TV interference

Using airport express for wireless internet access and printing I find that it causes interference with certain chan nels on my TV> It is in close proximity to the TV. What can be done to eliminate the TV interference?

arnieh, Welcome to the discussion area!
(a) Move the AirPort Express physically away from the TV.
(b) Try changing the channel used by the AirPort Express until you find one that works better or you run out of channels.

Similar Messages

  • Red interference during capture with FCP 5.1.4

    I have FCP version 5.1.4 . I am using OSX 10.6 snow leopard (Macbook Pro). Have captured and edited without any problems. All of a sudden I am getting an interference during capture. This interference comes in the form of a bright red color which suddenly fills half my screen from corner to corner forming a right angled triangle and hiding half of my picture triangularly. it flashes and then remains. Anyone know what the **** this is and how I can rectify it?
    I would be EXTREMELY for any help anyone can give me. Thanks in advance.

    This is happening to me today as well. Has it got something to do with 10.6.7 I have just updated and now I seem to be having the same problem
    Pleasa Help

  • K7n2g-ilsr IGP graphics interference

    When using the IGP, I see moving diagonal lines on my desktop.
    I don't think it's a memory compatibility issue since I don't experience any reboots, lock-ups, crashes, etc. I suspect it's the PSU but I need a second opinion on this.
    I already experimented with the bios settings with no luck, even on default.
    Here's my specs:
    XP 1,700+
    MSI K7n2g-ilsr
    2 pcs. twinmos 512 ddr400 (twinmos chips)
    Enermax 330 watts (+3.3v=30A, +5v=32A, +12v=12A, combined +3.3v and +5v= 160W)
    I know that the 12v rail is too low, but like I said, I don't experience reboots and everything, just the annoying interference.
    I haven't got this problem whenever I use a separate agp card (geforce2mx)

    Your combined is low as well...should be more like 200W to get enuff power to this setup...
    Cheers!! 8)

  • Interference on display.

    I'm getting random interference patterns on the display. Sometimes an image will become distorted and have lines run through it. Has anyone had this problem? I've had this on iOS 4.2 &4.3 so I'm hesitant to say it's a software issue. These issues have also caused a lot of lag lately on my iPod.

    There are many reports of graphics issues after updating to 4.3, but I'm not aware of the same with 4.2.
    See this thread: http://discussions.apple.com/thread.jspa?threadID=2776843&tstart=25
    Peace.

  • Problems with ATI Radeon HD 2600, electrical interference or flickering pix

    Problems with ATI Radeon HD 2600, electrical interference or flickering pixels
    I have a Macro 8 core purchased just 4 months ago with the ATI Radeon HD 2600. Just started getting what looks like electrical interference or flickering pixels all over the screen. It gets worse and worse to the point where i see and cant work then clears up for an hour and then comes back.
    If I change the resolution from 1680x1050 to 1600x1200 everything looks fine and the problem goes away.
    Monitor works fine on two other computers, driver is up to date.
    Would like to upgrade at some point just disappointed that I’m already having problems.
    Any suggestions would be very helpful, in the mean time I’ll searching the forums.
    Thanks,

    When you called Applecare or went to a Genius bar were they of no help?

  • Is anyone with a Macbook experiencing interference with their iPhone's touch screen?

    At first I thought my iPhone's touch screen was broken so I contacted apple. Before we could finish our chat, my internet crashed and we couldnt finish. Tonight I'm on my MacBook air wathcing Netflix and trying to use my iphone to text. The interference is so bad that when i hold my thumb on the screen in one spot, the phone will scroll for itself and typing is practically impossible. Is anyone else expierencing this problem? This problem didn't exist with my 4, But when I use my computer, my 5S is practically impossible to use near my Mac.

    Nope.

  • Is there a way to actaully talk to someone at apple whereby it doesn't cost money? I downloaded an app and now the stupid phone says that there is compass interference and to move away from the interference. Well, I am in the middle of a field. Now what?

    Is there actually a way to talk to a service person at Apple where you don't have to shell out money? I downloaded an app that cost $9.99 and when I tried to use it I get a message that says there is compass interference and to move away from the interference or wave the phone in a figure 8 pattern. Well, now I have a sore arm from constant waving out in the middle of a field and it appears that is going to cost $29 to talk to a person. Does anyone have any idea why this is occuring? As a side note, I can use a normal compass with no issues so it is the phone. From a customer perspective, this is poor customer service.

    First of all, an idle threat is one that a person has no intention of carrying out. In the past 16 months that I have had this phone I have become less and less satisfied and found that it is like much of today's technology....over rated and under performing. The one thing that I have never been accused of is not wanting, or not giving help but when a company makes itself unavailable to resolve issues and leaves it to forums run by users helping users, it speaks more about the company than anything else they could do. As I said, I do not make idle threats and I did not threaten you in any way. Guess I'll call this topic done with as it is not and was not the intent to get a war started    

  • Max retransmissions & interference threshold

    We're getting complaints about a specific 1131AG in the field only being intermittently accessible. WCS shows both the a and b/g interfaces randomly bouncing, sometimes the reason for the bounce is unknown other times it says it's because it lost connection to the controller. I can ssh into the WCS but the engineer who setup the AP's doesn't seem to have enabled remote access via telnet or ssh.
    We are also seeing these events:
    802.11a interface of AP * is down: Controller 172.17.0.10 Reason: Max retransmissions for the AP have reached.
    Interference threshold violation reported by '802.11b/g' interface of AP *, connected to Controller '172.17.0.10'.
    I know I can adjust the threshold percentage, but that would only seem to mask the issue.
    WCS gives this version info on the AP:
    Versions
    <DIV style="DISPLAY: block" id=versions mcestyle="display: block;">
    Software Version
    6.0.202.0
    Boot Version
    12.3.8.0
    Inventory Information
    <DIV style="DISPLAY: block" id=inventoryInfo mcestyle="display: block;">
    AP Type
    CAPWAP
    AP Model
    AIR-LAP1131AG-A-K9
    IOS Version
    12.4(21a)JHC
    AP Certificate Type
    Manufacture Installed
    AP Serial Number
    Unique Device Identifier (UDI)
    <DIV style="DISPLAY: block" id=udiInfo mcestyle="display: block;">
    Name
    Cisco AP
    Description
    Cisco Wireless Access Point
    Product Id
    AIR-LAP1131AG-A-K9
    Version Id
    V01
    Serial Number
    <BR type="_moz" mozdirty>WCS CLI shows this version info:
    (Cisco Controller) show>sysinfo
    Manufacturer's Name.............................. Cisco Systems Inc.
    Product Name..................................... Cisco Controller
    Product Version.................................. 6.0.202.0
    Bootloader Version............................... 1.0.1
    Field Recovery Image Version..................... 6.0.182.0
    Firmware Version................................. FPGA 1.3, Env 1.6, USB console 1.27
    Build Type....................................... DATA + WPS
    System Name...................................... FLDS-5508-01
    System Location..................................
    System Contact...................................
    System ObjectID.................................. 1.3.6.1.4.1.9.1.1069
    IP Address....................................... 172.17.0.10
    Last Reset....................................... Software reset
    System Up Time................................... 247 days 5 hrs 0 mins 52 secs
    System Timezone Location......................... (GMT -5:00) Eastern Time (US and Canada)
    Current Boot License Level....................... base
    Current Boot License Type........................ Permanent
    Next Boot License Level.......................... base
    Next Boot License Type........................... Permanent
    Configured Country............................... US  - United States
    More or (q)uit
    Operating Environment............................ Commercial (0 to 40 C)
    Internal Temp Alarm Limits....................... 0 to 65 C
    Internal Temperature............................. +35 C
    External Temperature............................. +20 C
    Fan Status....................................... OK
    State of 802.11b Network......................... Enabled
    State of 802.11a Network......................... Enabled
    Number of WLANs.................................. 3
    3rd Party Access Point Support................... Disabled
    Number of Active Clients......................... 100
    Burned-in MAC Address............................ 2C:54:2D:72:74:40
    Power Supply 1................................... Present, OK
    Power Supply 2................................... Present, OK
    Maximum number of APs supported.................. 75
    Thanks!
    Jim

    Hi Scott,
    I don't see a method on this forum to directly attach a document to a post other than embedding an image or a video...? In the interim, the remainder of your request is below.
    2067-LakewoodShores#debug capwap console CLI
    Debug already enabled
    2067-LakewoodShores#dir
    Directory of flash:/
        2  -rwx      295424  Dec 18 2012 12:04:05 +00:00  crashinfo_20121218-120402
        3  -rwx      298851  Sep 24 2012 16:28:51 +00:00  crashinfo_20120924-162848
        4  drwx         128   Jan 1 1970 00:02:37 +00:00  c1130-rcvk9w8-mx
       36  drwx         320  Aug 27 2012 15:55:58 +00:00  c1130-k9w8-mx.124-21a.JHC
       34  -rwx       97500  May 14 2013 14:05:46 +00:00  event.log
        8  -rwx        6168  May 29 2013 23:03:53 +00:00  private-multiple-fs
       10  -rwx         189  May 29 2013 23:03:52 +00:00  env_vars
    15482880 bytes total (7936512 bytes free)
    2067-LakewoodShores#del flash:crash*
    Delete filename [crash*]?
    Delete flash:crashinfo_20121218-120402? [confirm]
    Delete flash:crashinfo_20120924-162848? [confirm]
    2067-LakewoodShores#dir
    Directory of flash:/
        4  drwx         128   Jan 1 1970 00:02:37 +00:00  c1130-rcvk9w8-mx
       36  drwx         320  Aug 27 2012 15:55:58 +00:00  c1130-k9w8-mx.124-21a.JHC
       34  -rwx       97500  May 14 2013 14:05:46 +00:00  event.log
        8  -rwx        6168  May 29 2013 23:03:53 +00:00  private-multiple-fs
       10  -rwx         189  May 29 2013 23:03:52 +00:00  env_vars
    15482880 bytes total (8530944 bytes free)
    2067-LakewoodShores#undebug all
    All possible debugging has been turned off
    2067-LakewoodShores#

  • Chronic interference on phone line and broadband drifting in and out

    hi, could I speak to an advisor please.  We have chronic interference on our phone line and our internet keeps drifting in and out, it has been like this since Tuesday.  I have done all the necessary checks including unplugging all the equipment and plugging a corded telephone into the test socket and it is still the same with the corded phone plugged into the test socket, so I'm guessing there is a fault on the line.  I need sky to do a line check for me.

    chellechllb wrote:
    hi, could I speak to an advisor please.  
    Yes. Give Sky a call.
    Sky won't respond here, or elsewhere, to your post as this is a customer to customer forum.

  • I upgraded from a 1st generation to the 4th generation Time capsule Model A1409.  Since then I am getting interference on my wireless transmitter that sends signals from my Pay TV box to another TV downstairs.  Is it the dual frequency and how do I stop i

    I upgraded from a 1st generation to a 4th generation time capsule (model A4109) and since then my pay TV wireless transmitter has pulsating interference.  This is obviously due to the new dual band  frequency of the TC.  Is there any way I can set it to one band and what will that do?

    Go in and manually set the wireless channel for 2.4ghz or 5ghz (whichever your av sender is).. try different channels.

  • Individual emails are deleted without my interference, and no longer be found

    Individual emails are deleted without my interference, and no longer be found. In one case I could restore the email with time-machine, in the other case there is no time machine backup for that time stamp.
    How can this happen ? Is there a hadware problem or a virus ?
    manny thanks
    Ole

    You don't need to get your domain name registrar to do this - you should easily be able to do it yourself.
    Firstly, ensure that your domain name is entered into the Personal Domain name setting of your MobileMe account.
    Go to your domain name registrar and then set up CNAME forwarding if they provide this and forward your domain name to web.me.com - this is all you need do - you don't need to fiddle with nameservers or anything else like that.
    If they don't provide CNAME forwarding then you can use web forwarding instead.

  • All Of a Sudden Telephone Interference?

    I have a UFO styled Airport Extreme base station linking a Mac PowerBook Pro, a G3 Breadbox, an older Dell PC and via USB, an Epson printer. This system has worked almost flawlessly for nearly two years, but now problems are occurring.
    The wireless printer link has failed repeatedly and can no longer be re-established. The printer works fine when hard wired via USB to any of the compurters.
    Within the last two months our 2.4gHz cordless telephone has begun interrupting the Airport signal. As soon as the telephone rings in its base or is turned on the Airport signal is lost. The situation is worse with the MBP and the PC. Both are farther from the base station and the phone is usually close to line of sight between either computer and the base station. The Airport link is re-established as soon as the telephone is turned off.
    My question is; Could the base station be gradually failing? It was purchased used and I have no idea of its history.

    My question is; Could the base station be gradually failing? It was purchased used and I have no idea of its history.
    It's possible, but most likely the problem is Wi-Fi interference from operating a 2.4 GHz device within range of your 802.11g (also 2.4 GHz) AirPort. Before attempting to replace either the base station or cordless phone, I suggest that you consider changing radio channels on both (if the phone supports this) to the "opposite" ends of 802.11g band: 1 & 11 or 1 & 14 if outside the US.
    Note: This issue is NOT unique to the AirPort and can happen to any manufacturer's wireless device operating in the same radio band as the cordless phone.
    Your other option is to ditch the 2.4 GHz phone and get one that operates in either the 900 MHz or 5 GHz band ... or, of course, use a corded phone.

  • Im from argentina and i got a problem with my earphone of the iphone 4s when i make a call i earphone or speaker make and strange noise or like an interference during the call and when i finish the call still doing the same noise and i dont know why?

    my eraphone of my iphone 4s white unlocked make strange noises during the call and still doing the noise like an interference or saturing the spekaer

    This is a common problem with iPhone 4s (and IOS 5)  There isn't ' anything you can do about it, so you're best bet is to go down to the store and get an exchange. If you have an older iPhone (3gs/4) roll back your update from IOS 5 to IOS 4.

  • My itunes is playing up. every time I play a track or album I get a crackling interference noise. What's this all about and how can I stop it?

    my itunes is playing up. Every time I play a track or album I get a crackling interference noise.  It sometimes abates for a while but then comes right back again!What's this all about and how can I stop it?

    See if this article will help:
    iTunes and QuickTime for Windows: Audio does not play or plays incorrectly
    http://support.apple.com/kb/TS1362

  • TV causes interference with powerline adapter

    I just had infinity installed and I have a problem with my powerline adapters, which is next to the TV (it is for the sky+ box for sky go). The powerline adapters are TP-Link tl-pa211 and the TV is a Panasonic th-37px70b.
    When the TV is on, the maximum I can get through the ethernet powerline is 14mb/s, but if the TV is off or on standby I can get close 40mb/s (i.e. the maximum on the broadband line). The TV is on a wall bracket so it is difficult to move.
    I have tried:
    TV in room 1 connected to socket in room 1 and powerline in room 1 - 14mb/s when tv is on, 40mb/s when tv is off/standby.
    TV in room 1 connected to socket in room 1 and powerline in room 2 - 40mb/s constantly.
    TV in room 1 connected to socket in room 2 and powerline in room 2 - 40mb/s constantly.
    TV in room 1 connected to socket in room 2 and powerline in room 1 - 14mb/s when tv is on, 40mb/s when tv is off/standby.
    It seems it is the actual TV that is directly causing the interference with the powerline adapater, not the TV causing interference in the electricity line. I'm not sure how it can interfere directly.
    Has anyone had anything like this before or is the TV just faulty?

    Thanks for you reply. I have tried the TV connected directly to the socket and the powerline connected to a seperate twin socket about 1 meter away and I still get the problem when the TV is on. Also, I have connected the TV to a power socket on the other side of the house with a extension cord while not actually moving the TV and the powerline adapter connected to a socket near the TV and this still gives the same problem when the TV is on. And then, with the TV still on the extension cord to the otherside of the house, I connected the powerline to the same twin socket as the extension cord and this produced no problems.
    So, it must be the physical proximity of the TV with the powerline adapter that is causing the problem. So could the TV be emmitting some frequency that is interfering with the powerline adapter?
    I actually use a wireless powerline adapter (TP-Link TL-WPA281) in the socket, but for testing this problem I use the non-wireless version (TP-Link TK-PA211). And according to this thread, the BT Hub 3B isn't compatible with wireless extenders. Why is upgrading to infinity so annoying?

  • Since updating to 706 the sound on my ipad2 is not working right. On videos or music. There is constant distortion and what sounds like interference. Any ideas?

    Since updating to 706 the sound on my ipad2 is not working right--on videos or music. There is distortion and some kind of interference at all times. Any ideas?

    Has the unit EVER been jailbroke?
    If "No," first try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  It could take well over an hour!  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow the on-screen directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore, go into Recovery Mode per the instructions here.  You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again.  Also, if you have IOS-7, read this.

Maybe you are looking for