TV Interface for music selection

The slideshows are great and all but I am more interested in navigating the menus via my TV set. In short, is this possible (using one of the RC devices of course)? I've been scouring the net for a few hours now and have found nothing. I hear Denon is putting out a receiver with the aforementioned technology for it retails for near 1500 beans. I think it would be great to be able to sit on your couch and navigate your playlists while viewing a 40 inch plasma as opposed to a 2 inch ipod LCD. Anyone know anything?

This is what I want. I don't even care if I can control it remotely. I just want to be able to see the current tune on the TV. Seems like it has the ability to do it. Just needs to have a little more software. Back when you could only get a hundred CDs on an iPod they were probably all your favorites and you knew them all very well. I will have about 1000 CDs on my iPod, and I don't recognize every track with "Name That Tune" familiarity. Showing the text and artwork on the tube would be an excellent enhancement.

Similar Messages

  • I am using logic to record a podcast and using soundboard to use as a playback for music and sound effects.  I'd like to soft patch sound board into logic, and still use my interface for recording audio from the other members of the podcast.

    I am using logic to record a podcast.  I have a presonus firestudio mobile for my interface so I can record several people at the same time.  I'm also using Soundboard for a playback system for music and sound effects.  I'd like to know how to soft patch Soundboard into Logic while still using the Firestudio interface to record the other members of the podcast.  Does anyone know how to do this? and if so can you tell me how to do it?  Thanks.

    Thanks. Now, since Apple failed to provide an audio in jack for their new and improved iMacs (mine has one), all I can suggest is that you contact AppleCare, since you have 90-dqy free phone support. If need be, you might reconsider your purchase, but that's for you to decide.

  • Integration directory : select IDOC interface for WAS business system

    Hi,
    While adding a receiver determination for an WAS business system, I do not get any IDOC based message interface from the design repository proposed for my business system in the popup dialog.
    The only interfaces that appear are for the non SAP standard SWCV that we added to the business system. But no interface for the APPL 5.0 SWCV ( or BASIS 7.0 ) appears.
    In the SLD this component is correctly listed for that WAS .
    If I remove all the default search criteria , eventually, the in terface appears but after selecting it I get a message saying :
    "Message Interface does not exist in any software components installed on this business system "
    Since everything looks ok in the SLD I'm puzzled. How does this look on other systems ?
    Any ideas
    ( The business system was updated from APPL 4.70 / BASIS 6.40 to APPL 5.0 / BASIS 7.00 some time ago but I don't know how it look before the upgrade of the business system )
    rgds
    Dirk

    Hi Bavesh,
    Yes, It's correctly listed.  I did not manually link these components to the technical/business system. This happened automatically by the SLD data collector service. I also cleared the SLD cache several times,
    rgds
    Dirk

  • Variable Selection For User in Web Interface for BPS

    Hi All,
    I've created a manual Input sheet in BPS0 to upload target sales. User need to select the month, plant and then enter the target amount for each category. Its working fine.
    Now I need to create web interface for user to upload the data every month. Using BPS_WB I've created the interface (with help of Wizard). I'm getting the input sheet. But I'm not able to get screen where user can select the parameters?
    How to get this? It should work like web report, where user select the report variables then execute. Only difference here is user will have to enter the data for selected variable.
    Thanks in advance.
    Regards: Gaurave

    Hi....add the variables to a folder along with the layout. Then create the web interface.

  • I am having trouble with the handle bars for music fade in and fade out.  It doesn't work.  I also cannot see wave forms for music.   Cannot select - it is grey.  On a deadline and really having problems.

    I am trying to finish a video and I want to fade the music in and out.  I have read every tutorial I can get and the help info in iMovie.  Nothing helsp.   I cannot get it to fade by just sliding the handle bars.   Other times, the music mutes completely when I try to add a fade.   I try to view wave forms for music and it does not allow me to select .   it remains grey.   I am getting frustrated.  I had no problem with 11 version.   I now have 10.0.2 version.   Can anyone help?   my computer is latest Mac Book Pro 2013

    This is described in:
    http://help.apple.com/imovie/mac/10.0/#mov3b5ded23e
    A tip though - if you have a transition at the start or end of a clip it often obscures the fade handle.  Trick is to temporarly move the transition (or delete it), move the fade handle then replace the transition.
    Geoff.

  • Music Selection for a Birthday Party

    I am trying to select some good music for use in a movie of my son's 3rd birthday. I have been racking by brain listening to music clips but so far haven't been successful in finding anything that seems to work. Any suggestions on an album or song(s) that might be appropriate?
    Thanks for your creative assistance!
    PowerBook G4   Mac OS X (10.4.6)  

    Hello MacDouglas: a fine Scottish name you have there Lone Star poster!
    The obvious song for your wee boy's film is of course the "Happy Birthday to You" penned by a couple of American sisters and, believe it or not, actually 'owned' by a corporation who look for a substantial fee for its use. Be aware of that.
    I use on my iMovies the film music of the Italian maestro Ennio Morricone whom I believe to be the same soul as Mozart. Nevertheless, copyright is held on those materials, too. I recommend that ~ whatever you use ~ caption your movie at the end with credits both for music and any lyric; mention the publisher; and if it's from a CD it's best to purchase the CD, and give the name and label for that. Just in case! If you are seen to be promoting these materials, that will look good in the extremely unlikely event of litigation.
    I say all this, MacDouglas, because my suggestion it to use as music for the iMovie of your son's birthday party the materials of a notoriously litigious corporation ~ Disney. Don't let that put you off, though: just be conscious of what you are doing.
    The music for something like Disney's PINOCCHIO would be a good place to start: you should be able to hear snips of Disney music on the iTunes site: pieces you think sound right you can then maybe go and search to download, but purchase is recommended: it's the difference between 'appropriation' and outright theft.
    I trust your wee fella had a good time and his little contemporaries will, I am sure, enjoy seeing themselves and their parents will treasure whatever you eventually produce.
    Good luck and best wishes from London.

  • We are looking for music hits according to various decades.  iTunes used to have a hits of the 30s -90s etc.  I can no longer find it.  Any hints people?

    We are looking for music hits according to various decades.  iTunes used to have a hits of the 30s -90s etc.  I can no longer find it.  Any hints people?
    Also, what are the legalities about sharing music?  At what point does a song become part of the public domain?
    Thank you!  Gershawn

    Alli hello,
    Quit iTunes...
    Download Cocktail and start the program... click on the 'interface' Icon and tick 'Show Invisible Items' then click the Restart button...
    In a finder window click on the Icon that is your Boot Volume in the Side Bar ... select users ... select shared folder ... select the folder named 'SC info' and put it in the trash and empty it ... Do Not touch any other file.
    Pathway looks like this HD > users > shared > SC info > SC Info.sidb
    Go back to the Cocktail 'interface' window and untick Show Invisible Items and click restart .. quit Cocktail.
    Start iTunes after deletinng this folder and it will prompt you to enter your authorization information again ... see now if your problem still exists...
    Let's know how you get on Alli ... take care ... TP

  • Using M-Audio Fast Track C400 Audio Interface for FaceTime but only input 1 audio is coming through?...

    I'm trying to use my M-Audio interface for FaceTime/U Stream for music purposes. I'm a professional recording artist and I'd like to do some "live stream" concerts for fans from home. I have my keyboard in input 1 and my microphone in input 2. Both signals come through just fine when I'm using Garageband or Logic, but for some reason when I select the interface as the "microphone" option when streaming, only audio from input one is heard from my viewers. I've also switched the keyboard and mic to rule out the mic being the problem, but then the mic audio comes through and not the keyboard...I'm wondering if I'm missing some minute setting somewhere?...I don't understand why it's only for video chat applications that it's only receives one channel of audio...Any help would be appreciated, thanks.

    Are you using Logic 8 or 9?
    What are you trying to hear Logic's output through?
    If you're expecting audio output through built-in audio, and you're using Logic 9, make sure your Fast Track is set as the input device, and built-in audio is set for the output device (both in Logic's audio preferences)
    However, if you're using Logic 8 or 7, you need to create an aggregate device if you're using built-in output.
    Details here:
    http://discussions.apple.com/thread.jspa?messageID=8813763&#8813763
    OR
    use the FastTrack's audio outputs to drive your monitoring, NOT your built-in audio.

  • How can you use the same Apple ID for music and apps but have a different iCloud

    Collectively in my family we have 1 iPhone 2 ipod(4th gen) and 3 iPad mini's and we like to buy music and apps through the same Apple ID so that we can all share it but we also have a problem about the iCloud.
    My son has one iPod and one iPad and he would like his contacts and messages to be shared between HIS two devices but he would also like all of the pictures taken in the family to be shared
    The same for my daughter and for me.
    Is there a way of selecting which devices share what????
    Thanks a lot
    Acwills

    You could and should set up different iCloud accounts in "Settings > iCloud", so that every user has its own email account, calendars, reminders, notes, storage for backups and app data (files etc.), by the way everyone could also use his own account for iMessage (Settings > Messages > Send & Receive) and FaceTime (Settings > FaceTime) so that you all could write and call each other.
    Next the Apple ID for music, apps and other media: You all could just set up the ssame Apple ID in "Settings > iTunes & App Stores" for all your media purchases like songs, movies, apps etc.

  • How To... Change the Data Type for a SELECT-OPTIONS at run time.

    Hello,
    I am trying to restrict the values available for entry into a SELECT-OPTIONS at run time depending on user input.
    The logic is as follows. The user has two input fields. A PARAMETER field which has the type RSDIOBJNM and allows them to choose an InfoObject. And the user has a SELECT-OPTIONS field to allow them to select the Characteristic values for that InfoObject.
    I would like the following example to be possible:
    The user enters 0MATERIAL into the PARAMETER. When the user clicks on the SELECT-OPTIONS control code will derive a list of possible options the user can enter in the SELECT-OPTIONS. In this case only values found in the master data or at least no values greater than 18 characters.
    I have looked at the following function module SELECT_OPTIONS_RESTRICT and this do not appear to be helpful as they only restrict on the signs allowed for the values (unless I misunderstand, it is a complex function module!).
    The code I have so far is (thus the user enters a InfoObject into p_char1 and the select options so_char1 should only accept active values of that InfoObject):
    declaration of variables for user interface
      DATA c_char(32) TYPE c.
    declaration of count variable
      DATA i_count TYPE i.
    declaration of user interface
      SELECTION-SCREEN BEGIN OF BLOCK a1 WITH FRAME TITLE text-001.
        PARAMETERS: p_ipack TYPE RSLOGDPID.
      SELECTION-SCREEN END OF BLOCK a1.
      SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-002.
        PARAMETERS: p_char1 TYPE RSDIOBJNM.
        SELECT-OPTIONS: so_char1  for c_char NO INTERVALS.
        PARAMETERS: p_char2 TYPE RSDIOBJNM.
        SELECT-OPTIONS: so_char2  for c_char NO INTERVALS.
        PARAMETERS: p_char3 TYPE RSDIOBJNM.
        SELECT-OPTIONS: so_char3  for c_char NO INTERVALS.
      SELECTION-SCREEN END OF BLOCK b1.
    Is what I am trying to do possible???
    Thanks for any help. Ross.

    You really want to restrict possible values of a select-option based on another field, not change the length of type of the select-option field, right?
    Here is what you do:  Code a custom F4 value help for the select-option at event AT SELECTION-SCREEN ON VALUE REQUEST FOR..  The first thing you do here is read the value of the parameter field (p_ipack in your example).  You can use function module DYNP_VALUES_READ.  Based on this value, you can propose values for the select-option fields.  Note that the use can still enter whatever s(he) wishes in to the select-option field without pressing F4. In this case, you will have to code some input validations taking into account the value in the p_ipack field.

  • One search help for multiple select-options in webdynpro abap

    Hi,
    I need a way to use one search help for multiple select-options fields. My scenario is :
    I have a table for keeping different organizational units' values of different systems. I have pasted some sample data from this table at the end of this mail. On the screen I want to have 1 select-options filed for werks, and 1 select-options filed for vkorg. (In fact I will have more org. unit fields...) In the beginning of my application the user will select sid.
    If the user selects ADS as SID, when he opens search-help for the first org. unit (werks), he will see the records with SID: ADS, VARBL = $WERKS, LANGU = SY-LANGU.
    If the user selects AGT as SID, when he opens search-help for the second org. unit (vkorg), he will see the records with SID: AGT, VARBL = $VKORG, LANGU = SY-LANGU.
    I have created a search-help taking SIDD, VARBL and LANGU as import parameters; used field mapping and bound this search help to my table. I have created 2 context nodes : org1 and org2 having attributes SID, VARBL, VALUE, LANGU .
    I have assigned related SID, VARBL and Langu values to these attributes at runtime as I needed. That way, if I use input field and reference to the related context attributes org1-value and org2-value2 accordingly, search help works well as I want.
    However, when I use select-options field , I can not bind the field to the context data. I can give reference only to ddic structure. Is there any way to reference to a context attribute? I searched for this in SDN, but could find nothing.
    I think I won't be able to use this way. What do you say?
    As I read from forums maybe using OVS help will be suitable for me. But I have to use one search-help for all select-options fields. Do you know how I can determine the active select-options field and pass its name (for instance "werks" ) as parameter to this OVS search help. (Also I'll pass SID and LANGU.)
    MY TABLE (ZBYYT080) CONTENTS:
    SID     VARBL     VALUE     LANGU     VTEXT
    ADS     $WERKS     1     T     Werk 0001
    ADS     $WERKS     11     T     OZYAS  GIDA URETIM YERI
    ADS     $WERKS     5501     T     BOYA GEBZE FABRİKASI
    ADS     $WERKS     5502     T     BOYA CIGLI FABRİKASI
    AGT     $WERKS     2301     T     KAMLI DAMIZLIK
    AGT     $WERKS     9601     T     PANAR DENIZ URETIM YERI
    ADS     $VKORG     22     T     AA KİMYASALLAR
    ADS     $VKORG     8001     T     İINSAAT BOYALARI
    AGT     $VKORG     6500     T     DAMk St.Org
    AGT     $VKORG     5400     T     PANAR St.Org.
    I wish I'm clear enough..
    I will be gald if someone answers me as soon as possible...
    Thanks İn advance..
    MERAL

    Hi,
    Your ques is how to refer to a DDIC search help to refer to selection screen parameter ?
    Am I right ?
    If Yes, then in the interface IF_WD_SELECT_OPTIONS
    method ADD_SELECTION_FIELD, ADD_PARAMETER_FIELD etc
    have importing param like I_VALUE_HELP_TYPE and  I_VALUE_HELP_ID, I_VALUE_HELP_MODE, I_VALUE_HELP_STRUCTURE
    etc which may help you to link your create DDIC Search help to selection screen params.
    this is just a clue from my side. I haven't tried it myself.
    You can go to the where used list of this method and find some sample implementations which use these params.
    Hope this helps.
    Regards
    Manas Dua

  • HT204053 We have apple computer and set up 1 apple id and for music on iPods.  Now we have 3 apple phones and want to share the music but keep our contacts separate. what should we do.

    We started with an apple computer and set up 1 apple id and for music on iPods.  Now we have 3 apple phones and want to share the music but keep our contacts separate. what should we do? Right now we have the same apple id on the PC, ipodtouch, ipod, and 3 phones.  They said make seperate clouds?

    Hello there MizzouTrojan,
    If I understand correctly you want all 6 devices to have access to a single calendar that each device gets notifications for and can edit. You can do that with an private iCloud shared calendar. First sign into www.icloud.com and use these steps from the following article to share a calendar:
    iCloud: Share a calendar with others
    Share a calendar privately
    Click the Share button to the right of the calendar name in the sidebar, then select Private Calendar.
    Note:    You can also share the same calendar publicly. For instructions, see the next task, “Share a calendar publicly.” 
    Type the invitee’s email address in the Add Person field and press Return.
    Click the pop-up menu with the invitee’s name and choose access privileges (View & Edit or View Only). 
    For each person you want to share the calendar with, repeat steps 2 and 3.
    When you’ve invited everyone and set their privileges, click OK.
    Invitation emails are sent from your iCloud email address to the participants you specified.
    Thank you for using Apple Support Communities.
    Cheers,
    Sterling

  • How can I disable itunes on my iphone 4s?  I don't use it for music and need to prevent it from automatically activating when I plug in to my vehicle.

    How do I disable itunes on my iphone 4s?  I don't use the phone for music, and I need to prevent it from automaically playing music when I plug the phone into my vehicle.  I have attempted to delete all music from the device (so there would be nothing to play), but 1 song remains in the iphone memory and I have been unable to delete that song. 

    Olliev wrote:
    How do I disable itunes on my iphone 4s?
    iTunes app on the iPhone is for purchasing music.
    The fact the iPhone starts playing when connected to your car stereo is a function of your car bluetooth system.
    Consult your car dealer/bluetooth system manual.
    I have attempted to delete all music from the device (so there would be nothing to play), but 1 song remains in the iphone memory and I have been unable to delete that song.
    Connect the iPhone to computer and select it in iTunes.
    Click the Music tab and uncheck Sync music.
    Then click Apply at lower right of iTunes.

  • How do i get my iTunes account to search for music on my laptop?

    how do i get my iTunes account to search for music on my laptop?

    Hello lkrick0232,
    Welcome to the Apple Support Communities, you can easily added music to iTunes.
    Check out this article that will walk you through. I also copied the specific instructions for your system.
    Adding music and other content to iTunes
    http://support.apple.com/kb/HT1473
    Adding content on your computer to iTunes
    Open iTunes
    From the File menu, choose one of the following choices:
      ▪ Windows 
    Add File to Library
    Add Folder to Library
    Navigate to and select the file or folder that you want to add
    Happy Listening,
    -Norm G.

  • Is there a way to automatically import artwork for music already in librar?

    Is there a way to automatically import artwork for music already in library?
    I just transferred all my music from a PC into my new mac.
    I saw a widget that fetches the album artwork from the web. great fun!!!
    Now is there a way to fetch all these artworks automatically.
    I did not use istore to buy the music - but imported from my cd collection.
    Thanks.
    What a great system - simple and no hassles. Thanks Apple. Goodbye PC.

    If you are using AlbumArt widget you can do this with the widget interface.

Maybe you are looking for

  • Show static image then play 2 .flv

    I want to have a player that shows a static image to begin with and then plays 2 short .flv files, one after the other and then reverts to the static image. I've found this, which works beautifully for the static image and one movie clip but I don't

  • I would like to cancel my order

    I would like to cancel my order please

  • View Link  and HGrid - Urgent

    Hi, The hierarchy in HGrid can be constructed using the view link and a view object. If I want to associate a "Where" condition with the child rows of my "root Row", I need to relate the source view object with destination view object. How do I indep

  • Dreamweaver SEO and landing pages video tutorial

    does anyone know where I can find the tutorial by Richard John Jenkins about SEO and landing pages? It is a video tutorial in three parts; but I only found part two online. If someone can point me to this complete three part tutorial that would be gr

  • What exactly is a Connection Factory ?

    I'm still struggling with what a "connection factory" exactly is. We have a custom API and the first thing that we need to do, is obtain a connection from the connection factory. They say me that a connection factory is a "java base class"; but what