TV Anywhere and MSI 651 loading prob

New post...
Using a MSI 651 with basic config..
2.4ghz p4
512Mb Ram
20Gb HD
Using onboard video
TV@Anywhere Master pci
Win XP Pro with SP2
Loads drivers ok..loads pvs ok...reset machine just in case....try to run pvs but all i am getting is MSIPVS load screen and thats it...
checked all software that is installed...seems ok
checked all hardware via device manager...ok
Drivers and MSIPVS software loaded from cd then used any updates from msi...
Can anyone help.
Thanks

i see you have a mega 651 . did windows install to a c: partition (ie you disabled the card reader before windows setup)? or is it on F:?

Similar Messages

Msi 651 and tv@nywhere card with CRAPPY sound

I have a msi 651 and tv@nywhere card. I have the sound running from the tv card to the mic. in card on the motherboard. The sound is very tinny and hollow and sounds like garbage. Also whenever I start the program I have to manually open my volume control and turn up the volume of the wave. any suggestions?

In front of the CDAudioIn connector there is another "aux" connector called CN16 (or was it CN13?) This "aux" audio connector is a TVAudio connector. If your TVCard has an internal AudioOutput connector, you only have to connect the TVCard with the TVAudioInput (CN16) using a standard CDAudio cable. Else, you have to build a cable with a CDAudio connector on one side and a 3.5 stereo connector on the other side.
See the 651 MoBo scheme in the 651 manual to get more information about how to locate this CN16(TVAudioInput) connector
Regards.

MSI 651 Combo / MS6769 Problem with Temperature

Hi. I´m having some troubles with my mb, since 2 weeks ago. Suddenly, it starts to appear that cpu temperature go 70 º C (158 º F), and i hadn´t do anything. I changed the cooler, and put some new grease, and nothing happen. Then i searched in this forum, and i found a message simmilar, that said something about upgrade bios, and thas what i recently do (WS6769 v1.0 originally, then V1.3, then V1.2). But nothing...
What should i do? buy another mb? I don´t want to.
Thanks.
Claudio

Well, i´m pretty sure that it is the mother board, because, i already changed all what´s possible to change: processor, RAM, hd, power supply, processor.
Din: I don´t know what´s "corecenter". I already upgraded BIOS (to v1.2 that supuestly fix my problem), and put thermal paste (grease? in spanish "pasta disipadora") between CPU cooler and CPU. And i do change the processor (i put a p4 1,8GHz), with other FAN processor (CPU cooler), and the same temperature.
Danny:Those details you ask me:
In a label on the power supply (lVoltage MAXAmpere): +5V 30A, +3.3V 20A, +12V 15A, -12V 0.8A, -5V 0.5A, +5Vsb 2.5A.
It is a Maxpower 300 Watts ATX, model PX300.
On BIOS PC Health: Sys Temp: 18ºC/66ºF, CPU Temp 66ºC/150ºF (up to 70ºC), CPU Fan speed 2909 RPM, Vcore 1.68V, 3.3V 3.26V, +5V 5.10V, +12V 12.03V, -12V -12.19V, VBAT(V) 3.26V, 5Vsb(V) 5.14V.
I have a Celeron 1,8 GHz, socket 478, a MSI 651 Combo MS6769 Motheboard, with nothing else. Hd Maxtor 30Gb, Rewriter MSI 52x24x52.
The problem: From one day to another, it wasn´t load XP. It resets itself after a few seconds (about 5 secs). On the BIOS PC Health section, i actived the CPU Temperature beep on "too much degrees" (i don´t remember the exact name, but that´s the idea). And that´s how i realize that the temperature is the problem. I think it is how the motherboard inform the temperature, and it is a nominal temperature, not real. If it´s real, i already had a burnt processor.
Anything else that can help to find a solution for me?
Very thanks.
Claudio

Problem with Stock A64 HSF and MSI K8N FSR

Hey guys I was wonderinf if anyone could help me with this little problem.
My stock A64 2800+ (newcastle) hsf no longer spins higher than 3500rpm anymore. I first bought my system about 3 months ago and paired it with the msi k8n fsr board. Everything was working fine and under heavy load playing games the hsf would spin to a loud (but effective) 5500rpm max (as measured by speedfan).
About a month ago I managed to kill my k8n board and got a replacement one. Now after setting everything back up, my hsf no longer spins any faster than 3500rpm, regardless if i turn my fan up to 100% in speedfan or run games for hours.
Anyone have a clue?
My specs:
A64 2800+ @ 2.16Ghz (newcastle core)
MSI K8N FSR
1 Gig DDR3200 (generic)
Leadtek Geforce 6600GT

this may sound weird but sometimes i like to return my bios to version 1.3 or below... i want to hear my cpu fan roar! eventhough the reading is high with the old bios, atleast now i'm sure that my CPU is cool... cooler if my CPU fan is on high speed.
hope msi can make a bios update where the user can manually adjust the fan speed to its max... (its true max speed) unlike right now which the max speed only reaches 3000 rpm but its capable of running 5500 rpm.
pray... pray... pray... Lord please have MSI hear my prayers.

Problem with MSI Board and MSI Geforce 4 with Windows XP

I have a MSI 845E Max(MS-6566E)
MSI Geforce 4 - 420
Celeron 1.7 gig
Soundblaster Live
2 Network Cards
and the usual stuff.
I have loaded Windows 98 on my system and it works fine. But then I load Windows XP on and the system starts rebooting. After it reboots my video resets itself and I have to load it back in. I will then reboot and sometimes it will work, sometimes it will not. I try playing a game or even searching the net for awhile, but out of the blue the system will give a very quick blue screen and reboot. And of course when it boots up the video is reset. I loaded all the drivers I could find on MSI's website and used every video driver made by Nvidia and MSI. If I do a Windows XP update to my system the computer will not even boot up. it will just keep rebooting when it is trying to bring up the login screen. Anyone else run into this with Windows XP?

My system sometime freezes. Why ???
P4 1.8A GHz Notrtwood, 256MB PC2700, MSI Geforce 4 TI4400, SB Live 1024
Check my logs:
1)
// Watchdog Event Log File
LogType: Watchdog
Created: 2002-07-23 20:03:27
TimeZone: -60 - Central Europe Standard Time
WindowsVersion: XP
EventType: 0xEA - Thread Stuck in Device Driver
// The driver for the display device got stuck in an infinite loop. This
// usually indicates a problem with the device itself or with the device
// driver programming the hardware incorrectly. Please check with your
// display device vendor for any driver updates.
ShutdownCount: 108
Shutdown: 0
EventFlag: 1
EventCount: 1
BreakCount: 1
BugcheckTriggered: 1
DebuggerNotPresent: 1
DriverName: nv4_disp
DeviceClass: Display
DeviceDescription: NVIDIA GeForce4 Ti 4400
HardwareID: PCIVEN_10DE&DEV_0251&SUBSYS_87111462&REV_A3
Manufacturer: NVIDIA
DriverFixedFileInfo: FEEF04BD 00010000 0006000D 000A0BD6 0006000D 000A0BD6 0000003F 00000008 00040004 00000003 00000004 00000000 00000000
DriverCompanyName: NVIDIA Corporation
DriverFileDescription: NVIDIA Compatible Windows 2000 Display driver, Version 30.30
DriverFileVersion: 6.13.10.3030
DriverInternalName: nv_disp.dll
DriverLegalCopyright: (c) NVIDIA Corporation. All rights reserved.
DriverOriginalFilename: nv_disp.dll
DriverProductName: NVIDIA Compatible Windows 2000 Display driver, Version 30.30
DriverProductVersion: 6.13.10.3030
2)
// Watchdog Event Log File
LogType: Watchdog
Created: 2002-08-12 18:53:23
TimeZone: -60 - Central Europe Standard Time
WindowsVersion: XP
EventType: 0xEA - Thread Stuck in Device Driver
// The driver for the display device got stuck in an infinite loop. This
// usually indicates a problem with the device itself or with the device
// driver programming the hardware incorrectly. Please check with your
// display device vendor for any driver updates.
ShutdownCount: 235
Shutdown: 0
EventCount: 8
BreakCount: 8
BugcheckTriggered: 1
DebuggerNotPresent: 1
DriverName: nv4_disp
EventFlag: 1
DeviceClass: Display
DeviceDescription: NVIDIA GeForce4 Ti 4400
HardwareID: PCIVEN_10DE&DEV_0251&SUBSYS_87111462&REV_A3
Manufacturer: NVIDIA
DriverFixedFileInfo: FEEF04BD 00010000 0006000D 000A0C0A 0006000D 000A0C0A 0000003F 00000008 00040004 00000003 00000004 00000000 00000000
DriverCompanyName: NVIDIA Corporation
DriverFileDescription: NVIDIA Compatible Windows 2000 Display driver, Version 30.82
DriverFileVersion: 6.13.10.3082
DriverInternalName: nv_disp.dll
DriverLegalCopyright: (c) NVIDIA Corporation. All rights reserved.
DriverOriginalFilename: nv_disp.dll
DriverProductName: NVIDIA Compatible Windows 2000 Display driver, Version 30.82
DriverProductVersion: 6.13.10.3082
3)
// Watchdog Event Log File
LogType: Watchdog
Created: 2002-09-07 22:22:41
TimeZone: -60 - Central Europe Standard Time
WindowsVersion: XP
EventType: 0xEA - Thread Stuck in Device Driver
// The driver for the display device got stuck in an infinite loop. This
// usually indicates a problem with the device itself or with the device
// driver programming the hardware incorrectly. Please check with your
// display device vendor for any driver updates.
ShutdownCount: 408
Shutdown: 0
EventCount: 14
BreakCount: 14
BugcheckTriggered: 1
DebuggerNotPresent: 1
DriverName: nv4_disp
EventFlag: 1
DeviceClass: Display
DeviceDescription: NVIDIA GeForce4 Ti 4400
HardwareID: PCIVEN_10DE&DEV_0251&SUBSYS_87111462&REV_A3
Manufacturer: NVIDIA
DriverFixedFileInfo: FEEF04BD 00010000 0006000D 000A0FC9 0006000D 000A0FC9 0000003F 00000008 00040004 00000003 00000004 00000000 00000000
DriverCompanyName: NVIDIA Corporation
DriverFileDescription: NVIDIA Compatible Windows 2000 Display driver, Version 40.41
DriverFileVersion: 6.13.10.4041
DriverInternalName: nv_disp.dll
DriverLegalCopyright: (C) NVIDIA Corporation. All rights reserved.
DriverOriginalFilename: nv_disp.dll
DriverProductName: NVIDIA Compatible Windows 2000 Display driver, Version 40.41
DriverProductVersion: 6.13.10.4041

I have IE and Mozilla FF loaded on my vista run laptop. I have removed and reloaded the FF program without success. Internet Exployer runs fine. Help!!!!!!

I have IE and Mozilla FF loaded on my vista run laptop. I have removed and reloaded the FF program without success. Once loaded I click the shortcut, but nothing happens. Internet Exployer runs fine. Help!!!!!!
== 1 month ago ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.0; Trident/4.0; SLCC1; .NET CLR 2.0.50727; Media Center PC 5.0; .NET CLR 3.5.30729; InfoPath.2; .NET CLR 3.0.30729)

A possible cause is security software (firewall) that blocks or restricts Firefox without informing you about that, maybe after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox.
See [[Firewalls]] and http://kb.mozillazine.org/Firewalls
See also http://kb.mozillazine.org/Browser_will_not_start_up

Core i7 2600k and msi z68a-gd55 b3 acting up and lagging on me

HI, I just built a new gaming rig and for the life of me, I can't figure out why im getting lag and im not impressed coming from a P4 Dual core.. OK here's my setup
Core 17 2600k with CoolMaster Heat Sink
MSI Z68A-GD55 B3 mobo
4x4gb DDR3 1600 Corsair Vengeance Ram 9-9-9-24 Total 16Gbs
EVGA GTX 560TI 2Gb Video Card
CORSAIR GAMING SERIES 800 Watt 65a on the 12v Rail
(ONLY USING ONE HDD GOT 2 HDD'S TO TROUBLESHOOT TO SEE IF ITS THE HDD)
CURRENTLY IN USE FOR MAIN HDD 1 Seagate Barracuda 7200 rpm 1TB HDD
1 Western Digital Cavier Black 7200 rpm 2TB HDD
Running on Windows 7 Ultimate x64
So i install the OS and updated all my drivers and for all hardware and updated the BIOS and i got everything stock in the BIOS, No overclocking yet and when im just surfing the web or open up an app, I get this annoying lag and my CPU load and Memeory load will be at 0-5% and it will effing lag... Now i changed out everything thinking it was the problems, down to the Ram 3x's, CPU 1x, Motherboard 3x's (I'm even coming from a different board thinking, that was the the problem. Since i read alot of bad reviews on it.. AN INTEL DP67BG Extreme Series board and come over to the MSI im currently using ) and my PSU 1x.. and nothing fixed it.. When i run a CPU Stress test it comes back with no ERRORS... Now when i do a Memory Test in the BIOS of the mobo.. It will PASS, no problem.. but if i run it in MEMTEST86 it will FAIL right away.. Then when i test each stick 1 by 1 in BIOS they PASS, NO PROBLEM, But not in Memtest86... So i bought 2 Pairs of 4 new sticks 2 different times.. the same kind of Ram, "which are compatible with this board" and the same thing happens with the lastest MSI BIOS i'll test them with the Memory Tester From BIOS, all 4 sticks and 1 by 1 and then 2 sticks for dual channel in slot 1 nearest CPU and slot 3 and they will PASS but when i try with Memtest86 they FAIL... So i dont think its the Ram cuz 3 different sets are Failing... i highly doubt it's hardware anymore... Agree?
Can someone PLEASE HELP ME..! I've been working on this build for 2 straight weeks day and night and i have a bad taste in my mouth over this build. this isnt my first one either and i never, never, ever had theses problems before... i'm about to quit and go back to a p4 dual.. But i don't like to quit and want to feel the power of a i7 2600k that everyone swears by...
please lead me to fixing this... if you can email me for one on one support id compensate you for your time.. [email protected]
BTW i brought it by geek squad and they couldnt figure it out either... but he didnt know his from his elbow lol
Thank you, Marco

ok so the WD is still doing it but not as bad as the seagate was! as for UEFI/BIOS im on 22.8 loaded with default setting except for the dram voltage now, and it was set at 1.4 something i changed it to 1.5 like you said and that help some but i still get lag here and there showing up when moving the mouse with is a microsoft wireless 4000
update so after setting it to 1.52v in bios im noticing when typing i get freeze up with the cursor and when i open apps the hour glass is appearing at longer then normal even for a p4 chip
any other ideas why is this becoming a nightmare with my hardware can you give me a run down on what everything should be set to in bios.. cuz it looks like default settings are off and im having video card issues but that's for another forum but im thinking they all tie in together..
thank you so much for helping me looks like no one cares to help a fellow builder out.. but when its them in my shoes there quick to beat dowm the door for answers... sorry im just frustated that over a grand invest and my smartphone feels snappier and responsive then this build.. oh i ya check cpu and the board for mis seated chip and bent pins and correct amount of good paste and heat sink seated and torqued down correctly.. so im not sure anymore im sooo i just want to

Msi z77a-g45 and msi control center error please replace ME version??

I am getting a error for some reason when i open MSI control center that tells me to Please Replace the ME version, i'm not sure why i'm getting this error out of the blue, is very strange, only thing i did was uninstall intel HD 4000 driver and reinstall it as i was getting a crash, i was using it as a extra monitor. but i don't think that had anything to do with this. I have not used control, center in a while thought i would open it up and now i get this Please replace ME version, i have uninstalled intel management engine and re d-loaded it and reinstalled it from my msi driver page, nothing works please help.

Quote from: Beavise on 18-April-15, 12:46:23
How can i flash to latest one when it is the latest one i have version bios reported as E7752IMS V 2.12 and ME version 8.1.50.1456 i think this is all current is it not?
Quote from: Beavise on 18-April-15, 12:46:23
How can i flash to latest one when it is the latest one i have version bios reported as E7752IMS V 2.12
in your signature you have listed BIOS 2.5
Quote
and ME version 8.1.50.1456 i think this is all current is it not?
basically yes, unless your ME version is somehow corrupted,
or when bios was flashed your ME wasn't updated
if issue persist reflash the bios to the one that i linked you,
its still newest than 2.12 and will include proper ME update,
so you will know that issue isn't there after reflashing
Quote
I have not used control, center in a while thought i would open it up and now i get this Please replace ME version, i have uninstalled intel management engine and re d-loaded it and reinstalled it from my msi driver page, nothing works please help.
other things that you can try before flashing:
install reinstall ME drivers from MSI web for your board:
http://download.msi.com/dvr_exe/intel_me81_win78_xp.zip
you said that you already done this..
you can also try with those ME drivers instead: http://download.msi.com/dvr_exe/intel_me10_mb.zip
and are you using control center 2.5.060
from msi web for your board?: http://www.msi.com/support/mb/Z77AG45.html#down-utility&Win8.1 64
Quote from: Beavise on 18-April-15, 12:51:55
ALso if it's not does your usb flash tool work in WIN8.1 UEFI bios?
yes
Quote
I am getting a error for some reason when i open MSI control center that tells me to Please Replace the ME version, i'm not sure why i'm getting this error out of the blue
sounds like some kind of OS mess or driver mess,
you can try to load some of older windows restore point
assume if you haven't flashed anything and worked fine before

Running Windows XP service pack 3. Updated Firefox from 8.0 to 9.0. Now when Firefox opens "The URL is not valid and cannot be loaded" is displayed in a window and no home page appears. What's wrong?

Running Windows XP service pack 3. Updated Firefox from 8.0 to 9.0. Now when Firefox opens "The URL is not valid and cannot be loaded" is displayed in a window and no home page appears. What's wrong?

That issue can be caused by an extension that isn't working properly.
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

Why do i keep getting an Alert message saying "The URL is not valid and cannot be loaded "?

Why do i keep getting an Alert message saying "The URL is not valid and cannot be loaded "?
This happens a lot regardless of the web page. I continually have to restart FF and it persists still

Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]
* [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
* Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
* Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

HT202159 I have been on to apps store logged in and gone on my purchurse to try and re down load Mountin Lion however it just states an error as accord I can't get it to re down load to launch pad in lion

I have been on to apps store logged in and gone on my purchurse to try and re down load Mountin Lion however it just states an error as accord I can't get it to re down load to launch pad in lion

1. You did not get an error message telling you that your iPhoto library was getting full. You got a message telling you that your HD was getting full, right?
OS X needs about 10 gigs of hard drive space for normal OS operations - things like virtual memory, temporary files and so on.
Without this space your Mac will slow down as the OS hunts for space on the disk, files will be fragmented, also slowing things down, apps will crash and the risk of data corruption - that is damage to your files, photos, music - increases exponentially.
Your first priority is to make more space on that HD. Nothing else can be done until you do.
Purchase an external HD and move your Photos and Music to it. Both iPhoto and iTunes can run perfectly well with the Library on an external disk.
Your Library has been damaged from being run on an overfull disk.
How much free space on it now?

On my registered iTunes computer, the following message appears every time one plugs in a device and refuses to load said device to be synced: "This iPod cannot be used because the Apple Mobile Device service is not started". They are all registered. Help

On my registered iTunes computer, the following message appears every time one plugs in a device and refuses to load said device to be synced: "This iPod cannot be used because the Apple Mobile Device service is not started". Each device has been registered onto this account and this computer, and all have worked finely in the past. I am so confused as to why now seemingly without reason, none of our apple devices (one iPod, two iPhones) are allowed to have music and other material downloaded onto them. Also, as a side note, they still are charged by plugging them into the computer, however they do not even show up on the left-hand sidebar in iTunes.
It should also be noted that for my iPhone it does not allow for the new update software to be uploaded; it just says that an error has occurred, nothing more.

Try Here > AMDS > http://support.apple.com/kb/TS1567

The URL is not valid and cannot be loaded

seems like maybe firefox mishandles untrusted certificates?
It gives error: Alert The URL is not valid and cannot be loaded.
example:
https://notes.corp.cat.com/
other browsers can load this URL just fine. When I visit it in Firefox, I get the error in a simple little message box with a yellow triangle exclamation point, titled "Alert".
ALSO.... when I click the "Home" button in firefox, I get the error, and the home page does not load. Currently the home page is set to "Mozilla Firefox Start Page."
changing the home page to: http://www.google.com/ allows the home page button to work normally.
restoring the home page to default brings the error behavior back when clicking the home button.
changing the home page to: https://notes.corp.cat.com/ produces the same error, just like when I manually type in an https URL with a funky security certificate.
This problem only seems to happen on secure URLs with untrusted certificates, i.e. sites that are too cheap to pay to have their certificate registered with one of the certificate vendors or however the hell that works, so as a result every time you visit their web site, your browser starts to whine that it might be a forgery or whatever.
It used to be in Firefox that I could load these pages and just specify that I want to trust the site anyway. Now firefox gives this error that doesn't allow the user to know what is really going on or what the reason for the error is. It is as if the developers decided that users are too stupid to decide if they really want to visit the site or not, so as a result Firefox is just refusing to visit any web sites where the authenticity of the certificate can't be verified? Hey, it's not a bad idea, to be honest. :-) But it's kind of annoying, because here I am, sort of smart enough to know what I'm doing, but I don't have the choice in the matter...
I restarted with all add-ons disabled and that didn't help. I don't have much installled in the way of add-ons anyway. All I have is JAVA quick starter 1.0, and Adobe Acrobat, Java development toolkit, Java platform SE, Microsoft DRM, and Windows Media Player Plug-in Dynamic Link Library. Not even Flash. All the above is disabled now that I rebooted with add-ons disabled, and I still have the issue.
thanks for any help you can provide.

Please [https://bugzilla.mozilla.org/show_bug.cgi?id=713167 see this.] Installing [https://www.microsoft.com/download/en/details.aspx?id=5638 Visual C++ 2005 SP1] or the .Net Framework 3.5 SP1 may help mitigate the issue.

I keep getting message "mozila Firefox not responding." It takes minutes to down load a site - some times it just gets in a loop and never down loads. Then when I try to click on it again screen goes opaque and i get the same message.

I 'm getting message "Mozila Firefox not responding." It takes minutes to down load a site - some times just gets in a loop and never down loads. The little circle at top just keeps going round in circles .
Then when I try to click on the screen again the screen goes opaque and I get the same message re " Mozilla Firefox not responding" - and it is minutes before I can get back in to close down screen.
I have downloaded Fire fox version 4 and this is still happening.

See:
* http://kb.mozillazine.org/Error_loading_websites

This application is not compatible with your device and cannot be loaded

Hi,
I have been trying to load an application to my BB 9000 since a monday and getting this error "This application is not compatible with your device and cannot be loaded".
As evident, I am new to BlackBerry development and got to port an existing J2ME project on BB 9000.
To load application I am using
- BB Dektop software 5 (latest)
- BB Device Software 4.6 is installed (which is the version of BB 9000 as well)
I am able to load sample JDE 4.6 applications but I build my project through same JDE and through eclipse (JDE compoment 4.6.0.19) as well but couldn't load it,
I even signed my app since I am using net.rim.device.api.servicebook api which requries signing.
Can someone please explain me
1) why this error occurs in first place
2) how to setup right envioroment to load an application on a given BB handset (BB 9000 vodafon India to be specific)
3) How would manage this process on a single machine if I have 4-5 different BB handsets.
I shall be thanful for any logical pointer to solution to these problems.

Hi,
The main problem with your genrated ALX file. I think in your ALX file contains <fileset Java="1.49" _blackberryVersion="[5.0.0)"> TAG and remove the _blackberryVersion attribute. Then it will work.
So your final ALX file contains
<loader version="1.0">
   <application id="App">
       <name >
           App1
       </name>
       <description >
       </description>
       <version >
           1.0.0
       </version>
       <vendor >
            Vim
       </vendor>
       <copyright >
           Copyright (c) 2010
       </copyright>
       <fileset Java="1.49">
           <directory >
               5.0.0
           </directory>
           <files >
               App.cod
           </files>
       </fileset>
   </application>
</loader>
Even thought it is not installed then make sure that your application may not delete from your device. Select the application and click on delete button in Desktop manager.
Still u didnt slove the problem then insted of
<directory >
               5.0.0
    </directory>
replace as
<directory >
</directory>
Regards:
Jitendra.B
Vimukti technologies Pvt Ltd
Project Manager

TV Anywhere and MSI 651 loading prob

Similar Messages

Maybe you are looking for