TV Connectivity for Creative Zen Vision M 6

Hi all,?I'm trying to buy a new mp3 player, with some requisites. I'll use the player at home linked with my receiver as a kind of media center. I know that there's a dock station for the Zen Vision M 60GB. I saw also that there's a remote control (wired and another wireless remote I200). Is it possible to combine the dock and these remote controls to control Zen by the TV monitor? Could I see, for instance, the playlists on the tv monitor, or do I have to first choose the song or playlist in the Zen?If not, is there another company that makes something like that?I saw that the Ipod has something like that, because I have?a Denon receiver and Denon has a dock that allows al Ipod to be controlled in the tv monitor and the receiver remote control. Thanks a lot!!?RegardsAlexandre

try this it should have all the downloads you need. http://us.creative.com/support/downl...ype=0&x=27&y=0

Similar Messages

  • Where I can find free drivers for Creative Zen Vision

    I've lost my Creative Zen Vision:M drivers, so I can't share with my friends my music, videos and photos. Do you know where I can find these free drivers for Zen Vision:M?

    I've downloaded Creative ZEN Vision:M 30 GB Firmware .62.02e and it says to me "Your player is not connected, please connect your player". I've connected my Creative Zen Vision:M with PC and it always says to me "Your player is not connected, please connect your player". What I must do now Thanks.

  • What type of hard drive do I need for a Creative Zen Vision

    Hey everybody.
    I have a Creative Zen Vision:M, and unfortunately after dropping it, the hard drive has decided to pack up!
    I have decied to replace the hard dri've, but wondered which hard dri'ves are compatible with the Zen Vision:M? I know the hard drive is a .8" drive, but that's all I know what to look for so far...
    Any help would be much appreciated.

    Hi,
    It uses a standard 2.5" HDD. You can find them around in any good computer shop. You can use larger (capacity) as well. If you wish to find exactly the same one please try:
    (a) Open Device Manager,
    (b) Expand Disk drives item
    You can see brand and model of the current HDD on your computer. If it failed already, pull it out and check.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • How to make best videos/audios for Creative Zen/Zen Vision W/Zen Vision M/Z

    4Easysoft Creative Zen Video Converter is an all-in-one Video Converter for Creative Zen software with high output quality and powerful video editing functions, which can help all the zen users to make the best video/audio effect.
    First of all, let’s make clear what kinds of videos/audios can get the best effect in the zen players.
    Video:
    MPEG, WMV, and AVI (MPEG-4 SP, DivX, Xvid), while MPEG-1, and MPEG-2 are supported, but must be transcoded with the included software.
    Audio:
    MP3, AAC, WMA, WAV, and Audible 2, 3, and 4 formats.
    Settings:
    Video resolution: 320×240; Video Bitrate: 500 kbps; Audio Bitrate: between 96 to 128 kbps.
    Then, let me show you how to make a full use of this powerful converter.
    Preparation:Download and install 4Easysoft Creative Zen Video Converter
    http://www.4easysoft.com/guide/creative-zen-video-converter/main.jpg
    Step 1: Run this software and add video/audio files.
    Step 2: Select output video format from the profile drop-down list.
    Click the “Profile” button to select the output video format from the drop-down list button.
    Step 3: Customize output settings.
    Click “Settings” button in the output settings area, you are allowed to customize the output parameters, specify output folder and select output format.
    Step 4: Start conversion
    Click “Start” button on right bottom of the main interface, you can begin the conversion. All the tasks of conversion will be finished at fast speed and high output quality.
    http://www.4easysoft.com/guide/creative-zen-video-converter/steps.jpg
    Tips on editing videos:
    1: Capture your favorite picture.
    Just click the “Snapshot” button to save your favorite image.
    2: Merge videos into one file.
    Just check the “merge into one file” option if you want to merge the selected contents into one file As default the merged file is named after the first selected file (either a title or a chapter)
    3: Select preference
    Click the “Preference” button and a dialog pops up, you can select the output destination, the Snapshot foler, the format of the snapshot image. You can also choose to shut down your computer or do nothing after your conversion. You can also select the CPU usage.
    4: Trim video
    You can get any clip of your video and put it on your zen.
    5: Crop video
    You can crop your video by selecting your video mode, setting crop values, or drag the frame.
    http://www.4easysoft.com/guide/creative-zen-video-converter/tips.jpg
    Ok, just enjoy movies and music with your Creative Zen player now!
    More useful tools:
    MP4 Converter is a powerful MP4 Video Converter which is designed to convert almost any video formats to MPEG-4 standard formats; WMV Converter provides perfect solution to convert common video formats to WMV with the best quality of picture and sound; Apple TV Video Converter is the excellent Apple TV converter software to convert all video files such as AVI, MPEG, WMV, MP4, MOV, RM, ASF, 3GP, VOB, etc, to Apple TV movies.
    Edited by: user11254370 on 2009-6-9 下午11:58

    Just wanted to mention - I bought the IR Remote thinking to make the player useful without navigation keys. Now I feel like I wasted more money instead of shifting to some other player by some other company with better customer service.

  • Creative Zen Vision M 30g wont dock

    Creative Zen Vision M 30g wont dockt Hello,
    Purchased the above player off of ebay, the player works in everyway but will not dock with the computer. I bought this for my son for Christmas because I have one and love it. Mine docks with the computer but his will not. When I try to dock the connection will turn the player on but the docking symbol will not come on.
    I have tried several different connector clips and usb cables and nothing, but all of the same clips and cables work just fine on mine. Also, when I use the wall charger for the player that does work and does charge.
    Any suggestions, and also could for some reason could the connection part at the bottom of the player be damaged in some way?
    Ive tried the reboot suggestion, Ive formated the player and nothing works.
    Sincerely,
    Alan

    Re: Creative Zen Vision M 30g wont dock?
    Darthvader6 wrote:
    Hello,
    Purchased the above player off of ebay, the player works in everyway but will not dock with the computer. I bought this for my son for Christmas because I have one and love it. Mine docks with the computer but his will not. When I try to dock the connection will turn the player on but? the docking symbol will not come on.
    I have tried several different connector clips and usb cables and nothing, but all of the same clips and cables work just fine on mine. Also, when I use the wall charger for the player that does work and does charge.
    Any suggestions, and also could for some reason could the connection part at the bottom of the player be damaged in some way?
    Ive tried the reboot suggestion, Ive formated the player and nothing works.
    Sincerely,
    Alan
    Yes that could be .You may want to return to the seller if you can.Are you using WMP? Try opening Media Player & going to the sync tab to see if that helps it to load the driver for recognition.Formatting the player again could help also. In the past I have had to format more than once for a player to be seen by Windows.

  • Creative Zen Vision M not fully charging

    (Creative Zen Vision M not fully charging( Hi, I recently bought a refurbished ZVM that doesnt seem to charging properly. When I first got it, it hadnt been charged in quite some time so the battery was overdead. My PC couldnt detect it when I connected it via usb and it didnt even start charging at all. I then connected it to a wall charger and it finally started charging. The strange thing is it never fully charges. I've charged it twice now, both times for at least about 2 hours, and the battery doesnt go more than 50%. And when I connect it to my PC to transfer songs, instead of resuming its charge, my battery runs out. Is this a case of a faulty battery? I li've in Australia and I bought it from the USA. I would prefer not to go through the trouble of returning it if I could. Anything I should do like leaving it to charge for an even longer time? Also one more thing I should mention. When I remove the wall charger and plug it back in, it takes the ZVM sometime to detect it, about 30 minutes or so, and start charging again. Any help or suggestions would be greatly appreciated.

    I have the exact same problem. I just mailed mine in for repair today.

  • Creative Zen Vision M (30gb) - Is it the end?

    Hi all,
    I've read a lot of posts and think the only way to find a possible solution to my problem is to just post it....
    I've had my Creative Zen Vision M (30gb) for about?2.5 years, apart from crashing a few times, I've always loved it and would never go near Ipod!
    Lately however it's done something, that it has done before which is to suddenly 'remove' about 2000 tracks, it would go funny, crash and reset a few times, recharge with the plug and it was fine again, the tracks 'reappeared'.
    Now it seems when it happened this recent time, 3000 tracks went and I was left with about 000. So i tried formatting everything cause it just wouldn't rectify itself, then I chose to reload the firmware but everytime I tried to connect it to my laptop it would say my player wasn't connected.
    I have recently baught a new laptop with Windows 7 and even without the software it detects it fine and I think I could just drag music over to it now. BUT - It only has 50mb of memory! Plsu MP3 Recovery Tool and online detection firmware thingy justy doesn't think my player is connected or says cannot update firmware on windows 7?
    So my questions?are - how do i fix it's Is my memory fried, would it be worth getting out the old laptop? Where do i go if i want to repair it's Even if it detects it in XP, the software doesn't detect the player.
    Can anyone shine any light here? Am I forced to buy another Creative product or do I jump ship?

    If the XP computer has WMP installed it may not detect the player (the firmware file) It works best on XP /SP2 WMP0 installed. The issue with WMP is a sticky in the MP3 players forum.

  • HELP!!! Creative Zen Vision M - unresponsive in ANY way...NEED HELP!

    Ok, so this might be a very simple question to answer, but I'm very worried.
    Pretty much, I had been using my Creative Zen Vision M (30 gig) for a long time, but stopped about a year ago. The batteried drained, and I didnt get around to charging it.
    Now, it's been about a year, and I've tried plugging in the Zen into my computers to charge.
    There is NO recognition of the player, no yellow alert, no new device alert, NOTHING.
    The blue light at the top DOES NOT flash
    And My media explorer thinks that it is not connected to the computer.
    I've read a lot about Zens going black, and the blue light keeps flashing, but literally, from the time I plug in the Zen, to when it's sitting on my shelf, I notice no difference. I cannot turn on the player and it wont charge.
    I tried using USB ports in the back, as well as leaving the zen plugged in all day to "Charge". Over 8 hours later, and the player does not budge.
    I do not own an adapter to the Zen, but I tried a 4.5V sony one, and recieved nothing.
    The simple question is:
    After letting the player drain, and die after just under a year of no use, has my player bit the bisquit's
    OR
    Is my battery (or firmware, which unfortunately I have no idea what it is, but it sounds like I can upgrade without having the player turn on) simply taking it's sweet time to recouperate.
    PLEASE LET ME KNOW!!! I am very desperate to get my player working again.

    Leave the player connected to the computer & use a REAR USB port(with the computer on) for 24hrs. Or use a wall charger to charge the battery . It may take a hour for it to just start charging plugged in but once it does let it FULLY charge. That means until it stops blinking the battery icon it full & the player cuts off when done. Now I know Creative wall chargers are not easy to find & they are not cheap. The Sony PSP wallcharger is compatible with the players adapter(plugs into the center hole on the dongle) Also to get it charging after it has been connected for a time hit the Reset? while connected.Not easy but doable with a thin pin.

  • Sick Of This - Creative Zen Vision:M isn't recognized by SO

    Hi everyone,
    My PC doesn't recognice my Creative Zen Vision:M 30GB, it used to show my mp3 player as connected before, but since last week neither my PC nor the Creative Media Explorer can't connect to the player.
    I have reverted the Microsoft Windows Media Player to the v0.
    My SO is XP SP3.
    I already have installed the Creative Media Source.
    I couldn't get into "reboot mode" on my mp3 player 'cause it has run out of battery.
    Thanks in advance.

    Zen Vision M 309Well, I had my zen for going on 3 years...Strangest things is that it will not turn on at all.. I tried all the online documents
    -Resetting it with the USB (nothing plugged in , using the back ports)<-- in which my computer does not recognize the device even if i change to another computer or another USB port; i even purchased another USB cord and same results
    - I bought a wall charger (left it plugged in overnight); nothing i only see the CREATIVE screen that displays, doesn't respond to any buttons I push
    Same two?effects will wall charging/ computer charging
    -When plugged into computer or wall sometimes it will show the CREATIVE screen, or sometimes it will show a blinking light above where the power is...
    I tried also to reset it while it powers on and it doesn't do anything
    When trying to update the firmware, a message says that the device is not connected when it is..
    This is becoming expensi've, and i cannot find my receipt to even get a warranty,,, please help

  • Serious Issues with Creative Zen Vision M 3

    This all started when I was fast forwarding through a track and it freezes. So, I did reset and it's in recovery mode, whereas usually it will just restart again.So I tried turining it on and off and was still stuck in Recovery Mode. Tried plugging it into the computer, the computer doesn't recognize it. I did everything the website told me to, but my computer will not recognize that it is plugged into the usb. When I have it docked it will not let me do anything at all. I tried to clean it up and it stays in "scan disk" for hours,I tried to format it, knowing it would erase everything but hoping it would fix, and when I tried to format it, I got a message saying "harddisk problem", when I rebbot it simply reboots back to Recovery Mode and the other option I have is reload firmware, and it prompts me to start updating firmware, but my computer won't even recognize that it is plugged in , in the first place, so I am at a loss with what to do next. The best help Creative can give me is email support. As most of you probably have found out there is no technical support phone number, only for returns/exchanges. I am using Windows Vista if that makes a difference, which it probably does since nothing seems to work on Winows Vista, and when I look at My computer, it shows that the device is present, but yet I can't access it through any media source or when trying to install this firmware? garbage. Any help would be extremely appreciated. Thank you in advance. Sarah

    That is just crazy, I am so sorry....Mine was bought just this past June, my boyfriend bought it for me because ipods seem to have really negati've reviews when it came to needing repairs and so on... It hasn't even been a year!! I pasted the st and second email below. I can't believe how frustrating this must be for you. I am still extremely annoyed though, it seems like the only option I have now is to send it in , and god knows how much it may cost to fix it. They really do have some customer service issues. They even elude that no matter if I am under warranty or not there is a possibility of "fees" ARGHHH!!!! Most recent email: Dear,Thank you for replying Creative Technical Support.From the description you provided, I can see that there is a "hard disk
    error" in the screen of the ZEN Vision M and the troubleshooting steps
    did not help. I apologize for the inconvenience caused. Please allow me
    to help you.Based on the description of the issue that you have provided, it appears
    that your product needs to be scheduled for a repair or replacement.
    Please note that your product will be tested upon receipt and if no
    malfunction is found in the product, it will be returned to you. Please
    follow this link to have an RMA issued for your product:http://us.creative.com/onlinermaAll applicable fees will be assessed at the time that your RMA is
    processed in an effort to expedite the repair or replacement of your
    product.You might want to browse our online store for accessories for the Zen
    Vision: M. These accessories will definitely enhance your experience,
    and will allow you to get the most of your player. A leather case for
    your Vision:M is a great product to protect it from scratches. http://us.creative.com/products/prod...=&product=4486If you still require assistance, please reply to this email with any
    previous correspondence to ensure the quickest and most accurate
    service. Thank you.Best Regards,<name removed>
    Technical Support
    Creative Labs Americas Original Message Follows:
    ------------------------ I have done all of the things you have told me to do and still no
    change. I cannot get out of recovery mode....and the computer doesnt
    recognize no matter where it is plugged in. It is fully charged, and that
    is the one thing it will do, is charge, otherwise, when it is docked it
    wont let me scroll or select any options. Thank you in advance for any
    help you can give me. Is there a number I can call?
    On Jan 2, 2008 2:43 AM, Creative Americas Customer Support wrote: 1st email:
    Thank you for contacting us at Creative Technical Support; we appreciate
    the opportunity to assist you. I understand you are having issues with your ZEN Vision:M could not be
    recognized by your computer and could not get out of the recovery mode.
    You had also tried formatting and updating the firmware but failed to doso. I'm sorry for the complications you are having with your player.
    Also, I would like to apologize for any inconvenience this issue(s)
    is/are causing you. Let me see what I can do to assist you.Prior to sending this email, our website asked you for some simple and
    easy troubleshooting ste
    ps.
    The steps that I'll be suggesting might be
    the same as what were asked previously, but these will be essential for
    us to resolve your query.With regard to your issue , please try the following troubleshooting
    steps which may help resolve the issue.. Check all connections to make sure that your player is securely
    connected to the PC. If you have already verified your connections, you
    might try using a different USB port preferably one located in the back
    or a different USB Port.2. Try to access the Recovery Mode on your player and run a disk clean
    up you may also try the format option. For more information on how to
    access the recovery mode please visit our Knowledge Base article,Recovery Mode: What to Do and How to Access
    http://us.creative.com/support/kb/ar...p?l=3&sid=47943. If you have tried all the steps above and your Zen, is still not
    being recognized by the system, please refer to our Knowledge Base
    articles:MP3 player not detected
    http://us.creative.com/support/kb/ar...p?l=3&sid=4275USB - General Information and Essential Troubleshooting
    http://us.creative.com/support/kb/ar...p?l=3&sid=2490If the player is now recognized in the Device Manager but not in the
    applications including Windows Media Player, please refer to the
    article.MTP players not recognized
    http://us.creative.com/support/kb/ar...p?l=3&sid=00534. If you have tried all of the steps above, then you will want to go to
    our extensi've Knowledge Base for further troubleshooting ste
    ps.
    Here is
    the link: http://us.creative.com/support/kbIf you are still experiencing the issue, please respond to this thread
    on the outcome of each of the troubleshooting steps suggested and on
    your information on the following:. Does the player works fine by itself (boots up and plays music
    normally)? If no, do you see any error messages on the player's screen?
    2. Does the player works on another Windows XP (with at least Service
    Pack ) computer?I apologize for the issues you are having on your player. In the
    meantime, you may like to take a look at our Zen Aurvana In-Ear
    earphones that is acoustically and ergonomically designed for a superiorlistening experienceThe Creative Zen Aurvana In-Ear Earphones are premium earphones that
    significantly reduce up to 90% of ambient noise. Ergonomically designed,
    the Zen Aurvana In-Ear Earphones completely transforms your listening
    experience. Powered by efficient Balanced Armature drivers, the
    earphones are acoustically tuned for exceptional audio performance.For more information regarding this great accessory for your player,
    kindly check it out on our website at:
    http://us.creative.com/products/prod...7&product=4702
    I hope I have helped address and resolved your concerns. If in any case,
    other complications occur, please do send us a reply with any previous
    correspondence so we can look onto other solutions that can help solve
    this case. Thank you again for contacting Creative Technical Support.Best Regards,<name removed>
    Technical Support
    Creative Labs AmericasOriginal Message Follows:
    ------------------------==================================
    Subject: CLI - Technical Support Request - (ZEN Vision:M)
    Self Description: Intermediate PC User
    Region: Americas
    Country: United States of America Support Inquiry: ID(8) My MP3 player is not detected
    Product: ZEN Vision:M
    CCPP Certificate Number:
    Serial Number:
    Purchase Date: 20/6/2007 Operating System: Windows Vista 32-bit
    Creative Model Number: DVP-HD0003
    Computer Brand/Model:
    Processor/CPU:
    Memory:
    BIOS Type/Revision:
    System Board/Chipset:
    Detailed Problem Description:
    My computer isn't recognizing the player. I can't get out of recovery
    mode. When I try to format it says there is a hard disk error. When I
    try to update the firmware it won't let me because it acn't detect the
    product. When it reboots, it reboots to recovery mode. I can't access
    the main settings or screen. When it is docked it won't let me do
    anything. I tried all the suggestions on the site. The product was 50%
    charged when I was doing all this. It won't let me reload firmware
    either.
    Moderator note: Please remove the name of the advisor before posting up e-mails received from Customer Support.Message Edited by Catherina-CL on 0-22-2008 0:59 PM

  • Creative Zen Vision:M Problen, PLEASE HELP

    I have had my Creative Zen Vision:M for a little over a year now. I has remained my favorite MP3 player by far in comparision to the rest of the competition. The problem I am having is that recently I went to transfer some music onto it after I hadn't done it in a while. I opened up the Creative Zen Vision:M Explorer, and to my dismay it said that the player was not connected. I have tried multiple reconnections with the wire, startup/shutdown many times even uninstalled and reinstalled the software but it always remains having the transfer files etc options faded out regardless of the player being connected or not. The Device manager has it listed without the yellow exclamation point so I know it is recognized by the computer but I am at a total loss for what to do now. Also, I have tried system restore to a time where it was working properly but to no avail it's the same thing. Any advice will be appreciated.

    well im not really scared. but it won't wpork anymore. like everytime i turn it off reset it or reboot it. it would just show the recovery mode and nothign else. that worries me ebcause i can't get it to work as normal agains. =[ so yea. maybe the filmwire thingy would work.

  • Creative Zen Vision M Vista Problem(s

    I have recently purchased a creative zen vision M and its a great player. However I am having problems with vista ultimate 64 bit edition, it seems everytime I connect my player it stalls the player (it locks on the dock screen) meaning I cant access files on the player. I have the lates creative media source , play for sure plugins and the latest firmware (it dident stall before I put the latest firmware on)
    THe player docks fine on my spare Windows XP machine, but it would be nice to have it dock with my primary machine which is sadly vista :P lol
    Any advice/comments ?
    Thanks

    here try this, work for melink

  • Creative Zen Vision M won't power up. Doesn't even show LED lig

    I received a Creative Zen Vision M as a Christmas gift last year. Worked fine for about 3 months, then I started having repeated freezing problems. Fixed those, but eventually the unit just died. No indication of any power. Not even the blinking light. Went to Best Buy where it was purchased, but they could not help. Best Buy tried to find a purchase record, but no luck. After giving up on it for a few months, I thought I'd try again today. I've had it connected by USB for the last 7 hours, but no luck. So what can I do now I like the Creative Zen products (I have had no problems with another Creative MP3 player), and I'd love to get this player working again because I enjoyed watching movies on it in flight.
    Your thoughts would be appreciated.

    This happened to me once, so I purchased a new battery, then left it plugged in for a few hours after that.
    It froze when I started it up, but when I reformatted it, everything worked fine again.
    That may or may not help, sorry.
    Good luck =]

  • Creative Zen Vision:M FM Radio Completely Disappeared!! (Reinstalling firmware doesn't hel

    I turned on my Creative Zen Vision: M, and the FM Radio wasn't there. It just simply disappeared; it's not listed on the Main Menu, nor is it listed as an option from "Configure Menu". This has nothing to do with a new Firmware update that removes the?radio; my player was not connected to?my computer. I have had my player since July of 2006, so it's obviously too late to return it. I've looked around on the forum and many other people have had the same problem, but the only solution has been to reinstall/upgrade the firmware. This doesn't solve the problem. I've tried everything on the recovery menu--formatting, rebooting, cleaning disk, etc, but nothing has worked. I've also contacted Customer Support, but from what I've heard, it's probably not going to help. Has ANYONE been able to solve this problem? It's really frustrating that so many people have this problem and nothing has worked.

    Oh, right, sorry.
    "OS Name: Microsoft Windows XP Home Edition
    Version: 5..2600 Service Pack 2 Build 2600"
    Though currently, I'm installing Windows XP Service Pack 3 via Windows Automatic Updates.
    WMP Version: .0.572.5230
    Should I uninstall WMP entirely to eliminate it as a possible factor?
    (I have Winamp so I don't really need WMP.)
    Are you saying that once I rollback my WMP to WMP0, my computer will be capable of reading my Zen & thus, allowing me to download the firmware and restoring it's previous condition (minus the contents-music, video, pictures, etc.)
    Also, I tried to see if my Zen would try to connect to my laptop - I uninstalled the Zen program on it before connecting it, to see if anything would come up, allowing me to do anything, etc. But no, it just said "My Zen" but I couldn't do anything with that. And then I installed all of the software on the Creative Installation CD. After all of that, apparently my computer acknowledges that a device is connected via USB because it gives me an option as to what to do with it - open it, play it with wmp, explore, etc. The problem though was that the Creative program itself wouldn't acknowledge that it was connected. So I still had the "The player is not connected."
    Just thought this might make a difference -
    I also was looking for some kind of repair shops or sites that would be capable of repairing my Zen - the only thing I came across was http://www.zenrepair.com/Zen/index.jsp - does anyone know anything about this site? If it's reliable, etc. (Just a back up option in case this situation isn't solveable by other Zen peers.)
    Also, thanks again for any help, effort, attempt, etc.

  • Firmware Problem Creative Zen Vision : M 30

    Hello
    I switched my Creative Zen Vision : M 30gb on today to find a firmware problem screen.
    I tried to dock it with my PC but it was not working.
    Tried using the reset button but it doesnt work
    Tried going into recovery mode to reload the firmware but when i try to put the update on its says my player is not connected.
    I tried using the MP3 recovry tool which recognizes my player but then when it tries to install the firmware it says it is not connected.
    The firmware it is trying to put on says it for the 60gb model, would this stop it from reconizing my player?
    It says it for a DVP-HD0004 but on the back of mine it says it is a DVP-HD0003
    Could anyone find the right software because i cant find it's
    Michael

    The first step is to do a cleanup >reboot on the player if that don't work? then while connected uninstall thru Device Manager,reboot computer then plugin to have Windows find & reinstall the player, if that? doesn't work then format,cleanup>reboot player to see if that solves the problem. loosing files is a last resort . Whatever you do DO NOT choose RELOAD FIRMWARE as you don't have recognition from the computer & can not reload it. RELOAD firmware ERASES the firmware making the player useless until it can be reloaded. Link for resue/recovery access on player? http://forums.creative.com/creativel...ap&thread.id=3

Maybe you are looking for