TV in has no color on ti4400

Everything on this card works fine. But when i try the tv in on my camcorder its not in color. Im using the  Intervideo winproducer that came with the card with a COLOR sony camcorder. Any ideas?

check the wincoder input settings
Setup --> Record -->video
is it on composite?  if you are using a s-video cable make sure it is set to s-video.  This is more than likely your problem

Similar Messages

  • My Adobe Flash CS6 Color Picker has ODD colors. I'm using Mac Mini OSX 10.8.1. Is there a fix?

    My Adobe Flash CS6 Color Picker has ODD colors. I'm using Mac Mini OSX 10.8.1. Is there a fix?
    I click on the color picker and where I have seen the normal #0000ff blue color on my windows computer, this mac Mountain lion version shows a purple-ish color. Oddly, If I enter the hex # into the color picker, and use it as a fill, the correct color displays on the stage but when i use the eyedropper on that color, it shows it as the purple color again on the toolbar.
    I've seen a similar thing like this happen when using adobe photoshop. However, the usual solution is to just make the managed color profile set to monitor RGB. The only downside with Flash is there is no preference to set that. The color palette in Adobe Photoshop displays as it should with the correct blue.
    I should also note that I'm using a Samsung 941bw monitor with my mac mini which could also be part of the problem.
    I figured i'd make this post anyway just in case it's the OS & Adobe Flash CS6 and not the monitor.
    I've included a screenshot as well that shows that i've chosen the purple color and then made a rectangle shape on the stage and it comes out blue.
    Thanks ahead for your response(s)
    -Line

    Seems misleading that on the adobe site for Adobe Flash CS6 it says:
    System requirements:
    Mac OS X v10.6.8 or v10.7. Adobe Creative Suite 5, CS5.5, and CS6 applications support Mac OS X Mountain Lion (v10.8) when installed on Intel based systems.**

  • HP C7250 has all colors of ink but won't print in color

    My HP C7250 shows that all ink levels are OK on the display, but it won't print in color becasue it says tht the Cyan cartridge is low. I recently replaced the Cyan cartidge with a new one and the display shows that the ink level is full, but when i go to print I get a message that the ink level for Cyan is still low.
    The printer is out of warranty. Anyone have an idea of how i can get this printer to print in color again?
    I have tried reinstalling the catridge, and the same thing happens.

    I know this was a while ago, but did you resolve it easily?  Mine has full colors, including cyan at 80%.  It won't use the cyan for color printing at all, so all the colors are off.  I think I have to chagne teh printhead since I've already cleaned them and changed the ink cartridge.  Just curious.  Thanks.

  • IPhone 3Gs has a color temperature display is warmer, or yellow-tinted

    All greetings!
    My new iPhone 3Gs has a color temperature display is much warmer, or yellow-tinted compared to the my iPhone 3G.
    It is a defect of my iPhone 3Gs?
    Here you can see it: http://farm3.static.flickr.com/2415/2660565874_ef8a841a20.jpg

    I recently bought a 3Gs and compared to my old 3G there's a hug difference! my 3Gs looks really yellow! I went to Apple store at the florida mall to verify if this was normal, brought my old 3G with me so they could notice the difference,so I made the appointment and when the so called "apple genius" saw my phone he noticed the difference and took my phone to change it to the back of the store, he came back in 3 minutes claiming that he changed my phone,when I looked at it,same yellow display I said to the guy that the display looks the same but he never gave me any other option, on my way out from the store i checked the info on the phone but it was the same IMEI as the one in the box, how could this be? if they supposedly change the phone, I asked to speak to a manager and explained to her my situation, the "genius" that "helped me" told the manager that what he did was only changing the display and since I didn't like it,he went back and put back again the display that came with the phone... at this point I got really upset and I asked the manager to speak to the "genius" and asked why he lied about the situation, the manager said that she would bring the guy so we could settle this situation,they left me waiting on the store 45 minutes and none of them showed up... Great Apple store service... Yeah right!! F#$%^ them!

  • My ipad has multi-colored lines on it how do i fix it?

    My iPad Mini has mutli-colored lines across it how do i fix it? i tried turning it on n off i restored it but nothing will work

    You can't fix it.  You need to make a reservation at the Genius Bar at the nearest Apple Store.   Use the link below to find one near you.  Before attending the reservation you should create a backup of the device.  You can use iTunes but ICloud should prove more convenient.
    http://www.apple.com/retail/locator/

  • Every time i put a clip into the timeline it crashes and just has the color wheel i have to force quit the program.

    I just downloaded the trial to see if I wanted to buy instead of using Adobe Premiere.  Every time i put a clip into the timeline it crashes and just has the color wheel i have to force quit the program.  I tried deleting the program and reinstalling it. Please help. Here are my specs
    2.3 GHz Intel Core i5
    16 GB 1333 MHz DDR3
    Intel HD Graphics 3000 512 MB
    OS X 10.8.2

    Is this for FCP-X?
    Wrong forum, you need to post here:
    http://discussions.apple.com/community/professional_applications/final_cut_pro_x

  • My black and white printing has a color tint to it. How do I change this?

    It seems like whenever I print anything that is supposed to be just black and white, such as a word document, the black is not a true black--it has a colored tint. I originally thought this was a printer issue and contacted tech support for the printer, but they identified it as a computer issue once we hooked up multiple printers to the iMac and the same thing kept happening. There is no setting I can find in the computer to change this because I don't know what its called. Any help would be appreciated!

    angryantaloupe82 wrote:
    the first printer it did it on was a canon mp460, the second it did it on was an HP 4400 series, the third it is currently doing it on is an HP officejet 4500. I have tried changing the settings in the print dialog box to the b&w or grayscale, it still does the tinted black.
    I had the canon mp180. I have the HP psc 1209 now.  I haven't seen this problem with 10.4.11.
    Curiously, I heard of this problem with some Ubuntu drivers. Turned you their conversion program GhostPrint could only convert to either black or color. The color convert resulted in grey black. It was with an HP printer.  Ubuntu & Mac OS X share some of the same print technology.
    I see you have iMac, Mac OS X (10.4.9).  I suggest you upgrade to 10.4.11.  Pick one of the combo updates referenced on this page:
    http://support.apple.com/kb/TA24901?viewlocale=en_US
    Regardless of the print problem, you should upgrade. Do you have wireless, if so you will need to reconfigure.
    Robert

  • How to copy printed information onto party invitations that has a colorful bordered paper.

    I have a party invitation that has a colorful border with a blank white area in the middle for text.  There are two invitations on a single sheet of paper that is a standard letter size of 8-1/2 by 11.  I have double printed the text I want on a standard letter size piece of paper and tried to copy the text onto the invitation without success.  When trying to print,  I keep getting an error message that says "paper detected does not match paper size or type selected.  I need help in setting up the printer to allow me to copy. Help please!!

    Thank you Sukrit for responding.
    The computer I am using is controlled by a government agency.  They do not allow users to install or modify any software.  The file I am using, though a public document, may not be advisable to be posted online.
    However, my solution to the issue was to reprint the document that I was pasting into and modifying the print settings to rotate the PDF image.  First, I had to change the size of the PDF beyond the original full size dimensions to account for the scale change.  Then change the print settings to print landscape while telling adobe's advanced settings to print portrait.  After some finesse with other settings for scale, I was able to copy and paste the polygon without loosing the scale.  This took me a week to figure out.  An extreme waste of time for such a simple issue that should not occur in such a popular software.

  • My ipad screen has turned color and looks "over-exposed" - help!

    my ipad screen has turned color and looks "over-exposed" - help!

    Settings > General > Accessibility > Invert Colors Off

  • When I open new window browser has inverted color scheme and no window title.

    When I open 1st window in FF top of the page looks usual - like this http://imagestun.com/hosting/kartinki/ff1.jpg
    But when I try to open something in a new window, this new window has strange color scheme at the top and no title, like this
    http://imagestun.com/hosting/kartinki/ff2.jpg
    If I switch from window mode to full screen mode and vice versa everything gets to look normal.
    I've used Classic Theme Reestorer addon, but the same problem occurs when this addon is uninstalled. Restaring computer, reinstalling firefox etc didn't help, I still get these annoying white letters in the main menu when I try to open 2 or more firefox windows.
    Is there any way to fix it?

    Thanks, I followed your advice and disabled everyting then started turning addons one by one. The problem was caused by Hola Unblocker, now everything is ok.

  • My new black iPhone 5 came scratched from the top and the sides!! Its like it has no color!! why? i just opened it from its box!!

    my new black iPhone 5 came scratched from the top and the sides!! Its like it has no color!! why? i just opened it from its box!!

    Return it immediatly.

  • Can't get smart mailboxes to work with "message has flag = color"

    I'm trying to set up a Smart Mailbox that will find all the messages to which I've assigned a green flag.  This should be easy, right?
    Unfortunately, this isn't working -- I definitely have messages with green flags in my inbox, but they're not being collected into the smart mailbox. 
    I've also tried this:
    but it doesn't work either.
    Is this broken in Mavericks?  Am I doing something wrong?

    Re Eric: Arggh -- the first image (which went into the comment form but didn't show up) was of the "create smart mailbox" dropdown, which tested "match all rules: message has flag = green".  The second image tested "match all rules: message is flagged & message has flag = green".
    Re William: I'd like to have one smart mailbox for green flags and another for purple flags.  The colors here were just meant to be examples.

  • Where has the colored fringe removal tool gone in ACR 6.7?

    Having just updated ACR to ver 6.7 (6.7.0.339) I am surprised to find that the colored fringe removal tool in the Lens Correction palette has disappeared. All that there is now is Transform, Lens Vignetting and the relatively useless Defringe.
    I thought updates were supposed to provide enhancements, not remove things. What else has been taken away?
    I use this tool a lot and would like to get it back. If it has been replaced with something supposedly better, then what and where is it? Have I missed something?
    Any advice on this would be appreciated.

    Yes, there is lots of useful information here, and thanks for directing me to it. The claimed improvements to fixing chromatic aberrations in digital cameras, including ability to fix LoCA fringing, are impressive
    However, the article seems to apply only to ACR 7 (which I presume is exclusive to CS6) and LR 4. My question was really about ACR 6.7.0.339 in CS5, which installed via Adobe Updates, during the past week. On my system, this update appears to have removed the manual fringe removal tools in the Lens Correction palette.
    There is nothing about this in the release notes, so has something gone wrong here?
    However I have discovered that my lens is now supported, and that applying the (semi) automatic adjustments via the Lens Profile tab does a reasonable job of fixing chromatic aberrations (as well as geometrical aberrations) and is a lot quicker to use. However the manual tool should still be there to fix problems with unsupported lenses as well as a means of applying finer adjustments, perhaps to selected parts of an image, or to accomodate variations in manufactured lens quality.

  • Stop it from using photo black ink for black text printing and where has the color ink gone?

    My HP Photosmart Prem C310 series all in one is using the Black Photo ink cartridge for text printing instead of the XL Black that I put in it for text printing. How can I get it to use the right cartridge for printing? Also, even though I have NOT printed ANY photo's and very few pages of text the new set of color cartridges I put in it a few months ago are almost empty. Why? How could they be almost empty when I have NOT printed anything in color? This is getting ridiculous replacing ink cartridges every few months WHEN I HAVE NOT BEEN PRINTING ANYTHING!!!
    The set of ink cartridges that came with it lasted for several months. Since then I've gone through two sets in less than a year. That's 3 sets of ink cartridges when I have only printed 3 photo's when I first set it up. And have only used les than a 1/4 of one package of printing paper. I've only put paper in it twice. Each time it was about a 1/4 inch or 3/8 of an inch thick stack of paper in the tray. I've even tried shutting the printer down when its not being used for a long period of time but the ink is still disapearing. Where is it going? Why is it going there? How do I stop it? This is rediculous. I may as well junk the thing even though it still works because I cant aford to keep feeding it ink when its just sitting there doing nothing most of the time.
    Thank you
    This question was solved.
    View Solution.

    I just got another email from HP about this problem wanting to know what I found for a solution to this problem. From all of the suggestions from the HP tec support all of them pretty much kept saying the same thing. That it is my fault that it's using so much ink because I have it on the wrong settings. One tec did slip and say that it doesn't matter what settings you have it on it will always use the Photo Black cartridge for printing plain black text and it doesn't matter if you have a X-Large Black cartridge in it for text printing because it was made to always use the Photo Black for text and even use some of the colors to blend with the black to make it stand out. Why anybody would need this when just printing shipping labels and things like that I don't know.
    Any who, The only solution for this problem is,,,, junk the printer and get a different brand & model of printer. Research it before buying to find out how much ink it wants to waste and if it will still print black text if it only has a black cartridge in it. I was going to get rid of mine by giving it to a friend since they don't have a printer. But since I want to keep him as a friend I decided not to give it to him. Since it cant be traded in for a different one even though it still works, Its going to the target shooting range the next time I go out shooting. Maybe I'll take a few video's clips of it getting blasted to pieces with a Ruger 10-22 .22 cal. rifle with 25 shot clips, a Ruger Mini-14 Ranch Rifle shooting .223 cal with a 30 shot clip, a Chinese SKS 7.62 with a 30 shot clip. And maybe use my Ruger P89 9mm pistol and put a couple 15 round clips of 9mm in it. If there's anything left I'll finish it off with a few 3" magnum loads of #2 steel shot with my 20 gauge shotgun.  Then I think I'll do the same thing to my Westinghouse 46" flat screen HDTV that just died.
       Then maybe I'll come back and post the video's of my "solution to this printers problem". It may not fix the problem, but it will be an entertaining way of getting rid of the problem.

  • XY graph has 'negative colors' when used on PC with XP

    I built an application with windows 2000. I have distributed it. One customer using XP has found that when the XY graph begins to plot the background and gridline colors swap from black to white and visa versa. We have tried our program on an XP machine here, and can not replicate the problem

    This sounds like an issue with the graphics driver on that XP machine. I've seen all kind of weird issues due to driver bugs.
    Is this an older video card? See if there is a new driver available for XP. They might also want to try other display settings e.g. 32bit color, 24bit color, 16bit color.
    Also try to temporarily reduce the graphics acceleration (display control panel..settings..advanced..troubleshooting) by a click or two. Any improvement?
    LabVIEW Champion . Do more with less code and in less time .

Maybe you are looking for