Tv adapter not working since updating ios

since  updating my iPad 2  to iOS 8 my tv adapter no longer works, when I plug the adapter in a message comes up stating this device is not supported by apple

Hello jimtallis,
The steps detailed below may help get your TV adapter to function correctly.
Check the compatibility
Make sure the accessory is compatible with your device. If the accessory is on the Apple Online Store, you can see if your iPhone, iPad, or iPod touch model is listed as compatible.
If your accessory uses the 30-pin connector, you might be able to connect it to your device using the Lightning to 30-pin Adapter or Lightning to 30-pin Adapter (0.2 m).
See if your accessory's compatibility is limited. For example, some accessories might not charge iOS devices if they use FireWire instead of USB to charge.
Disconnect and inspect the accessory, then restart your device
Disconnect the accessory and turn it off, if possible.
Inspect the connection between the accessory and device and make sure that no debris or other damage is present.
Restart your iOS device by turning it off, then back on. When the Home screen appears, reconnect the accessory.
Try a different device
Make sure the issue is with the accessory, if possible. Always use an identical or similar, compatible device with the accessory you're troubleshooting.
If there's static coming from the left audio channel when you use headphones, try connecting the headphones to a similar device.
If the device isn't syncing when connected to the dock, connect it directly to the computer using the Apple 30-pin to USB Cable or try another USB port.
If you're using Lightning to 30-pin Adapter in a connection chain, try using the same adapter on a similar or identical device.
Restore iPhone, iPad, or iPod touch
Restore your iOS device. You should rarely need to use this step with an accessory issue. If the issue only affects a third-party accessory, contact the manufacturer before restoring the device.
Resolve issues with iPhone, iPad, and iPod touch accessories
http://support.apple.com/kb/TS2634
Cheers,
Allen

Similar Messages

  • IPhone 5 with ipodcable/30pins adapter not working after update IOS 7

    iPhone 5 with ipodcable/30pins adapter not working after update IOS 7. The car radio is not responding when I connect the iPhone. iPhone 4s with IOS7 without the 30 pin adapter is working. So I think that the 30 pin adapter is the problem.

    No no dear this is not my problem
    My problem that i mean i say when i on my
    Cellural data my gprs not working and not work my internet

  • TS1702 Certain apps on my iphone are not working since the IOS 6 update, all at tempts to resolve this issue have failed. Any suggestions

    Certain apps on my iphone are not working since the IOS 6 update, all at tempts to resolve this issue have failed. Has anyone got any suggestions. Thanks

    If you don't tell us what solutions you've already taken, we're probably going to waste a lot of time telling you to do things you've already done.

  • WiFi iPhone 4S does not work after update iOS 6.0

    WiFi iPhone 4S does not work after update iOS 6.0

    This sounds more like a hardware issue.
    Have you checked that the dock connector port is not dirty?

  • My mail icon is not working after update ios 6.1.1 ????

    dear sir please give me soluction.
    my mail icon is not working after update of ios 6.1.1

    You can only purchase apps and other media for the county's sore in which yu are located. You account, included payment method, also must be associated with that country.
    Sam applies for updating apps. Note that not all apps are available in all country so y will not be able to update an app if you are in another country and that app is not available in that country or your account is not associated with that country.
    You can change the country and other things by:
    iOS: Changing the signed-in iTunes Store Apple ID account

  • Third-Party USB to Ethernet Adapter not working since 10.8 updated

    Hi I have a third-party USB to Ethernet adapter. Since the update of mountain lion the adapter does not work.
    Is there a driver or something I can do to make it work?
    Thanks

    USB not so good, this very good.
    Thunderbolt to Gigabit Ethernet Adapter

  • The home button on ipad2 is not working since the iOS 6 update

    I've updated to the latest IOS 6 system and now the home button is either freezing or not working.  Can't get out of apps unless I reboot.  Upon rebooting, it doesn't work & if I open an app, it doesn't work again.
    Need a fix.

    Hello ipadisbroken,
    Thank you for using Apple Support Communities.
    For more information, take a look at:
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/ts3281
    Have a nice day,
    Mario

  • Apple av adapter does not work after updating ios 5,01

    apple av adapter does not work after ios 5,01. no video on vga monitor. sound goes out on iphone 4 also.

    Thank you for your interest. Last night i tried again. It worked. there is still problem, so i could find out it that monitor is going to power saving mode then voice goes out and no view on monitor. I changed the power saving settings. And worked well. Thnx again.

  • Wifi not working after updating iOS 8.2 on I phone

    been facing since updated new ios 8.2 wifi connected but unable to use Internet when I disconnect wifi and connect again so it works for very
    short time please help me I have tried everything resetting network resetting I phone off locatin service renew licence but not working

    Good Afternoon Smsf,
    It sounds like you may have tried some, but not all of the steps for troubleshooting your Wi-Fi connection with the iPhone.  I'm curious to know if the issue is happening just in one location (home or work), or if you've tried to get on the internet from a different wireless network.
    Give these steps a try in the order given, and let us know if the issue persists.
    If your iPhone, iPad, or iPod touch won’t connect to a Wi-Fi network - Apple Support
    https://support.apple.com/en-us/HT204051
    Regards,
    - Judy

  • ITunes Store not working since update

    I cannot load anything from iTunes store since the update.    I keep getting the message "The network connection was reset.  Make sure your network connection is active and try again"  
    There is nothing wrong with my network connection.  It is working fine.
    I am using Windows 7 pro 64bit. 
    Trying to download Google Maps.   Bad enough I had to use that POS Apple forced us to use for the last 3 months now they won't let us DL the app that works??

    Hello there, Ahonan.
    The following Knowledge Base article provides some great troubleshooting steps for your issue:
    Can't connect to the iTunes Store
    http://support.apple.com/kb/TS1368
    Specifically:
    Troubleshoot issues on an iPhone, iPad, or iPod touch
    If you haven't been able to connect to the iTunes Store:
    Make sure your date, time, and time zone are correct in Settings > General > Date & Time.
    Note: Time Zone may list another city in your time zone.
    Make sure that your iOS software is up to date by tapping Settings > General > Software Update (iOS 5 or later) or connecting your iOS device to iTunes and clicking Check for Update on your device's Summary page.
    Check and verify that you're in range of a Wi-Fi router or base station. If you're on a device with cellular service, make sure that cellular data is turned on from Settings > General > Cellular.
    Note: If connected to cellular data, larger items may not download. You may need to connect to Wi-Fi to download apps, videos, and podcasts.
    Make sure that you have an active Internet connection. You can check the user guide for your device for help with connecting to the Internet.
    Make sure that other devices (portable computers, for example) are able to connect to the Wi-Fi network and access the Internet.
    Try resetting (turning off and then on again) your Wi-Fi router.
    If the issue persists, try troubleshooting your Wi-Fi networks and connections.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • Hdmi does not work since updating to jelly bean

    Since updating my at305-16 to JB hdmi will not work . I go into settings and select hdmi out but get no signal on tv.

    I think it might be a JB driver issue. I was having the same problem connecting it to my LCD, but when I switched to my plasma it works. The LCD is 1080P Auto the plasma is 720P auto. But fropping my LCD to 7120P didn't help. I don;t know if you have two TVs to try on, but it couldn't hurt.

  • IMessage not working after updating iOS 6.1

    My 4s is not working with my wife's iPhone in iMessage after update.My wife's is not working either.Ive tried turning cellular off and on,been through the settings etc.whats the story with this bug?

    I think I have fixed the problem. I tried resetting, etc. I also tried turning off iMessage and then reactivating. it would work for a short time and then lose it.
    I noticed that I could not iMessage to my personal email address, which is set up in iCloud. When I tried, the Send button stayed grayed out.
    So I edited my contact record, changing the order of two email addresses in the contact record. I had an email address custom labeled iPhone email, and that one was first in my contact record. I changed the order first, making my home (primary) email address the first email in the record. Then, I reentered my phone email address as the last email in the record, and relabeled the phone email address label to read phone emai. Voila! I got a lovely blue talk bubble next to my home/personal email address (the one that is set up with iMessage). Morevoer, I could then direct an iMessage to it. It now syncs my conversations on all devices (iMac, iPhone, iPad 2).
    FWIW, iPad is still running iOS 6.0, but if this fix holds, I will update that later today.

  • Volume button not working after update ios..

    My iphone 4s volume down button not working after i upgrade to ios 6.0...and then i update to ios 6.0.1 its still not working...plz help...what happen...???

    Settings > Sounds > Change with Buttons... Make sure this is set to ON.
    Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).  Try each of these in order until the issue is resolved.
    If none of the above resolves the issue, take the device to Apple for evaluation or possible replacement.

  • Photoshop not working since updated Aperture software

    I have been using photoshop CS5 within Aperture for over a year now.
    Unfortunately Photoshop has stopped working properly since I updated the Aperture software to the latest version.
    I am trying to do some selective colouring but the brush tool is not working.
    Thank you!

    Fern1 wrote:
    I have been using photoshop CS5 within Aperture for over a year now.
    Unfortunately Photoshop has stopped working properly since I updated the Aperture software to the latest version.
    If it is the Photoshop program not working, then resetting the preferences would be the first thing to try if you have already checked any tool options and layer settings that may be creating a problem.
    Pressing the 'Option + Command + Shift' keys immediately after launching Photoshop will invoke the reset dialog before Photoshop loads it's UI. Use the options to reset as needed. Here is a link to the help file for more info:
    http://help.adobe.com/en_US/photoshop/cs/using/WSfd1234e1c4b69f30ea53e41001031ab 64-74aaa.html
    I am trying to do some selective colouring but the brush tool is not working.
    Are you referring to Photoshop here or Aperture (both have brush capabilities)?
    Note - there is currently a known issue with Aperture 3.2.3 that can cause issues with external editors and plug-ins:
    http://support.apple.com/kb/TS4237
    Hope that helps.

  • Wi-Fi Not working since update 2.3.5

    Since updating Android OS to version 2.3.5 I have not had any function in my wi-fi radio. System attempts to scan and never recognizes ANY wifi networks.
    Tried entering/ managing setup manually, but network is listed "Out of Range" even when network is confirmed up by many other devices.
    Any ideas, patches or advice?
    *Wifi worked fine before update

    The obvious painful advice is: Try a hard-reset. If that doesn't do it, it might be time to call VZW support and get a replacement.
    When you installed the update did it appear to install correctly, no error messages or anything?

Maybe you are looking for

  • How to pass a value from inside a while loop outside the loop

    Hello to everybody, I have been searching through the forum but I have not found a certain answer for my problem. I would try to explain my problem as breefly as posible: I have to send by a BNC2120 two signals and acquire an other one thats comes fr

  • CiscoWorks2000 on Solaris 10

    I am currently running CiscoWorks 2000 on Solaris 9 , but the administrator is going to upgrade that box to Solaris 10.  Will CiscoWorks2000 run on Solaris 10? These are the packages I am currently running: - LMS Bundle                = 2.6 - CiscoWo

  • 23" Monitor with Older Macs

    I am posting this here in case anybody needs help in the future. I just got a 23" HD monitor to use with an older Quicksilver 867 mhz G4 (not a dual one, from 2001). I had to install a new graphics card - I used the ATI Radeon 9200 which is compatibl

  • How to stop transaction

    function Trigger_CheckOldPassword(&$tNG) { return Trigger_UpdatePassword_CheckOldPassword($tNG); This is check old password function in ADDT, I want to know what it return to break the transaction, because sometimes I want to do some check through cu

  • Blog excerpt text but without a pic

    Hi There, Is there any way of showing blog entry excerpt text on the blog home page, but without showing the pic? When I move the excerpt length slider, it jumps from a pic and some excerpt text, to no pic and no excerpt text (Just the entry title an