TV episodes disappearing after completion.

Hello,
I'm having a some problems with my AppleTV (first generation).
On Saturday I was transferring about 14 TV episodes from my Mac to my AppleTV. After about two hours I saw the transfer was complete so I shut down the Mac.
But when I sat down to watch one of the episodes on AppleTV it had disappeared. And it was definitely there just before I shutdown the Mac.
It took me two more attempts to get that episode to stay on AppleTV while the Mac was shutdown.
Then after I finished watching the episode on AppleTV, it disappeared. And so has every TV episode I watch. Every time I finish an episode it disappears.
I've also noticed that all episodes that are not marked as "Unwatched" have vanished.
However, the same did not happen with a movie rented on AppleTV. It did disappear and I just manually deleted it.
I've checked and double checked and I can find no settings that that would cause this.
Can anybody help?
Regards.

Your first problem sounds like the TV episodes are not actually syncing to your Apple TV but are being streamed. Thus when you shutdown your computer they disappear. You need to check the sync settings for your Apple TV. In iTunes click on your Apple TV as listed in the devices on the left and then click on the TV Shows tab. Here are the sync settings for TV shows.
Your second problem sounds like you are only listing unwatched shows on your Apple TV. This fact should be displayed above the list of TV shows on your TV screen. You can change this by clicking the left button on the Apple TV remote.

Similar Messages

  • My Trial Illustrator icon disappears after completing installation download

    I am not a tech person, so please bear with me and thanks for any help.
    I have a MAC OS X version 10.4.ll Processor is 800 MHz Power PCG4. My Memory is 1GB SDRAM.
    When I go online to download Illustrator CS4, this is what happens.
    An icon appears on my desktop called ADBEILSTCS4_LS1.dmg. When I click it, the Adobe Illustrator icon appears. Beneath it are three PDF files. When I click onto the Adobe icon, it then hit "Setup". The installer screen checking system profile comes on and is ultimately found to be fine. Then the Loading Set.up screen appears and I check "install" After a few minutes, both bars finish and a message saying "Thanks for installing Adobe Illustrator CS4" appears. When I hit "exit", the AI icon on my desktop disappears.
    I have tried reloading this five times and each time the results are the same.
    If someone could help me, I would greatly appreciate it.
    Many thanks!!!
    Daryl

    Hello Daryl,
    In addition to Ben's suggestion, I will check this link:
    http://docs.info.apple.com/article.html?path=Mac/10.4/en/mh145.html
    I hope this helps you!

  • PR disappears after completing PO

    Hi Seniors,
         After creating PO w.r.f to PR for full quantity, PR disappears. I tried to fetch that in EBAN table, there too it is not showing. If i try to create w.r.f that PR, it is allowing but if i go and check in ME53N and EBAN table, it is not showing.What might be the reason ? Where can i check ? kindly clear me please.
    Regards,
    JanaMM
    Edited by: JanaMM on Jun 11, 2010 11:51 AM

    Hi,
    Once that Full PR qty converted to PO. PR status will set pully ordered.
    after that in ME21N item Overview screen will not appear, only open PR will appear in that selection screen
    SAM

  • Contacts STILL disappearing after complete clean install of everything

    OK, keep a long story short: Old Snow Leopard server + Lion or newer clients resulted in users with network home folders having their contacts deleted over and over and over. There have been a few thread concerning this, and I've gone through hours and hours of troubleshooting from those threads, but nothing resulted in a solution that worked for more than a few hours.
    Now, this year, our school has a completely fresh Mavericks server install on all new hardware. This server is setup to run ONLY File Sharing and Open Directory for networked home folders. We just point each client machine at the Server's IP address on the LAN and bind it to the server as usual. That's all we need and all we want. No other service is running on the server, and never has been. Clients are running Mountain Lion for the most part. Users are completely setup from scratch this year, only Documents, Desktop items etc. have been moved. Nothing from Library folder, just basic files. Local accounts on the bound computers work fine, it's only the accounts (network home folders) which reside on the Server that fail in this way.
    So this is about the most basic networking setup imaginable, and yet *bam* many, many hours into setting up the users and what happens but the freaking contacts start getting deleted again. How can this be happening? What could possibly be wrong? The users are NOT setup to sync contacts to ANY service, period. It's just each user and their own contacts for now. The Contacts app should just be saving contacts to the users's own home folder, leaving them there, and then opening them again. But it isn't; it's deleting them, over and over and over. We wanted to keep it as simple as possible due to the nightmare regarding the Address Book server we used to run on the old Xserve. We have done absolutely nothing strange in our installation; just installed the server and turned on the only two services we need.
    This has just GOT to be some simple little setting somewhere, so any help would be greatly appreciated. (BTW, I did go into Directory Utility on a couple client machines and noticed that in the search path for Contacts it was pointed to default to a Local directory, and then to look for an LDAPv3 directory service. Removing the reference to the LDAPv3 server and restarting the client machine did nothing; the problem occurs just the same either way.
    Thanks for any help you can provide!

    Logs?

  • OS X Mavericks 10.9.4 download disappears from application folder after completion, why?

    Hello!
    When i download os x mavericks 10.9.4 from app store it disappears directly after completion which means that I can't make a usb install of the dmg file?
    Best Regards!
    Nineve87

    Nineve87 wrote:
    ...when i download the full installer it runs directly after the download is complete which means that i don't have enough time to start copying the installation file to another location before it disappears from the application folder...
    Normally, when the installer is downloaded, it opens automatically but then waits for some input from you. That's when you can quit the application and copy it. Since what you describe sounds like the actual installation completes very quickly, something else is happening because the installation can take quite a while, followed by a reboot.
    However, it's been my experience that if there is a version of the installer saved somewhere else on your boot drive, that version will be replaced by what you've downloaded, and since it's not likely you saved it exposed in the Applications folder, the app looks like it disappeared when it's actually gone to another directory. What I do is search on the app name, "Install OS X Mavericks" (I use EasyFind, which is very fast), and when more than one shows up in the list, I look for today's date.

  • Blurb Book in Lightroom 5 on my Mac disappeared after 3 days of work. Where can I find a backed up copy via Time Machine or anywhere else?

    Blurb Book in Lightroom 5 on my Mac disappeared after 3 days of work. Where can I find a backed up copy via Time Machine or anywhere else?

     
    Welcome to the WD Community.
    1) I assume I can  just hook the unit up via USB to my Mac and use iPartiion to reformat the drives, assuming each of the 4T drives will be seen by iPartition as a separate drive. That much seems straighforward.
    Yes, and in case you ipartition dont see the unit properly, you can use the disk utilities on your Mac and you will be able to reformat the unit to make it compatible with your system.
    2) Is my next step to reinstall the WD software and how do I do that? I've downloaded the Drive Utilities and Securities install apps - I assume I just run these with the drive still connected and that's all I need to do?
    Yes, just run the applications.
    3) What about the firmware update for Mac - when should I run that??
    Normally, firmware updates are released to fix any issues that you might encounter on the drive. the latest one was released on 9/24/2014 and it fixed an issue with the drive dropping off of the list after system wakes up from standby mode. 
    5) And what about the "My Book Live Duo Setup" app for Mac - is that for a completely different model? What's the difference between "My Book Live Duo" and "My Book Duo"? It's these little things that I find so confusing. 
    Those are different units. The MBL Duo is a NAS (Network attached system) and the My Book Duo is a DAS (Direct attached system)
    6) Lastly, when I have all the software installed, is that when I follow the procedure described in the Knowledge Base article ID 5724, "How to install a My Book Live or My Book Live Duo on Windows (8, 7, Vista, or XP) or Mac OSX for the first time"? Or is that procedure only for "My Book Live Duo" but not for "My Book Duo"?? 
    That procedure is for the network units, not for your drive.
     

  • Release strategy of contract disappeared after using of  MEMASSCONTRACT

    Hi  All,
    May be some one can help me?
    I have next problem it tr. MEMASSCONTRACT(ECC6)
    Release strategy of contract disappeared after using of tr. MEMASSCONTRACT. I know why it happened, but I don't know how to correct it. Some time ago IN ECC5 we added a field to a table EKKO and used this field as one of characteristics in the release strategy of contracts. In order to transfer value of this field to field CEKKO-USRC1 we used User Exit EXIT_SAPLEBND_002. This User Exit is suitable only for online transactions (ME31K, ME32K). How can I feel field CEKKO-USRC1 in transaction MEMASSCONTRACT?
    Regards, Liza

    Thank you. Probably I didn't explain my problem clearly. It's section of code from User Exit EXIT_SAPLEBND_002:
    ATA: reference(20) TYPE c VALUE '(SAPMM06E)EKKO'.
    DATA: it_ekko TYPE ekko.
    FIELD-SYMBOLS: <ymm_icl> TYPE ANY.
    e_cekko = i_cekko.
    *THE "ICL Contract" FIELD IS ONLY RELEVENT IN THESE TRANSACTIONS
    IF sy-tcode EQ 'ME31K' OR sy-tcode EQ 'ME32K'
    OR sy-tcode EQ 'ME33K' .
      ASSIGN (reference) TO <ymm_icl>.
      it_ekko = <ymm_icl>.
      e_cekko-usrc1 = it_ekko-ymm_icl.
    ENDIF.
    Program SAPMM06E can only be reffered while using online transactions. Mass transactions does not use these program and it is completely class based. So,  may be someone know how can i do the same , but for tr. MASS in ECC6.

  • Badge icon disappears after 2.0 Update

    After installing the Podcasts 2.0 update I noticed that the badge icon for the number of unread podcasts had disappeared. I  am an experienced iPhone user and went through the normal trouble shooting steps of syncing, uninstalling an reinstalling, but the bange icon always disappears after applicaton of the Podcasts 2.0 update.
    Has anybody elso noticed this behavior?

    yeah an option would be good.
    i'm still not sure myself whether this is intentional or a bug. especially as if you go in to the app and mark a podcast episode as played then go back to the full episode list again and then go back and mark the same one again as unplayed, then exit the app, it then shows that change on the badge app icon count, which as it's not a recent download but just recently marked as unplayed does seem a little buggy to me.

  • .AI Icons disappeared after update to 10.6.6

    Hi,
    My .AI preview Icons disappeared after update to 10.6.6, they do show in Quicklook, but not in the folders. They are now just show the standard AI icons.
    My other Imac's dont have this problem.
    Thanks
    Sarah

    Here comes the/my solution:
    Remove Sophos Antivirus
    Thanks to boojum's remarks in https://discussions.apple.com/message/15480849#15480849 !
    Don't forget to use Sophos' deinstall package: /Macintosh HD/Library/Sophos Anti-Virus/Remove Sophos Anti-Virus.pkg
    Nevertheless, some settings have been re-initialized (no complete list!):
    - Dock
    - Language has been reset to English only
    - Expose & Spaces
    (- probably all personal settings?)

  • IPhoto library disappeared after I updated Quicktime.  Help!

    I don't know if the two are related but my iPhoto library completely disappeared after I updated Quicktime. Please help!
    Jeri

    Jeri
    Disappeared from where? Your iPhoto Window? Or the Pictures Folder?
    Regards
    TD

  • Devices appear in itunes after loading then disappear after a few minutes. How do I rediscover my devices?

    My devices all disappear after a few minutes. How do I rediscover them?

    You may have a bad track pad sensor.
    http://blog.w3conversions.com/2006/04/faulty-trackpad-sensor-in-powerbook/
    Do NOT open the computer and detach the sensor. There’s no reason to. Here is the complete method for disabling the sensor:
    Move (do not delete) the following extensions to a different location (a new folder outside the extensions folder). You’ll find them in your system/extensions folder:
    * IOI2CControllerPMU.kext
    * IOI2CLM7x.kext
    * AppleLM7x.kext
    * Extensions.kextcache
    * Extensions.mkext
    Once moved, restart, and that little sensor will be disabled.

  • Imported animation disappears after being displayed

    Captivate 6, Windows 7 64 bit
    After I import PP project the slide displays the bullet points one by one and then disappears after the last bullet point is displayed.  How do I extend the display till the narration is completed?

    I have discovered the problem.  Slide duration was checked off  after High Fidelity.  Apparently that forces the animation to last as long as the slide
    Problem solved.

  • Render disappears before completion

    I have a QT reference movie, 2h18m, in HDV, which I'm trying to get converted to MPEG2 for delivery on dual layer DVD.
    Whether from the FCP timeline, or direct into Compressor, the render begins, then just disappears after around 2000 frames.
    The files are on an external eSATA drive, connected to the MBP via a Sonnet Tempo Sata Express 34, or a Sonnet card in the Mac Pro.
    On the MBP, the file plays in QuickTime, although it hung really completely at 2h2m. The mouse and keyboard were non-responsive, while the audio stuttered. I had to use the hard switch. I restarted and tried again at 1:58, and it played through to the end no problem.
    I moved the drive to the Mac Pro in order to leverage the processors. It still disappears even before the barber pole starts moving, although the estimation timer is running.
    I installed and ran Compressor Repair, just in case. No Help.
    i guess there's some issue with the file itself.
    Any ideas?

    Well, the hits just keep on rollin'
    So I read somewhere maybe it was a bad render. Deleted all renders and immediately exported to a self-contained QT-HDV. Still got a General Error and bad file.
    Next, I began the reconstruction. The final piece consists of three sections. The first three minute Intro, was exported to a reference QT-AIC file and imported back. Don't expect any trouble there. Next is a nested filed built of source and multiclips. I collapsed the Multiclips and exported it to self-contained QT-AIC in 5 minute segments--no crashes and no General Errors. Imported each segment and placed on the Master T/L above it's corresponding nested sequence. Finally I moved to the last piece, about 1h40m, where I deleted the Multiclip and replaced with the source clip, then exported in 10 minutes segments, importing those and placing on the Master T/L. This whole process took less than 4 hours, which I found surprising since exporting either nested piece had always taken 4-8 hours.
    Once complete, it flowed smoothly, as it always did in FCP (there never were any crashes when playing from any timeline in FCP, although there were hiccups until everything was rendered).
    So now I have an AIC 1440x1080i60 sequence, filled with media with the same format. I exported to a self-contained QT with current settings and markers for DVDSP. That took longer than expected, around 3 hours. I played the first 10 minutes in QT, and it looked fine.
    I imported that into Compressor for conversion to MPEG2. It was chugging along, foretelling about 3 hours to process. I expanded everything in the Batch Monitor, and saw 12 segments. At first 6 video and 1 audio streams were processing, which I also saw in Leopard's activity monitor. One process hung, so I forced it to Quit. The other continued. Eventually the audio finished successfully. Now we have 6 segments processing the first of the two passes (I'd selected a 2-pass transcode at around 6Mbps--the setting for Best Quality, 90 minute DVD, modified to 16:9), while the other six showed 'Waiting'. The total completion strip showed about 70% complete the last I looked. This seemed a bit much since there were several segments that had not yet successfully completed.
    The next thing I know, the entire Batch disappeared from the Batch Monitor. The Activity Monitor still shows qmasterd with 8 threads, one of which is Not Responding, two show zero, five show CPU around 150 (what does that mean, I thought it was percent of CPU usage, not to exceed 100?) and memory usage around 90MB. The CPU graph is almost all green, showing around 80% User and 15% System. There is still Read and Write activity going to the disks.
    If anyone can shed light on this, I'd be SO GRATEFUL.
    Should I let the processes run or kill them? Why does Batch Monitor show no activity? The destination folder shows segments 6,7,8,9,10, averaging around 500MB apiece. There's no sign of the final complete conversion, nor of segments 1-5,12.
    If this gets any more interesting, I'll ......... I"ll,,,,,,,,,,,, well, I'll just...............
    Apologies for the long involved post. What did I overlook? I didn't try reconnecting the files since none showed up missing when opening the project...
    OK, Activity Monitor still shows qmasterd but all processes show zero under CPU usage. Still can't find the final file, nor the AC3 file. Get Info show 46GB free on the drive.
    Any ideas?

  • Don't know the name of it but a toolbar at the top of the window has disappeared after I restarted Firefox. It contained add-ons such as Download Helper and I don't know how to get it back. Please help. Thanks!

    I don't know the name of it but a toolbar at the top of the window has disappeared after I restarted Firefox. It contained add-ons such as Download Helper and I don't know how to get it back. Please help. Thanks!
    EDIT: Sorry I meant the "Save Complete" add-on, not Download Helper.

    Be sure "Add-on Bar" is checked (click on "Add-on Bar" to check or un-check)
    *See --> https://support.mozilla.org/en-US/kb/Back%20and%20forward%20or%20other%20toolbar%20items%20are%20missing
    '''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
    Not related to your question, but...
    You may need to update some plug-ins. Check your plug-ins and update as necessary:
    *Plug-in check --> http://www.mozilla.org/en-US/plugincheck/
    *Adobe Shockwave for Director Netscape plug-in: [https://support.mozilla.org/en-US/kb/Using%20the%20Shockwave%20plugin%20with%20Firefox#w_installing-shockwave Installing ('''''or Updating''''') the Shockwave plugin with Firefox]
    *'''''Adobe PDF Plug-In For Firefox and Netscape''''': [https://support.mozilla.org/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]
    *'''''Shockwave Flash''''' (Adobe Flash or Flash): [https://support.mozilla.org/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash Updating Flash in Firefox]
    *'''''Next Generation Java Plug-in for Mozilla browsers''''': [https://support.mozilla.org/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox]

  • Email with attachment disappearing after i select it...

    email questions...
    i also have experienced my email completely disappearing after i open it - all of these emails have had attachement in .xls or .doc or .mov format. i really don't want my emails disappearing without me saying so. anyone else had this happen?
    also, says downloading "x" more number of emails but nothing comes in.

    robm2009 wrote:
    Hi Texas:  No my iPad is not jailbroken. I'm really just asking whether the built-in email program on an iPad is encrypted or if someone on the same free WIFI network as I am on is able to see my login and password with a sniffer program (or some such program).
    Thanks!
    All passwords on iOS based apps is encrypted. It is extrememly unlikely your iPad and that WiFi connection is where the problem lays. In fact, it is quite possible your actual email account wasn't used: The sender address could easily have been spoofed. The email itself is not encrypted (very few mail apps/providers do this), and unless you are in a situation where the mail you send is of such a nature as to be that confidential, encrypting email will be more trouble that it is worth (your recipients will need the encryption key to read it).
    Contact support for hotmail and change your password. You might consider changing yoru email address or even provider, but ther eis a chance that wouldn't stop the spam.

Maybe you are looking for