TV episodes in Different Folders

I bought season four of Downton Abbey. All previous seasons I have purchased have been automatically labelled "Masterpiece" in my itunes TV folder. The last episode of season 4 was automatically labelled as "Downton Abbey" instead. The result is Season 1 - 4 are all together and Episode 3 of season 4 is in its own folder and it's being displayed like that on itunes. How do I change the artist section so that they all are the same?

Hello J11235
You would have to highlight the files that you want changed and right click on the file and click Get Info. Once there, change the information that you want and Click OK.
Playing and managing content in iTunes
http://support.apple.com/kb/ht1399
Regards,
-Norm G.

Similar Messages

HOW CAN I TRANSFER PHOTOS FROM MY IPOD TOUCH TO MY PC BUT THESE PHOTOS ARE NOT IN THE SAVED POTHOS FOLDER. THEY ARE IN SEPARATE AND DIFFERENT FOLDERS THAT MY DAUGTHER SAVED FROM HER PC. IS THERE ANY FREE WAY TO DO IT. PLEASE REPLY TO JUMACAVA07@HOTMAIL.

HOW CAN I TRANSFER PHOTOS FROM MY IPOD TOUCH TO MY PC BUT THESE PHOTOS ARE NOT IN THE SAVED POTHOS FOLDER. THEY ARE IN SEPARATE AND DIFFERENT FOLDERS THAT MY DAUGTHER SAVED FROM HER PC. IS THERE ANY FREE WAY TO DO IT. PLEASE REPLY TO JUMACAVA07@HOTMAIL.
THANKS

If you need to Transfer photos from iPod to PC,I have a method for your reference,I suggest you use iStonsoft iPod to Mac Transfer software to copy photos from iPod to Mac,a professional software,Not only can you quickly Copy pictures from iPod to Computer,but also can save a lot of trouble and time
[B]Follow these steps to Transfer photos from iPod to Mac[/B]
Step 1. Download and run the iStonsoft iPod to Mac Transfer software on your Mac computer
Step 2. Connect iPhone with Mac
Step 3. Hit "Photos" to scan photos from iPod to Mac
Step 4. Click "Photos" button to transfer photos from iPod to Mac
Step 5. Wait a while,you will success Transfer these photos from iPod to Mac
How to Transfer/Copy Photos/Pictures from iPod to Mac computer

What is the best way to move files to different folders in a plug-in?

I am writing a plug-in that needs to move files on the hard drive. I am using LrFileUtils.move(from, to) and everything is fine except that the catalog is not updated when the file is moved. After the plug-in runs I can use Library > Synchronize Folder to get the catalog back in sync with the new locations of the photos on the drive, but this manual step is less than ideal.
I am unable to find a way to move the files within the plug in that also updates the catalog (like dragging photos to a new location within the LR Navigator pane). Lacking an API for this, I looked for a way to programmatic execute the Synchronize Folder menu item, but was not able to find this either..
Can anyone recommend a better way to move photos to different folders within a plug-in that also updates the catalog?

Hi Andy,
There are 3 main file formats that you can consider writing your data out to in LabVIEW:
ASCII
Binary
Datalog
ASCII
ASCII files are useful because every operating system and almost every application can read/write ASCII format files. Use ASCII files when:
Other users or applications will need to access the data file.
You will not need to perform random access file I/O
File I/O speed is not crucial
Disk space is not crucial
Examples within LabVIEW Example Finder: Fundamentals >> File Input and Output >> Write to Text File.vi and Read from Text File.vi
Binary
Binary byte stream files are more specific to data storage and retrieval. Use b
inary files when:
File I/O will remain in LabVIEW only -- no other applications will be needing to write/read that file. There is no standard formatting for binary files and thus other applications or operating systems may be unable to read the file.
Files are smaller than ASCII files
Easier and faster random access to data
Examples within LabVIEW Example Finder: Fundamentals >> File Input and Output >> Write Binary File.vi and Read Binary File.vi
Datalog
When to use datalog:
If you need to record data with a mixture of types, it can be cumbersome to convert everything to ASCII or to keep track of the binary formatting.
Datalog format is binary and internal to LabVIEW, so again only use this format if no other applications or operating systems will be needing to perform file I/O on the file.
Examples within LabVIEW Example Finder: Fundamentals >> File Input and Output >> Write Datalog File
Example.vi and Read Datalog File Example.vi
Good luck!
Kileen C.
Applications Engineer
National Instruments

How to create a Contact Sheet with Adobe Photoshop CS5 from a disc with images in different folders

I got a disc with images files (mainly ai and psd files) in different folders and subfolders, how can I create a contact sheet including all the image files in different folders. (It seems that Adobe Bridge can only create a contact sheet by clicking the image files directly but not a folder including the images files)
thx!

Use the optional Contact Sheet II plugin which is found in Adobe's Downloads:
1) search for contact sheet in PS CS5 help
2) choose the first result and read carefully about the Photoshop Optional Plug-In Picture Packager
3) follow the instructions to download the zip file and note the location that you download it to.
4) follow the instructions to install the files.
I'm not sure how PS CS5 will handle ai vector image files or if you have to batch convert them to raster images first before using Contact Sheet II. Contact Sheet II allows you to choose a folder and Include All SubFolders as an option so you could create a Contact Sheet folder and copy all of your desired folders into that folder which will become subfolders of the main folder you choose for your contact sheet.

Batch combine/merge different folders into 1 image?

I have a large set of images I need to batch process from 2 different folders, I want to combine 2 of the images into 1 psd, add a curve between the 2 layers, then save.
These images will ultimatly be imported into Premier for a video so the sequence is large. I have to do it this way because all of the models used are not compatible with the same set of lights.
Adding the custom curve action with Batch is easy, but photoshop does not seem to grasp the locations, sequences and outputs of the files. Is there a way to do this?
Open Folder1/BottomLayer001.png,
add saved custom curve,
Open Folder2/topImage001.png,
save to Folder3/Batch001.psd.
I'm thinking Imay have to use a script to do so, but I have no clue howabout doing that. I am in no way a coder.
Thank you

Only you know the logical order of you assets, how you want to combine pairs and the output files you want. There is no magic built into Photoshop. You right that Photoshop can be scripted and a script could most likely be written to do what you want to do. However you do not know Photoshop Scripting and likely you not a programmer. Which will require the least amount of time. You doing it all manually. Or you teaching yourself a support Photoshop scripting language that works on your platform. If you use windows and Mac platforms that would requite the language to be Javascript for a common solution. After you learn Javascript you need to learn Adobe Photoshop DOM for scripting Photoshop its limits and learn to use Adobe Photoshop Plug-in scriptlistener to get around the limits of Adobe Photoshop DOM. Design a Batch Process then Program and debug the process. Then run the batch process with your assets..
An other approach is to search the Web for a Photoshop script designed to do something similar to what you want. Download that script. If that script was not saved in binary you may be able to hack it to do what you want.
If you need the output by some date that is not far off. I would suggest that you start doing it manually or hire a Photoshop Script programmer you will help them learn what you want done so they can design and code a Photoshop Script the will meat your needs.
There is a Photoshop Scripting forum here and process similar to your have been discussed in threads. There may be some script there that may be helpful and users over there that can help you. I hack at Photoshop Scripting for I do have a very old programming background. I do participate in that forum however I'm not a Photoshop scripting expert I just get by.

I recently deleted many duplicate files. In the midst of it my Itunes songs are not in Itunes. They are in two different folders. One under 'Music' in my ID. And two under a MyMusic file in Documents. How do I know which one to import?

I recently deleted many duplicate files. In the midst of it my Itunes songs are not in Itunes. They are in two different folders. One under 'Music' in my ID. And two under a MyMusic file in Documents. How do I know which one to import?

Thanks, this is not an ideal answer but probably the most sensible one in my case.
I will try it unless someone has a better suggestion, but I'll wait a bit as it will take me a few days anyway (I had actually tried to create a new smaller playlist or download by album, but at this stage the music app is not letting me queue a list of songs for download - I think I will have to disable and re-enable iTunes match which will probably delete all the songs).
I have to say I am not very impressed with Apple here - having an online backup of all your data and beeing able to restore it to a new device easily was a strong selling point of iCloud. For music, they are Definitly not delivering at the stage.

Different columns and arrangements in different Folders

I arrange my mail into various folders. For various reasons, I need to have different columns visible and different arrangements of columns in different folders (Kind of like needing From: in InBox and To: in sent items.)
I can't figure out how to set this, by folder and have it 1) stick and 2) not impact other folders.
Help!
Thanks
John

must have not worn my glasses when i first checked that feature long time ago, so sorry for the erroneous info in my previous post, and no you cannot change column view whether within one email account or across email accounts. yikes, need to be more careful when i send info on these pages

Find graphics in different folders

Hi all
Using Framemaker 12 on Windows 8.1.
I have made a copy of my colleague's Framemaker files and images from our document management system and am finding the age-old problem of missing images.
My problem is that the files are in four different locations, and Framemaker seems to only be able to remember one path at a time. This means that unless two files from the same folder happen to be sequential in a document, I'm having to find each image manually, which is very tiresome.
I found the following thread about this and was full of hope...
"Manage Graphics". It seemed oh-so-promising.
In this thread it says
"So, if your graphics are in even just two locations, FrameMaker may ask you over and over for the locations because it is jumping back and forth between the two. This case is the case that I have. I typically give the location of the first graphic, then click ignore for all of the rest in the file (or until I get bored). Even though I am ignoring the remaining graphics, FrameMaker still remembers the location of the first graphic and keeps updating each one that it finds. Once the file opens, I save and close it. Then open it again, this time when I locate the first graphic, the open is quick because the only remaining graphics are those in the second location."
I thought, great! Just open the file, find the location of the first missing file, click Ignore the rest and then Save. Do the same for the other missing images (located in the different folders) and hey presto.
But alas, it does not seem to work like this for me. I still have to manually select each file and it's going to take forever.
Can anyone help please or is this just the way it is? I really want some way for FM to remember the location of the first graphics and use it for subsequent graphics...
Yours hopefully
Laura

> I have made a copy of my colleague's Framemaker files ...
Any chance you could do that step again, but this time Open the original files in FM, and then save them to the new location? If so, FM updates all paths as needed.
Of course, if your CMS won't let you, and/or the original import paths are inaccessible from your system, then ignore that suggestion.
Path transformations can be scripted. See the recent discussion on Text Insets.

How to make different folders in photo album

I have been addings photos in album. Now I want to make different folders in the album but unable to do so. Please guide.

I may be misunderstanding what you want to do,
You can create albums on the iPad in order to organize photos but I believe that you must be running iOS 5 at least. Your tagline shows iOS 4.3.2. It's been quite a while since I was running iOS 5, but I'm pretty sure it was introduced in iOS 5.
If you are running iOS 5 or higher, launch the photos app and tap on Photos, then tap on the Edit button in the upper right. Select all of the photos that you want to place into an album by tapping on them. Then tap on Add To and choose Add to New Album. Name the new Album in the popup window and then tap Save.
If you are not running iOS 5 - you have to import the photos from the camer roll to your computer, creat the albums on the PC and then sync them back to the iPad via iTunes.
read about importing photos here.
http://support.apple.com/kb/HT4083

Duplicate photos in different folders

I have duplicat photos in some different folders. How do I tell which folder, from within Aperture the photo was uploaded from so I can delete duplicates.

No, I have another internal hard drive which I know store all my raw photo's on and I have 2 or 3 other folders with duplicate images in them on that hard drive but don't know which one of those folders I Imported the images from. So how do Isolve that.So I can deleted the duplicates. Thanks for the reply
If you only want to know, if images in a folder on an external drive have already been imported, let Aperture check:
Connect the drive with the folders
Open Aperture's "Import" panel (the downarrow in the toolbar"
Make sure the option "Do not import Duplicates" is active and no images are excluded by "File type".
Select the folder in the file chooser in the Import panel.
If the Import window stays empty, then all images in that folder have already been imported.

How do I import photos to iPad2 from different folders in my Mac?

How do I import photos to iPad2 from different folders in my Mac?
I have a few folders of photos in my mac that I want to be on my iPad2. How do I go about on doing that?
It seems like I need to put all the folders into one folder and point iTunes to that main folder.
The thing is I don't want to copy them (waste of space) and I don't want to move them (my photos are organized).
So is there a way for me to import photos from different folders in my mac to my iPad2?
Thank you!
BTW... I don't use iPhoto.

Find software (which may not exist) to export them in a photo format (jpeg, tiff). IPhoto will not do it
LN

Importing files of the same name in *different* folders?

Yes, yes, we all know about the RAW+JPEG and whatever else argument.
But why should I be prevented from importing identical files that are stored in different folders? Who cares if they are in the library twice?
I haven't figured out if it's just a name issue (don't think so) or if the files have to be truly identical.
I *think*, but am not sure, that you can import separate files of the same name but that are actually different images. Can anyone verify?
Lee Jay

Bob,
It appears that you can import duplicate named files by unchecking the "ignore Duplicates' box--the first time you import files (or a file) from a folder. But, if you go back to that folder to use 'import' to update, then the import takes place immediately bypassing the screen with the "ignore Dulicates' box on it--I presume it assumes that you would not want to change any of the original settings for an import from a given folder.
The point is you had better leave it unchecked always if you want duplicates ingested intially or later on reimport.

Until the recent update, I could bookmark a url in different folders. Now I discover, after bkmarking to folder, the bkmrk command is gone and I can only edit

I bookmark url's in different folders. With this most recent update, after bookmarking into the first folder, I discover I can only edit. Seriously? I need to store the link in entirely disparate folders for my own purposes. I have established an organized set of folders (taxonomy) flexible to my professional needs. Please revise to include the previous flexibility of bookmarking more than once.

I need to bookmark a url into different folders for my professional work. This is not tagging, it is to make sure the url is available in completely discrete folders. If anyone knows of a solution, I would very much appreciate it. Until less than a week ago, I could bookmark into multiple folders without a problem.

Alter Database Remove File : Partition Files on different folders

I need to remove partition files, once I switch the partition with staging table and empty/truncate the partition.
When I was running the code on my local machine I was passing variable @partition_file_name to following statement:
Declare @partition_file_name varchar(128)='table_abc_201202',
@database_name varchar(128)='test'
Alter Database @database_name Remove File @partition_file_name
Note @partition_file_name is the logical name of the partition file.
I found out partitions are saved in different folders in my Dev env...They are stored in 12 different folders which are named like 1-12.
E.g:
C:\DATA\2\table_abc_201202.ndf
C:\DATA\3\table_abc_201203.ndf
C:\DATA\4\table_abc_201204.ndf
C:\DATA\5\table_abc_201205.ndf
C:\DATA\2\table_abc_201302.ndf
C:\DATA\3\table_abc_201303.ndf
C:\DATA\4\table_abc_201304.ndf
C:\DATA\5\table_abc_201305.ndf
I am wondering , is SQL server with Alter statement is capable of getting the right path for each partition files and remove them accordingly? Or do I need to pass the physical path to the alter statement to get it removed. Though I tried doing that and
got the error.
ZK

I am wondering , is SQL server with Alter statement is capable of getting the right path for each partition files and remove them accordingly? Or do I need to pass the physical path to the alter statement to get it removed. Though I tried doing that and
got the error.
Yes, SQL Server knows which physical file goes with which logical filename. (To see that SQL does know this, do a SELECT * FROM sys.sysfiles - you'll see SQL has a row for every logical filename and that row has the corresponding physical file name.)
And when you do the ALTER DATABASE REMOVE FILE, you must specify the logical filename. You will get an error if you give the physical path.
Tom

Save in different Folders RAW/JPEG

Hello,
is there any possibility to save the raws and jpegs in different folders ?
(in one step, after connecting the camera)
My workflow is as follow:
Connect the camera
Save the jpegs in a folder (for example: April 2007)
Save the raws in a folder (for example: RAWS 2007)
Thank you very much for your help
Sorry, for my english :-)
Marco

Make playlists on your computer, then sync them to the ipod.
You do not have axxess to the folder system on the ipod at all.

TV episodes in Different Folders

Similar Messages

Maybe you are looking for