Tv as monitor, no picture (not supported)

My hubby decided to get the picture size to fit screen. In the process he changed something that is not supported(black screen) for his monitor (tv). We get HP symbol and then a little box "not supported"with black screen. How to I change setting back so we can see the screen again. It's a desktop HP Pavilion, using vga.
Thank you for any help, Junia

black screen, can see nothing , but f8 and f2 when turning on comp. Once it gets past HP logo, it goes balck with white words saying not supported. Not sure what he changed.

Similar Messages

External Monitors Dual Displays not supported

External Monitors Dual Displays not supported!
Yikes!
Why do I download BUGGY BETA OS? When will I learn ? DON't DO IT!
(sorry for shouting...)
There are no short cuts, no work arounds, no simple solutions...only updates
Please Apple code monkeys ..tear down this problem.
Thanks.
I feel better already .
--Marconi

Try this: Use the [√]Mirror displays oprions, choose your resolution, then desect the [ ]Mirror displays.
It shouldn't supossed to be like this, but until they send an update, this workarround will work.

DVI to VGA adapter, monitor says "input not supported"

I have just received my MBP yesterday and, when I attempted to attach it via DVI to VGA adapter to my Acer AL2016W flat panel LCD, the monitor told me "input not supported". I was under the impression VGA is VGA is VGA. Perhaps I am mistaken. There is no DVI port on this monitor so I am, essentially, screwed ATM unless I purchase yet another monitor - this one is less than a year old. I require my MBP to be attached to an external monitor due to a disability, and am not sure what to do. I don't believe it to be an isolated issue, especially after viewing some of the other posts about the graphics card being an issue as well. I wish Apple would come forward with a resolution. I realize this issue has probably been posted somewhere already, however I am unable to sift through all the posts due to the aforementioned disability and inability to attach to external monitor. I just can't sit here for that long, so I offer my apologies.

First off, are you connecting in the proper sequence? That is:
1. MBP and monitor powered on
2. connect monitor's VGA cable to the DVI-to-VGA adapter
3. connect DVI-to-VGA adapter to the MBP's DVI port
In that way, the MBP should autodetect the monitor and set the resolution appropriately. Else, the output resolution of the MBP may not suit the monitor, and the monitor will give a "not supported" error.
As a side note, have you considered the options in System Preferences > Universal Access? Options include Zoom, VoiceOver (spoken screen selections), making the cursor larger, and other enhancements for the visually impaired.
Hope this helps...

14 bit-depth picture not supported

I uploaded some 14 bit-depth pictures from my Nikon D800 into Aperture 3.3.2 and I got this message :"Not supported format".
How can I fix this?
I tried with 12 bit-depth pictures and it works.
Does Aperture support a 14 bit-depth ?
If yes, how can I configure this settings ?
If not, how can I downsize my pictures from 14 bit into 12 ?
Thanks in advance.

I always shoot with my D800 in full RAW, 14 bit. I have seen no such behavior. More info, please.
Ernie

Mid 2010 Macbook Pro to a Samsung Tv. (Mode not supported)

Hi, I have a macbook pro mid 2010, when connected to an external tv, i get the mirroring option, however when i uncheck the mirroring option (cause i need 2 desktops screen instead of one), my external monitor shows " Mode not supported ". I have a samsung LCD TV. It works perfectly with mirroring option, but I don't want a mirroring option..... Can anyone help?

I have a MacBook Pro 15 inch early 2011.
The new features available in OS X Yosemite like Continuity, Handoff,etc are not supported in this model.
I did upgrade RAM to avoid any possible slowdown.
I found replacing the HD with SSD is too expensive for a 4 years old model.
Replacing the CPU/GPU is not for amateurs.
If you think that rebuilding a Mac part by part is a viable option, please go ahead and rebuild it.
Best.

Monitor says VIDEO MODE NOT SUPPORTED after changing display settings

HELP! I am about to have a nervous breakdown with my mac mini! I hooked up the mac to my Philips LCD via DVI. No problem at all. But because the screen is only 15" I wanted to play around with the display settings a bit. So I changed the resolution from it's original 1204x768 to the one higher (not sure of numbers) and to my HORROR, I now can't get any picture at all - it says "VIDEO MODE NOT SUPPORTED". I have tried everything I can think of. I have rest the P-RAM, I have unplugged all cables, plugged the back in again, I bought the mac into work and hooked it up to my monitor and changed the resolution back to 1024x768 which is what it was on originally and that STILL didn't work. I can see the Apple logo and then it goes black and comes up with the error message. HELP! What am I doing wrong - I can't believe one click of a mouse button has rendered my display useless!!!

Welcome to Apple Discussions!
Try booting the mini without the display connected, and then, once the system is running, connect the display. This will often force the system to default to a low resolution, and then correctly detect the display when it is connected.
If that doesn't help, with the display connected, boot into safe mode (hold the shift key down when starting up) and once the system is running, change the resolution to 1024x768, and ensure the correct refresh rate is selected. Rebooting normally ought then to give you a good display.
If all else fails, boot into safe mode with the display connected, and then in the Finder's file menu, use the 'find' option to search for 'windowserver' (no quotes). You should get 2 or 3 results, including one with a string of alphanumeric characters. Move all of them to the trash and restart normally.

I have tried to view videos created in premiere elements 10 and I get the following message: "this file type is not supported, or the required codec is not installed. When it opens there is a red screen in the monitor panel with Korean writing which als

I have tried to view videos created in premiere elements 10 and I get the following message: "this file type is not supported, or the required codec is not installed. When it opens there is a red screen in the monitor panel with Korean writing which also appears in the place of each clip in the video. I tried uninstalling and reinstalling premiere elements 10, but that did not have any effect on the video. Do you have any suggestions? I researched codec, but do not understand them at all.

gloucester
In case you did not find it, the following is a copy/paste of the Announcement on Premiere Elements 19/NVIDIA GeForce
that appears at the top of this forum.
Premiere Elements 10 NVIDIA Video Card Driver Roll Back
If you are a Premiere Elements 10 user whose Windows computer uses a NVIDIA GeForce video card and you are experiencing
Premiere Elements 10 display and/or unexplained program behavior, then your first line of troubleshooting needs to be rolling
back the video card driver version instead of assuring that it is up to date.
Since October 2013 to the present, there have been a growing number of reports about display and unexplained workflow
glitches specific to the Premiere Elements 10 user whose Windows computer has a NVIDIA GeForce video card. If this applies
to you, then the “user to user” remedy is to roll back the NVIDIA GeForce video card driver as far as is necessary to get rid of
the problems. The typical driver roll back has gone back as far as March – July 2013 in order to get a working Premiere
Elements 10. Neither NVIDIA nor Adobe has taken any corrective action in this regard to date, and none is expected moving forward.
Since October 2013, the following thread has tried to keep up with the Premiere Elements 10 NVIDIA reports
http://forums.adobe.com/thread/1317675
Older NVIDIA GeForce drivers can be found
http://www.nvidia.com/Download/Find.aspx?lang=en-us
A February 2014 overview of the situation as well as how to use the older NVIDIA GeForce drivers for the driver roll back can be found
http://atr935.blogspot.com/2014/02/pe10-nvidia-video-card-roll-back.html
ATR

HT4644 I'm experiencing a similar problem with an LG Flatron monitor which my MBP no longer recognizes I've tried installing the updates listed above but have not been succesful. Everytime I get a message saying that this software is not supported on my

I'm experiencing a similar problem with an LG Flatron monitor which my MBP no longer recognizes. I've tried installing all the updates listed above but have not been succesful. Everytime I get a message saying that this software is not supported on my system. Can anyone tell me why I can't install the updates?

Hello Philly,
I believe that when you reset your ipod(command given from the computer, right?) touch WHILE the ipod was updating, It cleared the system in the middle of writing files, thus corrupting(equivalent of cutting of in the middle of a sentence) the basic running system.
I suggest you go to an apple store and ask for a technical diagonosis in person. they may offer to help if the problem is fixable. If your ipod is still under warrenty, i would guess it would be free/low cost.
~Remember, I am just giving an educated guess on limited information

Pages 5.0 version does not support pictures in header

I recently installed new soft OS X Maverick and along with this also renewed soft for Numbers, Pages, Keynote, and some more apps.
Pages version 5.0 does not support its earlier version pre-set headers and footers. All the logos (picture files) I had inserted for my company template in the header are gone and I cannot re-enter them either. Does anyone can give e a hint on how to use picture files in Pages version 5.0 templates?
This is first time in 2+ years that I prefer to use MsWord over Pages on my Mac, which is a pity.
*I have tried to get used to new soft versions of numbers and pages now for around 3 weeks but it cannot make me to change my opinion that the eralier versions were much better. Unfortunately with OS X Maverick I have to use new versions for these apps, or do I, any hints?
I already deleted once (2 weeks ago) OS X Maverick and switched back to OS X Mountain Lion (I use TM), but then decided after while to still update the op system soft to newest one available, as I've hoped that developers in Apple will come up with their soft improvements and bug fixes soon enough.
Among the other disomforts (like pages, numbers and changed tag system) Safari is much slower than with previous version.
Any hints are appreciated!
Thanks, Paul

https://discussions.apple.com/message/21546508#21546508 check this out

External video monitor not supported?

I started to use color APP just recent and soon found out that Color does not support live preview to my external video monitor via Firewire, I have 2 devices to choose, DSR11 or a DAC 10 ( DV Converter ), firewire to Component.
I hope that Apple resolve this issue fairly quick, many color users like me that don't have an IO card like AJ Kona or Decklink, color will be useless without an external video monitor for color correction.
Any input will be appreciated.
Sigi

Because of the reduced colorspace required for DV, I'd wager it's unlikely that Color will ever be made to go out via FireWire to a DV deck or DAC.
Decklink Intensity - $249 or $399? is a potential alternative...
Patrick

After my friend locked me out of my iPhone with too many wrong passwords I restored my iPhone and now it is showing that picture of a cable leading towards itunes and itunes says the sim is not supported but it is the original sim. How do I fix this?

After my friend locked me out of my iPhone with too many wrong password attempts I restored my iPhone via recovery mode and now it is showing that picture of a cable leading towards itunes, and itunes says the sim is not supported but it is the original sim. How do I fix this?

Something went wrong with the update, this can and does happen with every version of iOS.
There is nothing wrong with the update.
Simply restore the device via iTunes on the computer.
If iTunes is stating it will take hours to update, that indicates an extremely slow Internet connection and is likely the reason the OTA update failed.

My ipod touch 4g will not connect to tv, will not display picture. keep getting a message saying this accessory is not supported by ipod touch, what do ido to make this work and get rid of the message i keep getting?

My ipod touch 4g 5.0.1 will not connect to tv, will not display picture. Also keep getting a message sayin this accesory is not supported with ipod touch. How do i get this to work and stop getting this message? Please help.

- What cable re you using? Digitasl, VGA, composit, componet and who made it?
- TV out only works with apps that support it. It does not morror the iPod's screen
- Have tired another TV or other display?

Image / picture not showing up in source or program monitor

I am working in Premiere Pro CC 2014. I cannot see the footage / images in either the source monitor or the program monitor. I can see the thumbnails in the bins but when I drag to the sequence or into source monitor, the picture does not come up in the monitors. I can see the images in AE and in Premiere Pro CC.
I have reset workspace. I have restarted the computer. It does not matter what the file format is.
Thoughts? Thanks.

Hey!
Have you tried changing the Video Renderer? If not, go to File > Project settings > General and change the Video Renderer to Mercury Playback Engine software only. Click OK and select "Delete Previews".
Hope this helps..
Rameez

Digital Picture Frame- Some images are saying "Not Support"

Hello there, I recently purchased the Digital Picture Frame (DPF 10") for a gift. As I was setting it up by placing some photos on it with my USB drive. Some of the photos worked, while the others had a black screen that said "Not Support". I read some past forums on this issue, but it doesn't aid me. I was wondering if it is the size of the photo, the format of the photo, or even my laptop since its been holding these photos. Please and thank you.

i,
Please put the USB stick to you laptop and check them to see which format they are ? Many picture frames only support one or two formats.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

My iphone4 is stuck on DFU (itunes logo usb picture on my screen). When I plug it into iTunes it says sim card is not supported. It is an unlocked phone..what do I do to fix this?!

I have tried absolutely everything and don't know what to do!!

The phone is unlocked with a gevey sim that goes into the sim tray with the sim card. But the phone is not jailbroken at all. What happened is I plugged it into itunes and it was working fine until I hit restore. It went through the restore process but once my phone reloaded all that comes up on the screen is the itunes logo and the usb picture plus the option to make an emergency call. When I plug it into itunes it gives me the "sim card is not supported" message. I've tried everything to fix this..PLEASE help!

Tv as monitor, no picture (not supported)

Similar Messages

Maybe you are looking for