TV green in HDMI 1080p 60hz I mean all green... Ok in 1080i 46XV640UZ
46XV640UZ All in green can't run and is flashing when in HDMI 1080p 60hz. I just bought a computer to plug to it and figure out it can't run 1080p... any idea of the problem?
Attachments:
IMG_20130220_215701.jpg 101 KB
Updated it to the firmare 1.03 but can't get it to accept the firmware 1.09 which is available...
Similar Messages
-
Why does my airport base station show all green lights but doesn't connect to the internet?
I have an Airport Express Base Station that has been working beautifully up until this morning. For no apparent reason (changes in ANYTHING), I cannot connect to the internet through it. Here's the situation:
The light on the airport is solid green.
Aiport Utility shows all is well...the base station shows up, with green light, IP address, etc.
Network Diagnostics shows "your connection to the internet seems to be working correctly."
Connecting the modem directly to the computer via ethernet cable works fine...internet humming right along.
Connecting the modem to the base station doesn't work, even though all green lights and "all systems go" diagnostics.
Wireless access via iPhone and iPad not working, either, so definitely not computer-based issue.
No changes have been made to anything. I'm running 10.6.8 on a 2007 MacBook Pro.
Can anyone help?
Thanks,
NancyHi Bob,
Thanks for responding.
Does that IP address start with 169, or something else?
The IP address starts with 10.0...
Does this mean that the iPhone and iPad can connect to the wireless network....but not get to the Internet?.....or.....does this mean that the iPhone and iPad cannot connect to the wireless network at all?
They can see and connect to the wireless network, but aren't connecting to the internet, just like my computer. Sorry for not being clear about that.
Can you look on the side of the AirPort Express to locate the model number? Hard to see, you may need a magnifying glass. Starts with an "A" followed by four numbers, as in A1264, or A1084, for example.
The model number on the Airport is A1392.
Any insights based on this info? Thanks for your help.
Nancy -
Is HDMI Output have HDCP on all the time?
I have an older HD TV. It does not have an HDMI input only DVI and it cannot decode HDCP signals. I have an HDMI to DVI adapter and when some programming turns on my HDCP on my DirecTV DVR I cannot watch the program through DVI. Does anyone know if all of Apple TV2 HDMI output has HDCP enabled all the time?
If that is the case Apple will have a lot of unhappy people that buy their HDMI to DVI cable to connect their TV, as very few DVI TV support HDCP.This is from the licening agreement the manufacturers have to follow for HDCP:
They don't allow them to allow HDCP TO BE DISABLED. Must be the key to FREE HD copying
GENERAL IMPLEMENTATION QUESTIONS
1. Has the Licensed Product been designed and manufactured so there are no switches,
buttons, jumpers, or software equivalents of the foregoing, or specific traces that can be cut, by
which the content protection requirements of the HDCP Specification or Compliance Rules can
be defeated or by which Decrypted HDCP Content can be exposed to unauthorized copying?
2. Has the Licensed Product been designed and manufactured so there are no service menus
or other functions (such as remote-control functions, switches, check boxes, or other means) that
can intercept the flow of Decrypted HDCP Content or expose it to unauthorized copying?
3. Does the Licensed Product have service menus, service functions, or service utilities that
can redirect or expose the flow of Decrypted HDCP Content within the device?
If Yes, please describe these service menus, service functions, or service utilities and the
steps that are being taken to ensure that these service tools will not be used to expose or
misdirect Decrypted HDCP Content.
4. Does the Licensed Product have service menus or remote control functions that can
defeat the content protection requirements of the HDCP Specification or Compliance Rules?
If Yes, please describe these service menus or remote control functions and the steps that
are being taken to ensure that these service tools will not be used to defeat the content
protection requirements of the HDCP Specification and Compliance Rules.
5. Explain in detail how the Licensed Product protects the confidentiality of all Device
Keys.
6. If the Licensed Product delivers Decrypted HDCP Content from one portion of the
product to another, whether among software modules, integrated circuits or otherwise or a
combination thereof, explain how such portions have been designed, associated and integrated
with each other so that Decrypted HDCP Content is reasonably secure from interception and
copying as required in Section 3.1 of the Robustness Rules.
7. Are any HDCP functions implemented in Hardware?
If Yes, complete hardware implementation questions.
8. Are any HDCP functions implemented in Software?
If Yes, complete software implementation questions.
SOFTWARE IMPLEMENTATION QUESTIONS
9. In the Licensed Product, describe the method by which all Device Keys are stored in a
protected manner, or that Device Keys are not accessible to software.
10. Using the grep utility or equivalent, are you unable to discover any Device Keys in binary
images of any software?
11. In the Licensed Product, for all HDCP values accessible to software for which
confidentiality or integrity is required as indicated in Table B-1 of the HDCP Specification,
describe the method by which these values are created, held and used in a protected manner.
12. Describe the method being used to prevent commonly available debugging or
decompiling tools (e.g., Softice) from being used to obtain Highly Confidential values contained
within or generated by the HDCP functions implemented in software.
13. Describe the method by which the Licensed Product self-checks the integrity of
component parts in such manner that modifications will cause failure of authorization or
decryption as described in Section 3.2.2 of the Robustness Rules. Describe what happens when
integrity is violated.
14. To assure that integrity self-checking is being performed, perform a test to verify that the
executable will fail to work once a binary editor is used to modify a random byte of the
executable image containing HDCP functions, and describe the method and results of the test.
HARDWARE IMPLEMENTATION QUESTIONS
15. In the Licensed Product, describe the method by which all Device Keys are stored in a
protected manner and how their confidentiality is maintained.
16. Using the grep utility or equivalent, are you unable to discover any Device Keys in binary
images of any persistent memory devices?
17. Describe the method in the Licensed Product by which the HDCP values for which
confidentiality or integrity is required as indicated in Table B-1 of the HDCP Specification, are
created, held and used in a protected manner.
18. Describe the means used to prevent attempts to replace, remove, or alter hardware
elements or modules used to implement HDCP functions?
19. In the Licensed Product, does the removal or replacement of hardware elements or
modules that would compromise the content protection requirements of the HDCP Specification
and the Compliance Rules damage the Licensed Product so as to render the Licensed Product
unable to receive, decrypt, or decode HDCP Content?
Notice: This checklist does not supersede or supplant the HDCP Specification, Compliance
Rules, or Robustness Rules. Adopter and its Test Engineers are advised that this checklist does
not address all requirements of the Robustness rules, or the requirements of the HDCP
Specification and Compliance Rules -
Imovie is limited to its import formats and does not allow for storing video in any rawformat. Which means all videos will contain lossy compression applied to the video….with no way to edit full format video. Is this statement true? Does iMovie support HD 1080p @ 60 fps?
Iggy826 wrote:
… Is this statement true?
yes and no!
using the intended Import from Camera routines, iM converts automatically in its very own AppleIntermediateCodec. so, answer is yes.
but …
a) Apple claims , aic is non-lossy intermediate codec. working with proRes in FCPX taught me, there are even less non-lossy-ness codecs
b) iM offers an Archive feature, which is basically a simple Finder/copy operation which 'clones' your SDcards content into some folder on your harddrive; e.g. you can later use these untouched 'raws' in another editor such as FCPX. so, answer is no.
c) when you 'override' the import routines by manually re-wrapping mts into a mov container, iM handles the 'native' h264s ... so, answer is no.
d) adding any effect, transition etc. reduces any interlaced source to 540p. (if you're working with 720p source, res is kept) … so, answer is yes. or, in 720p case, no.
< Johnny Depp's voice >… savvy?
Does iMovie support HD 1080p @ 60 fps?
via Import from Camera? No.
via re-wrapped mts>>mov? I was told yes, some say no.
one thing to be kept in mind when talking about these 'issues':
iM, this 12€, is meant as a CONSUMER toy tool.
it supports AVCHD vers1 (=no 1080/60p, no >24Mbps, no 3D).
fingers crossed, we'll see soon some iM/QT/FCPX update for support of AVCHD v2 ........
the main consumer devices are within the specs, iM supports.
using professional equipments makes usage of professional software (FCPX, AP) optional.
sorry for lengthy answer. -
HT202790 Email is stuck in my OutBox. Connection Doctor has all green lights.
I have three Apple devices and three email accounts in MAIL. On only one device (my MacBook Pro), I can send email but outgoing emails stay in the Outbox. Connection Doctor gives me all green lights. I've double checked my outgoing servers and ports, etc.
What do you mean by " I can send email but outgoing emails stay in the Outbox."
If they are still in your outbox they are not sent.
Is that true for all three accounts when you originate the message from the different accounts?
What accounts are they?
Can you receive mail from all three accounts?
Have you tried deleting the accounts from the Mail app and reentering the settings? -
I keep getting the following message "some items (meaning all of them) were not transferred because iTunes match is enabled." when I try to drag and drop a playlist, song, or album to my iPhone. This was NEVER a problem before iTunes match or the last iOS update. So what is the deal? Why can't i just add music to my phone from the mac? There is space on the phone. The only way I have found to get the music i want to the phone is to have it download from the phone. This is not something i want to have to do: go through and manually add every album and recreate a playlist on the phone when its there on the mac. And, even more irritating, since the new update, when the phone is plugged into the mac i can't actually view from the mac what music is on the phone. This is incredibly frustrating and any help would be much appreciated in managing my music libraries for each device.
Hi,
You cannot manually manage music with match turned on on your iOS device. If you want to manage music manually, you will need to turn off match on your iPhone.
Jim -
when i go to sync my apps with my computer it tells me ''are you sure you want to sync apps ? all exsisting apps and there data on (iphone) will be replaced with the apps on this itunes library'' does this mean all my data will be lost if i continue ?
Regarding your broken, previously authorized computer, here's how that works:
You would authorize your new computer -- maybe you've done that already. Then you will have two computers authorized. Apple allows you to have up to five computers authorized at any time. If you get to five, you can then go to your account details in iTunes and remove all authorizations.
Bear in mind this is not saying you can synch to more tham one library. Razmee209 and gdgmacguy's comments above are correct. But if Apple only allowed you to authorize one computer at a time, then having a broken computer would mean you could no longer use your Apple ID with iTunes. -
Went through this step-by-step, but alas it did not solve the problem. For some reason I can download mail on my Macbook Pro and iPhone, but no my iMac. Connection Doctor shows all green lights. This started today when I was prompted to re-enter incoming mail server passwords. I re-entered passowrds yet again to make sure they were correct. Rebuilt the inBox. Connection Doctor continues to show all green lights, but am still unable to download mail to the inbox. Has anyone else ever run into this problem?
I have the exact same problem trying to use the Remote app on both my iPhone 3gs and iPad 2 with either my Mac or ATV2. My Remote app used to work on my phone - I can't recall if I ever actually used it with my iPad, but when I tried today, I got all the same results as you did (on both iPad, and then iPhone). I was using my ATV2 to play music from iTunes on my Mac and wanted to use the Remote app, but it would not connect to either device no matter what I did.
-
Can I use the HDMI out on a HP ALL IN ONE TOUCHSCREEN Desktop to connect a second monitor with HDMI
Can I use the HDMI out on a HP ALL IN ONE TOUCHSCREEN Desktop to connect a second monitor with HDMI in without any additional software or graphics adaptor. I have a 520-1070
HP - 23" Touch-Screen TouchSmart All-In-One Computer - 8GB Memory - 2TB Hard Drive ? I used a HDMI to HDMI cable and the monitor was not recognized.Here are the specs for your HP TouchSmart 520-1070 Desktop Computer. As previously stated your computer Doesn't have a HDMI output, instead it has a HDMI input. This is designed to let you connect a game console, a DVD/Bluray player, etc. to use as a monitor.
If you wish to conect a second monitor to your computer, you will need to use a USB-to-video adapter such as the EVGA UV Plus+ UV39 or EVGA UV Plus+ UV19. Using an adapter like these with the touch feature of your computer may cause issues with pointer control and you may need to disable the touch feature to use "extended desktop".
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240 -
Does family sharing mean all photos are backed up to one icloud account?
I am unclear what Family Sharing means.
Does family sharing mean all photos are backed up to one icloud account? Or simply that we can all see each other's streams. As it stands now, I understand we can share streams, without having family sharing enabled. Basically, I want to know if we can be logged into separate icloud accounts yet share photo and document storage as we currently can with dropbox.
I want to share photo storage and file backup with my wife. Currently, we both use her apple id to make store purchases and have our own icloud accounts. This solves some problems, but I still have old itunes purchases(grant you fairly old at this point) that I cannot access when I am logged into her id.
I realize we could both use our own icloud account and upgrade storage individually, but this fails the economy test. We have roughly 60 gb of family photo storage, so we would both need 200 gb plans.
we both have ipads and iphones. i simply want us each to be able to take photos and have them automatically saved to one storage solution.
Thanks in advance.
ShalomThe only way you can see the contents of an iCloud backup is to restore it to an iOS device. You could restore it to your new phone -- but that would mean you would first have to erase your new phone so I wouldn't recommend it unless you have nothing of value on the new phone. In theory you could backup the new phone, erase it, restore from the old and see what is there and copy the photos to a computer and then erase it again and restore it back from the new phone backup. I would emphasize that is at your own risk as restoring from backups do not always go as advertised. More info: iCloud: Restore your iOS device from iCloud
-
Hi there can anyone help. I am connected to the Internet by Ethernet but my connection keeps timing out and my network diagnostics shows all green and network connection ok but still no Internet connection. the other wireless laptop in my flat works well. Could the other wireless laptops being used in my flat be affecting my connection. what can I do to get connected, keep connected. Thanks for any ideas out there.
My network connected for a few hours then went back to timing out. I have not changed anything. However there four additional laptop users in my family who do not seem to be having any problems using their wireless connection. Could their film and music downloads be causing the timing out of my connection and if so is there a way I could prioritizes my computer or limit their use?
-
i have just used air display with macbook pro. i have disconnected now from apple tv. but my laptop screen is still very small like its connected to the tv. this means all the tabs and writing is very small. like the display down the bottom where al the applications are, is n the middle of the page and not spread down the bottom. this is seriously annoying! all the writing is every small and the tabs are small and its hard to read. the air display link has disappeared from my computer. but the laptop screen is still very small. i want to know how do i get rid of this and return my macbook screen to its normal size. thank you
Hello chrispyw,
If your content is still being displayed incorrectly, I would check the resolution setting for the built in display with this article:
OS X Yosemite: Adjust your display’s resolution
If it keeps happening whenever you use AirPlay then I would use this section of the following article to reset the display system:
Apple computers: Troubleshooting issues with video on internal or external displays
Reset the system
You can reset the Mac's parameter RAM and SMC.Reset the resolution
Start by resetting the Mac's parameter RAM. If the display does not come up, was previously set to an unsupported resolution, and still results in no video:
Start up in Safe Mode.
From the Apple () menu, choose System Preferences.
Choose Displays from the View menu to open the preferences pane.
Select any resolution and refresh rate that your display supports.
Restart your computer.
Thank you for using Apple Support Communities.
Regards,
Sterling -
Apple experts, video goes all GREEN-what is happening there?
Hello,
I see that others are having this problem with their video being replaced by an all-green screen. The audio is still there, but your screen is green, on your DVD and when you make and play a disk image.
Can you tell us what, exactly, is happening there?
With mine, it seems to begin and end with chapter markers. Begins with Ch. 11, pops back to great video with Ch. 16, good till the end, Ch. 27.
Ch. 11 begins with a dissolve to iMovie text over an iMovie background. Nothing special. That's followed by a 2-min. video from the internet (with permission)
but then, several chapters of nothing-special video and audio, no voiceover, no audio effects.
I have voiceover in the last chapter, which is fine.
I'll try to see EXACTLY where this problem starts, today. Do chapter markers have something to do with it? Don't know.
jrybergHi, "bad green screen people",
I beat the problem today. My sizeable video, with brief preshow video, and 4 slideshows, is successfully on DVDs now. No green screen.
I went to the "Soft Frame Main" menu. I put just one photo in each of the 3 drop zones, which are found only on the Title page, in this theme, not in the chapter button pages. Your photos are NOT sized for the "zone" so you have to find photos that look ok. (Subject in the right place).
I didn't resize the chapter buttons, but I did "select all" on each page, and clicked "still frame". And I did choose "push" for the transition. And with the slideshows, I used "reveal". Works fine.
But I want to take this new Macbook Pro up to the Apple Store in Chicago, and see if they can see anything wrong. iDVD quit twice again, and things were just a little too dicey.
Finally, I did make a disk image before the actual disk. But knowing WHEN YOU'RE PLAYING THE DISK IMAGE is kind of hard to tell. I found it in "documents" but it was grayed out. I guess you have to double-click the icon on the desktop, and then launch DVD Player. And when it played, I didn't see .img anywhere. And I'm still unclear as to whether the green screen problem will show up, if you have it, when you play the video right after processing, playing it IN iDVD.
Well, anyway, it was a learning experience, and I won't burn any disks from now on, w/o checking right after processing, and doing a .img.
Thanks for your input, you three, and maybe we can help each other again.
Jerry -
iMac will not load internet sites, despite having all green lights (strong WiFi signal etc) on the Network Diagnostics screen. in other words there is a strong
internet wifi signal going into the iMac but the machine does not connect to the internet. I OS 10.9.5. Other devices work fine with the same internet signal.iOS 10.9.5 does not exist.
iOS refers to the operating system on iPhones, iPads, and iPod Touch.
10.9.5 was never a version of a Classic operating system.
10.9.5 was a version of Mac OS X, and is 13 years newer than Classic.
Here are reasons for WiFi signal to fail even when they appear to be strong:
Most common Wifi issues
Your Mac may be too close to your WiFi router, in which case, it might be better to connect to it via an ethernet cable if it can't be moved. -
I have imported some studio footage to my timeline and when i play it back the playback screen is green, even the footage in the timeline is green. anybody have a solution? thanks!
Exactly WHAT did you import?
Exactly what is INSIDE the video you are editing?
Codec & Format information, with 2 links inside for you to read http://forums.adobe.com/thread/1270588
Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
https://forums.adobe.com/thread/1070933 for screen shot instructions
Free programs to get file information for PC/Mac http://mediaarea.net/en/MediaInfo/Download
More information needed for someone to help... please click below and provide the requested information
-Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840
•What is your exact brand/model graphics adapter (ATI or nVidia or ???)
•What is your exact graphics adapter driver version?
•Have you gone to the vendor web site to check for a newer driver?
•For Windows, do NOT rely on Windows Update to have current driver information
•-you need to go direct to the vendor web site and check updates for yourself
•ATI Driver Autodetect http://support.amd.com/en-us/download/auto-detect-tool
•nVidia Driver Downloads http://www.nvidia.com/Download/index.aspx?lang=en-us
Maybe you are looking for
-
Cool trick for 10.4.8 users you may not know about....
if you have a mighty mouse or a scroll wheel, hold down control and twizzle it. cool eh? now move the mouse around. very cool. you can turn the same setting on to be used with key commands in system preferences -> universal. but i think this new feat
-
Variable size item formulla key funtion module,
I am developing user interface for manual reservation (cutsom development). User wants to calculate quantity of material if he enters size1, size2 and size3. Also he wants that a formula key option to be provided so that he can mention conversion for
-
I am frustrated! I add content to my iTunes library from a cd, then find that I am unable to load it. When I click and drag an item to my device, the red NO symbol appears and I am unable to load it onto my phone, although I have synced the devices
-
Could somebody share your experiences on 'Tax Group' Functionality? We have acquired a new company and need to maintain Tax group since we have to convert FICA, SSmax and stuff. In a way w2 should show 2 GRE for an employee and together the max amoun
-
Web gallery syncing (Aperture 2) - Why does it resend all images?
Hi All, I have a number of web galleries, many of which I like to continually update as I make new photos. But when, for instance, I want to add a single photo to a gallery that already contains 50 images, I tell it to synchronize the gallery, it upl