Tv and monitor?

Hi there
ive been looking about for a cable that would split the DVI signal into 2 seperate ones so that i can use my monitor for general working on the mac, and the tv (curently using the s-video adapter from the apple store), however the 2 that i bought from ebay did not do the job (one was the wrong type of dvi) and the other just didnt work.
Anyone know of a way of doing this?
Cheers

ouch thats pricey!
what about something like this? :
http://cgi.ebay.co.uk/DVI-I-Splitter-Cable-DVI-M-to-DVI-F-HD15-F-4-99_W0QQitemZ5 796729541QQcategoryZ74939QQssPageNameZWD2VQQrdZ1QQcmdZViewItem
im not too technically minded with cabling, it confuses me, im suprised ive managed the setup i have about now lol
thats the sort of cable i thought might work?
(the monitor is vga and the s-video adapter is dvi)
Cheers

Similar Messages

  • What is the best product for network mapping and monitoring? I am an inexperienced user). Mac 10.9.2 laptop

    I have lots of questions, but the gist is that I want to know the best product, preferably from the app store, that I can use for network mapping mapping and monitoring.
    I want to get their mac address or other police trackable etc info so I can use my computer safely.
    I am also being cyberbullied.
    I try just using ethernet but still get intruded on, for instance, messages that "other devices are using my ip address". The only other device I own is an iPod that I keep sahut off plus wifi turned off then.
    (NOTE:  You can skip the rest of this message if you want. It regards hacking attempts etc,  a little out of the scope of discussion, perhaps).
    Also a home intrusion where computer was thoroughly hacked with router(s) set up "very very close to me," according to Apple.
    Also, hackers get into my Facebook and gmail and yahoo mail, really,  no matter what I try to do on my computer and how many times I change passwords it does no good.
    Also,  The ip addresses for google and the one in syste preferences and the one looking up my ip address on ip chicken always gets three different results.
    More worrisome it that hackers got into my Wells Fargo account a week after the intrusion even though I changed all account #'s and pw plus notified bank. They also broke into paypal using my new account numbers.
    Also, stuff like Facetime pops up on my computer without my clicking on it even though I'm using ethernet to connect. I've given up on Time Capsule because I'm told that's how the hackers hacked my computer so thoroughly duriung the intrusion.
    Thanks.

    Aubry,
    why don't you send your sequences straight to Compressor first, encode your movies as MPEG 2 and AC3 audio and import all assets in DVD studio PRO?
    G.

  • Create Remote Control and Monitor VI

    Hi all,
    I have 2 VIs. One is PC Host VI and other is cFP2200  real-time running VI.
     Now I can use PC host and cFP shared variable to control and monitor in the same network.
    But I have a problem that I need 2 or more cFP in the same network.How can I seprate to control themone by one?
    They are using the same program but set with different IP.
    Does shared variables are using fix IP and can I type the cFP2000 network IP in PC Host VI to select different cFP?
    How to do ?
    Thanks.
    Robert

    Hello Robert,
    You will need to use a separate shared variable for each cFP. You can create a Case Structure in your Host VI to select which shared variable to use based on which cFP you select. I think that's the simplest option for you.
    There is also a way to programmatically change the data binding for a shared variable, but this requires the DSC Module. Take a look at this article if you want to check out this option: http://digital.ni.com/public.nsf/allkb/2E8BAD0EA218A7558625712E0003F044?OpenDocument
    Product Support Engineer
    National Instruments

  • How to connect an external hard drive and monitor a single port thuderbolt

    how to connect an external hard drive and monitor a single port thuderbolt

    Yu connect the HDD to your Mac and then the monitor to the HDD.
    The HDD  should have TWO T-Bird ports on the enclosure.
    Its called daisy chaining and up to five devices can be connected in this fashion.

  • Hello, I have a Mac computer with NVIDIA 750M dedicated graphics card and monitor EIZO but the problem was there when I was working with Windows and Acer monitor. When I open a file from Camera Raw in PS this is smaller than the screen so I double-click w

    Hello, I have a Mac computer with NVIDIA 750M dedicated graphics card and monitor EIZO but the problem was there when I was working with Windows and Acer monitor. When I open a file from Camera Raw in PS this is smaller than the screen so I double-click with the tool "hand" to fit on the screen, but the picture loses sharpness and becomes blurry. If you magnify the image even only slightly with the tool "zoom" the picture comes back clear. In Camera Raw instead is always sharp. I solve the problem by turning off the graphics card in PS but often use plugin that need the graphics card otherwise the processing time is much longer. I ask for help.
    Thanks.

    Hello, I have a Mac computer with NVIDIA 750M dedicated graphics card and monitor EIZO but the problem was there when I was working with Windows and Acer monitor. When I open a file from Camera Raw in PS this is smaller than the screen so I double-click with the tool "hand" to fit on the screen, but the picture loses sharpness and becomes blurry. If you magnify the image even only slightly with the tool "zoom" the picture comes back clear. In Camera Raw instead is always sharp. I solve the problem by turning off the graphics card in PS but often use plugin that need the graphics card otherwise the processing time is much longer. I ask for help.
    Thanks.

  • Have a problem with my MacBook Pro.5,3 and monitor.  Intermittently, the desk top screen becomes broken up into vertical sections, which appear in the wrong order, creating a haphazard picture.    The Apple icon, usually at top left corner, appears in to

    have a problem with my MacBook Pro.5,3 and monitor.  Intermittently, the desk top screen becomes broken up into vertical sections, which appear in the wrong order, creating a haphazard picture.
    The Apple icon, usually at top left corner, appears in top right corner  in a strip including all that left hand.  When the computer is restarted, the screen goes back to normal.  But I have to move the mouse to the far left of the screen and then up until it reappears on the far right hand side of the screen so that I can hit shut down button.
    It seems to happen randomly though always on desk top and sometimes when I move mouse and computer switches on from rest mode.   My large flat screen is relatively new.
    The video card on this computer, which is approximately two years old, is Nvidia FeForce 9400M.
    Any help would be welcome as my usual source of assistance is not available and I am not well versed in workings of the Mac although I have used one for many years.

    That sounds like a Hardware problem.
    You may be able to confirm that with Apple Hardware Test, or make an appointmenst for a free Genius Bar evaluation.

  • How to install the windows7 agent and monitor the same machine

    Hi ,
    I have installed OMS on Oracle Linux 5.7-64 bit machine. Now I am able monitor the OIM which is installed on Linux. I have some of oracle applications (domains) on windows7 machine. I want monitor the same. On em, agent deployment page I am not able to see the windows agents.
    Can you please guide me how to install the agent on windows and monitor the same?
    OEM version: 11.1.0.1
    Thanks in advance
    Regards,
    Kishore Tummeti

    If you just need to install some agents on Windows the best (imho) option is not to use the push option because getting Cygwin to run can take hours (if at all).
    Here you find a good instruction how to install the agent by hand: http://www.peasland.net/?p=122
    Sometimes the –silent mentioned in step 4b needs not to be put as second argument but as last argument.
    Eric

  • Performance analysis and monitoring of a Forteapplication

    Hello,
    It would be good if one could do some performance analysis and monitoring of
    a Forte application at production time.
    By performance analysis I mean measure the time some selected methods take
    to return. In a CS application such a method would be some selected method
    of a key remote service representative of the application's activity.
    One would like to mesure the min, max, average time, and also give a
    threshhold which when reached will automatically generate an alarm or some
    pre-defined processing.
    The most powerful way would be to use a SNMP application through a Forte -
    SNMP gateway. (see the G. Puterbaugh paper "Building a Forte-SNMP gateway"
    in the 96' Forte Forum proceedings).
    But before going that far some simple means accessible through EConsole
    would already be great.
    A collegue of mine when to that Forum and reported that Puterbaugh said that
    such an agent is currently missing, but that its implementation is not
    difficult.
    I looked at all the agents and their instruments. I came to the following
    conclusions :
    1) instrumented data are available at the granularity level of a partition,
    not at a smaller granularity. For example, the DistObjectMgr agent gives you
    very useful information : the number of events (sent/received) and the
    number of (remote) methods (called/invoked), but this for the entire
    partition. Thus it prevents making tuned observations (unless you partition
    in a special way your application to put in a dedicated partition the thing
    you want to observe and only this thing).
    2) there is no instrumented data related to processing time.
    This leads me to the point that no information observed by the standard
    agents help me figuring out my performances. Thus I have to add at
    development time some lines of code to the methods I potentially want to
    observe later at production time to generate the appropriate information a
    custom agent will then display (process) with the appropriate instruments.
    Does someone share this position ?
    Has someone implemented such an agent and assotiated means ?
    PS: I will probably implement my own one if no other way around.
    best regards,
    Pierre Gelli
    ADP GSI
    Payroll and Human Resources Management
    72-78, Grande Rue, F-92310 SEVRES
    phone : +33 1 41 14 86 42 (direct) +33 1 41 14 85 00 (reception desk)
    fax : +33 1 41 14 85 99

    Hello,
    It would be good if one could do some performance analysis and monitoring of
    a Forte application at production time.
    By performance analysis I mean measure the time some selected methods take
    to return. In a CS application such a method would be some selected method
    of a key remote service representative of the application's activity.
    One would like to mesure the min, max, average time, and also give a
    threshhold which when reached will automatically generate an alarm or some
    pre-defined processing.
    The most powerful way would be to use a SNMP application through a Forte -
    SNMP gateway. (see the G. Puterbaugh paper "Building a Forte-SNMP gateway"
    in the 96' Forte Forum proceedings).
    But before going that far some simple means accessible through EConsole
    would already be great.
    A collegue of mine when to that Forum and reported that Puterbaugh said that
    such an agent is currently missing, but that its implementation is not
    difficult.
    I looked at all the agents and their instruments. I came to the following
    conclusions :
    1) instrumented data are available at the granularity level of a partition,
    not at a smaller granularity. For example, the DistObjectMgr agent gives you
    very useful information : the number of events (sent/received) and the
    number of (remote) methods (called/invoked), but this for the entire
    partition. Thus it prevents making tuned observations (unless you partition
    in a special way your application to put in a dedicated partition the thing
    you want to observe and only this thing).
    2) there is no instrumented data related to processing time.
    This leads me to the point that no information observed by the standard
    agents help me figuring out my performances. Thus I have to add at
    development time some lines of code to the methods I potentially want to
    observe later at production time to generate the appropriate information a
    custom agent will then display (process) with the appropriate instruments.
    Does someone share this position ?
    Has someone implemented such an agent and assotiated means ?
    PS: I will probably implement my own one if no other way around.
    best regards,
    Pierre Gelli
    ADP GSI
    Payroll and Human Resources Management
    72-78, Grande Rue, F-92310 SEVRES
    phone : +33 1 41 14 86 42 (direct) +33 1 41 14 85 00 (reception desk)
    fax : +33 1 41 14 85 99

  • How to give browse and monitor only options of an ICM script to a certain group?

    I am looking for an option in the Feature Control Set, how to give "Browse and Monitor" only options for a certain group in our contact centre. If someone give me some clue, it would be appreciatable.

    Hello Praveen,
    This work at some point. But it's not resolving what I intend to do. When I give "Read Only" previledge, to the certain group, it won't be able to do other tasks what they do day to day. I am looking specifically to give read only previledge in the scripting level. Not at the configuration level.
    Thanks.

  • Mapping and Monitoring all the User and the Field exits

    Hello Dears,
    Are possible, with the Solution Manager to map and monitor all the user and the field exists existing in my ECC6 Productivity Environment?
    Anyone has some documentation?
    Regards to all.
    FS.

    Hello Gurus,
    Someone has any information about this question?
    Regards to all.
    FS.

  • Autonomy, Governance and Monitoring Inter Organisational BPM

    Hi All,
    Which technological approach is suitable for implementing Collaborating BPM across the value chain from the point of view of Autonomy, Governance, Security, and Monitoring? What are the benefits of selecting the one approach over the other?
    These approaches are Centralise, Decentralise, and Peer-to-Peer.
    Explanation of these approaches:
    Centralise CBPM: Ownership of Collaborative System is with one Central Organisation and other Partners Participate in this collaboration through use of various UI’s such as portal. Example, Collaboration between the automobile manufacturer and dealer were automobile manufacturer provides portal for dealer to place order, manage its customer and handle warranty and recalls.
    Decentralise CBPM: In this approach every partner provides communication technology like Web Services for its Business Partner for collaboration. The ownership is decentralise and more flexible
    Peer-to-Peer CBPM: In ideal condition in this approach every Partner should have the same technology which is developed for handling collaborative Business Processes. In this case the same modelling, monitoring, and implementation technology is available across the value chain.
    I kindly request your views and appreciate any questions and guidance.
    Regards,
    Ganesh Sawant

    PROS:
    Using the Webservices you can trigger the BPM Process and pass the values from the web dypro component which will available for the end user and pass it on to the BPM Proess.
    We can use EJB as a webservice, where the automated activity in the BPM can output the value based on the logic in the EJB Function. We can manage the automated activity which runs in the back ground of the process as per our logic and returns the value to the next task.
    CONS
    Using Webservices in the various activity with fewer data is not advisable as it takes longer time to deploy the process. And any change in the data in the webservices requires regularly re importing of the web services.

  • Autonomy, Governance and Monitoring in Inter Organisational BPM

    Which technological approach is suitable for implementing Collaborating BPM across the value chain from the point of view of Autonomy, Governance, Security, and Monitoring?  What are the benefits of selecting the one approach over the other?
    These approaches are Centralise, Decentralise, and Peer-to-Peer.
    Explanation of these approaches:
    Centralise CBPM:  Ownership of Collaborative System is with one Central Organisation and other Partners Participate in this collaboration through use of various UIu2019s such as portal.  Example, Collaboration between the automobile manufacturer and dealer were automobile manufacturer provides portal for dealer to place order, manage its customer and handle warranty and recalls.
    Decentralise CBPM: In this approach every partner provides communication technology like Web Services for its Business Partner for collaboration.  The ownership is decentralise and more flexible
    Peer-to-Peer CBPM: In ideal condition in this approach every Partner should have the same technology which is developed for handling collaborative Business Processes.  In this case the same modelling, monitoring, and implementation technology is available across the value chain.
    I kindly request your views and appreciate any questions and guidance.
    Regards,
    Ganesh Sawant

    PROS:
    Using the Webservices you can trigger the BPM Process and pass the values from the web dypro component which will available for the end user and pass it on to the BPM Proess.
    We can use EJB as a webservice, where the automated activity in the BPM can output the value based on the logic in the EJB Function. We can manage the automated activity which runs in the back ground of the process as per our logic and returns the value to the next task.
    CONS
    Using Webservices in the various activity with fewer data is not advisable as it takes longer time to deploy the process. And any change in the data in the webservices requires regularly re importing of the web services.

  • Difference between Integration Process and Monitoring Process

    Hi Experts,
    What is the difference between Integration Process and Monitoring Process available in PI7.1?
    SAP says that Monitoring process is a special kind of integration process that receives the event messages.
    My doubt is even integration process can receive the event messages.
    Why these two different type of entities are created for the same purpose?
    And what is the technical difference between the two in terms of PI perspective?
    Regards,
    Sami.

    My question is now answered.
    [https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/70a25d3a-e4fa-2a10-43b5-b4169ba3eb17]
    On page 17 of this pdf following sentence is mentioned :-
    From technical perspective, there is no difference between monitoring process and integration process.
    Though logically those are two deifferent things.
    Monitoring porcesses are used to receive only event messages that is comprises of event data only.
    Like Purchase order creation is a event and its event message will have the event data like Order Id, Created on, Created by, Quantity etc., instead of whole purchase order.
    Where as Integration Process is a way to provide solution in some specific circummtances like where we have to automate our process or where we need something in between for the course of communication.
    Guys thanks for your precious time.
    Regards,
    Sami.

  • Connecting home theater projector and monitor in kitchen

    I just ordered a refurbished 2.0Ghz mac mini so I can use it as my home theater computer. I would like to connect it to my receiver's HDMI input so I can display the video on my projector. I also want to connect it to a monitor in my kitchen so I can use it on a daily basis for basic emailing, surfing, etc. It appears that I can connect the mini's mini DVI port with the included mini DVI port to DVI adapter and then attach a DVI to HDMI adapter which will in turn connect to my receiver's HDMI input. Another option is that I can purchase a mini DVI to HDMI cable and avoid the DVI to HDMI connector. Audio would be fed to the receiver from the optical digital output jack to the receiver's optical input.
    In order to connect it to the monitor in my kitchen which has a DVI and VGA input, can I use the mini Display Port? I believe I can just attach a mini display port to DVI cable and attach to my monitor's DVI input? The run is about 25 feet. Will the mini mirror to my projector and monitor this way? Also how can I send the audio to both the receiver and the monitor in the second room. The monitor has a regular mini Jack audio input. Thank you.

    Welcome to the Apple Discussions!
    I use the enclosed mini-DVI to DVI (D) adapter with a DVI (D) to HDMI cable and it works just fine. There is no DVI to HDMI converting the signals are compatible. And I am using an analog patch cable for the audio as you propose with the digital.
    On the kitchen monitor, Apple makes both a mini-DisplayPort to DVI (D) adapter and a mini-DisplayPort to VGA adapter. But you need to know what DVI input the monitor requires, the mini is DVI (D) only. If the monitor uses DVI (D) then you can use a DVI (D) to DVI (D) cable with the mini-DisplayPort to DVI (D) adapter. If you go with VGA, then a VGA to VGA cable with the mini-DisplayPort to VGA adapter.
    Audio for the kitchen is another story. The mini's audio port is either analog or digital. It cannot do both at once. There are USB audio dongles, but I do not think that the Mac is capable of doing both digital and analog audio at the same time, even out of different ports, but I do not know for sure.
    Dah•veed

  • No screensaver and monitor sleep mode

    Hello guys,
    I have the following problem with my Mac Pro (Early 08) and MacBook Pro 2.33 GHz. Both are Mac OS X 10.5.4.
    I have installed the latest Security Update 2008-005. After installation both computers have similar problem with Screensaver and display sleep mode. Both simple don't start. I mean that my laptop and desktop computer don't start screensaver and after some time they don't turn off attached monitor (respectively built-in display).
    I also tried to change time of both things (screensaver time and "monitor sleeping mode" time) to different time. I also restarted both computers few times already.
    My laptop seems working after these "changes and restarts", but Mac Pro doesn't. Monitor is always on.
    Please, do you have any info regarding this? I am quite possitive it was caused by mentioned security update, since before that update, both worked perfectly.
    Thank you for any help.

    Welcome to Apple Discussions.
    Create a new account, name it "test" and see how your monitor and screensaver work in that User acct? (That will tell if your problem is systemwide or limited to your User acct.) This account is just for test, do nothing further with it.
    Open System Preferences >> Accounts >> "+" make it an admin account.
    If the problem is present in the test account also, then it is systemwide. In this case try repairing this with the 10.5.4 Combo Update . This is a fuller install, as opposed to an incremental "delta" update so it should overwrite any files that are damaged or missing. It does not matter if you have applied it before.
    Remember to Verify Disk before update and repair permissions after update from /Applications/Utilities/Disk Utility.
    If the problem does not appear in the test account try starting in "Safe Mode" (It will take a bit more time to startup because it runs a directory check first).
    If that works go to System Preferences >> Accounts >> Login Items and remove them. Boot normally and test. If there are still problems, go to ~(yourHome)/Library/Contextual Menu Items and move whatever is there to the desktop. Then do the same with /Library/Contextual Menu Items. Lastly, try moving /Users/Home)/Library/Fonts to your desktop and restarting.
    Log out/in or restart, if that sorts it start putting items back one at a time until you find the culprit.
    Let us know.
    -mj
    Message was edited by: macjack

  • MBPro and monitor not staying asleep; new problem

    Suddenly my new MBPro and its 24" monitor won't stay asleep!.
    I ordinarily use the 24" monitor, leaving lid on my MBPro shut.
    At night, I choose 'sleep" from the Apple menu and the mac and monitor sleep.
    Suddenly, past couple of days, when I do this,
    -monitor sleeps and then within seconds it pops awake
    -If I raise the lid of my MBPro, the monitor of the laptop is black, does not come up until I use Software preferences to "detect display"
    -only way I can keep both monitor and mac asleep is if I leave the lid of my MBPro up, then choose sleep, then the mac and monitor rest.
    I suspect one of the recent sofware updates may be doing this.
    Anyone else experiencing this?
    Should I reset the PMU on the monitor?
    (Does anyone know the precise steps todo this; I know about removing the battery and holding power key for 5 seconds but have been given different advice on removing power cord or not)

    I've got a very the similar problem. Brand new iMac 24" that shipped with Leopard -- my first Mac after jumping ship fom the Windoze side.
    I had iTunes updating it's album artwork and since it was taking a while, I went to bed. When I turned out my light, I realized the screen had not yet gone to sleep (a good 15 minutes after it should have). So I set up a Hot Corner to put the display to sleep. When I put the mouse there, the monitor would go to sleep, but wake up within 10 seconds. At first I thought it was just the mouse moving as I walked away, but it wasn't.
    I ended up turning the computer off because the big beautiful screen was throwing too much light. Since, I rarely turn my computers off and they're usually doing SOMETHING, this is really annoying.
    Admittedly, I haven't tried some othe the potential solutions above, but this has to be the same bug. Screen saver stays on, monitor comes out of sleep.
    Any help would be.....well.....helpful.
    Ian

Maybe you are looking for