TV as Macbook Pro monitor video quality

Hi there,
Hoping for some advice here. I've been using an Apple mini displayport to HDMI cable to use my tv as a monitor for my Macbook Pro when streaming online video. It's hard to describe, but the video doesn't look as smooth on the TV as it does on the MBP itself - almost as though the frame rate is different - (like I say it's to describe). On my TV, the default 'PC input' is VGA rather than the HDMI, so would I notice any difference or improvement if I was to use the VGA input instead?
Thanks.

Look in System Preferences ➜ Displays ➜ Arrangement.  Is display mirroring turned on?  If so, turn it off as the TV will then only be displaying at the same resolution as your 13" MBP and not utilising the full 1920x1080 resolution that it's capable of.

Similar Messages

  • I just bought an Epson Stylus Pro 3880 and the printed images look yellow. I calibrate my MacBook Pro monitor with a ColorMunki Display. I want to make sure my Lightroom print settings are correct.

    I just bought an Epson Stylus Pro 3880 and the printed images look yellow. I calibrate my MacBook Pro monitor with a ColorMunki Display. I want to make sure my Lightroom print settings are correct.

    This what I have been trying......  Maybe my eyes are screwed up or don't understand the process....
    What I have been trying to do is squint and make the apple disappear by moving the sliders around in each step. Is that correct?

  • Which Macbook Pro for Video Editing

    I'd like to buy a macbook pro for video editing on the go and with all the available features, I can't tell which is best.
    I use final cut pro 7 and all footage is HD.
    RAM?
    7200rpm vs. 5400 ?
    DUAL CORE vs. QUAD
    INTEL GRAPHICS?
    RETINA?
    It's all very confusing, especially since I haven't looked into buying another mac since I purchased an iMac in '07 (which still rocks).

    - Get either a 7200 or SSD internal drive
    *You'll need an external hard drive that runs at least 7200rpm for your media (scratch disk)
    - If you can affor it, go with a Quad Core
    - For graphics, I believe all the new MacBook Pros come with Intel HD Graphics 4000
    - As for CPU speed and RAM, they really go hand in hand with video editing.
    - CPU speed doesn't help if you do not have sufficient RAM cover all of needed video/audio/effect editing and rendering processes.
    - Slower CPU with more RAM means that procesess get covered by the additonal RAM, but will take longer to render and preview during editing.
    *So when choosing CPU and RAM, do not sacrifice one for the other.
    You can always upgrade RAM later if you can't afford it now.
    - Retina? Doesn't make much of a difference for you. You're not editing 4k video so chose what you like better, or   can afford.
    Here a post that goes over some basics

  • What is the best macbook pro for video editing dslr footage?

    what is the best macbook pro for video editing dslr footage?

    It is the GPU that is important.  All the CPU's will be fast enough.  If you can affords it, the 15" with the NVIDIA GPU is the best.
    Ciao.

  • MacBook Pro missing video adaptor

    Hi,
    I have a MacBook Pro (Uniboby). I need to use it on a theater show with a video projector that will be 15 meters away.
    The projector has S-vidéo, Dsub15 ou RCA inputs.
    What is the best solution knowing Apple does not have a direct to RCA adaptor.
    The video is standard PAL (720x572).
    - Mini DisplayPort to VGA then VGA to RCA adaptor
    - Mini DisplayPort to DVI then DVI to video Apple (2 Apple adaptors)
    Better solutions? Thank you.

    Hi Rod,
    You got it right
    I have access (it is not mine) to a video projector + cable.
    The projector will be installed on a lights structure inside a theater.
    The cable will a be +/- 15 metres long.
    The basic question was: how to make it work with a MBP 2009?
    It turns out that a good composite cable is OK (I was worried about signal quality at the end).
    So I don't have to find a VGA cable...
    Finally, it is pretty simple Thank you -Yves.
    Message was edited by: ygab

  • I currently use a Samsung TV with an Apple TV to duplicate my MacBook Pro monitor.  How can I use this system as a extended (not mirror) monitor?

    Does anyone have a solution that allows me to use a Samsung TV connected via the AppleTV to my MacBook Pro as an extended (not mirror) monitor? 
    Thanks.

    I would recommend upgrading your laptop. Does your current laptop have an HDMI port? If so, connect your Mac to your TV with an HDMI cable. Your TV must be compatible, if it is, you will have to understand that it will be no where near the quality of AirPlay.

  • 2011 Macbook Pro Overheating *VIDEO*

    Well, I must say that I am really disappointed with the current 2011 Macbook pro lineup. This was my first Mac, I must say that I was really excited to finally own one. As I started using it, I noticed how hot the laptop was getting and how loud the fans were. While I was typing a simple E-mail, my palms were getting really hot and was a very uncomfortable feeling. I've been around friends who have own previous models and all have been very quiet and also fairly cool.
    I started to get curious so I started reading the temps and it was a staggering 90c degrees! This was just while web browsing, having iTunes loaded and just doing normal day to day stuff. I immediately went online and did a Google search for "2011 Macbook Pro Overheating". I come to find out that it is a common problem. What was most disappointing to me was the fact that Apple is fully aware of this problem and has disabled Turbo Boost on the 13.3" Core i7 while running Bootcamp. So technically speaking, your better off buying the Core i5 model as it will run faster.
    I decided to return the laptop, I feel it's deceiving to buy a product that really doesn't perform at it's full potential (It's like buying a Ferrari and only be able to go 60MPH). My batter life was also terrible, I was lucky if I got 3.5 hours under normal web browsing. I think this had a lot to do with the fact that the fan kept spinning at full speed every 2 minutes.
    I hope this post doesn't come off as a flame, but rather constructive criticism on Apple's design to improve their products. I truly believe that Apple needs to redesign their Macbook Pro lineup to accept modern processors that run a lot hotter compared to when the Macbook Pro was first introduced. The fact that it has no ventilation in the bottom like every computer out there poses a huge problem with newer processors. I understand the aesthetics portion of the design, but I would much rather have a few small vent holes to keep the processor running cool and maintain a longer life for the hardware.
    Lastly, before anyone say's that I got a "defective" one I want to say that this was my 2nd 2011 Macbook Pro as the first one was returned due to the same problems. Here is my video of my experience - http://www.youtube.com/watch?v=6_azMBStJnY

    I am having a similar problem. Bought MacBook Pro 17" 16 months ago and after about 9 months, routinely, daily, but no particular time I got a black screen suddenly.
    (This is running Windows 7 all the time.)
    So daily it has been doing this except for a 3 week visit to Europe ... weird.  Yet while in Europe no change in usage. Software or hardware. Except that in US I have it plugged often into a bigger monitor. And sometimes have lid closed but not for the past month while being back.
    Return to US and within 2 weeks, suddenly black screen of death anytime during the day, keyboard in use or not.
    Called Apple finally yesterday ... they need to know if it happens under Apple IOS.  No idea.  So for 1 1/2 days ran Apple and did nothing!  No black screen.
    But what I have noticed is that when it does go black the bodyis HOT!!!  Especially between the screen hinge and F keys to the left. 
    Today I did two more things ... installed gotomypc to see if when it goes black if the laptop is functional, just dead video.  I will try to remote in when it goes "dead".
    Also I put a load of coins on the laptop where it gets hot to absorb the heat and do they ever!
    One thing ... the first time I ever saw this black screen symptom it RECOVERD after 3-4 seconds and gave off an error message like
    “Display driver stopped responding and has recovered” error.
    So based on researching this, it sounds like the video card needs replacing OR a driver update OR a bath in cold water?

  • Best MacBook Pro for video editing

    Any suggestions - I would like to purchase a MacBook Pro but I want to some video editing with it -which is the one to look at?  Thanks

    The best one is the model without the word "Book" in it... 
    You don't say what you want to edit, but in general, editing is a horsepower game so you'll want a lot of RAM, a fast system disk/SSD and the fastest processors and video board available. Don't expect to do much on the battery because all those resources (plus your external media drives) will severely limit your battery life.
    You may also want an external monitor and plan on either USB 3.0 or Thunderbolt external drives for media and scratch storage. The bigger, the better.
    Hope this helps

  • Macbook pro monitor flickers and audio interference

    Hi there,
    I've noticed some strange behavior with my macbook pro lately.  Occasionally the monitor will flicker just once really quickly. It will flicker between black and the regular screen.  Maybe it happens about twice a day.  When I'm surfing, I noticed some interference with the music that is playing in Itunes.  For example, if I click on a link in Google Chrome, the audio signal from whatever is playing in Itunes will get cut for a split second. It's almost like the processor is working too hard to manage both surfing in Chrome and the music playing in Itunes, which is ridiculous.  When I bought my computer (2008 or 2009 model), I upped the RAM to 4gb. My processor is 2.4 ghz.  I have no idea what's going on.  Is it a hard drive problem? Hope you can help.
    Thanks!

    Do you have access to an Apple Store? If so, it may be worth making an appointment at the genius bar and having them run the test for the NVIDIA problem. Since your replacement logic board still has the NVIDIA GeForce 8600 M GT video chip, it could be starting to happen to your replacement logic board.
    I also agree with all of CMCSK's suggestions. Freezing is often associated with hard drive problems. You might also want to run SMART Utility:
    http://www.apple.com/downloads/macosx/systemdiskutilities/smartutility.html
    You can download the demo and run it several times for free. It will give you a very comprehensive view of the physical health of your hard drive. If you still have the original one from 2007, it's getting pretty long in the tooth and may be approaching the end of its average useful life of 3-5 years. I just recently had to replace my original 2007 Fujitsu drive.
    If your drive is headed south, and is also too small, it may be time to upgrade to a larger and faster drive.
    The software update probably didn't cause the problems, but it may have exposed problems that were already in existence.
    Good luck!

  • Macbook Pro to video components?

    I have a macbook pro and I want to hook it up to component video(yellow).  I bought the Apple Mini-dvi To Video Adapter but I know thats the wrong adapter and I already have the Mini DisplayPort to DVI Adapter. I also read somewhere that my computer wont support analog so I would need to get a convertor???  I have the audio figured out as thats easy but the video is killing me.  If anybody has the easy answer please let me know what I need to get and do to make this happen.
    I also thought I may be able to get a DVI to RCA adapter but I was told that wouldn't work either.
    Thanks

    I just want to use it to watch netflix on a larger screen.
    Here is the info...
    Model Name:          MacBook Pro
      Model Identifier:          MacBookPro5,5
      Processor Name:          Intel Core 2 Duo
      Processor Speed:          2.26 GHz
      Number Of Processors:          1
      Total Number Of Cores:          2
      L2 Cache:          3 MB
      Memory:          4 GB
      Bus Speed:          1.07 GHz
      Boot ROM Version:          MBP55.00AC.B03
      SMC Version (system):          1.47f2
      Serial Number (system):          W8******66H
      Hardware UUID:          98EC3365-2321-56D7-89E8-F5FF66C095E4
    I think thats what you were asking for.
    Thanks again.
    <Serial Number Edited by Host>

  • New macbook pro to video

    I need to know if the Apple mini- DVI to video adapter works for the macbook pro late 2008-2009 or what kind of adapter do i need to connect by composite video and s-video???
    Please help me!

    If you have a silver unibody mbp (I bought mine in 12/08) you need a mini DisplayPort to VGA/DVI/etc. adapter. afaik mini DisplayPort is something Apple made up, it is not a standard and the cables are only available from Apple store. It is not the same as mini-DVI. Even non-Apple store outlets like Best Buy don't have the cables yet.
    If you need to go to composite/SVideo, you will need another adapter if there is no direct adapter.
    fwiw I am using a mini DisplayPort to VGA cable right now and it works great. I have read about flashing display issues but have not experienced same....yet.
    http://discussions.apple.com/thread.jspa?messageID=8375980

  • Late 2007 MacBook Pro S-Video adapter no output.

    I've troubleshooted everything I can, so hopefully one of you can help me!
    My Fiancé's mom has a late 2007 MacBook Pro running Mountain Lion. She has an older tv, so I was wanting to mirror the display so she can watch Netflix on her TV.
    After digging around on the Internet, other users said the APPLE M9267G/A adapter solved this problem without the need for a converter box, or upscaler. Needless to say, it doesn't work..
    I've tested the cable, port on the computer, and they both work. I've tried running just the yellow Composite video out instead of the S video through the video in on the TV, and a VCR... Nothing.
    I used my old Powerbook 1.67, which has an S Video out to the TV, and it works perfect. When I plug the adapter into the Powerbook's Dual Link DVI port, same port as the MacBook Pro, it doesn't work..
    I chose S-Video, even though the TV has Component inputs, because other forums said it wouldn't work without an expensive converter box.
    They said this would be the solution.
    Does anyone have any suggestions?
    Thanks!

    Same problem, though with an early-2008 MBP. Things worked fine with 10.6.x and as soon as I went to 10.9 the external display stopped working.
    The first time I plug in the adaptor (whether or not there is a video cable attached) the screen goes black and nothing shows up on the external screen. When I unplug the adaptor, I get the display back on the MBP but it's at low resolution and it has put me at the general login screen. When I put the adaptor back in the second time, it essentially locks up the display to where it is black and no key presses or adaptor removals brings the display back. I have to reset the MBP by holding down the power button. I submitted a bug report too, but have no faith Apple will do anything. Big fail, Apple.

  • Macbook Pro Flash videos will not load on any browser?

    On my macbook pro all of a sudden all flash based videos such as youtube will not load and freeze before they are loaded. IT does not work on safari, chrome, or firefox. have uninstalled and reinstalled flash. Used Disk utility. Empted cache. Any idea what is wrong? This problem just started this week. Internet connection is good.

    Uninstall Flash
    Download OnyX and run all the checks, maintaince and cleaning aspects and reboot at the end.
    http://www.titanium.free.fr/
    Reinstall Flash
    http://get.adobe.com/flashplayer/
    If that doesn't work, create a new user, log into it and see if your issues continue.

  • Detect displays seems to have quit working? The secondary monitor is bleeding into the MacBook Pro monitor. How can I fix this?

    I am using a MacBook Pro 2009, Snow Leopard (OSX 10.6.8). All of a sudden last night after a long day of work, my monitor resolution changed without warning and the secondary monitor display started bleeding into my laptop monitor. When I go to detect displays, it doesn't fix the problem. It looks like I need to switch to a larger display setting and the largest setting has disappeared.(The display seems to default to this setting where my screen bleeds into the laptop monitor.) When this started happening last night, I immediately shutdown and restarted to see if this would fix the problem. So far, it's still not looking too good.
    I also tried shutting the laptop and using the external monitor only. When I do this, the monitor freaks out and keeps flashing on long enough for me to input a password. Then it flashes off, the computer and dipslay goes to sleep and I have to re enter my password to exit sleep mode and the process starts all over again.
    Here are screen shots of the two monitors side by side:
    http://danisco.files.wordpress.com/2013/07/monitors.png
    (Notice the weird overlap - it's not keeping me from working, but it's super annoying!)
    Any ideas on how I can try and fix this? OR do I need to get help from Apple directly. Thank you in advance for any suggestions on this!

    Okay - this issue seems to have resolved on it's own. Yea!
    I did find a thread that suggested resetting the PRAM/NVRAM so I did this, restored the external monitor to factory settings and went into Disk Utility and repaired disk permissions and verified disk permissions.
    Here is a link to reset the PRAM/NVRAM: http://support.apple.com/kb/HT1379
    These things may have helped resolve this issue. I can't tell what worked because it was hours after I did all these things that my monitor and computer decided they liked each other again. If you have a similar issue, maybe these steps will help you resolve your problem too.
    Hope this is helpful!

  • How do I connect my defunct MacBook Pro (monitor's dead, HD works fine) to another computer to transfer files?

    I have an old MacBook Pro whose monitor recently died. I took it to the genius bar to get assessed and ended up buying a MacBook Air to replace it. The genius hooked up my external hard drive to the MacBook Pro and did something with the way she started up the MacBook Pro so that I could get my files off of it and onto the external hard drive while it was plugged into another computer so I could see the files there. However, I failed to transfer some files that I really want. Now I'm trying to figure out how to transfer them on my own. And I can't make it work.
    Here's what I have to work with:
    - The monitor-less MacBook Pro, which still turns on.
    - The new MacBook Air.
    - The external hard drive, which I connect to the old MacBook Pro via 6-pin FireWire and the new MacBook Air via a thurnderbolt-to-9-pin-FireWire-to-6-pinFireWire converter.
    Would love to hear your ideas so I can avoid another genius bar appointment if possible (as they take forever).

    "Target Disk Mode"
    FireWire or ThunderBolt, whichever you can make work in common.
    OS X Mountain Lion: Transfer files between two computers using target disk mode

Maybe you are looking for

  • App-V Office 2013/Office 365?

    Hi, In order to App-v Office 2013, apparently you need Office 365 ProPlus? How to get it, we do have Office 2013 ProPlus but that's not sufficient? Don't get what the difference is actually. Note: we don't want to use  Office 2013 click-n-run. J. Jan

  • Error while uploading R/3 Derived Role into EP

    Dear all, When i was trying to upload the derived role from backend R/3 system. It's giving following error. com.sap.portal.pcd.rolemigration.RoleMigrationException: Nested Exception. Failure to execute native function. Nested Exception. ROLE_IS_DERI

  • Bigger/Less albums in the line?

    Hello, so this might be a stupid question, but is it possible to change how many albums there are in the line? Right now I have about 7 in one line, and the album covers are annoyingly small. I'm pretty positive that the album art has been bigger, an

  • Define Ledgers for General Ledger Accounting in sap 4.6

    hi am a student in sap, and am trying to configure my system for the best practices guide, however the guide is of ecc 6.0 and my system is 4.6, and have got stuck with the configuration so could u pleas help me find the path to Define Define Ledgers

  • Itune doesn't recognize ipod shuffle

    Itune doesn't recognize my ipod shuffle(first generation). please help me!