TV Guide on-Screen not working over-the-air

Just recently revived a 42HL196 (see thread "Red light flashing on 42L196"), the first TV I've repaired that features TVGuide On Screen. I was all excited about this until reading on the web that Rovi, the owner company of TVGuide service, phased out over-the-air (antenna) transmission of TV Guide data earlier this year. This explains the fact that even with the set programmed for antenna service and connected to AC over the last couple of weeks, the TV Guide function shows "in progress" for everything but the time setting, which I had set manually. Rovi will supposedly also phase out the cable based service, leaving only the web based TV Guide, which of course, requires an internet connected TV.
So here's the question; any other 42HL196 owners out there using over-the-air (antenna) notice the loss of TV Guide, and if so, have you contacted Toshiba support about it? I submitted an email request but their reply was that I should phone their support number. Before going that route, I'm checking this forum for any owners that may already have dealt with this. It doesn't help that the user manual for this set says next to nothing about TV Guide on Screen; some other Toshiba TVs with this feature appear to have a full section in their manuals covering it, but not this one. The set has version 37 software and I don't know if this is the latest. Since this TV has a network connection, I was sorta hoping that maybe there is a software update that would make the TV retrieve TV Guide data over the internet rather than from the antenna/cable input.

Those drivers are crap.Try other drivers.

Similar Messages

Amber Update not Available Over-the-Air - Nokia Lu...

What the hell is going on, amber is not available on the air for 720 in India, all the owners are rushing at care centre because it is not available over the air till now , it is available since 2days , for indian devices , make it available over the air , or go to hell, its not fair
RM 885
please help , other vise all the users will move to alternative mobiles
Moderator's Note: This post was edited out. The software/tool mentioned was removed. Discussion of such is not allowed on the forum.
Solved!
Go to Solution.

If the update is on the Nokia servers that does not mean it is ready and available to end users for the OTA update. While a Nokia Care Point could flash it for you that will also wipe the device.
Click on the blue Star Icon below if my advice has helped you or press the 'Accept As Solution' link if I solved your problem..

Please Help! RDS not working over the internet

Hello Everyone,
I recently set up a new server that is running Server 2008 R2 and need to get RDS setup so that I can connect to the server using a remote desktop connection over the internet.
I can access the web access site over the internet and login as expected but it does not allow me to connect via remote desktop to the server using its FQDN. It just gives me the typical can't connect message. I have verified that connecting via remote desktop
using the RDS web access site works within my local network.
So far I have done the following:
- Added the server to the domain and assigned a static IP address that is public on the internet (associated dns record also added by my ISP)
- Added all of the RDS roles except for virtualization host and added appropriate settings throughout the wizard
- Configured and added a self-signed ssl cert
- Added the server as a web access server
- Disabled Firewall and Security software on the server for testing purposes
That said, can anybody shed some light on what I may have missed? When entering the computer name over the internet, do I have to add a port or anything like that? It's odd that I can connected to the web access page which is hosted on the server I am trying
to connect to via remote desktop but I cannot actually use remote desktop.
This is my first time attempting to use RDS so maybe I just missed an important step somewhere.
Any help with this would be greatly appreciated!

I added the certificate to the PC I'm trying to connect from and I'm still getting the same error.
This is what I'm seeing below, I figure pictures speak louder than words in this case.
Under the Remote Desktop link:
Connect to:
Remote Desktop size:
Options
Devices and resources (followed by checkboxes for them)
Additional Options
Remote computer sounds:
Apply keyboard shortcuts:
Performance:
When I click connect a warning comes up saying unknown publisher and when I click connect I get the error again.
That said, I went into RD Session Host Server Settings and under the RD Session Host Server tab I checked a box that says "Show a remote desktop connection to this RD Session Host server in RD Web Access" and now under the
remoteapp programs link on the RDWeb there is an icon for Remote Desktop. When I click the icon it automatically tried to connect me to the server and lists the publisher and remote computer as the same rather than giving me a warning.
Additionally, in the RD Session Host Server Settings it does say the server name as the FQDN RDP port 3389 under "connection settings" in the same tab.
edit: I am going to put together some pictures so you can see exactly what I'm seeing on the RDWeb and will post again with a link once I have them up.

Iphone5 screen not working to the touch off and on? Anyone else having this problem? Thanx

My new iphone5 is freezing up when I try to end a call-- screen goes black and will not let me hit "end" a
also while browsing the web-- won't let me tap on anything in a website-- all occasionally -- tried hard setting it and turning it off and on--any suggestions? Thank you.

Same problem just experienced, But in general the touch screen is not as good as iphone 4. Does anyone know whether we should seek for repair or just cope with it by swiching off and on?

IPhone Calendar not syncing over the air

My iCal calendars won't sync with my iPhone as of a few days ago after I did a reset. I have tried the following to fix it:
1. Deregistering the computer from Mobile me
2. Resetting sync history in Mobile Me
3. Resetting sync history in iSync
4. Deleting the mobile me account from the iPhone and re-adding it
5. Setting up a test account which was able to sync fine with the iPhone
6. I also tried adding my wife's mobile me account to my iphone and sync'd her calendars and they sync'd fine to my iphone
7. I used her iPhone and added my mobile me account to her iPhone and my calendars sync'd fine to her iPhone
The problem seems to be specific to my mobile me account and my iPhone. Basically the calendars don't sync at all so currently I have nothing but the default calendars on my iPhone. The contacts and bookmarks sync fine.
Any ideas for what I could try to fix?

Hey Lynda Jo,
That is not very productive when the calendars are not syncing. I am not sure what troubleshooting you have done on your end but let’s start with the first article below to get it sorted out. It will have you check the settings even though you have not changed anything, it may be a good idea to double check. If all looks good after that troubleshooting, then the second article will be your follow up to get it working again.
iCloud: Troubleshooting iCloud Calendar
http://support.apple.com/en-us/HT203521
iCloud: Advanced Calendar and iCal troubleshooting
http://support.apple.com/en-us/TS4337
Take care,
-Norm G.

Contacts and calendar do not sync over the air

if turn on in iPhone settings the info dissappear. I'm perform the instrucctions step by step but after sync with itunes the info appear ok when pass to the last step in the instructions to perform the settings on the iPhone, the info is dissapeared.
What I'm doing bad and how to resolve it?

yes, and I'm check it in the web and
It have the correct info. The problem
Is only in the iphone.
Thanks for your help!!!

Outlook 2010 won't sync over the air with my iPhone 4s

I got my iphone 4s at the same time that my work switched to Outlook 2010. Now I can only sync calendars manually and not automatically over the air as I enter appointments. Plus, only appointments entered on the PC will sync with the phone - appointments entered on the phone won't sync with my work calendar at all. What's going on??? I don't know if it's a phone issue or an Outlook 2010 issue, since both changed at the same time. I did notice that new appointments typed on my phone are a different color than those entered on my PC, if that matters at all (it may just be a new feature of ios5).

Hi there miperrito42!
I have an article here that can help you troubleshoot iTunes Wi-Fi syncing:
iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi Syncing
http://support.apple.com/kb/TS4062
Take care, and thanks for visiting the Apple Support Communities.
-Braden

Cached credentials are not working on the lock screen (Windows 7)

Hello all,
We are having a difficult time trying to troubleshoot a problem with credential caching seemingly not working on the lock screen for our laptop users. Users are instructed to logon to the laptop while connected to the domain to cache their credentials. The
user then leaves the network, and is able to log in to the laptop using cached credentials. The laptop locks either due to a manual lock, or due to an inactivity timer. The user tries to relog and is presented with the error “no logon servers available to
service the request.” Users are reporting the problem from both home and public networks. We have been able to recreate the issue by logging on the laptop while in the office and setting our internal wireless network to manually connect, and then simply clicking
start > shutdown arrow > lock. Many users have reported that they were able to get back into the laptop after a hard shut down, but would be unable to log in again if they returned to the lock screen. One user has reported that selecting other credentials
> switch user > other user while on the lock screen and then entering in his DC credentials would allow him to get back into the laptop. I was unable to recreate this workaround on our test machine. I also tried to logon using the switch user account
with the “.\username” method to see if that would look for cached credentials. One user has reported that he was unable to hard shut down the computer to get back in. He also reported that he tried to pull the battery and give it time before trying again.
We have set the value for “Interactive logon: Number of previous logons to cache” to 50. The status of “Interactive Logon: Require Domain Controller to unlock workstation” is disabled. We have tried to turn the Wi-Fi switch off and then back on while on
the lock screen. Error logs that we think are related to the problem include – Event ID:5719, NETLOGON and Event ID:4343, NlaSvc error 0x4C6 and error 0x51
I have a slightly sinking feeling it has something to do with NLA thinking that they are connected to a domain while on the lock screen, but this is pure speculation. Thanks for reading my post and any potential solutions are greatly appreciated!

I'd try them over here.
Windows IT Pro forums on TechNet
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

Mac book is not working. The logo is there and the sound but the circle keeps spinning. Can only bring up the utlities screen.

My mac book is not working. The sound is there and the logo on start up. The dial keeps spinning and never stops. I can only bring up the utilities screen and then I am stuck. PLEA

Try the tips here:
Get help with the slot-loading SuperDrive on your Mac computer - Apple Support
Especially holding the trackpad mouse button upon restart and resetting the SMC.
If it's stuck in there you might have to make a "guide" out of two thin pieces of plastic. Post back if that's the case.

I just bought an Iphone4 from straight talk and my camera does not work. The shutter wont open and when it does open there is a black screen. I am very upset. I have wanted this phone for awhile and now that I have it, it does not work properly. Need help

I just bought an Iphone 4 from straight talk. My camera does not work. The shutter does not open and when it does open there is a black screen. I am very upset. I have wanted this phone for awhile. I want the issue fixed.
Thanks

Take the iPhone to an Apple store genius bar for testing, and if it is defective and under warranty they will replace. Since you say iPhone 4, was this a used or refurbished iPhone?

To whom it may concern Hi my name is Silvana Pires,I purchased an I Phone 4 S Model A 1387 EMC 2430 SCC.ID DCG E 2430 AIC.579 C-E 243 A in California one year ago,Unfortunately its Not working well the screen is getting black,and the phone is in goo

To whom it may concern
Hi my name is Silvana Pires,I purchased an I Phone 4 S Model A 1387 EMC 2430 SCC.ID DCG E
2430 AIC.579 C-E 243 A in California one year ago,Unfortunately its Not working well the screen is getting black,and the phone is in good shape I can prove it,the Apple support in Brazil doenst work like in USA.
I look forward to your reply and a resolution of this problem.
Thank you very much!!!

You are welcome. I'm glad you got it back up.
(1) You say you did the symbolic link. I will assume this is set correctly; it's very important that it is.
(2) I don't know what you mean by "Been feeding the [email protected] for several weeks now, 700 emails each day at least." After the initial training period, SpamAssassin doesn't learn from mail it has already processed correctly. At this point, you only need to teach SpamAssassin when it is wrong. [email protected] should only be getting spam that is being passed as clean. Likewise, [email protected] should only be getting legitimate mail that is being flagged as junk. You are redirecting mail to both [email protected] and [email protected] ... right? SpamAssassin needs both.
(3) Next, as I said before, you need to implement those "Frontline spam defense for Mac OS X Server." Once you have that done and issue "postfix reload" you can look at your SMTP log in Server Admin and watch as Postfix blocks one piece of junk mail after another. It's kind of cool.
(4) Add some SARE rules:
Visit http://www.rulesemporium.com/rules.htm and download the following rules:
70sareadult.cf
70saregenlsubj0.cf
70sareheader0.cf
70sarehtml0.cf
70sareobfu0.cf
70sareoem.cf
70sarespoof.cf
70sarestocks.cf
70sareunsub.cf
72sare_redirectpost
Visit http://www.rulesemporium.com/other-rules.htm and download the following rules:
backhair.cf
bogus-virus-warnings.cf
chickenpox.cf
weeds.cf
Copy these rules to /etc/mail/spamassassin/
Then stop and restart mail services.
There are other things you can do, and you'll find differing opinions about such things. In general, I think implementing the "Frontline spam defense for Mac OS X Server" and adding the SARE rules will help a lot. Good luck!

I have a mac which plays the boot sound but the screen stays black. Recovery mode does not work, as the keyboard is wireless. What do I do?

What it says in the title.
I have an older mac and it worked perfectly until about an hour ago when I shut it down because we needed the room dark for a presentation and the screen saver was putting out light.
Now it won't turn back on. It plays the start up music but the screen stays blank.
The CMD+OPT+R for recovery mode doesn't do anything, the keyboard is wireless so the command doesn't get to the computer and that's the only keyboard I have since that's the one it came with.
I'm looking at making a USB recovery disk but it says that I should click on "Options" in the Disk Utility but there is no options button or menu to click.
From here: OS X: About Recovery Disk Assistant in step 3 I get stuck.
Also it says that if I make a drive on this computer which has an older OS it might not work on the broken machine with Mavericks.
This machine literally worked and I turned it off and now it does not work and there seems to be nothing I can do... ***...

kodemage wrote:
well, then recovery mode does not work. I've tried all the key combinations I've seen on line. Command+R, Command+Option+R, Command+Option+P+R, none of these work.
I don't believe there is anything we can do on a forum to help then, you need to take it into a AASP and have it professionaly diagnosed. If you don't know how to locate an AASP in your area you can begin by using Contact Apple for support and service
Good luck.

Reset not working on iPad Air. I just bought this iPad Air from an individaual. It was listed as new and came with the box, charger, and guide. The seller said it was jail broken and I told him I did not want it jail broken and he said he would reset

He said he would reset it to factory and I said ok I would purchase it. He supposedly received it as a gift from his business and already had one. Well it all looks in new condition and powers up and down ok, and connected to WIFI when I checked it out at Starbucks. SIRI worked, Safari and the camers worked so I took it. Nothing was on the screen but standard app symbols you see on a new iPad. I compared it to a display at a store.
Well when I got it home I plugged it into my computer and it asked me to trust and I said yes ond on the Air it asked to ok it and I did. Then I tried to go to App store and it came up and asked for the password for a Apple ID. Of course I did not have it. I then tried to do a reset. I went to Settings and did a reset erase everything. It asked me twice if I wanted to reset as it was not recoverable. I said yes. It did not ask for and Apple ID or password. The Air reset started and the Apple logo came up and a bar started to move arcoss under it. It almost became a full bar when the screen went blank and the little small rotating symbol came up. It just kept rotating and never finished. Had to do a hard reset holding the Home and Sleep button for 10 seconds and the the Air came back. Everything is working on the Air except I can not get it to reset and link it up to my computer itunes.
It is on IOS 7.0.4
I hope I am not out my $475. Any help would be appreciated. Any options or suggestions.
Thanks.

You need to return it to the seller and get your money back. You cannot reset or use the device with another AppleID installed unless you know the password for that ID.
If the device has been jailbroken, no one on here can give you any further help...the Terms of Use prohibit us from doing so.

My back button does not work because the prior screen does not appear in the history. I therefore must go back to the blue screen and reload safari. Apple tech support could not help. Can anyone else help?

After I installed mountain lion my back button frequently does not work because the prior screen does not appear iunder History. Apple tech support was not able to fix the problem. Does anyone have any suggestions?

lbryan1987 wrote:
I dont want the button problem solved i need to know how to restore the phone without using that button or going into settings
You don't in the condition it's in. You will either have to get the phone replaced by Apple or pay a 3rd party to repair it.
there seriously should be more than two ways to solve this other wise apple is useless and we will never buy another apple product.
Seriously? It's physically broken!

My imac is not working well, the screen is flashing.I can´t open any program.there is a monsterflashing

my imac is not working well, the screen is flashing.I can´t open any program.there is a monsterflashing

Hello,
One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for problem in Safe Mode...
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
Reboot, test again.
If it only does it in Regular Boot, then it could be some hardware problem like Video card, (Quartz is turned off in Safe Mode), or Airport, or some USB or Firewire device, or 3rd party add-on, Check System Preferences>Accounts>Login Items window to see if it or something relevant is listed.
Check the System Preferences>Other Row, for 3rd party Pref Panes.
Also look in these if they exist, some are invisible...
/private/var/run/StartupItems
/Library/StartupItems
/System/Library/StartupItems
/System/Library/LaunchDaemons
/Library/LaunchDaemons

TV Guide on-Screen not working over-the-air

Similar Messages

Maybe you are looking for