TV Guide - No information available
Since digital switchover in Northern Ireland on 24 Oct. I have been missing channels from the guide. The guide shows the channels with the staement "no information currently available". Specifically the channels are 11, 12, 15, 19, 21, 24 and 29.
I have tried full reset including power off and rescans to no available. Does anyone have any idea what is happening?
Solved!
Go to Solution.
All - I have just rang BT vision Helpdesk (Yes, I was that bored)
apparently we have just went through a Digital Switchover in Northern Ireland (Really??!!) and it will take a few days for the information to be populated on the EPG.
Not sure about the rest of you, but about 6 of my channel information is missing - two being Dave and Film 4.
Both signal strength and picture strength are 100% i can watch the channels, just don't have a clue what is on or is coming up.
The BT employee then proceeded to try to explain the issue to me which confused me even more, the only thing it managed to do was to bring back memories about Eric Cantona's famous speech - you know the one ' When the seagull follows the trawler'...
It completely baffled me, but in the end he told me to wait a few days.
Will keep an eye on it.
Mac.
Similar Messages
-
I placed an upgrade order for two phones, an iPhone 6 and 6plus.
I was in the Verizon shopping cart at 11:55 and checked out by 12:01 AM pacific time.
I do have my email confirmation for both phones with ship date 9/19
The iPhone 6 has shipped with tracking number and the charge to my card came through for the price of this phone.
There is no other information available - nothing on the status of the 6 Plus. Customer service doesn't know if this is normal or if my order went through, its really bad.
Any further information would be much appreciated.I was just told by a Verizon sales rep that, when her team got in, when she checked the system at 3:03 (midnight+ 3 minutes) all 6Plus had a back order date of October, and now its going into November even though the pre-order system was showing 9/19 - that all verizon iphone 6 plus had an instant sell out.
She had no additional information on my iPhone 6 plus, not even if there was a chance for it to ship out, when the back order date would be - no further information.
(A different rep I talked to said all iphone 6 plus pre orders had a ship date of October, all of them - I asked what Verizon is going to do when they advertised iphone 6 plus for 9/19 delivery and your telling me they never had any available - at this point he transferred me... *****) -
Web Services No JAX-WS context information available.
Hi Guys,
Hope you are doing well. I need a bit of help here. I have developed a java application and I am trying to make it a web service. So can you guys help me . Whenever I try "http://localhost:9090/" I keep getting "Web Services No JAX-WS context information available." this message. I have not yet developed a client. So far I am just trying to run it as a service. Below is the code for a sample Java application. I am thinking if I can get this Java program to work then maybe I will be able to get my Java program to work.
package Endpoint;
import javax.jws.WebMethod;
import javax.jws.WebService;
import javax.jws.*;
import javax.jws.soap.SOAPBinding;
import javax.xml.ws.Endpoint;
@WebService
public class Example25 {
private String message = new String("Hello, ");
public String sayHello(){
return message + "Dipin" + ".";
public static void main(String []args){
String endpointUri = "http://localhost:9090/";
Endpoint.publish(endpointUri, new Example25());
//System.out.println("Service started at: " + endpointUri);
}***********Here is the Java version I am using. ******************
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:\Documents and Settings\Administrator>java -version
java version "1.6.0_07"
Java(TM) SE Runtime Environment (build 1.6.0_07-b06)
Java HotSpot(TM) Client VM (build 10.0-b23, mixed mode)
C:\Documents and Settings\Administrator>
**********Here is my Classpath Setting***************
;.;C:\Program Files\Java\jre1.6.0_07\lib\ext\QTJava.zip;.;
C:\Program Files\Java\jre1.6.0_07\bin;.;
C:\Program Files\Java\jre1.6.0_07\lib\ext\mail-1.4.1.jar;.;
C:\Program Files\Java\jre1.6.0_07\lib\ext\activation.jar;.;
C:\generodb\antsjdbc\antsjdbc.jar;.;
C:\Program Files\Java\jre1.6.0_07\lib\ext\metro-1_2.jar;.;
C:\Program Files\Java\jre1.6.0_07\lib\ext\JAXWS2.1.5-20081030.jar;.;
C:\Program Files\Java\jre1.6.0_07\lib\ext\jaxws-ri\lib\jaxws-tools.jar;.;
C:\Program Files\Java\jre1.6.0_07\lib\ext\jaxws-ri\lib\*.*;.;
C:\Program Files\Java\JavaEE5\jdk\jre\lib\javaws.jar;.;
**********Java Program compliation and running*************
C:\Documents and Settings\Java Samples\Example25\src>javac Endpoint/Example25.java
C:\Documents and Settings\Java Samples\Example25\src>java Endpoint.Example25
Mar 5, 2009 4:05:49 PM com.sun.xml.ws.model.RuntimeModeler getRequestWrapperClas
s
INFO: Dynamically creating request wrapper Class Endpoint.jaxws.SayHello
Mar 5, 2009 4:05:49 PM com.sun.xml.ws.model.RuntimeModeler getResponseWrapperCla
ss
INFO: Dynamically creating response wrapper bean Class Endpoint.jaxws.SayHelloRe
Sponse
Thanks and Regards,
DipinHi Guys,
Hope you are doing well. I need a bit of help here. I have developed a java application and I am trying to make it a web service. So can you guys help me . Whenever I try "http://localhost:9090/" I keep getting "Web Services No JAX-WS context information available." this message. I have not yet developed a client. So far I am just trying to run it as a service. Below is the code for a sample Java application. I am thinking if I can get this Java program to work then maybe I will be able to get my Java program to work.
package Endpoint;
import javax.jws.WebMethod;
import javax.jws.WebService;
import javax.jws.*;
import javax.jws.soap.SOAPBinding;
import javax.xml.ws.Endpoint;
@WebService
public class Example25 {
private String message = new String("Hello, ");
public String sayHello(){
return message + "Dipin" + ".";
public static void main(String []args){
String endpointUri = "http://localhost:9090/";
Endpoint.publish(endpointUri, new Example25());
//System.out.println("Service started at: " + endpointUri);
}***********Here is the Java version I am using. ******************
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:\Documents and Settings\Administrator>java -version
java version "1.6.0_07"
Java(TM) SE Runtime Environment (build 1.6.0_07-b06)
Java HotSpot(TM) Client VM (build 10.0-b23, mixed mode)
C:\Documents and Settings\Administrator>
**********Here is my Classpath Setting***************
;.;C:\Program Files\Java\jre1.6.0_07\lib\ext\QTJava.zip;.;
C:\Program Files\Java\jre1.6.0_07\bin;.;
C:\Program Files\Java\jre1.6.0_07\lib\ext\mail-1.4.1.jar;.;
C:\Program Files\Java\jre1.6.0_07\lib\ext\activation.jar;.;
C:\generodb\antsjdbc\antsjdbc.jar;.;
C:\Program Files\Java\jre1.6.0_07\lib\ext\metro-1_2.jar;.;
C:\Program Files\Java\jre1.6.0_07\lib\ext\JAXWS2.1.5-20081030.jar;.;
C:\Program Files\Java\jre1.6.0_07\lib\ext\jaxws-ri\lib\jaxws-tools.jar;.;
C:\Program Files\Java\jre1.6.0_07\lib\ext\jaxws-ri\lib\*.*;.;
C:\Program Files\Java\JavaEE5\jdk\jre\lib\javaws.jar;.;
**********Java Program compliation and running*************
C:\Documents and Settings\Java Samples\Example25\src>javac Endpoint/Example25.java
C:\Documents and Settings\Java Samples\Example25\src>java Endpoint.Example25
Mar 5, 2009 4:05:49 PM com.sun.xml.ws.model.RuntimeModeler getRequestWrapperClas
s
INFO: Dynamically creating request wrapper Class Endpoint.jaxws.SayHello
Mar 5, 2009 4:05:49 PM com.sun.xml.ws.model.RuntimeModeler getResponseWrapperCla
ss
INFO: Dynamically creating response wrapper bean Class Endpoint.jaxws.SayHelloRe
Sponse
Thanks and Regards,
Dipin -
Hi,
when I enter channel no 507 to see whats on BT Sport, all I get is 'no information available'. Anyone know why this is suddenly happening? Been fine foir the sevferal weeks since I first started receiving it.How long have you had the Infinity service? I had that for a while, but just as it started getting on my nerves it went right and has been OK ever since.
You can click the white star next to this message if you think it was helpful. -
How to fix "no version information available" error
Hi,
I installed zsce-core from package:
http://aur.archlinux.org/packages.php?ID=38766
and then, I want to install zsce-phpmyadmin from this packge:
http://aur.archlinux.org/packages.php?ID=38769
But I get belew error message:
[william@myarch zsce-phpmyadmin]$ makepkg
file: could not find any magic files!
==> Making package: zsce-phpmyadmin 3.4.7.1-1 (Mon Sep 17 10:48:34 PDT 2012)
==> Checking runtime dependencies...
pacman: /opt/zend/lib/libcurl.so.4: no version information available (required by /usr/lib/libalpm.so.7)
==> Checking buildtime dependencies...
==> Retrieving Sources...
-> Downloading phpMyAdmin-3.4.7.1-all-languages.tar.gz...
/usr/bin/curl: /opt/zend/lib/libcurl.so.4: no version information available (required by /usr/bin/curl)
curl: (2) Failed initialization
==> ERROR: Failure while downloading phpMyAdmin-3.4.7.1-all-languages.tar.gz
Aborting...
But, my curl has version:
[william@myarch zsce-phpmyadmin]$ pacman -Qi curl
pacman: /opt/zend/lib/libcurl.so.4: no version information available (required by /usr/lib/libalpm.so.7)
Name : curl
Version : 7.27.0-1
URL : http://curl.haxx.se
Licenses : MIT
Groups : None
Provides : None
Depends On : ca-certificates libssh2 openssl zlib
Optional Deps : None
Required By : flashplugin liboauth libofa libquvi libquvi-scripts
pacman raptor
Conflicts With : None
Replaces : None
Installed Size : 1880.00 KiB
Packager : Dave Reisner <[email protected]>
Architecture : x86_64
Build Date : Fri 27 Jul 2012 02:42:01 PM PDT
Install Date : Mon 17 Sep 2012 11:12:09 AM PDT
Install Reason : Installed as a dependency for another package
Install Script : No
Description : An URL retrival utility and library
How can I fix this problem?
Thank you!
Last edited by williamh (2012-09-17 18:50:19)file: could not find any magic files!
That suggests something is wrong with the file package from [core]
/usr/bin/curl: /opt/zend/lib/libcurl.so.4: no version information available (required by /usr/bin/curl)
same for the curl package .
Chances are the zsce-core pacakge (which is outdated since jan 2012) messed things up, i recommend removing it and reinstall file and curl from repos .
After that, try to build another aur package that's not outdated to see if makepkg works normally .
Last edited by Lone_Wolf (2012-09-17 23:44:01) -
No JAX-RPC Context Information Available
Hello
I am new to java and webservice.
I am using jdk1.4.2 and jwsdp1.2 and tomcat 4.1.27
I have problems in running ant so i manually ran wscompile, wsdeploy to create and deploy a war file. when i put the war file in the webapps directory of tomcat(attached with jwsdp) it unpacks and when i browse the url http://localhost:8080/hello-jaxrpc/hello i get the error
"No JAX-RPC Context Information Available"
When i tried to deploy the war file in tomcat4.1.27 standalone server it unpacked the file but when i browsed the url it returned 404.
What could be the problem? Please help
Thanks in advance
ShivaI would encourage you to use the tomcat which comes
packaged with jwsdp1.2
I seems to me that context name that you are using
in your URL does not match the context used by your
desired endpoint. So you need to ensure that thisis
correct. -
Ifconfig information available
I have no problem, but I'm curious about the information available through ifconfig in terminal. When I input the command, I get the following result:
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
inet 127.0.0.1 netmask 0xff000000
inet6 ::1 prefixlen 128
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
stf0: flags=0 mtu 1280
en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
ether 00:14:51:2b:4f:10
media: autoselect (none) status: inactive
supported media: none autoselect 10baseT/UTP <half-duplex> 10baseT/UTP <full-duplex> 10baseT/UTP <full-duplex,flow-control> 10baseT/UTP <full-duplex,hw-loopback> 100baseTX <half-duplex> 100baseTX <full-duplex> 100baseTX <full-duplex,flow-control> 100baseTX <full-duplex,hw-loopback> 1000baseT <full-duplex> 1000baseT <full-duplex,flow-control> 1000baseT <full-duplex,hw-loopback>
fw0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 4078
lladdr 00:14:51:ff:fe:2b:4f:10
media: autoselect <full-duplex> status: inactive
supported media: autoselect <full-duplex>
en1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet6 fe80::214:51ff:fe7b:50eb%en1 prefixlen 64 scopeid 0x6
inet 10.0.1.2 netmask 0xffffff00 broadcast 10.0.1.255
ether 00:14:51:7b:50:eb
media: autoselect status: active
supported media: autoselect
I wondered if anyone might take a moment to explain all this to me. I don't mean everything; I'm primarily interested in understanding the local and external IP address and the MAC address as they are located in this jumble. Anything else important as well.
thank youOK, I understand.
regarding your ssh connection to your parents house.
You need to configure your parents mac with a fixed local IP address. then configure their router to forward tcp port 22 to the IP address of the emac.
You would need an account on their emac.
It is unlikely that your parents ISP give them a static public IP address so you need to look into http://dyndns.com
a dynamic domain name will update every time your parents IP address changes.
So you would register something like parentsemac.dyndns.org
it is free.
Then you install a dydns client on the emac or there may be a dyndns client inside their router.
Once all that is done, install Vine Server on the emac, configure it as as startup item. use port 5900
Then using ssh you can create a tunnel
ssh -L 5901:localhost:5900 parentsemac.dyndns.org
Then using a vnc client such as jollysfast vnc client
you could connect from your mac at home using the vnc client and a server address of localhost:5901
Then you would have control of their screen. -
Wireshark libnl - no version information available
Hello,
I have a problem with wireshark(gtk). When I try to run it I get some messages:
wireshark: /usr/lib/libnl-genl-3.so.200: no version information available (required by wireshark)
wireshark: /usr/lib/libnl-route-3.so.200: no version information available (required by wireshark)
wireshark: /usr/lib/libnl-3.so.200: no version information available (required by wireshark)
what causes that wireshark don't see any interfaces.
Additional info:
I run wireshark as normal user (added to wireshark group)
had some problems with missing libgcrypt, solved it and now - ldd /usr/bin/wireshark shows:
# ldd /usr/bin/wireshark
/usr/bin/wireshark: /usr/lib/libnl-genl-3.so.200: no version information available (required by /usr/bin/wireshark)
/usr/bin/wireshark: /usr/lib/libnl-route-3.so.200: no version information available (required by /usr/bin/wireshark)
/usr/bin/wireshark: /usr/lib/libnl-3.so.200: no version information available (required by /usr/bin/wireshark)
linux-vdso.so.1 (0x00007fff1b3fe000)
libwiretap.so.3 => /usr/lib/libwiretap.so.3 (0x00007f334e8ba000)
libwireshark.so.3 => /usr/lib/libwireshark.so.3 (0x00007f334a89e000)
libwsutil.so.3 => /usr/lib/libwsutil.so.3 (0x00007f334a697000)
libpcap.so.1 => /usr/lib/libpcap.so.1 (0x00007f334a457000)
libportaudio.so.2 => /usr/lib/libportaudio.so.2 (0x00007f334a228000)
libgtk-3.so.0 => /usr/lib/libgtk-3.so.0 (0x00007f3349b1d000)
libgdk-3.so.0 => /usr/lib/libgdk-3.so.0 (0x00007f334986b000)
libpangocairo-1.0.so.0 => /usr/lib/libpangocairo-1.0.so.0 (0x00007f334965e000)
libpango-1.0.so.0 => /usr/lib/libpango-1.0.so.0 (0x00007f3349413000)
libcairo.so.2 => /usr/lib/libcairo.so.2 (0x00007f33490f1000)
libgdk_pixbuf-2.0.so.0 => /usr/lib/libgdk_pixbuf-2.0.so.0 (0x00007f3348ecd000)
libgobject-2.0.so.0 => /usr/lib/libgobject-2.0.so.0 (0x00007f3348c7c000)
libgmodule-2.0.so.0 => /usr/lib/libgmodule-2.0.so.0 (0x00007f3348a78000)
libglib-2.0.so.0 => /usr/lib/libglib-2.0.so.0 (0x00007f3348778000)
libm.so.6 => /usr/lib/libm.so.6 (0x00007f3348475000)
libz.so.1 => /usr/lib/libz.so.1 (0x00007f334825f000)
libnl-route-3.so.200 => /usr/lib/libnl-route-3.so.200 (0x00007f334800f000)
libnl-genl-3.so.200 => /usr/lib/libnl-genl-3.so.200 (0x00007f3347e09000)
libnl-3.so.200 => /usr/lib/libnl-3.so.200 (0x00007f3347beb000)
libpthread.so.0 => /usr/lib/libpthread.so.0 (0x00007f33479cd000)
libc.so.6 => /usr/lib/libc.so.6 (0x00007f3347622000)
libgthread-2.0.so.0 => /usr/lib/libgthread-2.0.so.0 (0x00007f3347420000)
liblua.so.5.2 => /usr/lib/liblua.so.5.2 (0x00007f33471ee000)
libgcrypt.so.20 => /usr/lib/libgcrypt.so.20 (0x00007f3346f10000)
libgpg-error.so.0 => /usr/lib/libgpg-error.so.0 (0x00007f3346d0b000)
libgnutls.so.28 => /usr/lib/libgnutls.so.28 (0x00007f3346a02000)
libkrb5.so.3 => /usr/lib/libkrb5.so.3 (0x00007f3346724000)
libk5crypto.so.3 => /usr/lib/libk5crypto.so.3 (0x00007f33464ef000)
libcom_err.so.2 => /usr/lib/libcom_err.so.2 (0x00007f33462eb000)
libcrypto.so.1.0.0 => /usr/lib/libcrypto.so.1.0.0 (0x00007f3345ee3000)
libusb-1.0.so.0 => /usr/lib/libusb-1.0.so.0 (0x00007f3345ccc000)
libasound.so.2 => /usr/lib/libasound.so.2 (0x00007f33459d5000)
libjack.so.0 => /usr/lib/libjack.so.0 (0x00007f33457b8000)
librt.so.1 => /usr/lib/librt.so.1 (0x00007f33455b0000)
libX11.so.6 => /usr/lib/libX11.so.6 (0x00007f3345275000)
libXi.so.6 => /usr/lib/libXi.so.6 (0x00007f3345065000)
libXfixes.so.3 => /usr/lib/libXfixes.so.3 (0x00007f3344e5f000)
libcairo-gobject.so.2 => /usr/lib/libcairo-gobject.so.2 (0x00007f334ed35000)
libatk-1.0.so.0 => /usr/lib/libatk-1.0.so.0 (0x00007f3344c3c000)
libatk-bridge-2.0.so.0 => /usr/lib/libatk-bridge-2.0.so.0 (0x00007f3344a11000)
libpangoft2-1.0.so.0 => /usr/lib/libpangoft2-1.0.so.0 (0x00007f33447fc000)
libfontconfig.so.1 => /usr/lib/libfontconfig.so.1 (0x00007f33445c0000)
libgio-2.0.so.0 => /usr/lib/libgio-2.0.so.0 (0x00007f334425e000)
libXinerama.so.1 => /usr/lib/libXinerama.so.1 (0x00007f334405b000)
libXrandr.so.2 => /usr/lib/libXrandr.so.2 (0x00007f3343e51000)
libXcursor.so.1 => /usr/lib/libXcursor.so.1 (0x00007f3343c46000)
libXcomposite.so.1 => /usr/lib/libXcomposite.so.1 (0x00007f3343a43000)
libXdamage.so.1 => /usr/lib/libXdamage.so.1 (0x00007f3343840000)
libwayland-client.so.0 => /usr/lib/libwayland-client.so.0 (0x00007f3343633000)
libxkbcommon.so.0 => /usr/lib/libxkbcommon.so.0 (0x00007f33433d3000)
libwayland-cursor.so.0 => /usr/lib/libwayland-cursor.so.0 (0x00007f33431cb000)
libXext.so.6 => /usr/lib/libXext.so.6 (0x00007f3342fb9000)
libharfbuzz.so.0 => /usr/lib/libharfbuzz.so.0 (0x00007f3342d65000)
libfreetype.so.6 => /usr/lib/libfreetype.so.6 (0x00007f3342ac2000)
libpixman-1.so.0 => /usr/lib/libpixman-1.so.0 (0x00007f3342819000)
libEGL.so.1 => /usr/lib/libEGL.so.1 (0x00007f33425f7000)
libdl.so.2 => /usr/lib/libdl.so.2 (0x00007f33423f3000)
libpng16.so.16 => /usr/lib/libpng16.so.16 (0x00007f33421be000)
libxcb-shm.so.0 => /usr/lib/libxcb-shm.so.0 (0x00007f3341fbb000)
libxcb-render.so.0 => /usr/lib/libxcb-render.so.0 (0x00007f3341db1000)
libxcb.so.1 => /usr/lib/libxcb.so.1 (0x00007f3341b92000)
libXrender.so.1 => /usr/lib/libXrender.so.1 (0x00007f3341988000)
libGL.so.1 => /usr/lib/libGL.so.1 (0x00007f334172a000)
libpcre.so.1 => /usr/lib/libpcre.so.1 (0x00007f33414c4000)
libffi.so.6 => /usr/lib/libffi.so.6 (0x00007f33412bc000)
/lib64/ld-linux-x86-64.so.2 (0x00007f334eb5f000)
libp11-kit.so.0 => /usr/lib/libp11-kit.so.0 (0x00007f334107a000)
libtasn1.so.6 => /usr/lib/libtasn1.so.6 (0x00007f3340e66000)
libnettle.so.4 => /usr/lib/libnettle.so.4 (0x00007f3340c38000)
libhogweed.so.2 => /usr/lib/libhogweed.so.2 (0x00007f3340a09000)
libgmp.so.10 => /usr/lib/libgmp.so.10 (0x00007f3340792000)
libkrb5support.so.0 => /usr/lib/libkrb5support.so.0 (0x00007f3340585000)
libkeyutils.so.1 => /usr/lib/libkeyutils.so.1 (0x00007f3340381000)
libresolv.so.2 => /usr/lib/libresolv.so.2 (0x00007f334016a000)
libudev.so.1 => /usr/lib/libudev.so.1 (0x00007f333ff58000)
libatspi.so.0 => /usr/lib/libatspi.so.0 (0x00007f333fd2b000)
libdbus-1.so.3 => /usr/lib/libdbus-1.so.3 (0x00007f333fae4000)
libexpat.so.1 => /usr/lib/libexpat.so.1 (0x00007f333f8ba000)
libgraphite2.so.3 => /usr/lib/libgraphite2.so.3 (0x00007f333f69e000)
libbz2.so.1.0 => /usr/lib/libbz2.so.1.0 (0x00007f333f48e000)
libX11-xcb.so.1 => /usr/lib/libX11-xcb.so.1 (0x00007f333f28c000)
libxcb-dri2.so.0 => /usr/lib/libxcb-dri2.so.0 (0x00007f333f087000)
libxcb-xfixes.so.0 => /usr/lib/libxcb-xfixes.so.0 (0x00007f333ee80000)
libxcb-shape.so.0 => /usr/lib/libxcb-shape.so.0 (0x00007f333ec7c000)
libgbm.so.1 => /usr/lib/libgbm.so.1 (0x00007f333ea75000)
libwayland-server.so.0 => /usr/lib/libwayland-server.so.0 (0x00007f333e865000)
libglapi.so.0 => /usr/lib/libglapi.so.0 (0x00007f333e63f000)
libdrm.so.2 => /usr/lib/libdrm.so.2 (0x00007f334ed16000)
libXau.so.6 => /usr/lib/libXau.so.6 (0x00007f333e43b000)
libXdmcp.so.6 => /usr/lib/libXdmcp.so.6 (0x00007f333e235000)
libxcb-glx.so.0 => /usr/lib/libxcb-glx.so.0 (0x00007f333e01d000)
libXxf86vm.so.1 => /usr/lib/libXxf86vm.so.1 (0x00007f333de17000)
mayby it is some problem with that:?
# getcap /usr/bin/dumpcap
/usr/bin/dumpcap = cap_net_admin,cap_net_raw+eipHey, i had the same problem!!
Check if stat /lib/libnl-3.so.200 has the following symbolic link value: File: ‘libnl-3.so.200’ -> ‘libnl-3.so.201’. If so, genl and route should point to version 201 as well. I solved this by linking those symbolic links to the correct version:
Make sure you have root permissions:
cd /lib
# rm libnl-3.so.200
# rm libnl-genl-3.so.200
# rm libnl-route-3.so.200
# ln -s libnl-3.so.200.18.0 libnl-3.so.200
# ln -s libnl-genl-3.so.200.18.0 libnl-genl-3.so.200
# ln -s libnl-route-3.so.200.18.0 libnl-route-3.so.200
Cheers, -
How to make Manufacturer Information Available For Display in SC
Hello,
We would like to make the Manufacturer Part Number and External Manufacturer available for display in the shoppng cart. Also, UNSPSC for that matter. I know these are in the shopping cart as loaded from the external catalog but have not found anywhere in the HTML templates where they could be made available by uncommenting, like we did for Unloading Point. Are there provisions in the shopping cart to show this information?
If not, how would you accomplish this?
Thanks in advance for any assistance.Hi
We have done similar requirements in our past previous SRM implementations.
<u>It's not possible to enable the required fields - Manufacturer part number, External Mnaufacturer, UNSPSC, etc as these are not avaibale on the Standard HTML Templates of the Internet Service - BBPSC01 (using SE80 transaction).
You need to go for adding customer fields to the Shopping cart Item level in this case.</u>
Refer the following OSS notes which guides you how to create customer fields on the shopping cart ->
<b>Note 458591 - User-defined fields: Preparation and use
Note 672960 - User-defined fields 2</b>
Refer the following forum links, which will definitely help ->
<b>Custom UI fields on shoping cart
Add custom field in SC -Item Level
Customer field integration
Derive GL code based on UNSPSC from catalog
Custom fields not display in SRM5.5 Basic Data Frame
BBPSC04 Custom Fields Addition Not working
How to chage the display name in SC browser for the custome fields?
<u>You can use several BADIs to map the data from Shopping cart to the Back end documents (Purchase Order, Purchase Req, Requistions, etc) using these Business Add-Ins.</u>
<b>Refer to the BADIs using transaction - SE18.</b>
BBP_DOC_CHANGE_BADI
BBP_DOC_CHECK_BADI
BBP_CREATE_PO_BACK
BBP_CREATE_REQ_BACK
Note -> Please read the relevant Standard BADI definition documentation, before doing any coding for the custom BADI Implementations.
Do let me know, incase you face any issues.
Regards
- Atul -
Is job information available for post scripts to use?
Is there any "meta" information (job name, time run, etc) that is available to be used in pre/post actions? Ideally I want to store the job name in a text file on the host being patched.
Unfortunately the job and task names are not available on the agents
itself, only the JobID and TaskID, which are not helpful.
Only the "time run" of the pre/post action script is available from
the "Task.out" log file.
Example code:
if [ -d /var/opt/SUNWuce ]
then
LOGFILE=`ls -t /var/opt/SUNWuce/agent/logs/*job*/Task.out|head -1`
else
LOGFILE=`ls -t /var/lib/uce/agent/logs/*job*/Task.out|head -1`
fi
TIME_RUN=`head -3 $LOGFILE | tail -1` -
Machine/Host information available to ABAP
Would anyone know how could I find out the specs of the host where an (the current) ABAP program is running?
I know there is the SY-HOST field available to identify the host name, but I couldnt find any other system fields.
I am interested in the following:
1) OS on machine
2) OS version
3) Memory on machine
But most importantly ...
4) The types of CPU (Brand, Model & speed)
Any help would be great! Thanks.Hello Sumit,
If you look at it one way, the solution to your query is quite simple. All the details that you are asking can be found via the menu path System-->Status. Now this menu is there virtually on every screen in SAP. So one would like to think that there ought to be a Function Module for that!! Now if you debug for a few seconds, you will find that the FM is <b>STATUS_ANZEIGEN</b>.
Of course this FM will have a screen which would be used to display the information. What you need to look at is the code of the FM other than the call to the screen. Just try this piece out.
DATA: BEGIN OF VERSION_INFO OCCURS 0,
LINE(80),
END OF VERSION_INFO.
CALL 'SAPCORE' ID 'ID' FIELD 'VERSION'
ID 'TABLE' FIELD VERSION_INFO-*SYS*.
loop at version_info.
write : / version_info.
endloop.
Now just don't ask me to explain you the call to the C-Function. It's a secret !!:-)
Have fun. And get back if you have trouble.
Regards,
Anand Mandalika. -
No Programme Information Available
When I use the TV Guide button the channels are listed but all show NO Programme Information so I don't know whats on any channel !. If I select a channel it shows Fri 19 Nov No Programme Information. Help !!
I have tried scanning channels again but that doesn't work either.@dianebird and rubble2
Press the BT Vision button on the remote
Scroll right to settings and press select
Scroll down to System Information and press select
Scroll right to Network Info
On the page now displayed does it say IPTV Status: Connected OR Disconnected?
Keep pressing back to go back to the TV channel
a)If it displays connected - Leave the box switched on and remove the plug for the Vbox, wait about 10 seconds and replace it. Allow the box to reboot. Wait about 5 mins and see if the TV Guide reappears.
b)If it displays disconnected - If you are using Powerline Adapters, check both to make sure each unit show green lights. If not try resetting them. If it's only by an Ethernet cable, make sure it's plugged in firmly or try another one. Once the status shows connected using the method above, power it down as shown above (a).
-+-No longer a forum member-+- -
7975 user guide is not available
Hi,
We are running UCM 5.1.3 cluster.
We are not able to find 7975 IP Phone user Guide:(it shows http error)
https://x.x.x.x:8443/PhoneGuides/locales/en_us/PhoneOnlineGuide/7975/75sccp.pdf
Please let me know how to upload the user guide.
Regards,Hi Steve,
Sure sounds like a bug to me. What CUCM Version are you running? There is a similar bug in 5.1(x) for 7941/7961 and other Locales.
CSCsi56192 Bug Details
FRA: ITA: DEU: User guide for 7941/7961 phones not found
Symptom:
German, French and Italian user guides for 7961/41 not downloadable from user web page.
getting following error:
HTTP status 404
The requested resource (/phoneguides/locales/de_de/phoneonlineguide/7961/6141sccp.pdf) is not available.
Conditions:
CCM 5.1.1 with following locale installed:
cm-locale-combined_network-5.1.1.0-1.cop
cm-locale-de_DE-5.1.1.0-1012.cop
cm-locale-fr_FR-5.1.1.0-1.cop
cm-locale-it_IT-5.1.1.0-1.cop
Workaround:
user can change the URL with following:
https://x.x.x.x/PhoneGuides/locales/fr_fr/7961/6141sccp.pdf
It will bring up the corresponding user guide for the language selected.
or you can use the online help guide from Cisco.com :
http://www.cisco.com/univercd/cc/td/doc/product/voice/c_ipphon/index.htm
Status
Fixed
Severity
3 - moderate
Last Modified
Any Time
Product
Cisco Unified Communications Manager (CallManager)
Technology
1st Found-In
5.1(1)
Fixed-In
Release-Pending
Hope this helps!
Rob -
FCE 4 still does not start! Now more information available
Hello,
last week I bought FCE 4 and installed it. That was no problem, but then I started it and it began to start, which means a little window with some information being loaded is shown, next is the top with the menu can be seen and then-there is nothing but my desktop!! What's that??? I need to work with it!
What's wrong? I've deinstalled it, my shop assistant advised me to put the FCE User Data in the trash, but it did not help. What can I do? Help, please!!!!
-Till now I've tried the following: Deinstalling completely, trashed the preferences, newly installed by the help of pacifist-programme. All this did not help. Below something which I hope it can help you analyzing the problem. I don't know enough of that stuff....only want to use FCE.......
26.10.10 23:31:40 [0x0-0x19019].com.apple.FinalCutExpress[266] objc[266]: Class NSLabelViewCell is implemented in both /System/Library/Frameworks/AppKit.framework/Versions/C/AppKit and /System/Library/PrivateFrameworks/ProKit.framework/Versions/A/ProKit. One of the two will be used. Which one is undefined.
26.10.10 23:34:14 de.novamedia.nmnetmgrd[32] NMIfNet: Operation not supported on socket
26.10.10 23:34:14 de.novamedia.nmnetmgrd[32] NMIfNet: Invalid argument
26.10.10 23:34:14 de.novamedia.nmnetmgrd[32] NMIfNet: Device not configured
26.10.10 23:34:14 de.novamedia.nmnetmgrd[32] NMIfNet: Device not configured
Thanks,
KnödelAre you using the G4 or another computer? According to the tech specs, FCE4 needs a 1.25GHz processor at minimum to run.
http://www.apple.com/finalcutexpress/specs.html -
App Store information available to apps?
Is there anything that an application bought from the App Store will know about itself? For example:
- Date of purchase?
- Unique identifier to distinguish this copy of the application from other copies bought by other people?
Since the App Store doesn't exist yet, it is possible that there is no answer to this question. On the other hand, there may just be a document hanging around somewhere that I haven't found a link to - or someone in this forum may have heard something...I don't believe that the app will know anything about the App Store, when it was bought, etc. But if you're looking for a unique identifier, there is a uniqueIdentifier property in UIDevice. That is guaranteed to be unique, and works well as a key in a DB to store information about when the client last downloaded data, etc. It's also rather likely that this will be how you address phones through the coming push service.
Maybe you are looking for
-
Issues while sending automatic email from job scheduled via sm36
Dear basis guys, We are on Netweaver 2004s, ERP 6 . I am scheduling (in SM36) a standard report output as background job, send its output to a pdf device and send this pdf automatically to email address. Everything is working fine except that I am no
-
What keyscrambler softward is the upgraded version of Mozilla compatible with? My QFX is now no longer working since the update. Many thanks jian
-
Is there a maximum song length for the iPhone?
I have an audio bible that works fine in iTunes, my 20GB & 30GB iPods. However it will not play on my iPhone.
-
I am having star schema,Fact1 and dim1,dim2,dim3 Now i am bringing one more fact table(fact2)..... common table between both fact i hav currency column like AED,INR,USD,other thn this i dont hav any common table to join with other dimension table so
-
Best way to have multiple arrangements in one project file?
Hello everybody, I am trying to figure out a smart way of having multiple arrangements associated with one project. More importantly, this would allow me to have multiple arrangements associated with the same pool of audio files in one audio window -