Tv anywhere master... till when?...

Hello everybody and excuse my english...
I have a tv anywhere master card and i'm getting tire of it... (i think i'm going to get a tv tuner card based on ATI's new Theater 550 Pro processor either POWERCOLOR or another brand... NOT Msi...)
the reason as you all can guess is the DRIVER/SOFTWARE problem... (even with these you can tell that the hardware is pretty good)
for example this hissing sound the card makes when windows starts... the best we can do is to change the input source to aux instead of line in in order to get it muted when the OS is booting, ppl for me that is a solution if someone give the card for free, not for something i paid for...
the issue is supposed to be related with the Crossbar Driver... well when you see the beta driver the AUDIO and VIDEO capture driver are new but the TV TUNER and the CROSSBAR driver are the same problematic drivers of almost 2 years ago... (this is supposed to be fixed in the beta drivers... well i still had the problem...)
anyway i installed the beta drivers and had to install the old ones again because the image gets grainy and in general of lower quality...
well this is what i wanted to share my thoughts with you guys
good luck

And you tried the new drivers here https://forum-en.msi.com/index.php?topic=77045.0

Similar Messages

TV@anywhere master huge problem

I have the TV@anywhere master and when i am changing the channel ( after a few times) the comp friezes

Just to make sure I understand. It is your computer that freezes, not the TV tuner program. And you have the problem in at least one TV tuner program other than MSIPVS. PowerVCR is also freezing. Again it is not your computer that is freezing but the TV tuner programs.
You did not answer the question: did you install the CD software or did you install the software from the MSI site?
If you did install the software from the MSI site and the tuner programs are freezing, check if the TV tuner drivers (MSI 8606 Video/Audio Capture) are sharing an IRQ with another major component (example video / audio card, ignore USB controllers). In Windows you can do this using the MSInfo32.exe program. If the IRQ of the tuner driver is shared, move the TV Tuner to another PCI slot.
If you did not install the software from the MSI site, download the MS-8606 files and install them.

What MSI should do to fix MSI TV Anywhere Master !

able Of Content for below email:
1) context
2) essentials on how-to definitively fix MSI TV Anyhwere Master while natively recovering your customers long-term trusting in MSI logo.
- - - - - -DETAILS:
1) My neighbors have recently bought 2 pieces MSI - TV Anywhere Master tuner cards by following my latest advices.
They both are students engaged by few media tasks in our campus to provide internal training by video samples and news broadcasts in local areas.
One of them told me his intention to even start some anti-MSI virtual campaigns through world-wide forums against your product as a reasoned revenge for huge effort with no results during lot of time-loossing trials to setup, stabilize and properly use your MSI proprietary software and drivers (MSIPVS-WinDVR) delivered by with this product's original package.
Now they claim as many others found on alike forums, all money back and tens hours stress compensations from proximate shopping center cause these MSI tuner cards not working as they thought while comparing MSI product with other's alike. It seems that MSI duped its long-term customers.
They tested on both licensed and updated Windows 98 SE and latest Windows XP Pro (latest service packs included) but received undesirable results that we will compact them as below to suggest you what and how to fix it.
2) Best ways to fix it :
I. redesign all its drivers to include that MSI "secret" proprietary strings-keys requested to keep full activated your TV Anywhere Master card (CX23881-19 chipset) anytime for any other tuner/capture application (other 3rd party software like ChrisTV Pro, DScaler, PowerVCR, Virtual VCR /freeware!!!)
Currently, all these better featured applications can setup and recognize most of your competitors alike cards (based on new 10-bit CX2388x chipset) but not yours MSI Anywhere !
It is worst way to freeze by default your customers expectations and usage development!
So, unlock your card by new drivers really compatible with Microsoft OSs so, nobody will complain anymore against MSI hurried & unfinished or less-featured products due to any software related issues!
Remind that you are one of greatest HARDWARE producer not SOFTWARE, so, better provide what you are to provide! Let others much more trained for software purposes to do it and to compete among themselves while getting much more freely alternatives to promote your cards to an wider range of users with different skills and interests.
II. redesign MSIPVS-WinDVR's setup panel to recognize and include any codec previously installed in the system during its launching, like your competitors' above software already done it successfully ! Mostly focus on DivX for video and MP3 for sound and alike codecs which are mostly used and available today everywhere (>70%!) both licensed and freeware releases, comparing with those obsolete MPEG files! There is no need to train yourself by own software cause you better ask people like Chris(TV Pro) to do it for you much better and cheaper! Forgot about MPEG2 and MPEG4(yours!) cause are for nothing ! Your MPEG4 not works on others PCs while MPEG2 is no use for most customers due to large resources requirement with even lower performances than an very well-settled DivX, which needs ten times lower space!!
Go DivX 5x and MP3 for any software based encoding purposes is the only target for your recording settings panel!
Also for Win Producer /Win Coder which can not not administer DivX and MP3 correctly. (ask VirtualDub to replace it cause it is working infinitely better!)
III. channel settings and scanning must be also redesigned to get more stable and transparent to the user: add a new column with its channel frequency and a real working stable control to FINE tuning and SAVE.
Finally, BEST is to setup a dedicated text file to save and launch all configurations within. Anytime when push APPLY or SAVE, to write something in that file and then to read from there instead of use usually unstable system registry dynamic records. In the same way, customer who want to fix something or really save their settings to preserve your cards and applications for unexpected failures, development etc, will be able to adjust on his own risk some settings which were not correctly settled by the application etc.
This is to provide much more reliability to this card usage and to compensate potential bugs in future releases.
IV. Provide an interface like above (III) to the enduser who mostly demands to reconfigure remote control unit which is now too poor and not include essential controls like start/stop recording etc. All remote controls to be written in a text file at also enduser disposal to modify shortcuts in order to reallocate remote control buttons to another panel controls etc.
V. MSI-Radio tuner must have channel name (retrieved from FM table settings) displayed under the frequency and much more selectivity and real correct scanner (not use that "less stations" control). It could be very demanded a wider range scanning from 30 MHz up to 110 MHz for many other locations.
Both for TV channels (see MSI-PVS to provide full tuning all frequencies including manually settings each channel!)
If it is hard to do it for Windows 98 release, provide them for XP at least but inside a better structured website than now. In the present there are still many confusings and no stable procedure (that provided on the original CD has lot of bugs and missings risking to freeze the system!) regarding from where to download updates (too many different addresses to discover inside MSI-support site). MSI TV Anywhere Master must have its own unique sub-site with all updates downloads included in the same page, both for drivers and for applications! Also is a must to include WDM MS-8606 drivers instead of current ones to not receive anymore that error "nVIDIA WDM universal Capture" not found.
Please email me and my neighbor marcellino
([email protected]) when demands described above will get fixed !
Thank you in advance and wishing MSI good lock for better results!
Regards,
TekSam & marcellino
([email protected])

Exactly my thoughts.
Probably they're even too affraid to give us some answers about how, what and where.
I had a previous descussion about an MSI mb that wouldn't accept a 40GB Maxtor hd. My asus mb didn't have a problem with detecting it.
Their reply was to flash to the latest bios version, which I already wrote that I did that in my e-mail to them.
A friend of mine had the same MSI mb, guess what??? same problem. His Dell pc, no problem.
Wrote back to MSI, waiting for 3 years now , never received an e-mail. (wrote a couple of reminders).
I now bought this tv nowhere card and I have the same problem as many people have.... alot of sh*t .... and not working. No refund, 0 support, users must help other users to solve certain issues, ---> 10 clean versions of winXP and hours and hours of stress
This will be the last MSI product that I will EVER buy.

Where is thet *.dll (TV Anywhere Master)

I look... but didnt find any message about anyone having problem with Windows ME and driver for TV Anywhere Master.
I cant stand that Im the only one who have problem with drivers on Win ME, simply reports that cant find tsbyds.dll or tsbyd something.dll I cant remember right now.
On Win XP with or without SP1 work just fine....

I cant beleve that no one have problem with missing TSBYUV.DLL when they are instaling drivers on Win ME.
Nevermind, thanks for the support.... I will find solution my self.

TV anywhere master: remote don't work, radio program will not run

Hi
I hope someone can help
A new pc with TV anywhere Master...
Specks
here http://www.esmannoglundsteen.dk/Report.htm
Tv works fine
1: remote vwill not work!
2: Radio program keeps chrashing after install, meaning it installs fine, but when I try to run it it stops and then " do you want to file an errorreport to microsoft" - I did dl the new version!
Thanks in advance
Kind regards
Morten Lundsteen
Denmark

Quote from: Dr Stu on 05-July-05, 05:24:01
more questions!
why do you use the cd analog audio lead? if you are using Windows 98SE or late, windows supports Digital Audio Extraction, whereby it reads CD audio data digitally through IDE connection, so you can throw that darn silly grey wire away now
are you using a USB card or bracket? they are moveable, you know
you say you press the FM button to start the radio program. what happens if you manually launch the radio player yourself?
Hi Dr Stu
About the CD analog audio lead: Ohh no if you knew how much trouble I went to to get the sound working in the first place - the lead is (was) the reason I got sound on the TV part! Please don't ask me to take it out!! :-) (As it is now - with the new software I have to choose "line in" [apply] then "CD" [apply] to get sound] But- hey - sound is good on a TV
I know the bracket is moveable - sure - but after all this fuss - I am not at all sure it's worth it - just to get the radio working.
If I launch the radio manually - it's the same " do you want to report to MS" and all that.
Kind regards
Morten

TV@anywhere Master locks up

Just purchased a new TV@anywhere Master 8606. The thing just does not work. There are two problems that make this card completely useless in my system:
1. MSIPVS constantly freezes. Sometimes it freezes the entire computer - even the mouse cursor won't move anymore. I have to hard reset the machine. This happens constantly. I've never had MSIPVS run for more than a minute or two.
1. The MSIPVS application only finds half the channels. I have an external antenna and my reception is near perfect. All channels display perfectly on a TV using the same cable and arial point. I even tried another brand of TV card and all channels worked perfectly.
For the channels that it does find, the image quality is poor.
The machine I am using is a new P4 2.4 Ghz machine with hyperthreading CPU. Maybe MSI's software has trouble with these new CPUs?

I use a TV@nywhere master on and AMD AthlonXP PC with minimal problems. I have heard of others with P4s have simular problems to yourself.
The Drivers and MSIPVS do need to be fixed as there are definite problems especially if you try to use tuner with any other software. The Tuner on board the TV@nywhere master is very new and does not seamed to be suported correctly by any software I have tried. I must admit that I have minimal problems with MSIPVS but the tuner drivers are not satifactory. I can state that this card has exceptional quality on capture from good sources and a great display when TV is played via Svideo or Composite-in using either Dscaler or ChrisTV.
I did have problems getting the MS-8606 Audio drivers to install initally but once I had manually installed them there were no more problems. Maybe worth checking that the drivers have been installed. In Device Manger you should see references to;
MSI 8606 Audio Capture
MSI 8605 Crossbar
MSI 8606 Tuner
MSI 8606 Video Capture
if any of these are missing or you have a yellow exclaimation mark next to them, either re-install the drivers and/or try moving the card to another PCI slot but do not use the slot next to the AGP slot. Some machines are very fussy as to which PCI a TV card will work in.

TV Anywhere Master Installation instructions combined with WinProducer

Installation of MSI TV Anywhere Master on Windows XP SP1, DX9 (Should work on other installations but tested on this.)
First, before beginning go to http://www.msi.com.tw/program/support/driver/dvr/spt_dvr_ten.php?UID=193 and download the new driver package. You will need to run the executable and extract it to a folder before proceeding.
UN-INSTALLATION
Before proceeding you need to uninstall all of the software that came with the TV Anywhere Master. Below are instructions on how to do this.
WinProducer Un-installation
Now, open Add/Remove Programs. Locate InterVideo WinProducer and remove it, it will request you to reboot, go ahead. Allow it to remove all files include locked files that it requests to do at next reboot. REBOOT
MSIPVS Un-installation
Reopen Add/Remove Programs and locate MSIPVS and remove. Allow it to remove all files include locked files that it requests to do at next reboot. REBOOT
MSI Radio Un-installation
Reopen Add/Remove Programs and locate MSI Radio and remove it. Allow it to remove all files include locked files that it requests to do at next reboot. REBOOT
TV Tuner Driver Un-Installation IMPORTANT!
Reopen Add/Remove Programs and locate and remove TV Tuner Drivers. These are the drivers for your TV Tuner even if they don’t say MSI! REBOOT
Now you are ready to proceed with the installation.
INSTALLATION
Installation of MSI TV Anywhere Master on WinXP
TV Tuner Drivers
Locate the folder you extracted the drivers downloaded from the link above and run “PVSSetup”. Follow all onscreen instructions. REBOOT
WinProducer Installation
WinProducer needs to be installed next because of a file incompatibility with MSIPVS.
Insert the CD InterVideo WinProducer / WinCoder. Follow the onscreen instructions to reinstall. REBOOT
MSIPVS and MSI Radio Installation
Insert the CD Labeled InterVideo MSIPVS.
In the AutoRun make sure you Select MSIPVS, NOT the drivers. If you select the drivers you will have to start over by removing the software again.
Follow the onscreen instructions and during the install when it encounters a locked file select “reboot”. Once completed reboot the system.
You should be all set now! Have fun….. If this doesn’t work on your system please let me know your config and what problems you are still having….
Thanks,
Larry (digitaldreams)

Note: NTSC region, FFDSHOW set to accept raw video, output just about anything, de-interlace set to ffmpeg (seems better than 5-pass or TomsMoComp; any attempt to link in a DScaler .dll crashes the player) resize and sharpen (to your display res, set "No Aspect Ratio Correction), "Experimental" method (much less load than Lanczos, which is slightly better) 1.60 for both luma and chroma.
1. Load MPC, click on File>Open Device>Select "Conexant 2388x Video Capture", click OK. If necessary, View>Capture to get control frame.
2. Play>Filters>Conexant 2388x Video Capture>MSI 8606 Crossbar>drop Output Menu>select Video Decoder Out (this turns on the Apply button)>Tick Link Related Streams>Click Apply Button (and voila, sound)>Click OK to exit.
2a. Play>Filters>MSI TV Audio>Set Channels and Language (seems to be a one-time only requirement).
3. Play>Filters>MSI 8606 Tuner>(set country code, tuning mode, input & video standards if necessary) change channel once via filter keypad or up/down arrows (seems necessary to get pageUp/Down keys to be recognized).
4.Play>Filters>Conexant 2388x Video Capture>Properties (make sure Video Standard under Video Decoder tab is correct)>Video Proc Amp>Set to personal preferences (I like Sharpness at max setting, you may find it 'grainy').
5. Usually, the tuner output reverts to RGB16; FFDSHOW (for me, anyway) seems to need YUY2. Then crank the horizontal & vertical res to max, click on "Set".
6. Close the Capture frame, adjust image window size, position to your liking (alt+enter toggles fullscreen - doubleclicking the image usually locks everything up).
Simple eh? Worth it? Your decision. Not quite DScaler, but close.
Channel selection by keyboard is only next/previous (and opposite that of MSIPVS). Channel jumps can only be done by the filter. (Right click on image if you are in full screen (and if you are simply watching TV, you can drag the filter window down and offscreen).
And there are all sorts of weirdness - you never know what settings will "stick" from one time to the next. Haven't been successful in getting it to record, and after playing around with some other recording programs, I now have this echo (or even echo/echo) sound (I have to TURN OFF the line input to the sound card to get rid of it, yet the line input volume slider still has effect).
It's a great time waster.

What are the ideal specs for a DigiBeta master tape when authoring a "widescreen anamorphic" 16:9 SD DVD (original aspect ratio is 14:9)?

I just received the masters for a new SD DVD. I would like to author a "widescreen anamorphic" SD DVD horizontally squeezed widescreen image stored in a standard 4:3 aspect ratio DVD image frame. (On 4:3 displays, mattes should preserve the original aspect ratio. On 16:9 displays the image will fill the screen at the highest possible resolution.)
Below I've listed the specs of the Digi Beta master tapes the producers have sent to me for digitizing. I'd like to know this: What are the ideal specs for a DigiBeta master tape when authoring a widescreen anamorphic SD DVD, using material with an original aspect ratio of 14:9?
I've also listed my guesses below. Please let me know if my guesses are right. If not, please suggest alternatives (and if possible explain why.)
TECHNICAL SPECIFICATIONS OF EXISTING MASTER:
Tape: DigiBeta
Original Aspect Ratio: 1.55 (14:9)
Vid Rate: 29.97 fps
Pixel Aspect: NTSC - CCIR 601
Frame Size: 720 x 480
Anamorphic: Full-Height Anamorphic (16:9 image displayed in letterboxed, non-distored 4:3)
Display Format: 4:3 Letterbox
MY GUESS AT IDEAL TECHNICAL SPECIFICATIONS (for a DigiBeta, that is):
Tape: DigiBeta
Original Aspect Ratio: 1.55 (14:9)
Vid Rate: 29.97 fps
Pixel Aspect: Square
Frame Size: 720 x 540
Anamorphic: YES
Display Format: 16:9 Anamorphic (horizontally squeezed widescreen image)
Please feel free to ask for clarification or further information you need to answer my question.
Thank you so much in advance for your help!
Best, Noetical.
BTW, I can't wait for the day when everything has gone digital and we get digital intermediates instead of tapes to digitize!

Hi Nick...thanks for taking the time to reply to my question.
Nick Holmes wrote:
What you have there is a mess.
NTSC pixels are never square.
NTSC is 720x486, even when it is Anamorphic.
You shouldn't be using an already letterboxed master to make an Anamorphic version. Get the master that was made before the letterboxing stage.
When you make an Anamorphic DVD it should display as 16:9 full screen automatically on widescreen TVs.
The same DVD will automatically letterbox on 4:3 TVs.
Um yeah...duh. That's exactly what I was trying to explain in the preface of my question. I'm sorry if I didn't make it clear...all these things you mention are the reasons I'm putting together a list of the technical specs of the DigiBeta I need so I can have them send that instead of the stupid letterboxed version.
Look, I'm sending this request to some intern at their offices in England, asking for a master with which I can make an Anamorphic DVD. They already sent me this master, which as you and I both agree is an idiotic asset to use for these purposes. As such, I was hoping for advice on a more precise way of requesting the master that I need than asking for "the master that was made before the letterboxing stage." Upon reflection, perhaps I'll just do that. If you or anyone else has a suggestion about something I should add to my request that would improve the odds of them sending the tape I need, please repond. Thank you!
BTW, It's been a long time since anyone has responded to something I've written or said as though I'm an idiot. I remember now that I don't really like it. (Moving along...)

How should I tag content created in a master page when addressing accessibility before exporting to Acrobat? I can't add the content to the articles pannel because it's locked. I would also like to know how I shold tag my cove content. I dont' want rea

How should I tag content created in a master page when addressing accessibility before exporting to Acrobat? I can't add the content to the articles panel because it's locked. I would also like to know how I should tag my cove content. I don't want the reader to get lost in content other than the body of the report, but I also don't want to ignore some content completely by tagging it as artifacts. What should I do y'all?
Thanks,
Josh

Hi Rob,
From the screen shots it looks like your script is not formatted properly (you may refer to 'Paladin Script' in 'Sample Project' to get an idea of how the script should be formatted.).
Further please follow the steps mentioned below to use Story to PP workflow.
Create a new Film script in Adobe Story
Create scene heading – INT. LOCATION – Day (these will show up in the outline view panel on left hand side)
Hit enter, hit TAB
Enter the name of the speaker, hit TAB or ENTER
Copy over the transcribed text
Build your script this way
Number scenes from the production menu
Export ASTX file for your script : File->Export->.astx
Open Premiere Pro
Create a new project, bring in media
In the project pane, find the "Scene" column
For the clip that contains the spoken text, assign the same scene number to the clip as you have in the story script (lets say both are scene 1)
Click out of the scene box in the project panel in Ppro
Right click on the scene that you just assigned a scene number to and select – attach Story script
Select the .astx fle you exported in step 8
Click ok
You should now see the script data in the metadata panel for the clip in the metadata panel.
You can now run speech to text based on "Embedded Script metadata" to time align spoken word to the script.
Let us know if this is helpful.
Thanks
Rashi - Story Team

Is it have some User exits for Vendor master trigger when click some field

Dear Experts,
I would like to know Is it have User exit for Vendor master trigger when click some field in Vendor master? not just User exit for Prior Save . Please kindly let me know some solution for this case.
Many thank.

Hi,
check may this bapi will be useful your requirements, BAPI_VENDOR_CREATE
below links may helpful for you:
BADI http://help.sap.com/saphelp_erp2005/helpdata/en/73/7e7941601b1d09e10000000a155106/frameset.htm http://support.sas.com/rnd/papers/sugi30/SAP.ppt http://www.sts.tu-harburg.de/teaching/sap_r3/ABAP4/abapindx.htm http://members.aol.com/_ht_a/skarkada/sap/ http://www.ct-software.com/reportpool_frame.htm http://www.saphelp.com/SAP_Technical.htm http://www.kabai.com/abaps/q.htm http://www.guidancetech.com/people/holland/sap/abap/ http://www.planetsap.com/download_abap_programs.htm http://help.sap.com/saphelp_nw04/helpdata/en/c8/1975cc43b111d1896f0000e8322d00/content.htm /people/thomas.weiss/blog/2006/04/03/how-to-define-a-new-badi-within-the-enhancement-framework--part-3-of-the-series /people/thomas.weiss/blog/2006/04/18/how-to-implement-a-badi-and-how-to-use-a-filter--part-4-of-the-series-on-the-new-enhancement-framework http://esnips.com/doc/e06e4171-29df-462f-b857-54fac19a9d8e/ppt-on-badis.ppt http://esnips.com/doc/43a58f51-5d92-4213-913a-de05e9faac0d/Business-Addin.doc http://esnips.com/doc/10016c34-55a7-4b13-8f5f-bf720422d265/BADIs.pdf http://esnips.com/doc/1e10392e-64d8-4181-b2a5-5f04d8f87839/badi.doc http://esnips.com/doc/365d4c4d-9fcb-4189-85fd-866b7bf25257/customer-exits--badi.zip http://esnips.com/doc/3b7bbc09-c095-45a0-9e89-91f2f86ee8e9/BADI-Introduction.ppt http://help.sap.com//saphelp_470/helpdata/EN/eb/3e7cee940e11d295df0000e82de14a/frameset.htm USER EXIT http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm http://www.sapgenie.com/abap/code/abap26.htm http://www.sap-img.com/abap/what-is-user-exits.htm http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction http://www.easymarketplace.de/userexit.php http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm http://www.sappoint.com/abap/userexit.pdfUser-Exit http://www.sap-img.com/ab038.htm http://help.sap.com/saphelp_46c/helpdata/en/64/72369adc56d11195100060b03c6b76/frameset.htm http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm http://www.sap-img.com/abap/what-is-user-exits.htm http://expertanswercenter.techtarget.com/eac/knowledgebaseAnswer/0,295199,sid63_gci982756,00.html Rewards if useful......... Minal
still if you not find any solution go for custom exit, means in standard program only ABAP consultant change the program where you required, it is little risk, you have to do the more testing for this
BR:
Venkat.Gurram

Can't delete master record when matching when matching detail record exist

Hi
on the rel. property:
Delete Record Behaviour = cascading
Prevent masterless Operation =yes
Automatic Query = yesCan't delete Record Master & Detail...
On delete getting error msg.
Can't delete master record when matching when matching detail record exist
am i missing something...!
Regards,
Abdetu...

First of all, remember the ripple affect of cascading deletes and updates.
Oracle database allows creating master/detail relationship between tables using foreign keys and allows cascading deletes by defining the FOREIGN KEY constraint with ON DELETE CASCADE clause.
Oracle Forms on the other hand, handle cascade delete thing internally when you set the relation properties.
Now if you have 3 tables with MASTER->DETAIL1->DETAIL2 relationship and you have a form defined with MASTER->DETAIL1 relationship only, it won't let you delete (and save) master or detail record since the third table (DETAIL2) is referencing the rows from DETAIL1 which you are trying to delete.
If DETAIL2 were present on the form, it would have deleted with relation property CASCADING. If you really want that when you delete a master record, all its details should be deleted too, then consider defining FOREIGN KEY constraints with ON DELETE CASCADE and on the form set relation property CASCADING.
And if all master/detail tables are on your form and still it is not allowing you to delete master with cascading, there must be some code preventing it. Check triggers like ON-DELETE, KEY-COMMIT etc what they are doing.

How to stop the prompting message of master password when I open firefox when not opening on a site that doesn't use a password?

Every time I open Firefox it asks for my Master Password. I am not on a site that has a saved password, yet it still asks for it. Sure I can hit Cancel, but continually doing so is a nuisance. It never used to do this in past versions, it only asked for the master password when entering a site with a saved password. Is this a bug? How can I stop this annoying behavior. If needed my Start Page is: www.webcrawler.com.

Sync will try to connect to the Sync server to look for changes, from other devices that are setup for that account, shortly after Firefox is opened if anything is set to be synchronized, not just tabs. You need to disable Sync from "auto connecting" to Sync, disabling the sync of tabs alone isn't enough.
http://kb.mozillazine.org/About:config <br />
Double-click this pref to toggle it, then restart Firefox. <br />
'''services.sync.autoconnect''' to '''false'''
Then grab the Sync icon from the Customize Palette and use that to do a manual sync.

Why does Adobe continue to sell Master cs6 when its discontinued?

Why does Adobe continue to sell Master cs6 when they discontinued the suites and released Creative Cloud CC?

CS6 is not discontinued it is the last perpetual version of Adobe products and is still being marketed. Adobe prefers you to join the cloud. However Adobe knows many intelligent customers will not be joining their cloud.

HT6129 I am trying to connect my itunes account with disney anywhere app but when i click connect to itunes from disney app and am redirecting to itunes store, nothing happens

I am trying to connect my itunes account with disney anywhere app but when i click connect to itunes from disney app and am redirecting to itunes store, nothing happens

What happens when you click the "Download" button for Mountain Lion? Do you get any response (error messages, etc.) from the Mac App Store?
Clinton

I bought an iPhone at september 2011 but it has been replaced twice, and the last time it was replaced was on February 2012... My question is till when is my warranty activated ???

I bought an iPhone at september 2011 but it has been replaced twice, and the last time it was replaced was on February 2012... My question is till when is my warranty activated ???

Your 1 year warranty starts the date of purchase of the original device. If the device is replaced that original warranty stays the same on the new device. Each replacement does come with a 90 day warranty. So if you're out of that original 1 year warranty... you will be covered for atleast 90 days on your replacement device.

Tv anywhere master... till when?...

Similar Messages

Maybe you are looking for