TV flashes when connecting iPad with HDMI

I bought the Apple 30-pin Digital AV Adapter to connect my iPad with the TV, with an HDMI cable. The problem is that when I connect everything, the image appears on the TV, but in two seconds it starts to blink, like making flashes. I changed the HDMI cable, but nothing goes better. HELP!!!

I have been trying all day to transfer photos from my mac to my IPad.  When I open I Tunes as instructed there is no tab for photos.  There are only apps and music.  I can open Iphoto on a separate icon on my computer, but is this considered ITunes?  When I open iphoto and click on my ipad devices name it only shows photos I took on my ipad.  When I click on the iphoto library and select photos it won't allow me to drag them to my ipad device.  Totally frustrated and confused. I tried the ctrl+s and ctrl+B but nothing happens. 

Similar Messages

  • Toshiba 40E200U1 - No sound when connecting laptop with HDMI

    Hi,
    I have a asus laptop (Windows 7) with an hdmi output. I have used it with several TV's without any problems(Philips and Samsung).
    We just bought a Toshiba 40E200U1 and when I connect the laptop I get a picture but no sound. I have configuredthe sound settings to output sound through HDMI.
    DVD and Cable box works fine, connected through HDMI, works fine and I have also tried different HDMI inputs onthe TV.
    The latest firmware update for the TV is installed.
    Thanks for any suggestions!

    Any suggestions??

  • Why does 2nd gen iPad flash when connected to charger?

    2nd gen ipad will not charge - instead flashes when connected to charger

    Try giving your iPad a reset. Hold down the sleep and home keys for about 20 seconds. When you see the silver apple, let go and let it reboot and try again
    You can also try a different charger,cable and outlet and see if they are hte issue.
    Are you trying to charge via USB or plugged into the wall? If via USB, try charging with the included power block plugged into the wall

  • Hi all, I'm trying to connect my macbook pro to Sony Bravia tv using Kanex Mini DisplayPort to HDMI Cable with Audio Support , when connected to the HDMI on tv I get a picture of the mac screen saver ( the starburst ) no video/audio,thanks, Derek

    Hi all, I'm trying to connect my macbook pro to Sony Bravia tv using Kanex Mini DisplayPort to HDMI Cable with Audio Support , when connected to the HDMI on tv I get a picture of the mac screen saver ( the starburst ) no video/audio,any ideas? thanks, Derek

    Dave I'm glad to say that it works perfectly but I'm embarrassed to say that my 12 year old nephew hooked it up in about 10 minutes.
    If you have the Kanex Mini DisplayPort cable it will work, what confused me was changing the display settings in System Preferences,
    and dragging the mac screen from the mac onto the tv. Sorry I cant be more helpful but you have the right cable now you need a 12 year old nephew.
    Good luck Derek

  • When connecting ipad to iPhones personal hotspot via wifi it is showin up as 2 connections when only 1 device is connected. Is someone hacking my phone?

    When connecting ipad to my iPhones personal hotspot via wifi it is showin up as 2 connections when only 1 device is connected. Is someone hacking my phone? I only figured out I had a problem when my partner did the exact same set up and it showed up as only 1 device connected. I have changed the password and turned it off/on and etc. the really weird thing is now when my ipad is turned off and I turn my iphone personal hotspot on it shows up with 1 connection (when I don't have anything connected) for about 5 secs and then goes off and then 1 device connected for about 5 secs and then back off. This just keeps going on and off. What is going on. Could my phone have a bug or be hacked. Please help as it is kinda freaking me out. Thanks.

    Hello asrt17,
    This may occur if your iPhone is connected to your computer via USB, as it will automatically share the connection via USB.
    iOS: Troubleshooting Personal Hotspot
    http://support.apple.com/kb/TS2756
    When Personal Hotspot is enabled, your iOS device automatically shares your Internet connection with your computer when connected using USB.
    Example: When you connect iPhone to your computer to charge or sync with iTunes. To avoid unnecessary data charges, turn off Personal Hotspot when not in use.
    Cheers,
    Allen

  • Lost my apps when sync iPad with iTunes

    when sync iPad with iTunes, apps purchased in iPad by another account were lost, and the apps can't be seen when check for available downloads. How to get back the purchased apps? thanks.

    If you lost all your apps on both the iPad and the computer, you can download the apps again at no cost. You can search your emails for app store purchases if you can't remember all the apps that you have downloaded.

  • How i can connect ipad with ipad mini via bluetooth

    how i can connect ipad with ipad mini via bluetooth?

    for what purpos?
    this is what bluetooth profiles ios devices support out of the box
    http://support.apple.com/kb/HT3647?viewlocale=en_US&locale=en_US
    but there maybe more features supported by apps from app store as a bluetooth profiles such as PAN give the client server possiblities

  • Satellite A500 - Battery light flashes when connected to mains power

    Win 7 Satellite A500 PSAM3A-03P00E.
    The battery light flashes when connected to mains power (intermittent fault), when I unplug mains and re-connect flashing stops and battery (high capacity) continues to charge.
    Also when battery light flashes the key board back lighting stays on when it should blank out and if the back lighting is off and the battery light starts flashing the key board back lighting doesn't turn on, all other functions seem to work fine.
    The battery charges and holds charge as it should (when light flashes battery doesn't charge).

    Hi
    Did you notice this issue from first day of purchase?
    Theoretically it could be possible that your battery starts to malfunction
    At the other hand an electronic issue might be possible too
    However, try this:
    Remove ac adaptor and battery. Then press and hold power buttons 30 sec long.
    Then insert the battery and connect AC adaptor again does it helps?
    By the way: is BIOS up to date? If not, perform an update.

  • Battery light flashes when connected to mains, (intermittent fault) battery in good condition.

    Win 7 Satellite A500 PSAM3A-03P00E. The battery light flashes when connected to mains power (intermittent fault), when I unplug mains and re-connect flashing stops and battery (high capacity) continues to charge. Also when battery light flashes the key board back lighting stays on when it should blank out and if the back lighting is off and the battery light starts flashing the key board back lighting doesn't turn on, all other functions seem to work fine. The battery charges and holds charge as it should (when light flashes battery doesn't charge).
    Solved!
    Go to Solution.

    All fixed, the earth contact in the power jack was bent down allowing intermittent contact and limiting current. I bent the contact back up to where it should be and all is good.

  • My phone5 does not start. Apple logo just flashing when connected to charge

    my phone5 does not start. Apple logo just flashing when connected to charge

    connect to itunes and restore your iphone

  • Why am I getting sound distortion when connecting iPad 2 to amplifier.

    I am getting sound distortion when connecting iPad or iPod thru amplifier using AirPlay or 3.5mm to rca cables. Also the sound has far too much bass. No problems when connected in car.

    It sounds like a mismatched impedence.  What are you connecting to?   the output from the jack is intended for headphones, and is not just an audio out.
    Try turning the volume on the pad way down, and use the gain on your amp, and see if that minimizes the issue.
    There is a pure audio signal for both channels on the 31 pin plug, but you would need a special cable to use it.  I would bet they are available if you google.  Although I have read that the 31 pin signal is not filtered like the headphone output, so while it is a pure audio output, there may be some noise in it that would need to be filtered.
    Try google for a 31 pin cable.  ( the input for the car is probably built to take a signal from a headphone output, while your amp may be expecting a lower power signal)

  • I cann't connect ipad with my windows 7 laptop using bluetooth

    I cann't connect ipad with my windows 7 laptop using bluetooth

    for what purpos as you cant sync or transfer files using bluetooth
    on ios devices
    this is the profiles the ios devices support
    http://support.apple.com/kb/HT3647

  • When connect ipad to laptop get the message, "This Ipad cannot be used because the Apple mobile device service is not stated" what do I do?

    when connect ipad to laptop get the message, "This Ipad cannot be used because the Apple mobile device service is not stated" what do I do?

    See Here   http://support.apple.com/kb/TS1567

  • 6720C :how disable flash when taking picture with ...

    hi,please how disable flash when taking picture with camera in 6720?

    when camera is open a list pops up here it is
    The toolbar provides you with shortcuts to different items and settings before and after capturing an image or recording a video clip. Select from the following: Switch between video and image mode.
    Select the scene.
    Activate panorama mode.
    Turn the video light on (video mode only).
    Select the flash mode (images only).
    Activate the self-timer (images only).
    Activate sequence mode (images only).
    Select a colour effect.
    Adjust the white balance.
    Go to Photos.
    scroll to flash and turn it off there
    If  i have helped at all a click on the white star below would be nice thanks.
    Now using the Lumia 1520

  • Cannort connect ipad with itunes windows

    cannort connect ipad with itunes windows

    If your new iPad 3 has iOS 6.0.1 on it you need iTunes 10.7 or later in order to sync. iTunes 11.0.1 is the current version available to download from Apple. In order to run iTunes 10.7 or later your computer must have OSX 10.6.8 or later.
    Your iMac has one OSX version to early to run the required iTunes. Go to the online Apple Store and search for OSX 10.6.8 (Snow Leopard) and then check the system requirement to see if your iMac can run snow Leopard. If it can purchase the upgrade and install it on your computer.
    Once you install Snow Leopard you might consider upgrading further to Mountain Lion as that integrates better with iOS devices.

Maybe you are looking for

  • Putting a still image in a menu frame

    Hello, I am making a DVD menu using a standard template. There is a frame in the template to take a still image. When I put an image in this frame only part of the original still is shown. I have tried resizing the image but to no effect. Can anyone

  • Using ViewObject with a foreach tag in a jsp

    Hi guys I have the following scenario: 1- I call a certain .jsp page 2- a controller class (extends servlet) is called, this class: takes a view object, executes it's query, forwards the result to the jsp page. 3- jsp page has a foreach tag that iter

  • Slow to navigate - only initially

    I'm having a unique problem with my new iMac. When I open a new browser instance, it loads my home page fine. However, when I try to navigate somewhere else, there is an extended delay. This delay is only there for the first 1 or 2 sites I try to hit

  • How do you put a command line in adobe illustrator?

    how do you put a command line in adobe illustrator?

  • Bapi or FM, to create an inbound delivery with the VL31N (ASN) Urge transac

    Hi To all, in this forum and abap programming are new, but I have a requirement that I occupy automate the generation of an inbound delivery (ASN). in the transaction vl31n generates an asn but I occupy do in automatic and ando seeking a BADI, BAPI,