac mds[32]: (/Volumes/Backup of MickMac/.Spotlight-V100/Store-V1/Stores/6CC2B046-5E28-4179-96B7-9DFF9F7EE431)(E rror) IndexCI in CIMetaInfoCreate:Tried to create index when index already existed /Volumes/Backup of MickMac/.Spotlight-V100/Store-V1/Stores/6CC2B046-5E28-4179-96B7-9DFF9F7EE431
Dec 23 09:45:49 MickMac kernel[0]:
Dec 23 09:45:49 MickMac mds[32]: (/Volumes/Backup of MickMac/.Spotlight-V100/Store-V1/Stores/266E0E5F-E002-4EB5-A049-9B50582510FE)(E rror) IndexSDB in adddirtychunk:/Volumes/Backup of MickMac/.Spotlight-V100/Store-V1/Stores/266E0E5F-E002-4EB5-A049-9B50582510FE/st ore.db : ERR: Can't write DST header (Input/output error)
Dec 23 09:45:49 MickMac kernel[0]: disk1s2: 0x14 (UNDEFINED).
Dec 23 09:45:49 MickMac kernel[0]:
Dec 23 09:45:49: --- last message repeated 1 time ---
Dec 23 09:45:49 MickMac kernel[0]: disk1s2: 0x14 (UNDEFINED).
Dec 23 09:45:49 MickMac kernel[0]:
Dec 23 09:45:49: --- last message repeated 1 time ---
Dec 23 09:45:49 MickMac kernel[0]: disk1s2: 0x14 (UNDEFINED).
Dec 23 09:45:49 MickMac kernel[0]:
Dec 23 09:45:49: --- last message repeated 1 time ---
Dec 23 09:45:49 MickMac mds[32]: (/Volumes/Backup of MickMac/.Spotlight-V100/Store-V1/Stores/266E0E5F-E002-4EB5-A049-9B50582510FE)(E rror) IndexSDB in dbflushdatastore:/Volumes/Backup of MickMac/.Spotlight-V100/Store-V1/Stores/266E0E5F-E002-4EB5-A049-9B50582510FE/st ore.db : dbsyncdatastore: write-errors flushing cache/writing map.
Am I the only one having these problems? any help from anybody please...

Got the same problem with a 3 months old TC.
The replacement TC, does it work now flawless?

Rescue and Recovery failed destination network location can no longer be reached

W510, running Windows 7 Pro SP1, updated with ThinkVantage including BIOS 1.37 along with Rescue and Recovery 4.31 yesterday. Using Backup locations "Local hard drive" had not problem, but when it was set to "Network", it gave me "The backup failed because the destination network location can no longer be reached.". Prior to running RR, I manually mounted the shared drive on W510 and could read and write files. The user that mounted the shared drive was not "Administrator" but has Administrator privilege. The network shared drive was a folder on an Windows XP SP3 computer.The shared drive had Full Control granted to Everyone as well as for Sharing. I rebooted W510 before starting RR. After the "network location can no longer be reached" error popped up, a long while later, RR actually wrote some files in the shared drive and then finally it aborted. It created on the shared drive RRBackups\SZ\<UUID>\... (among other folders and files); under <UUID> there's a common\rr.log with:
Sun May 22 01:56:39 2011 RescueRecovery: Running: C:\Program Files (x86)\Lenovo\
Rescue and Recovery\br_funcs.exe backup level=0 destination="\\192.168.0.1\W510_
backup\RRbackups\SZ\D0D186C05DAE11E0-9303F5C431248DAC" drive=C: location=16 nice
=0 pw=0 uuid=0 compress encrypt
Sun May 22 02:04:15 2011 RescueRecovery: br_funcs returned error code 0x501
Sun May 22 02:04:15 2011 RescueRecovery: Running: C:\Program Files (x86)\Common
Files\Lenovo\mnd\mapdrv.exe *
Sun May 22 02:04:15 2011 RescueRecovery: Get the shutdown flag from service is 0
Sun May 22 02:04:48 2011 RescueRecovery: CRRBackup::removeLevel() - DeleteFile(\
\192.168.0.1\W510_backup\RRbackups\SZ\D0D186C05DAE11E0-9303F5C431248DAC\common\b
t0.dat) failed. Error 3
Sun May 22 02:04:48 2011 RescueRecovery: In GetBackupFolderName, UUID is D0D186C
05DAE11E0-9303F5C431248DAC!
Sun May 22 02:04:48 2011 RescueRecovery: In CreateSpecialBackupFolder, get szBackupFolder is C:\RRbackups\SZ\D0D186C05DAE11E0-9303F5C431248DAC
Sun May 22 02:04:48 2011 RescueRecovery: CreateSpecialBackupFolder: szBackupFolder= C:\RRbackups, szMidiumFolder = C:\RRbackups\SZ
The events don't make sense:
a) Why would RR says "network location can no longer be reached" - the wording suggests that it was OK, but now it isn't.
b) The br_funcs returns Error 0x501 (NOT_IMPLEMENTED or NOT_SUPPORTED), but RR still attempted to call mapdrv.
c) Apparently mapdrv was successful otherwise it shouldn't try to delete the t0.dat on the shared drive (which didn't exist - hence Error 3 (PATH_NOT_FOUND)) and unless it has reached the remote computer, it wouldn't know the file wasn't there.
I'm curious to find out if anyone has run into this problem and how to fix it.

It errored out after it has already created some folders and files as indicated in the first post.Tried the same steps several times just make sure it was repeatable by closing Rescue and Restore app and starting it again. The network between the share host and my W510 was a direct RJ45 cable connection, so zero hop. In the end I used Windows 7 Backup and Restore to do full backup, using the same \\server\sharename, the network share was mapped without a problem. But then Windows 7 Restore CD wasn't able to map network share - giving me 0x800704cf. Googling shows lots questions raised on this but no fix.
Update:
Last night, I gave it a shot again. For some reason, RR was able to mapped the network share using \\IPaddress\sharename (this time I used a different folder and a diferent sharename). OK great, but after 10 hrs it's at 88% completion, did my math, estimated elasped time is 12 hrs, Wow! The image backup with Windows 7 Backup took 5 hr 51 min with 132GB in the WindowsImageBackup folder. RR is 2x slower!
On the other hand, as it's still running, the est. backup folder size is 106GB. RR does a better job in compression - a 20% reduction in size compared with Windows' at the cost of 2x time.
Going back to the Windows 7 Restore CD 0x80704cf error when mapping the network share, found an Internet user posting that he succeede by providing a NIC driver.

Office 365 Pro Plus - Setup Failed Error - Network Deployment Share Method

Hello,
We recently deployed Office 365 Pro Plus utilizing the network share method. The issue we are experiencing is occuring after uninstalling Office 365. When we try to reinstall 365 on the same PC, the setup states "Setup Failed - A newer version
of Setup is required to install this product"
Here is our currentl XML script:
<Configuration>
<Add SourcePath=\\WDS.contoso.com\O365Deployment OfficeClientEdition="32" >
    <Product ID="O365ProPlusRetail">
      <Language ID="en-us" />
    </Product>
   </Add>
<Updates Enabled="TRUE" UpdatePath=\\WDS.contoso.com\O365Deployment />
<Display Level="FULL" AcceptEULA="TRUE" />


</Configuration>
Any help would be greatly appreciated!

Hi,
Would you like to give me the whole error message? Please see the "Troubleshoot specific errors in Office 365 ProPlus",we can find the resolution of
Internet Connection Required.
Since you want to install or deploy the Office 365 pro plus, please read the following articles and check they are helpful.
http://technet.microsoft.com/en-us/library/gg715562(v=office.15).aspx
http://blogs.technet.com/b/office_resource_kit/archive/2013/08/08/how-to-deploy-office-365-proplus-from-an-on-premises-web-portal.aspx
http://www.microsoftvirtualacademy.com/training-courses/office-365-deployment-for-it-pros
http://community.office365.com/en-us/w/upgrade/installing-office-365-proplus-with-the-office-deployment-tool.aspx
Regards,
George Zhao
TechNet Community Support

Stop network unmounting when computers in sleep.

I have recently networked an eMac and iBook thru Airport Extreme. Both computers can see each-other when awake but when one is asleep or shut down the connection fails and I have to disconnect all.
Is there a way I can still have them linked and usable even if they are asleep or off?
Many thanks, any help would be great.

Had the same problem. When to energy saver in system preferences turned off sleep for the computer (left sleep on for the display) and unchecked the 'put the hard disk(s) to sleep whenever possible' box. That solved the problem for me, the connection between the two computers stayed on even when one was sleep. Hope that helps.

Ipad update failed, says network connection failed or timed out, but have good coverage, tried several times

Been trying to update my ipad, and it keeps failing. the screen message I get says network failed ot timed out. Have no problem with internet coverage. Have tried on several occasions now.

Tap Settings > General > Reset > Reset Network Settings
Then restart the device.
Hold the On/Off Sleep/Wake button down until the red slider appears. Slide your finger across the slider to turn off iPhone. To turn iPhone back on, press and hold the On/Off Sleep/Wake button until the Apple logo appears.

How to start and stop Network on MAC OS 10.4

Hi,
for starting my oracle database I need to disconnect my PowerBook from the network to start up in order to allow the Enterprise Manager to come up with changing DHCP address (Loopback). I am looking for a command similar to '/etc/init.d/network start stop restart' on Linux.
Does any body know?
Kind regards........Lorenz

service generally manages the lower level services on the system.
High level services such as Apache are managed via serveradmin:
serveradmin status web
serveradmin start web

How to start/stop network sharing??

I would like to know how to start my mac as a server, and how to stop it from being seen by someone else in the network. I recently used a colleague's machine, and to my surprise, I was able to see my computer in the network as a server, i could access my files and it scared the beejesus out of me...any hints??
thanks

Check  | System Preferences | Sharing | Firewall.
If it says "Firewall Off" then click on the Start button.
If it says "Firewall On" then uncheck any unwanted services in the list here and also in the "Services" panel (which is all the stuff that is grayed out on the "Firewall" panel).
If it says "Firewall On" and you don't have any services checked in the "Services" and "Firewall" panels, then we will need more info and checks to ascertain what is going on. But let's do the easy checks first.

Restart/start/stop network from command line

Hi all...
How do I restart/start or stop my network from command line? I red somewhere about using netstart, but I guess the article was refering to OpenBSD and not OS X...
So.. any hints?
Thanks.

Hey You are right there...
OKK..To my knowledge, you can start an application, from the servlet in a thread. But stopping a thread from outside is not safe and even sun doesn't advice.
1. Starting a thread : you can start your program using an Runtime class. But your client program can see if the server port is open or not. So after starting the server program, through servlet, execute the client program. OR you can log every command/step in to a log file, and start the server program and see the log, where currently the program is waiting, so you can check, if the server program has exited.
2. Stoping an application i.e a thread is a tricky thing. One i would suggest is, send data to the server socket with your pass code and the command "Shutdown" with a sequence which will not repeat in the data communication. If the first command is your passcode and "Shutdown" you can kill the server thread from inside the server application. To make this possible, every thing the new connection is accepted, you have to validate the first line is this your command to shutdown.
and repeat the step 1.
Hope this gives you a little idea to proceed. if not let me know...
Cheers
Venkat

Tuxonice hibernate fails stopping network

Similar Messages

Maybe you are looking for